CSM reporting failed ARP request

Hi!!
We have a CSM on Catalyst 6509 SUP720, the IOS is 12.2(18)SXD7b.
We have a problem with load-balanced portal servers with the CSM. Checking Catalyst log we see the following messages:
Jun 7 06:17:42.145 UTC: %CSM_SLB-6-RSERVERSTATE: Module 4 server state changed: SLB-NETMGT: Server [ip address] failed ARP request
Jun 7 06:17:43.505 UTC: %CSM_SLB-6-RSERVERSTATE: Module 4 server state changed: SLB-NETMGT: Server [ip address]now responding to ARP requests
Jun 7 06:19:23.445 UTC: %CSM_SLB-6-GATEWAYSTATE: Module 4 gateway state changed: SLB-NETMGT: Gateway [ip address]failed ARP request
Jun 7 06:24:12.241 UTC: %CSM_SLB-6-GATEWAYSTATE: Module 4 gateway state changed: SLB-NETMGT: Gateway [ip address]now responding to ARP requests
At the begining, the message were on refer to failed ARP for the real servers, but now the CSM reports failed ARP request on the Gateways (Vlan Interfaces) too.
Any idea?? We don?t now if the problem is the network, or is the CSM Card or the IOS version.
The Catalyst 6500 is on Distribution Layer, connecting 4 Access switches (Enterasys) and 2 Core Cat6500 switches. The balanced servers are on a Access Enterasys N7 Switch.
Thanks in advance...
Pedro

Hi Gilles, thanks for your quick response.
But, as well as the problem with missing ARP?s, we have very slow responses and sites pages are shown with missing objets every time we point to the CSM virtual address with 2 internet proxi servers on a CSM Serverfarm, while if we point to the Real IP Address of any proxi-sever, all is fine and fast.
Now we are pointing directly to real servers (not to the CSM virtual), and all is fine, but it is not the final idea.
It sounds like a problem with the Channel betwen the CSM and the Switch.
We made traces monitoring the PortChannel 260, and we saw very ARP request but just a few replys.
Is very strange that also the CSM is reporting missing ARP?s on Gateways, because this gateway is an interface Vlan into the MSFC!! The only way to disappear the log missing ARP messages is configuring static arp on CSM.
What you think about?.
The version on CSM is 4.2(2)
Thanks!!
Pedro.

Similar Messages

  • Report deployment process failed to request management pack list from SQL RS Server. The operation will be retried.

    I am encountering following event log in SC2012 Operations Manager and Reporting Tab is not loading in Operations Console.
    Report deployment process failed to request management pack list from SQL RS Server. The operation will be retried.
    Exception 'WebException': The request failed with HTTP status 401: Unauthorized.

    Hi,
    Can you acess http://reportserver/reports from a web browser on the OpsMgr server?
    Moreover,you can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot
    as necessary if it fails to connect.
    For more information, please review the link below:
    The easy way to test SQL connectivity
    http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Report failing with error

    Hi All,
    Application R12.1.3 with Shared Application Tier 2 nodes
    Database : 11g R 11.2.0.2 with RAC 2 nodes with ASM
    We have a concurrent program which gets fired when submitted thru API . For each order program is run once . If there are more orders it will run n number of times . At this time one request is failing with error
    REP-0004:
    REP-0069:
    REP-57054:
    But for the same failed request when we run separately(with same parameters) it is completing Normal . There is no other error in Manager Logs.
    please help what can be the issue.
    thanks
    Mapps

    Please see the following docs/links.
    Concurrent Processing - Concurrent Reports Failing With Errors REP-0004,REP-0082 and REP-0104 [ID 844976.1]
    https://forums.oracle.com/forums/search.jspa?threadID=&q=REP-0004+AND+REP-0069+AND+REP-57054&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    If the links did not help, please enable trace/debug and see if you get more details about the error and post the contents of the log file then -- How Can Trace and Debug Be Turned On For A Concurrent Request? [ID 759389.1]
    Thanks,
    Hussein

  • XML Publisher report failing with java.lang.outofmemoryerror.

    Hi,
    We have developed a custom Oracle report that produces an XML output file that is about 13M in size (about 18K rows from the database). When running report as concurrent request, post processing fails with java.lang.outofmemoryerror. The failure occurs when specifying output format as Excel, RTF or HTML. However, the process completes successfully when specifying output format as PDF. We have also noticed that Excel, RTF and HTML will complete successfully if the XML data file is smaller (around 3M).
    Is anyone aware of a restriction on the size of the XML data file when specifying output formats Excel, RTF or HTML? We have tried setting temp directory but that has not helped.
    Thanks.

    Hi
    I found this at metalink [Note:390968.1].. hope it helps =)
    Symptoms: When attempting to run an XML Publisher concurrent program the following error occurs:
    ERROR: Warning!!! Got out of memory exception, retrying with scalable option..
    Exception in thread "main" java.lang.OutOfMemoryError: Java heap space
    Oracle.apps.xdo.oa.cp.JCP4XDODataEngine
    Program exited with status 1
    Solution: To implement the solution, please execute the following steps:
    1. Login select the responsibility: System Administrator.
    2. Navigate to Concurrent > Program > Define.
    3. Query for concurrent program that is receiving the error.
    4. In the 'Options' field please enter -Xmx512M.
    5. Save the change and retest the issue.
    6. If the report still fails with the option set to -Xmx512M change the value to -Xmx1024M, save and try again
    7. Migrate the solution as appropriate to other environments.

  • Load Report failed when opening Report under IIS 5.1

    I recently upgraded to Crystal Reports 2008 (12) from Crystal Reports Basic 2008 (10.5).  I am using Visual Studio 2008 with the CrystalReportViewer.  Now when I run my reports from the website under IIS 5.1 (Windows XP SP3), I get a Load Report Failed.  The detailed exception follow:
    Error loading report (ConfigureCrystalReports)
    CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException (0x800001F5): The Report Application Server failed at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() --- End of inner exception stack trace --- at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) at ncspo.ReportViewer.ConfigureCrystalReports() in D:\Websites\NCSPO\FIS\ReportViewer.aspx.vb:line 43
    If I run the report using the ASP.Net Development Server, the reports run fine.  It only fails under IIS.  From other posts, I understand that i need to grant the Network Service and IIS_WPG group read/write permissions to the windows\temp folder.  I have done this for the Network Service, but the IIS_WPG group was not introduced until IIS 6.0.  Any ideas on how I can get this working under IIS 5.1?
    Here is the code behind page:
    Private Sub ConfigureCrystalReports()
                Try
                    rpt = New ReportDocument
                    Dim strReportFilename As String
                    If Len(Request.QueryString("ReportFilename")) > 0 Then
                        strReportFilename = Request.QueryString("ReportFilename")
                    Else
                        strReportFilename = System.Configuration.ConfigurationManager.AppSettings("cr404Page")
                    End If
                    Dim strReportPath As String = System.Configuration.ConfigurationManager.AppSettings("ReportPath")
                    Dim strReportFilePath As String = strReportPath & strReportFilename
                    Dim strReportFilePath_Full As String = Server.MapPath(strReportFilePath)
                    rpt.Load(strReportFilePath_Full)    <--- Exception occurs on this line
                Catch ex As Exception
                    lblStatus.Text = "Error loading report (ConfigureCrystalReports)"
                    lblStatus.Text &= "<BR>" & ex.ToString()
                    ncspo.clsMisc.LogError(ex, Me)
                End Try
            End Sub

    Am I correct in reading the following 2 documents that IIS 5.1 is not supported?
    If you check this document.  It shows IIS6 and 7 no support on 5.  See page 6
    [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f05523e4-35c4-2b10-2c89-9fcf64b0dd22]
    This document also on page 5
    [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a87366-da1d-2b10-e1b4-a37ab37a2dea]
    Thanks.

  • Activity report failed(Communication error)- while check-in Activity

    Hello SDN,
    I am getting following error while Checking in activity from open activities .currently we are using NWDS7.3
    CHECKIN      Finished24s.9Files scuceeded.
    ACTIVATE     Activation Performed.Build request ID : 166
              Internal Problem(Activity report failed(Communication error
    [cause: Unalble to open connection to host<host>:<port>][reason:Address already in use : connect]]))
    Check-in completed successfully but Activation is not completed and giving connectivity error described above. Again
    I activated activity from Activation view. Still I am getting following error description.Plesae provide me solution
    to resolve this issue.
    GET_STATUS      could not retrieve activation status of request '166' (Unable to connect to
    host:port-Address already in use:connect(Service call exception; nested exception java.io.
    IOException: Unable to connect to host:port-Address already in use:connect))
    regards,
    Sree.

    Just check the full hostname of your DTR server, should be like
    hostname.company.com
    and check if somewhere only
    hostname
    is being used.and both are getting successfully pinged. DO not try the NWDS ping. Use command prompt and
    ping hostname
    and
    ping hostname.company.com
    Also this happens due to some clash with some other developer. Please check after some time, may be after a desktop restart. things should start working.
    Edited by: Varun Biswas on Nov 29, 2011 11:53 PM
    Edited by: Varun Biswas on Nov 29, 2011 11:53 PM

  • SCOM 2012 R2 Data Warehouse failed to request a list of management packs from SQL RS server

    Hello, I get this alert can someone help me out ?
    I did check the Proxy and is configured on all the MS and DW server.
    Alert Description
    Data Warehouse failed to request a list of management packs which contain
    reports deployed to SQL Reporting Services Server. Report deployment process
    failed to request management pack list from SQL RS Server. The operation will be
    retried.
    Exception 'WebException': The request failed with HTTP status 407:
    Proxy Authentication Required ( Forefront TMG requires authorization to fulfill
    the request. Access to the Web Proxy filter is denied. ).
    One or more
    workflows were affected by this.
    Workflow name:
    Microsoft.SystemCenter.DataWarehouse.Deployment.Report
    Instance name:
    Data Warehouse Synchronization Service
    Instance ID:
    {FDC7C774-397C-3660-9D57-EFBED3B60329}

    Every call to the SRS generates a call to the OpsMgr SDK on Root Management
    Server to check permissions (security integration). It apepars the account
    the call is made under does not have access.
    To figure out which account is used follow this process:
    1) Run console and click on "Run As Profiles" in the Administration space;
    2) Double-click "Data Warehouse Report Deployment Account";
    3) Click on "Run As Accounts" tab;
    4) If you have a line in the accounts which lists your Root Management
    Server in the "Target Computer" column, note the account name in the "Run As
    Account" column. If you do not have such a line, follow steps 2-4 for the
    "Default Action Account" profile and note the account name;
    5) Click on "Run-As Accounts" in the Administration space and double click
    the account name which you got on step 4)
    6) Switch to the "Account" tab and note domain name and user name;
    Once you found the account (say, DOMAIN\user) check that it is a member of
    the User Role "Operations manager Report Security Administrators". If not -
    add it and the process will recover automatically.
    Also You can refer below links
    http://blogs.technet.com/b/smsandmom/archive/2007/09/06/system-center-operations-manager-doesn-t-show-any-reports.aspx
    http://www.networksteve.com/enterprise/topic.php/Data_Warehouse_failed_to_request_a_list_of_management_packs..._E/?TopicId=16627&Posts=2
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • Intermittent "Load Report Failed" error on IIS6 ASP 4.0

    I can run reports designed in Crystal 2011 and embedded in VS2010 designed web pages on a Windows 2003 SP2 server every day.  However, once every 2 - 3 days I get a "Load Report Failed - A document processed by the JRC engine cannot be opened in the C++ stack".  The first instance of this error causes all subsequent user access to Crystal Reports to fail with the same error.  When the ASP 4.0 application pool is recycled the error goes away.
    I was getting the "Load Report Failed" error due to "out of memory" I until made sure that the crystalreportviewer.dispose was run on exiting each report page. 
    Here is  how I run Crystal Reports:
       Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
            If Not IsPostBack Then
                Dim myAL As New Hashtable
                myAL.Add("MO1", Request.QueryString("MONum1"))
                myAL.Add("MO2", Request.QueryString("MONum1"))
                Dim filename As String = ""
                filename = Server.MapPath("~/reports") + "\MfgPicklistByMO.rpt"
                Dim u As New CrystalUtilities
                Session("crViewer") = u.SetupReport(filename, myAL)
            End If
            CrystalReportViewer1.ReportSource = Session("crViewer")
        End Sub
       Public Function SetupReport(ByVal fileName As String, _
                     ByVal Params As Hashtable, Optional ByVal dbParam As Boolean = True) As   CrystalDecisions.CrystalReports.Engine.ReportDocument
            Dim objCrystalReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument
            objCrystalReportDocument.Load(fileName)
    .... logs onto a selected database, and loads paramters

    I have installed CrystalReportViewer1.Dispose() statements on all of the link events to navigate out of the pages with the CrystalViewer.  However, it turns out that several users are using the back arrow to navigate out of the page instead of the navigation links I have put on the page.
    I can't seem to find any event in ASPNET 4 that fires when the back arrow is pushed.  If I could find such an event I could put a CrystalReportViewer1.dispose statement there assuming CrystalReportViewer1 still has scope.    The Page_Disposed event does not fire when the back arrow is pushed.
    Environment:  VS2010, Crystall 2011, ASPNET 4.0

  • "Load report failed" error with VS 2010 upgrade

    I have a report system that has been running nicely for a few years. Today, I upgraded it to use the latest Crystal from Visual Studio 2010. I installed the .net framework 4.0, installed the Crystal runtime (64 bit), and updated the web site with slightly revised code to use the new stuff. Now, reports that worked yesterday fail with the 'load report failed' error. A little research shows that the file name passed to the report engine is correct (and is the same as it has always been). I see that rpt files are being created in windows\temp each time a report is requested, so it seems that the report file is being found.
    The code change I made was to use the new ExportToHttpResponse method.
    When deployed in development and test environments (both 32 bit). this worked perfectly. In production, however, no such luck. I wonder if I have missed a setting somewhere, or if there is something extra to do on a 64 bit server?
    Does anyone have a clue for me?
    More info - I found the following error in the event log:
    The keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be loaded.
    ... which I thought was interesting until I noticed the same error occurs on my dev machine, where the reports are working.
    I also used process monitor to check the dlls loaded on the production box, and they all seem to be the latest version. I tried using the 'modules' utility on my production box, but it did not pick up the Crystal stuff (or any of my web stuff - I wonder if it is a 32-bit only tool?).
    Edited by: Ray Novak on Dec 29, 2010 5:12 PM

    I just tried this again with the same result. I uninstalled the previous Crystal, deleted all the old folders and reg keys I could find, then installed the new 64 bit redist package. I asigned permissions to the SAP reg key tree. I ended up with the same result: "Invalid file name". There were new files created in the temp folder for each report request, so I can tell that my.rpt files are being found.
    I used process monitor to see what was happening, and here are the results that seem interesting:
    RegOpenKey     HKU\.DEFAULT\Software\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0     NAME NOT FOUND          
    RegOpenKey     HKU\.DEFAULT\Software\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0     NAME NOT FOUND          
    IRP_MJ_CREATE     C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64\secSSO.dll.2.Config     NAME NOT FOUND
    FASTIO_NETWORK_QUERY_OPEN     C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64\SmAgentAPI.dll     NAME NOT FOUND
    Since it seemed to be trying to create files in the \win64_x64 folder, I allowed the process full access, but it didn't help. It was also looking for SmAgentAPI.dll which does not seem to exist on my system.

  • 6500 IOS HSRP Gateway not responding to ARP requests

    WS-C6509, running Native IOS version 12.2(33)SXH4. Pair of 6500 configured with HSRP serving as Gateway to down stream clients
    Ping requests from clients not having a Default Gateway (AIX Server Team recommendation) failing.
    Packet capture show ARP requests being received by Gateway 6500, but Gateway will not respond for up to 30 seconds at which point ping requests will start working. But after a period of inactivity, the cycle starts over again - 30 second delay before traffic starts flowing.
    Having a Default Gateway is a separate discussion. I'm just interested in being able to provide technical reason why this is occuring.
    Anyone experience this?
    Any suggestions for addtional troubleshooting measures?
    Thanks in advance.

    Looks to me like a timer problem - maybe a ARP timer on the clients? Check the ARP tables of your clients during your tests.
    HTH

  • Load report failed only occurs when NETWORK SERVICE don't have access to C:

    Hi,
    My configuration:
    Windows Server 2003+SPs
    CRRedist2008_x86
    The reports works perfect, but after I run the commands bellow, the error: "Load report failed" occurs. To fix I need to give the NETWORK SERVICE read access to C:\ , It's possible to change this access to other diretory?
    Tks.
    cacls "%systemroot%" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%" /t /e /g administrators:f "CREATOR OWNER":f everyone:r SYSTEM:f
    cacls "c:\autoexec.bat" /E /C /R "EVERYONE" "USERS" "POWER USERS"
    cacls "c:\config.sys" /E /C /R "EVERYONE" "USERS" "POWER USERS"
    cacls "c:\boot.ini" /E /C /R "EVERYONE" "USERS" "POWER USERS"
    cacls "c:\ntldr" /E /C /R "EVERYONE" "USERS" "POWER USERS"
    cacls "c:\ntdetect.com" /E /C /R "EVERYONE" "USERS" "POWER USERS"
    cacls "c:\autoexec.bat" /T /E /C /G administrators:f
    cacls "c:\boot.ini" /T /E /C /G administrators:f
    cacls "c:\ntldr" /T /E /C /G administrators:f
    cacls "c:\Ntdetect.com" /T /E /C /G administrators:f
    copy W2k3.inf %Systemroot%\security\templates
    copy hardn2003.sdb %Systemroot%\security\database
    secedit /validate %Systemroot%\security\templates\W2k3.inf
    %systemroot%\system32\secedit.exe /configure /DB %systemroot%\security\database\hardn2003.sdb /CFG %Systemroot%\security\templates\W2k3.inf /log %systemroot%\security\logs\hardening.log
    gpupdate /target:computer /force
    gpupdate /target:user /force
    cacls "c:\config.sys" /T /E /C /G administrators:f
    cacls "c:\autoexec.bat" /T /E /C /G system:f
    cacls "c:\boot.ini" /T /E /C /G system:f
    cacls "c:\ntldr" /T /E /C /G system:f
    cacls "c:\Ntdetect.com" /T /E /C /G system:f
    cacls "c:\config.sys" /T /E /C /G system:f
    cacls "%systemroot%\system32\cmd.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\cmd.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\arp.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\arp.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\cacls.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\cacls.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\debug.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\debug.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\edit.com" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\edit.com" /t /e /g administrators:f
    cacls "%systemroot%\system32\edlin.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\edlin.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\finger.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\finger.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\ftp.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\ftp.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\tftp.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\tftp.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\net.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\net.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\nslookup.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\nslookup.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\regedit.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\regedit.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\regedt32.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\regedt32.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\rexec.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\rexec.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\rsh.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\rsh.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\telnet.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\telnet.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\nbtstat.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\nbtstat.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\netstat.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\netstat.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\net.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\net.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\ping.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\ping.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\regedt32.exe" /t /e /R "everyone"
    cacls "%systemroot%\system32\regedt32.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\route.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\route.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\syskey.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\syskey.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\tracert.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\tracert.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\at.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\at.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\pathping.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\pathping.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\runonce.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\runonce.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\runas.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\runas.exe" /t /e /g administrators:f
    cacls "%systemroot%\system32\secedit.exe" /t /e /R "everyone" "CREATOR OWNER" "Power Users" "System" "users"
    cacls "%systemroot%\system32\secedit.exe" /t /e /g administrators:f
    sc config alerter start= disabled
    sc config AppMgmt start= disabled
    sc config BITS start= disabled
    sc config Clipsrv start= disabled
    sc config Browser start= disabled
    sc config cisvc start=  disabled
    sc config SharedAccess start=  disabled
    sc config mnmsrvc start=  disabled
    sc config fax start= disabled
    sc config RemoteRegistry start=  disabled
    sc config RemoteAccess start=  disabled
    sc config UPS start=  disabled
    sc config UtilMan start=  disabled
    sc config tlntSvr start=  disabled
    sc config RSVP start=  disabled
    sc config RasAuto start=  disabled
    sc config TapiSrv start=  disabled
    sc config WZCSVC start=  disabled
    sc config Wmi start= disabled
    sc config Messenger start= disabled
    sc config PolicyAgent start= disabled
    sc config Schedule start= disabled
    sc config seclogon start= disabled
    sc config ImapiService start= disabled
    sc config Dfs start= disabled
    sc config PolicyAgent start= disabled
    sc config Nla start= disabled

    I don't believe that this is configurable, and i believe in other versions that you only needed to give list directory access to make it work.

  • Load report failed Access is denied ErrorCode -2147467259

    We've developed an ASP application with several reports that access SQL Server data.
    I getting this error:
    Load report failed Access is denied ErrorCode -2147467259
    only on my development machine. 
    I've checked every permission on every folder I can think of and I'm out of ideas. 
    BTW, the reports are working just fine on the Webserver.  This problem is only occuring on my local machine.
    Sandra

    This is the line where I get the exception error
    (Request.PhysicalApplicationPath & "MultiGeneral.rpt")
       'General Report
                crReportDocument = New ReportDocument
                Dim i As Integer    'TEMP
                i = crReportDocument.FileName.Length    'TEMP  
                crReportDocument.Load(Request.PhysicalApplicationPath & "MultiGeneral.rpt")
    (Request.PhysicalApplicationPath & "Robots.txt")
    crReportDocument.SetDatabaseLogon("intake", "password")
                If IsDBNull(Session.Item("ClientNumber")) Then
                    crReportDocument.SetParameterValue("ClientNum", "")
                Else
                    crReportDocument.SetParameterValue("ClientNum", Session.Item("ClientNumber"))
                End If
                If IsDBNull(Session.Item("CaseNumber")) Then
                    crReportDocument.SetParameterValue("CaseNum", "")
                Else
                    crReportDocument.SetParameterValue("CaseNum", Session.Item("CaseNumber"))
                End If
                crReportDocument.SetParameterValue("Followup", "0")
                crReportDocument.SetParameterValue("OrgName", "Albuquerque Metro Central Intake")
                'mfs crReportDocument.SetParameterValue("PrintCompScores", True)
                crDiskFileDestinationOptions = New DiskFileDestinationOptions
                Fname = "c:\exports\" & Session.SessionID.ToString & "_ASI1General.pdf"
                crExportOptions = crReportDocument.ExportOptions
                With crExportOptions
                    .DestinationOptions = crDiskFileDestinationOptions
                    .ExportDestinationType = ExportDestinationType.DiskFile
                    .ExportFormatType = ExportFormatType.PortableDocFormat
                End With
                crDiskFileDestinationOptions.DiskFileName = Fname
                crReportDocument.Export()
                crReportDocument.Dispose()

  • Load report failed error at setdatabaselogon

    I have a machine that is getting the error 'load report failed' which is happening at the setdatabaselogon command in the VB.NET module i'm using.  Sometimes it does it sometimes it doesn't!! 
    Anyone know of any reason why this would happen?

    I just tried this again with the same result. I uninstalled the previous Crystal, deleted all the old folders and reg keys I could find, then installed the new 64 bit redist package. I asigned permissions to the SAP reg key tree. I ended up with the same result: "Invalid file name". There were new files created in the temp folder for each report request, so I can tell that my.rpt files are being found.
    I used process monitor to see what was happening, and here are the results that seem interesting:
    RegOpenKey     HKU\.DEFAULT\Software\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0     NAME NOT FOUND          
    RegOpenKey     HKU\.DEFAULT\Software\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0     NAME NOT FOUND          
    IRP_MJ_CREATE     C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64\secSSO.dll.2.Config     NAME NOT FOUND
    FASTIO_NETWORK_QUERY_OPEN     C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64\SmAgentAPI.dll     NAME NOT FOUND
    Since it seemed to be trying to create files in the \win64_x64 folder, I allowed the process full access, but it didn't help. It was also looking for SmAgentAPI.dll which does not seem to exist on my system.

  • Load Report Failed Error

    LOAD REPORT ERROR
    We are working on the Crystal Reports version 2008 sp3 (12.0) with windows application. When the user tries to open more than 75 reports, this error is occurring. Please give us suggestion to resolve this issue.
    We have tried following Code changes.
    1.In Registry Settings Job Limit i changed to  -1
    2.Released all the report document objects once report generated.
    ReportDocument.Close();
    ReportDocument.Dispose();
    3.GC.Collect();
    GC.Collect();
    GC.WaitForPendingFinalizers();
    GC.Collect();
    Eventhough still i am getting error like "Load Report Failed"
    "The maximum report processing jobs limit configured by your system administrator has been reached."
    Once Report document objects are reached 75.how to decrese it?(without closing application)
    How can we resolve this issue.Any other suggestion are there for decreasing report document objects in crystal Engine.
    Please suggest me.
    Thanks in Advance.

    There are two distinct concepts to consider:
    1) Concurrent Processor License (CPL)
    The CR engine is limited to 3CPL meaning that 3 concurrent reports can be processed by the report engine. Subsequent requests are queued up and processed as a license becomes available (in the event viewer you may see messages along the lines of;  job x submitted, waiting y seconds for available license).  The .close and .dispose methods free up memory taken up processing a report. Not doing so, increases memory used until there is no more memory to be had, leading to issue such as loading of reports, unstable computers and crashes.
    2) Print Job
    A Print Job is defined as almost any job a report is requested to do. E.g.; paging is a Print Job, Zooming, subreport, etc. One report could have 75+ print jobs associated with it simply by putting a subreport into a detail section which contains 75+ records and the subreport runs per each record. I suspect this is where your issue lies. There is a way to increase the number of print jobs, however the engine is optimized for this number and increasing it may lead to unanticipated consequences. See the article [Crystal Reports Maximum Report Processing Jobs Limit|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/f053713e-3e3d-2c10-2a81-f79259e54023]. One note on the above article. I mention that setting the value to 0 essentially removes the limit. While that is true in certain cases, doing so is playing with fire....
    One other article to take note of is [Troubleshooting the error; Load Report Failed|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d02f7cd3-f18b-2d10-55ad-dab2200f68fc]
    - Ludek

  • Error in report generation-Load report failed

    I have installed crystal reports  for VS2005 runtime in my live environment.When i try to load the report file from a .Net page i am getting the error'Error in Report generation-Load report failed'.
    This works fine in development and testing but when moved to production we are having issues.
    I believe i have a workaround i.e i need to open the rpt in a VS 2005 environment and re-write the connection string again.This fix had worked in development and testing when we had the same issue.
    But not sure if this is a known issue with crystal reports and if so do we have any hot fixes for the same.
    Please help.

    Hi Don,
    The reason why i posted the item on 'data Connectivity issues' is because i suspect the problem is with the connection string.Though i had provided the correct connection string,re-writing the connection string with the same info might help to fix the issue with loading the report.
    Does it mean that there is a problem in the connectivity?
    I have a risk here that i cant re-write the connection string..i.e to open the RPT file in VS2005 and bind it.The production web server & database server sits in a  third party environment and it is not in the company network.So i cant connect to this server to re-write from any other severs in the network.
    Is there any fix which can applied to the server to get this issue resolved?
    Cheers
    Nithya.

Maybe you are looking for