CSM route mode and bridge mode can exist at the same time?

I'm using CSM on ver 4.x,and I used to the bridge mode for firewall load balance,for a new requset,I have to create a new server/client vlan,but the original firewall load balance was effected when I issued the server vlan command,and I'd like to use route mode for the new server farm,I'm wondering that route mode and brige mode can't exist at the same time,because it seems it doesn't make sense.Any reply will be very appreciated.

you can use bridge mode and route mode at the same time.
Traffic with desintation mac address being the CSM will be routed, otherwise it will be bridged.
Gilles.

Similar Messages

  • I disconnected my Ipod classic from a receiver in "user" mode and now I can't get the Ipod to work via USB in my car or receiver. HELP!!

    I disconnected my Ipod classic from a receiver in "user" mode and now I can't get the Ipod to work via USB in my car or receiver. HELP!!

    See the following for how much you will have to pay for the exchange.
    Apple - Support - iPod - Repair pricing

  • Can EJB and BC exist at the same time in one project?

    having to use ADF's BC and EJB to access data in both way due to the special requirements, but I am always getting the deployment failure.
    can Ejbs and BC components exist at the same time in one project?

    thanks for your reply.
    I considered to separate the BC and EJB as the separate project. I just use the EJB component to implement the dynamic tree menu, whether a little make a mountain out of a molehill if you as a separate project.

  • Can an Airport extend a wireless network and support a USB printer at the same time?

    Can an Airport extend a wireless network and support a USB printer at the same time?

    Yes, if the AirPort Express is extending the wireless signal produced by another Apple router. The Express cannot wirelessly extend a network produced by a non-Apple router.
    In addition to extending the network and connecting a printer, AirPlay can also be enabled on the AirPort Express, with all services operating simultaneously.
    Please note that only the print function will work if you connect an All-in-One type device to the USB port on the Express. Advanced features like copy, scan, mainentance, etc are not supported when an All-in-One device is connected to the USB port on an AirPort router.

  • I was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ?

    i was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ? i dont need the pictures or the back ups , i want to delete them but they are not there

    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

    Using a mac book pro !
    Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

    Good question bigboggerchoot.  I also would like to know the answer to this.

  • Phone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

    Both my iphone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

    This post has already been answered. Why are you plugging your own site with an answer that has already been given? Not to mention that the information you are handing out is incorrect. There is no bug, there is no patch, and no one needs to delete any email addresses. If you take the time to read the posts with the correct answers, you will see that the solution is totally different than the erroneous one you have posted.
    GB

  • I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

    I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

    Hi,
    Normally yes, Bluetooth can connect to multiple devices at the same time, so yes.
    The only thing is that you'll be able to send sound/music to only one at a time, but I understand the Garmin HUD doesn't play sounds.
    cheers

  • How to limit the max dialog no that one user can use at the same time?

    Hi,
    I meet one performance problem that one user can open 6 sessions in the GUI and he/she can run 6 reports at the same time witch could occupy 6 dialogs in the sap R/3 instance. It makes poor performance for other users.
    Would you pls tell me how to limit the no. of sessions one user can create at the same time or how to limit the no. of dialogs one user can occupy at the same time?
    Thanks a lot!
    I used this parameters in the default profile as blew:
    rdisp/rfc_check 1
    rdisp/rfc_use_quotas 1
    rdisp/rfc_max_own_used_wp 20 (means: 20%)
    It still didn't work.
    Sean

    Hello,
    We can reserve DIA W.P by giving value to the parameter :- rdisp/rfc_min_wait_dia_wp=1(default)
    that have to necessarily remain free for other users.
    This parameter is used to reserve a number of dialog work processes for Dailog mode.
    For eg. If 10 dialog w.p. are configured for the instance(rdsip/wp_no_dia=10) and the parameter rdisp/rfc_min_wait_dia_wp=3 is set,parallel RFC's can occupy a maximum of 7 DIA W.P.3 DAI W.P. always remain free for dialog mode.
    But now the question is how we assign/restrict this free dialog w.p. to the specific user.
    Reply...
    Regards,
    JUNAID

  • How to play stereo mix music and sing in my mic at the same time?

    Hi guys, need help regarding Realtek HD audio driver
    I want to play stereo mix music and sing in my mic at the same time.... not for recording purposes but in chatroom let's say.
    I'm using XP...Toshiba Satellite S4747 laptop
    In the Realtek software under " Realtek HD audio input" I have mic and stereo mix both.... but I can only select one at a time.....
    Any solutions plzzz thxxxx
    On a different note.... a friend of mine whose using one non-Toshiba laptop with win XP has an older version of the Realtek audio driver and can select both mic and stereo mix at the same time... I downloaded that version into my laptop but I still can only select one at a time....

    Check the audio settings in Windows and dont forget in Realtek HD audio manager. You can find it in control panel.
    I think your microphone is set to mute so check this.

  • SCXI 1112 and 1302 doesn't run at the same time

    Hi,
    I have SCXI 1112 thermocouple input module,  SCXI 1180 feedthrough panel , and a SCXI 1302 terminal block connected SCXI 1000 chassis with SCXI 1349 adapter. I am trying to measure voltage by using SCXI 1180&1302, and temperature by 1112 module at the same time. When  chassis is on SCXI 1112 runs without a problem; however, voltage reading coming through SCXI 1349 makes no sense (plus I can't run them at the same time, LAbview gives an error). While the chassis' power is off, it is the other way around, SCXI 1349 runs smoothly.
    In addition to that, a radiometer, connected to a power supply, is wired to SCXI 1302 terminal block. When power supply is on, SCXI 1112 module's temperature reading is 4 times higher than actual value. In other words, power supply effects the readings.
    Could you please give me some advice to solve this problem?
    Thanks,
    Azra

    One piece of the puzzle you left out is the DAQ card being used in the host computer. 
    Without looking at some specifics on the SCXI cards/connectors you are using, I will comment you must be careful when you are using an 1180 feedthrough module.  Keep in mind, the SCXI chassis is Signal Conditioning -- it's nothing without the DAQ. 
    I would recommend you back up a few steps, simplify the setup and test each input channel from MAX -- making sure you aren't overlapping channels between the 1180 to the DAQ and the SCXI chassis.  Remember, most data from the SCXI chassis comes in on a single channel of the DAQ through the 1349.
    Hope this might help. 
    RS

  • New IPhone and Ipad air are ringing at the same time...

    New IPhone and Ipad air are ringing at the same time, from incoming landline/mobile phones. Help please...

    That's a new feature introduced in iOS 8 called Handoff. You can start something on your iPhone and finish it on your iPad or Mac. You can make the iPad stop ringing by going to Settings>FaceTime on the iPhone and toggling off iPhone Mobile Calls. You can do it on the iPad also.

  • I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

    I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

    Recurring theme with the 4s losing alerts except for the phone ringing.  Most complaints seem to center on the 7.1 upgrade.  The fix is dodgy, putting in a charger, playing a you tube video then pulling out the charger and wiggling it until you get the sound back.  When you get the sound back, the volume buttons start to work again.  Alternate solutions involve cleaning the docking port with a toothbrush, running a pick over the electrodes etc.

  • It is possible to charge an iPad3 over USB and transmit data over USB at the same time?

    Hello,
    it is possible to charge an iPad3 over USB and transmit data over USB at the same time?
    If yes, how?
    Thanks
    Best regards

    OK!?
    That is right that the USB data oins are not connected to +5V pin.
    But i found a description for a self built power supply for iPad.
    http://timothyb.net/DIY_iPad_2_USB_Charger.html
    and
    https://www.mikrocontroller.net/topic/262610?goto=2726627#2726627
    The description say: data pin D- need a voltage level of 2V and D+ 2,857V
    when the data pins have this special voltage levels and VCC has +5V only then the iPad is charging.
    The voltage "D+/D- coding" is the key for the iPad to charge.
    OK now back to my problem.
    The regular USB data pin voltage level is 0,3 - 3.,0 voltage. When the iPad is charging the data pins have this special voltage level. Now i try to transmit data over the usb data pins with the. Normaly the USB port transmit the data with a voltage level of max. 3V.
    And here my problem. The higher voltage level at the data pins cares therefor that the iPad stop the charging.
    Is that correct?

  • When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

    When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

    I just found the solution!
    Niel
    Re: Why is my Finder window popping up when I open my Safari window? 
    Jan 20, 2008 7:58 PM (in response to alak)
    Open the General tab of the Safari preferences and correct the home page; the default page is this one. If it has become set to a folder on an FTP server or a local drive, that request will be sent to the Finder. (28252) 
    iMac Late 2007 Core 2 Duo, Mac OS X (10.5.1)

Maybe you are looking for