CSM - STICKY FOR SAP PORTAL USING SAPLB_* COOKIE

Hello,
Please, someone could send me an sample config implementing session persistence in SAP using saplb_* cookie in CSM with software 4.2 ?
Thank You,

we need more details.
What's the cookie name ?
Is it saplb_ ? is it changing (so the asterisk saplb_*) ?
The CSM can only learn the value of a cookie for a specific name which is static.
This is done easily.
IE:
gdufour-cat6k-2(config-module-csm)#sticky 100 cookie saplb
Once you have created your sticky group, you can assign to your vserver
gdufour-cat6k-2(config-module-csm)#vserver www
gdufour-cat6k-2(config-slb-vserver)#sticky 60 group 100
Gilles.

Similar Messages

CSM SLB for SAP portal 5.0

Dear All!
Is there somebody who have experineces with SLB for SAP portal? The main question is : Which sticknies to use: SSL or IP based? How to configure IP based, because I did not find good explanation of "netmask" parameter in sticky,sticky-group command. What happen to sticky connection, when real server fail. Is it rebalanced?
Thanx!
Gabriel

Hi Gabriel,
I do not have experiences with SAP-Portal Loadbalancing but from my experience with loadbalancing I would say that this decision should be done regarding the surrounding environment. If there are proxies around which are used to connected to the loadbalanced VIP I would suggest SSL-Session balancing/stickieness. If clients are directly connecting towards the VIP a client-IP-stickieness might be easiser to troubleshoot.
Regarding the netmask issue:
Unfortunately there is no real documentation (I did not find any so far). I can only tell you the result out of my experience:
A netmask 255.255.255.255 is kind of host stickiness and 255.255.255.0 a stickieness of a /24 network. In other words I think that all Clients with a network of 10.1.1.0/24 are sticked to the decission once taken for one of the hosts in this segment while the sticky timeout did not take place. Maybe one can confirm or correct this.
Regarding the thing with the failure of a real server:
With the corresponding failaction defined in the serverfarm you decide what to do in case of an error of a real server. The stickiness should be corrected correspondig to the results you define with the failaction command.
This is how I dealt with those sticky issue when doing firewall loadbalancing with client-IP-Stickiness.
Hope that helped.
Kind Regards,
Joerg

Use only Internet Explorer for SAP portal

Hello,
We have a requirement to use only internet explorer for SAP portal.
When we try to use portal in any other browser, it should display a message saying "This browser is not supported for the application" (or any other message). But purpose is, the portal application should be usable in only one browser i.e Internet Explorer.
If any one have any idea on this, how this can be implemented, then please share the same. I tried to find if there are any standard SAP portal parameters, but haven't come across any.
Regards,
Denish

Hi Denish:
Following link may not apply to your scenario but could give you some direction and ideas:
Changing the Default Browser Detection - Developing Web Dynpro ABAP Applications - SAP Library
Further more, specifics of your system set up may help us in understanding your situation better and perhaps we can offer more help.
Sincerely,
Amrit

Business packages for SAP Portal 7.3

Hi,
as far as I know at the moment there are no business packages existing for SAP Portal 7.3. Is this correct? If yes, how are the different business packages scheduled?
Bye,
Timo

Hi Timo,
with EHP5 you may choose between WD JAVA and WD ABAP.
Just check
http://help.sap.com/erp2005_ehp_06/helpdata/en/48/a2d0be5444690ae1000000
0a42189c/frameset.htm
As soon as you have decided to use one of the versions you may use the Maintenance optimizer to determine the pacakge.
The release of the portal is not so important for the business packages. The NW release is just important if you run the JAVA applications on this machine as well. For NW 7.3 this means
you will need the 633 and 630 packages.
Regards
Shrikant

BAdI definition BADI_SD_SALES_ITEM is only provided for SAP internal use

I tried to create an implementation for the BADI BADI_SD_SALES_ITEM . It gave the following error message .
<u><b>BAdI definition BADI_SD_SALES_ITEM is only provided for SAP internal use</b></u>
What does this message mean?
I want to use the method ITEM_CHECK in this BADI .is there a way to write a code in this method by creating an implementation for this BADI.

Hi
It means that BADI can be used only by SAP, i.e. it can be used only on the original SAP system, so not in a customer system as yours.
See the table SXS_ATTR, here you can find the attributes of the BADI, in particular you can see the flag FOR ONLY INTERNAL USE.
If this flag is active and the system isn't a SAP system, that error'll occur.
Max

BADI_SD_SALES_ITEM is only provided for SAP Internal Use

Hi,
I am trying to implement this BADI_SD_SALES_ITEM but appears with the text 'BADI definition BADI_SD_SALES_ITEM is only provided for SAP internal use' . Can you tell me what should i change credit limit o Can you tell me how use this BADI_SD_SALES_ITEM ?
Diana

Hi Diana,
On 4.7 at least, it is not released for external use by customers.. There is a SAP note out there that says the same thing -- and tells you to use the standard exits (eg. MV45AFZZ)
Guess SAP created it in case they need to enhance the standard, and they don't want us to touch it yet.

'The Business Add-In is reserved for SAP internal use' message

Hi all
The Business Add-In is reserved for SAP internal use...
I got this message when I tried to create a new implementation to BADI EQUI_SCR_01. I'm trying to add new tab to Iq01/02/...
Does this message mean that this BADI is not modifiable? 'Coz this is the only BADI appropriate for my requirements.
please help me on this
Regards
Rajan

HI Rajan,
You cannot use this badi as it is used by SAP for internal use...Check for other badis which is not internal use.
Regards,
Nagaraj

I created webdynpro view then i want to export to sap portals using SLD CON

hi
every body
i created WebDynpro views in NetWeaver dev studio
then i want to export to sap portals i have to use
SLED CONFIGURATION what are all step required can
post to me and aloes step to configure in visual administrator and JCo connections
bee

hi
check out this weblog for SLD configuration
/people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak
or
Do the following
SLD (System Landscape Directory) CONFIGURATION on J2EE Server.
http://host:j2ee_port/sld
Enter Administrator user name and password.
Go to Administration -> Server Settings
Make sure that the SLD server is stopped
Enter the following Server Parameters
Object Server:
<Host name of the J2EE server>
Working Directory:
The working directory of the System Landscape Directory.
The standard path is "/usr/sap/<SAPSID>/SYS/global/sld"
Click on SET.
Select the following parameter for Persistence
Persistence: Database
Click on SET.
Leave ABAP Connection Parameters Blank.
Go back to Administration.
Click on Data Supplier Bridge
Configure the data supplier bridge with following parameters.
Update local SLD (sld/active): TRUE
RFC Gateway:
Server : <host name of J2EE server>
Service : <The SAP gateway service port>
Click on SET.
Open Administration Tool for J2EE server from following Location.
C:\usr\sap\<SID>\JC<instance number>\j2ee\admin\go.bat
Select Default and Click on Connect.
Enter password for Administrator.
Click on Connect.
Select Cluster->Server->Services->SLD Data Supplier
Select http setting tab page and enter following details.
Host: <host name of J2EE server>
Port: <Port Number of J2Ee Server>
User: <Administrator User>
Password: <Password for Administrator User>
Use https? : <Check this if you want to use https>
Trust Store: <leave default i.e. TrustedCAs>
Click on SAVE.
Select RFC Settings tab page and enter following details.
Gateway Host : <host name of J2EE server>
Gateway Service/Port: sapgw<instance number>
Click on SAVE.
Restart the SLD data Supplier Service.
After the SLD is configured.
go to the path.
http://<hostname>:50000/webdynpro/welcome.
go to your application.
click on the application. on the right hand side you can see you logical systems.
create the JCO connection going through that steps.
Deploy you application on to portal from NWDS and run your application.
Regards,
Gopi

Blogging application for SAP Portal?

I would like to ask what kind of Blogging application is the SDN using on it's pages?
We would like to add a blogging application for the Portal and have read that at the moment, there is no SAP built-in application for blogging.
What would be the best solution to integrate Enterprise blogging in the SAP Portal?

Hi,
Did you get to look at this [thread|https://www.sdn.sap.com/irj/scn/thread?messageID=6415605#6415605]
Hope this helps!
Cheers,
Sandeep Tudumu

Which NWDS Studio Version for SAP Portal SP 7

Hi experts,
which NWDS Studio Version I have to use for SAP Enterprise Portal SP 7 and where can I see the Version number from NWDS?
Under help -> about -> feature details I read:
Eclipse 2.1.2
SAP AG 2.5.12
Thanks in advance!

Like this u can see in help menu...
Then u can find the version...
SAP NetWeaver Developer Studio
Version: 7.0.09
Build id: 200608262203
(c) Copyright SAP AG 2006. All rights reserved.
Visit http://www.sap.com
This product includes software developed by the
Apache Software Foundation http://www.apache.org/
Eclipse.org http://www.eclipse.org/
URs GS

How to move files from one folder to another folder in webdynpro java for sap portal

Dear Experts,
I wan to move files from one folder to another folder in SAP portal 7.3 programmatically in webdynpro java.
My requirement is in my portal 1000 transport packages is their. Now i want to move 1 to 200 TP's into Archive folder.
Can you please help me how to do in through portal or wd java ...
Regards
Chakri

Hello,
Do you know what the difference between copying a file this way :
** Fast & simple file copy. */
public static void copy(File source, File dest) throws IOException {
FileChannel in = null, out = null;
try {
in = new FileInputStream(source).getChannel();
out = new FileOutputStream(dest).getChannel();
long size = in.size();
MappedByteBuffer buf = in.map(FileChannel.MapMode.READ_ONLY, 0, size);
out.write(buf);
} finally {
if (in != null) in.close();
if (out != null) out.close();
================SECOND WAY============
AND THIS WAY:
// Move file (src) to File/directory dest.
public static synchronized void move(File src, File dest) throws FileNotFoundException, IOException {
copy(src, dest);
src.delete();
// Copy file (src) to File/directory dest.
public static synchronized void copy(File src, File dest) throws IOException {
InputStream in = new FileInputStream(src);
OutputStream out = new FileOutputStream(dest);
// Transfer bytes from in to out
byte[] buf = new byte[1024];
int len;
while ((len = in.read(buf)) > 0) {
out.write(buf, 0, len);
in.close();
out.close();
And which is better? I read up on what each kind of does but still a bit unclear as to when it is good to use which.
Thanks in advance,
JavaGirl

How to implement for sap system use HADR

hi expert ，
       i am a newbie to sap basis， we have a requirement that do HA for our sap using HADR，i want know if there are some good sulotion for my scenario。
   our scenaro is we have two window 2008 sever host，one host has a sap system and we want the sap db2 database as a primary，and the other host also has a same the system which is restore from the previous sap system which we implement by system copy using database restore not migration。i want know as our secanrio could i achive SAP application HA by HADR，if we donu2018t have HA software like MSCS。whether we must manual monitor the primary sap   when it stop because any issue like hardware failed and then manual start the other sap system in the other host？
our two sap system have different sap profile beacause the hostname are different.
our aim is when one of our host can't use we can immediate start the other sap system in the other host, the less the change the better the solution .
is it possible?
thanx very much,
best regards.

hi paul ,
    thanx for your information，i have already read the inforamtion about sg247363 once-over and SAMP。 but unfortunately we have a different situation，we only have two windows servers and must installed windows server 2008 OS because some reasons。we also don't have have other host to install sap。as this situation，how could we implement HA beacuse we also don't have shared disk。the window server are isolation。
i also read some pdf which download from sdn ， in the book the HA is implemneted as the sap application has a separate host and has two host for DB2 database using HADR，the HA is rely the cluster software 。in this situation the sap application also need HA to avoid single point failure。
    as the limited i have said above， is it possible to do HA by MSCS ，can any body tell me if the MSCS is free to install in OS windows 2008？ if we can't use it free，have any other solution？in the worst ， we must manual monitor the application and when a sap application or database can't work ，we want to restart the other sap which in the other host，we need the database synchronization between two database which using HADR。is it possible ？if it do， whether there are some additional setup for sap application because the two sap application have different sap profile name（a sap is a system copy from the other by database restore）。
    any reply will be appreciated。

Disaster Recovery setup for SAP Portal

Hello,
I am trying to setup a DR site for our portal system. We are using EMC Recover Point to do the SAN replication between Production and DR site. We are using MSCS cluster with one CI and DI in Production. For DR, we are planning to go with a distributed installation with one portal and database node.
Can I create the DR system using System copy assuming that the SID is going to be the same, and the host names/IP addresses are different. How can we make sure that the custom applications deployment in production is in sync with the DR site? I don't think replicating the database preserves everything as the Java system persists data in both the database and the file system, for example the Software Delivery Manager (SDM) is persisted in the file system.
So, how can I make sure that the file system is also gets replicated between production and DR site? Should I keep the DR system shutdown and bring it up for weekly sync up or it can run parallel with the production system?
Thanks.

Hi,
Regarding the system copy, last time I did one myself (its a while ago so I'm not sure if it is still a limitation) it was not possible to have the Target SID the same as the Destination SID.
If this is not a limitiation anymore then yes you can use the system copy procedure as it also takes the SDM with it.
Cheers,
Benjamin

How can generated EWA for SAP Portal system

Hi Guru there,
Usually generate EWA should maintenan RFC, We have SAP Portal systems ( prod PP1 and test PT1 and dev PD1), but they are not appeared at saplogon and no general SAP interface, only operationing system level we can start/stop SAP system and database and from the operating system browser can see the portal work normal ( 50000 port) or not.
How can I generate EWA from solman?
waiting for your kind reply!
best regards,
WEI

Hi Wei,
Do you already know SAP Note <a href="http://www.service.sap.com/sap/support/notes/976054">976054</a>?
This SAP Note describes the setup of EWA for NON-ABAP Components.
Please see the description and the attachments.
Best regards,
Ruediger

BEx Query not able to excecute on SAP Portal using Internet Explorer 9

Hello,
What config. do I need to do in the Internet Explorer 9 so that it will excecute the query on SAP portal.
Error message: Internet Explorer cannot display the webpage
Thanks
Arjun

Hi Arjun
Please check the SAP portal and BI system version and then check the compatibility for BEx Query in IE9.
Refer to http://service.sap.com/pam >> Click on SAP Netweaver version, here you can find the PDF files.
BI (BEX Web) is supported on IE9 with SAP porta version 7.0 SPS24 in vista or windows 7 if you SAP portal version is 7.0
Best Regards
Arun Jaiswal

CSM - STICKY FOR SAP PORTAL USING SAPLB_* COOKIE

Similar Messages

Maybe you are looking for