CSM Http redirect
Hello,
Is it possible to configure the following redirect
connections to www.mydomain.com/news/home.html
redirected to
www.anotherdomain.com/sorryserver/sorry.html
I have read the doco on this but at the following url
http://www.cisco.com/en/US/customer/products/hw/switches/ps708/module_installation_and_configuration_guides_chapter09186a008011c65f.html#wp1012610
It says about the webhost relocation configuration
"Only the beginning of the URL can be specified in the relocation string. The remaining portion is taken from the original HTTP request".
What does that mean exactly?
Thank you.
look at this example
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_example09186a00802877f6.shtml
The %p feature is the PATH.
So in your example %p = news/home.html
But since you don't want to use it in your redirect, you don't need it.
Just configure the full path in the webhost location.
Regards,
Gilles.
Similar Messages
-
Problem we are having:
A client opens an HTTPS connection to a CSM with SSL offload to SSL module. The decrypted clear HTTP request hits the IIS server and is redirected (301).
The client gets an HTTP redirect and not an HTTPS redirect.
The reason for the 301 redirect is the IIS server does not have a physical resource but rather a virtual directory so it issues a 301 and adds a /. eg https://www.cisco.com/tech is redirected to https://www.cisco.com/tech/ in a working situation.look for the urlrewrite command in order to change HTTP into HTTPS.
Regards,
Gilles. -
HTTP Redirect based upon SRC IP Address
Is there a way to perform an http redirect based upon user's source IP address on the CSM/GSS environment?
Logic:
IF < src ip address is within exception list > THEN
http redirect to URL2
ELSE
http to URL1
ENDIs there a version of this solution (redirect by client source IP) for the CSS?
I'm attempting to redirect clients from a few specific networks (source IP's) to the VIP of a second CSS using a service-type redirect and "prefer " ACL commands:
clause 10 permit any 1.1.1.0 255.255.252.0 destination content owner/content-rule prefer service-type-redirect
There is an "any any destination any" last clause in the ACL for the remaining source IPs. The ACL is applied to the incoming circuits leading to the webservers.
A show of the ACL's shows all responses - no matter the client source IP - being caught by the permit any clause at the end of the ACL.
Extra points: this is a one-arm design with source group destination applied (to return server traffic to the CSS) and traffic is https with SSL terminating at the servers (no SSL module). Content rules are set to be sticky for srcip. Both CSSs are answering content-based DNS queries for the same URL with their local VIP address (but controlling which DNS server clients query isn't readily possible, so static proximity using DNS didn't provide the answer).
Each CSS is in a different data center: the idea is to keep traffic local by redirecting non-local traffic to its "local" (the other) CSS if services are active (and to keep traffic on the first CSS if the services at the redirected-to CSS are down).
Don't want too much, do I? ;-)
Thanks for everyone's time -
-K. -
SharePoint public facing site does not open in sharepoint designer after giving http redirect in IIS
I have a public facing sharepoint site
We gave http redirect in IIS due to which I am unable to open the site in SharePoint Designer and gives error message site not found in webserver.
If i revert back the settings (remove the http redirect link) i m able to open the site in designer.Please let me know how can I resolve the issue in opening site in SharePoint designer after http redirect setting done in IISLooks like an AAM issue. What URL of the site you are trying to open with designer and what are your AAM settings?
Ronald Bruinsma - Independent SharePoint Consultant - iDocs.info - The Netherlands
Ronald I got the same issue here is my info:
sharepoint site: http://<servername>/sites/mycompany
<ServerIP>
Default
http://servername
<Servername>
Default
http://servername
http://contoso.mycompany.com
Extranet
http://contoso.mycompany.com
In IIS webapp 80. http redirect:
redirect requests to this destination is checked: http://contoso.mycompany.com/sites/mycompany
can you help me? thanks -
I am having a problem getting into the App Store on my iPhone since the recent update, I have a 4s and it appears the feature tab is not working. When I try to go into the feature tab in the App Store I get a message "too many HTTP redirects" ?... Does anyone now hoe to fix this issue, the other tabs are working okay and everything is working on my iPad ?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
How are you supposed to REPORT THE PROBLEM when it DOESN'T EVEN WORK!!
I clicked it as I got a receipt for something that HAS NOT EVEN BEEN BOUGHT ! (It's funny how apple try to charge me twice for something when I work nightshift and my phones switched off!)
and all that happened was it came up saying "too many HTTP redirects" .
And it won't let me report it ! XGo here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report your issue to the iTunes Store.
Regards. -
I purchased 2 packages of gems for skylanders and only received 1 package. Got email receipts and tried to report problem with link in email on my ipad2 and it keeps coming up with to many https redirects. Can anyone help? Just want my gems :).
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
How do I get rid of (to many HTTP redirects) from my App Store
Every time I go to categories or top 25 I cannot get in it keeps saying to many HTTP redirect how can I fix this
It did not start until I had my phone reset. And I try resetting my phone again and it won't even reset nowClearing the History and Cookies on Safari then closing safari from the background has helped me with this issue
Go to Settings then click on Safari. Once there, clear the cookies and data. Then go into safari app then clear the history. Once you do that, close safari from the background by double clicking the home button, hold the app then hit the red - to close. -
Every time I open the app store on my iPod touch, it says 'too many http redirects' whenever I click on the Categories and Top 25 tabs. I tried force quitting the app store, that didn't work. I tried closing all windows in Safari and force quitting safari, also didn't work. I reset the network settings, that didn't work either. When I reset all settings, it appeared to work. The tabs were different (it had a Genius tab), but it worked. However, immediately after force quitting the app store (I force quit a lot to keep as much RAM clear as possible), the same thing happened again. Does anyone know a permanent, Apple-supported solution to this problem? And please do not say restoring it. I don't want to start from scratch just to potentially experience the same problem.
See:
to many HTTP redirects: Apple Support Communities
However, it seems to be an Apple/network problem beyond your control -
I need to know how to force a https redirect in Adobe Muse if this can't be done please tell me so I don't waste any more time... please
Protocol usage and redirects are a server-side thing. This has nothing to do with designing the web page and thus nothing with Muse, either.
Mylenium -
Setting HTTPS redirect in NetWeaver CE 7.1 EhP1
I would like to redirect all HTTP requests such that users will always use HTTPS access. I found an OSS note 973644 that explains the steps for non CE environments. Does anyone know how to setup HTTPS redirect on NetWeaver CE 7.1 Ehp1?
Regards,
AsifHi Lee,
I think I know how to solve this. I have just solved a similar problem with my PI 7.1 EHP1. Deployment in JSPM of various software components all failed like this example:
JSPM log:
Deploy status is 'Aborted'
Client path '
pi71\sapmnt\trans\EPS\in\SAPXIAF04_7-20002649.SCA'
Description:'1. ERROR CODE DPL.DS.5089 Exception during generating components of sap.com/com.sap.aii.af.app application in webservices_container container.
-> com.sap.engine.services.webservices.espbase.configuration.BindingData.getConfigurationType()I'.
Default Trace:
Caused by: java.lang.NoSuchMethodError: com.sap.engine.services.webservices.espbase.configuration.BindingData.getConfigurationType()I
at com.sap.engine.services.webservices.server.deploy.WSBaseAbstractDProcess.getBindingDataId
After that most of the browser based admin apps, such as NetWeaver Administrator ( /nwa ), would refuse to start.
But finally after several tests, searching on SDN+SMP and restore to backup version I found the solution in [SAP Note 1328776|http://service.sap.com/sap/support/notes/1328776] which describes a similar problem: Update to the newest version of ENGINEAPI 7.11. Today this is ENGINEAPI04P_4-20002603.SCA.
You may also want to make sure that you are running the newest version of the Configuration Wizard, so you should check/update LMTOOLS, LMCTC and LMCFG*, currently LMTOOLS04P_3-20002705.SCA, LMCTC04P_1-20002694.SCA and LMCFG04P_4-20002729.SCA.
I hope this proves to be useful.
regards
Mauri -
Http redirects not changing url in address bar
I'm going crazy trying to fix a major bug in our application. Http
redirects are not changing the url in the address bar of the latest versions of internet explorer. But this only happens if the redirected page is an xml page with an xslt reference for the browser to do the transformation. Mozilla seems to work fine, but I seem to have encountered a major bug in Internet Explorer. If anybody can help or at least point me in a direction I'd be SO grateful. This doesn't seem to be a java servlet specific issue, but that's what we're using so I thought I'd ask the question here too.
We have an MVC type framework we developed. For example, if you were to add something to a shopping cart, the url might be:
http://ecommerce.com/cart/add?sku=54321. In the add servlet, we would add the sku to your shopping cart and then redirect to, let's say,
http://ecommerce.com/displaycart. I think this is how most MVC frameworks work. And it works great for us.
The problem began when we started sending XML to the browser with an XSLT stylesheet. So now the browser does the transformations (if the browser is capable of doing them, which we check) instead of the server. This is a major part of our project. One of the reasons we started this.
The problem is that Internet Explorer no longer updates the url in the
address bar after a redirect. Mozilla works great though. We haven't
tested on other xslt capable browsers yet. In the example above, what would happen is after adding something to your shopping cart, the "displaycart" page would be shown but the http://ecommerce.com/cart/add?sku=54321 url would be shown in the address bar. It wouldn't seem to be too big of a deal since everything works. But now all the relative links are messed up. They start from the "cart" directory. So we need absolute links. But that introduces many other problems. We then need to know the host and the parent directories (not as easy as it seems).
So is there a solution? Is this a big bug that nobody has realized yet (or maybe they have, but my searches don't see it) in internet explorer? Is there a way for the redirected url to appear in the address bar from a browser-based xslt transformation in internet explorer? By the way, I'm testing with the latest version of IE6.0 as of July 7, 2003.
When testing, redirects work perfect if I do the xslt transformation on the server side and just send plain html to internet explorer. And it works perfect with either serverside or browserside xslt transformations in mozilla.
Scott Mueller
AccelerateBiz IncorporatedAs I've been reading in the specs, microsoft, etc, it seems that it's not what's supposed to happen. But the specs are not very specific about this. However, internet explorer DOES always replace the url in the address bar with the redirected url if HTML is being returned from the redirected servlet. As is the case with all other browsers. So, at least, this behavior is the de-facto standard.
BUT when the redirected to page is an xml page which references an xslt stylesheet.. then, ONLY in internet explorer, the original url is what's shown in the address bar (and, more importantly, what's used as the base url). Regardless of what the links look like or how they're manipulated in the transformed HTML that ends up being shown, I can't seem to make the url in the address bar the redirected url.. -
Http redirection limit in safari
Hi,
I'll try to be as clear as possible about my question:
Situation
I took 10 Macbook Air's out of their boxes, installed Mountain Lion and installed the latest updates.
When visiting a (Citrix) portal, i have no issues with Safari after logging in and clicking on the presented ICA file.
Next, i took 10 Macbook Pro's out of their boxes, repeated the same steps to install and update them. When visiting that same portal, logging in with the same credentials, i get errors in Safari about too many HTTP redirects.
Research on this topic
I've researched this error, many people blame the website your visiting. this is wrong in my case, since the first 10 laptops didn't show that error.
It is advised to reset Safari; i tried. didn't solve my problem. Besides, why would it make a difference since the first 10 laptops didn't get that error ?
It turned out, after Googling some more about this, that each browser (Safari, Chrome, Firefox, Opera) has a limit set for HTTP redirections (the default amount of max. redirections is 20).
On lots of websites people fixed this issue bij installing FireFox, which i is my preferred solution; i want my customers to just use Safari. But, for being sure if this would indeed solve the issue i tried this solution: in about:config changing the properties for HTTP redirection settings from 20 to some higher value (i used 999 in my test) fixed the issue. This seems to be the proof getting the "too many HTTP redirections" isn't neccesarily caused by the website. It is caused by the restriction of having a max ammount of http redirections in Safari.
The Question
In Safari 6, how do i change the max ammount of HTTP redirections ?
Is there some sort of hidden preference pane ?Then, your only action is to follow its steps:
If the issue persists, sending feedback to the affected website may help. You can also send feedback to Apple by choosing Safari > Report Bugs to Apple.
Also, a google search for redirects site:developer.apple.com
yields
http://developer.apple.com/library/mac/#documentation/cocoa/conceptual/urlloadin gsystem/Articles/RequestChanges.html and
http://developer.apple.com/library/ios/documentation/Foundation/Reference/NSURLC onnectionDataDelegate_protocol/NSURLConnectionDataDelegate_protocol.pdf -
What does "Too Many HTTP redirects" please? I am trying too report a purchasing problem, but keep getting that message. I'm trying to connect too ITunes.
Susiebwb wrote:
Can any one please assist me.... I paid twice for an app by mistake.... ...
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2. I can get no further as a report code keeps appearing saying too many http redirects so I can not get any further.
I have also sent 3 emails to the company if Smart Office 2 with no response.
How do I report my dissatisfaction which is growing with the frustration of not being able to contact any one!
Zena PartonI have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2. I can get no further as a report code keeps appearing saying too many http redirects so I can not get any further.
I have also sent 3 emails to the company if Smart Office 2 with no response.
How do I report my dissatisfaction which is growing with the frustration of not being able to contact any one!
Zena Parton
Maybe you are looking for
-
Assets are not visible in BCC.
Hi All, I modified child category and its product. The modified assets are visible from Content Administration Tab. But when we click on the project in merchandising the modified assets are not visible. When I change the site attributes a
-
What is Java Applet 1.0, and why does it launch when I do an applet action?
When I go to http://www.chemaxon.com/marvin/sketch/index.php with Safari 5.1.7 on MacOS 10.6.8, an applet launches. If I then click and hold on one of the toolbars of this applet and drag to the left, the toolbar is supposed to detach. Instead, my
-
Search string for most wordmatches in database
Hello! I'm working on a chatbot program and I need to make a search engine in flash. I already have on searchengine that search a string (with the users inputtext in it) and compares it to phrases in a database ( a xml file in this case). But I also
-
Best quality export: Beta Sp or DVD?
Hi- Ive searched the forum for an hour so forgive me if this has been addressed. I built a movie in CS3: it is 1440 X 1080, 29.97 fps. I would like to export it for a film festival to get the best possible results. They do not have a blu ray player.
-
How can we control TDS exemption at TAN / Business place level.
Hi Team, How can we control TDS exemption at TAN / Business place level. Example Scenario We have a case where one company code "XYZ" has 4 Plants AA, AB, AC & AD etc. Each plant has different unique TAN no. One of our vendor has produced has TDS exe