CSM: Sticky timeout parameter: difference between sticky group and vserver

Hi,
Concerning the example in the CSM manual about configuration of stickiness:
What (or why) is exactly the difference between the timeout parameter (100 minutes):
sticky 12 cookie foo timeout 100 AND the sticky 50 group 12 in the vserver.
The timeout parameter is overruled in the vserver configuration. (100 -> 50)
For what could this be usefull?
Thank you!
Kind regards,
Wim
This example shows how to configure a virtual server named barnett, associate it with the server farm
named bosco, and configure a sticky connection with a duration of 50 minutes to sticky group 12:
Router(config)# mod csm 2
Router(config-module-csm)# sticky 12 cookie foo timeout 100
Router(config-module-csm)# exit
Router(config-module-csm)#
Router(config-module-csm)# serverfarm bosco
Router(config-slb-sfarm)# real 10.1.0.105
Router(config-slb-real)# inservice
Router(config-slb-real)# exit
Router(config-slb-sfarm)#
Router(config-slb-sfarm)# vserver barnett
Router(config-slb-vserver)# virtual 10.1.0.85 tcp 80
Router(config-slb-vserver)# serverfarm bosco
Router(config-slb-vserver)# sticky 50 group 12
Router(config-slb-vserver)# inservice
Router(config-slb-vserver)# exit
Router(config-module-csm)# end

if you configure the group under a policy, there is no option for the timeout.
This is why the option exist under the stick-group.
In the vserver, you can overrid this timeout - so the timeout is per vserver.
If you want the same timeout, just configure the same value.
gdufour-cat6k-2(config-module-csm)#policy test1
gdufour-cat6k-2(config-slb-policy)#sticky-group ?
<1-255> sticky group ID
gdufour-cat6k-2(config-slb-policy)#sticky-group 12 ?
Gilles.

Similar Messages

  • What  is difference between user group and reference user group?

    hi
    guys,
            what  is difference between user group and reference user group? 
    your regards
      p.suresh

    Hi ,
    Chk the link below for your clarifiacation.
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/5c/c1c81c445f11d189f00000e81ddfac/frameset.htm
    Hope it helps.
    Regards,
    Amit
    Edited by: Amit Kotwani on Sep 2, 2008 2:15 PM

  • WHAT IS THE DIFFERENCE BETWEEN PHRASE GROUP AND PHRASE SET?

    WHAT IS DIFFERENCE BETWEEN PHRASE GROUP AND PHRASE SET?

    Hi Ramya,
    Definition of a Phrase group is a number of phrases contained in a phrase library grouped according to logical criteria. A phrase can be assigned to only one phrase group.
    Phrase set is grouping of phrases for a purpose which includes allowed phrases for a value assignment type and Default phrases for a value assignment type. A phrase can be assigned to a number of phrase sets.
    Hope this helps you
    Best Regards
    Srinivas

  • Difference between AP groups and HREAP or flexconnect

    Hi Experts ,
    Can anyone please tell me the difference between AP groups and HREAP functionality?
    Is the AP group for within one office location ? and Hreap is over WAN?
    Regards,
    Vijay.

    AP groups and H-REAP/FlexConnect are used differently.  AP Groups define what SSID's and WLAN to VLAN mapping (local mode) that ap's in the group will have.  H-REAP/FlexConnect group is only used when the ap's are in this mode and you define ap's that are close together in that group for fast roaming if using 802.1x.  If your only using pre-shared key or non-802.1x, then you really don't need to use H-REAP/FlexConnect groups.  You can have ap's in both ap groups or h-reap/flexconnect groups, that is why you need to understand what each does.
    FlexConnect Grups:
    http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010001111.html
    AP Groups:
    http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01011111.html
    Scott

  • Difference between bridge-group and VLAN

    Hi all,
    I don't understand very well the difference between bridge-group and VLAN...
    Could someone explain me or give me a site which could help me?
    Thx U by advance!

    Khay
    bridge-group is used on a router to enable bridging on an interface. In terms of functionality a bridge-group is very similar to a VLAN. For example if you create bridge-group 1 and assign it to interfaces FastEthernet 1/0 and 2/0 and you create bridge-group 2 and assign it to interfaces FastEthernt 1/1 and 2/1 it is like creating 2 VLANs. Devices in bridge-group 1 (interfaces 1/0 and 2/0) can communicate with each other but not with devices in bridge-group 2 (intefaces 1/1 and 2/1).
    HTH
    Rick

  • Differences Between Infopackage Groups and Process chains

    Hi All,
    Can anybody explain me what are the differences between Infopackage Groups and Process Chains ? And how process chains are more comfortable

    hi nagarjuna,
    An InfoPackage group is a collection of InfoPackages. In order to summarize data requests which logically belong together from a business point of view, and to therefore simplify the request, you can collect data requests (meaning the InfoPackages) into an InfoPackage Group. You can schedule each of these groups in the scheduler . With the data request the scheduler can access InfoPackage groups directly and thereby request more than one InfoPackage at a time, corresponding to the setting in the InfoPackage group. Thus, you can support InfoPackage groups with the serialization of your data requests.
    While a process chain is a sequence of processes that wait in the background for an event. Some of these processes trigger a separate event that can start other processes in turn. hit this link to know abt PCs:
    http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/content.htm
    Process chains are more comfortable becoz itz not like infopackages where we have to schedule each pack individually. And in PCs, monitoring is very convenient since u see evrything in a single page.
    regards
    sham'm

  • Difference between Admin Groups and Analytics Web Groups

    Hi All,
    Can anyone tell me what is the difference between the user Groups we can define in Siebel Analytic Administration Tools -RPD and Siebel Analytics Web Groups?
    Also what is the relationships between them? In my environment I'm getting sharp difference between these groups.
    Thanks for reading.
    Sudipta

    Hi Sudipta,
    Please find the below link,
    Security in OBIEE
    Thanks,
    Vino

  • Difference between "account group" and "reconciliation account"

    Hello,
    I am new to SAP and I would like to understand the difference between the "account group" and the "reconciliation account" that appear both in the vendor master records.
    From what I read, "account group" is just a classification but has no "accounting" impact whereas "reconciliation account" (goods suppliers, overhead expenses suppliers...) do have an accounting impact.
    However I am not sure so I would like a confirmation on that and if possible examples so I could really understand.
    Thank you.

    Hi,
    The account group is a way to divide vendors into groups for reporting later on.
    The account group is also the link to the number range and the field selection functionality.
    Please refer the below link for more clarity.
    http://help.sap.com/saphelp_46c/helpdata/en/53/c98647ca3711d2b494006094b9114a/frameset.htm
    Account group
    The reconciliation account is the account is the account which is posted to at invoice receipt stage where the vendor account represents the sub ledger and the reconcilation account the ledger.
    Reconciliation Account
    http://sapdocs.info/sap/fico/reconciliation-accounts-and-special-gl-indicator/
    Hope it helps you.
    Thanks.

  • Difference between material group and external material group

    Hi,
    Can anybody let me know the difference between the material group and external materila group from the business perspective.
    Thanks

    Hi Raghunandan,
    Material Group : Materials having similar attributes will be goruped together and assigned to a Material Group.
    Material groups are Extensively useful during :
    Limit the Scope of Analysis
    Reporting Purpose
    External material group : Key that you can use to assign the material to an external material group or to a material group determined according to external systematics.
    In General, External material groups are nothing but external representation of group of material  which are extensively used in supply souce determination for provions materials related to retail and some other functions
    In short if your Internal material group for example bearing is 0001 you can group externally further based on manufacturer like FAG for NRB. No accounting activity is based on it
    Reg,
    Ashok

  • Difference between MRP group and plant parameters

    hai friends,
    please let me know, what is the main difference between the MRP group and plant parameters?,
    what are the extra activities or features with one, when compare to the other?.
    Edited by: Mourya.v on Sep 22, 2010 6:36 AM

    Dear Mourya,
    Why to assign MRP group? - If planning for each plant is not specific enough for your purposes and you would like to assign
    control parameters that differ from the control parameters defined for the plant to certain material groups.
    1.For all materials without an MRP group, the system uses the plant parameters that is the settings present in OPPQ, or the
    entries in the initial screen of the planning run.
    2.For all materials with an MRP group, the system uses the parameters recorded in the MRP group that is the settings in OPPR.
    3.The MRP group is an organizational object that can be used to allocate special control parameters for planning to a group of
    materials. You can maintain MRP groups if planning control per plant is not precise enough for your requirements and you want
    to allocate certain material groups different control parameters from the plant parameters. For this purpose, MRP groups are
    defined with these specific control parameters and are assigned to the material in the material master record (MRP 1 screen).
    4.The MRP group, groups material from the material requirements planning point of view to allocate them control parameters for
    planning.The control parameters include the strategy group, the planning horizon and the creation indicator for the planning run.
    Also check this link [Settings in OPPQ & OPPR|oppr and oppq]
    Regards
    Mangalraj.S

  • What is the difference between function groups and Object Orientation

    Hello all
    I have read about this on the help.sap.com site, I still do not understand it completely, can some one explain me with  a simple example please ? (Not the increment counter example please !).
    Thanks a ton.
    Rgds
    Sameer

    Hello Sameer
    When you call a module of a function group for the first time in your program then the entire function group is loaded. However, this can happen only once within your report and all global variables within the function group will have the same values all the time (except they are manipulated via fm's).
    In contrast, you can create as many instances of the same class as you want and all of them can have different global attributes. And all these instances are independent of each other.
    On the other hand, if fm_A changes global attributes of the function group and fm_B reads these attributes then fm_B read the changed values.
    Or in other words:
    Function Group = can be instantiated only ONCE
    Class = can be instantiated unlimited
    Regards
      Uwe

  • Accounting the differences between the group and statutory record

    Hi guys,
    In our set up, the group reporting requires the book to be closed within 10 days from the year end. However, due to various tax reasons, the stutory books can be kept open till 25th.
    For example, there could be a credit note to be accounted between 10th and 25th which should appear in the statutory books as part of current year. But in  Group reporting it should consider as the transaction for next year.
    We have considered 2 options:
    a) Do an adjustment transaction using Gl accounts with differnet range and exclude these accounts from group reporting. next year, reverse these transaction and account using normal GL accounts.
    b) Account the adjustment transactions in a special period. In Group reporting, exclude these spacial transactions. However, the group reporting should include the special period from the previous year.
    c) Use special purpose ledger. Account the transactions in special period and consider changing the period in the mapping rule (yet to prove).
    Can anbody think about any other options?
    many thanks
    AMA

    Commitment limit is not related to order value.
    As per help file:
    A warning message appears if <the customer's account balance>+ <the total amount in undeposited checks> + <the amount of the current document> exceeds the customer's commitment limit.

  • What is difference between ESB Service and ESB Service Group

    Guys please tell me What is difference between ESB System and ESB Service Group and when we use them, i mean in what condition.
    Many Thanks
    Deepak

    The use of these is explained in the ESB developers guide along with some examples in what case to use them. See: http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28211/esb_jdev.htm#sthref167

  • What is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

    what is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

    there is a workaround you can try, create audience and add DL to them and deal with the audience or convert DL to groups
    https://social.technet.microsoft.com/Forums/en-US/02f0d773-8188-4d94-a448-0c04d838b0cf/distribution-lists-in-sharepoint?forum=sharepointgenerallegacy
    Kind Regards,
    John Naguib
    Technical Consultant/Architect
    MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
    Please remember to mark your question as answered if this solves your problem

  • Difference between Field symbols and field group

    Hi experts,
    Can you please advice me what is the difference between field symbols and field groups.
    Thanks in advance,
    Logu.

    Field symbols: are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
    Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
    Field Groups:
    A field group is a user-defined grouping of characteristics and basic key figures from the EC-EIS or EC-BP field catalog.
    Use
    The field catalog contains the fields that are used in the aspects. As the number of fields grows, the field catalog becomes very large and unclear. To simplify maintenance of the aspects, you can group fields in a field group. You can group the fields as you wish, for example, by subject area or responsibility area. A field may be included in several field groups.
    When maintaining the data structure of an aspect, you can select the field group that contains the relevant characteristics and basic key figures. This way you limit the number of fields offered.
    A field group combines several existing fields together under one name
    like
    FIELD-GROUPS: fg.
    then you can use one insert statement to insert values in fields of field-group.
    INSERT f1 f2 ... INTO fg.
    Field symbols
    If u have experience with 'C', then understand this to be similar to a pointer.
    It is used to reference another variable dynamically. So this field symbol will simply point to some other variable. and this pointer can be changed at runtime.
    FIELD-SYMBOLS <FS>.
    DATA FIELD VALUE 'X'.
    ASSIGN FIELD TO <FS>.
    WRITE <FS>.
    Field symbols: are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
    Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
    Field Groups:
    A field group is a user-defined grouping of characteristics and basic key figures from the EC-EIS or EC-BP field catalog.
    Use
    The field catalog contains the fields that are used in the aspects. As the number of fields grows, the field catalog becomes very large and unclear. To simplify maintenance of the aspects, you can group fields in a field group. You can group the fields as you wish, for example, by subject area or responsibility area. A field may be included in several field groups.
    When maintaining the data structure of an aspect, you can select the field group that contains the relevant characteristics and basic key figures. This way you limit the number of fields offered.
    example :
    DATA: BEGIN OF SPTAB OCCURS 0,
    line(1000), " or type string
    END OF SPTAB.
    DATA: IDX LIKE SY-INDEX.
    field-symbols <FS1>.
    split tb_sip AT ';' INTO table sptab.
    LOOP AT SPTAB.
    IDX = IDX + 1.
    ASSIGN COMPONENT IDX OF STRUCTURE tb_detsip TO <FS1>.
    If sy-subrc = 0.
    <FS1> = SPTAB-line.
    Endif.
    Endloop.
    append tb_detsip.
    clear idx.
    Field Groups / Extracts
    http://help.sap.com/saphelp_46c/helpdata/EN/9f/db9ede35c111d1829f0000e829fbfe/frameset.htm
    Field Symbols
    http://help.sap.com/saphelp_46c/helpdata/EN/fc/eb387a358411d1829f0000e829fbfe/frameset.htm
    Reward points if useful.

Maybe you are looking for