CSM to GSS via KAL-AP: How to display vserver transitions ?

Hi,
I need to know how much time a CSM sent an Offline status for a VIP (vserver) to the GSS via KAL-AP. In other words, I want to see how match time a specific VIP reported a load = 255 to the GSS, because all real servers in the farm were unavailable or overloaded. With the command "show module csm 1 vserver name <Name>, I don't see this counter :
PORTAL-PROD, type = SLB, state = OPERATIONAL, v_index = 30
virtual = 160.213.139.14/32:26000 bidir, TCP, service = NONE, advertise = FALSE
idle = 3600, replicate csrp = connection, vlan = ALL, pending = 30, layer 7
max parse len = 4000, persist rebalance = TRUE
ssl sticky offset = 0, length = 32
conns = 0, total conns = 87
Domains:
PORTAL-PROD
Is there another way to display this value on the CLI ?
Thank you
Yves Haemmerli

I am reposting this question, because I am investigating why the GSS shows VIP transitions via KAL-AP, while there is no real servers failures...So, I would like to see a VIP (vserver) transitions counter on the CSM, in order to coorelate what the GSS says.
Thank you for any hints,
Yves Haemmerli

Similar Messages

  • CSS Load reporting to the GSS via KAL-AP

    Question 1 :
    When load calculation is enabled on the CSS, how does the CSS aggregate individual load values of each real service for transmission to the GSS ?
    Question 2:
    If we use the use a script on a management server that would gather server load information (typically CPU utilization) and then dynamically set the load value for each service, does the CSS aggregate these load values and transmit the result to the GSS via KAL-AP as well ?
    Thank you
    Yves

    Yves,
    this is the 2nd time you post this question and unfortunately I do not think you will get an answer.
    It's a tough question because the load subject is not very well-known outside Cisco and even internally very few people now exactly how it works.
    If this is really important for you, I would suggest to contact a Sales person at Cisco and ask him to research this information for you.
    Regards,
    Gilles.

  • CSM : How to display state transitions ?

    Hi,
    Is there any way on the CSM to monitor the number of state transitions for real servers and virtual servers (like the show summary command on the CSS)? I don't find any information in the detail output of "show mod csm x real detail" or "show mod csm x vserver detail"
    Thank you,
    Yves Haemmerli

    Yves,
    there is no counter tracking this info.
    The CSM will log a message when a server goes down or up. You could save them on a syslog device and use a script to count transitions.
    A CSM command to use to detect if there was probe failures is 'sho mod csm X tech probe'. It counts total of probe [not per real] so.
    Gilles.

  • HT1386 My MacBook Pro HD crashed.  It is all up and runmning except for one issue.  I have about 200 songs on my iPhone but have only gotton 53 back on my laptop and those are the songs I purchased via iTunes. How do I get the rest of the songs from iPhon

    My MacBook Pro HD crashed.  It is all up and runmning except for one issue.  I have about 200 songs on my iPhone but have only gotton 53 back on my laptop from my iPhone and those are the songs I purchased via iTunes. How do I get the rest of the songs from my  iPhone back onto my HD. 
    The songs I'm not able to import casme from CD's.  Nothing from napster etc.
    I've tried and tried to import them rom iTunes vis "Library"  " Import"

    Hey kbert73
    I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/ht4527
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

    Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

    I misunderstood what Time Capsule is and had hoped for a wireless backup device that didn't have to be connected to the router.
    The TC is a wireless backup device.. it does not need to be connected to the main router..
    The problem is the computer.. not the TC.. the computer has only one wireless card.. if your current internet is by wireless.. then you must choose.. internet or backup.
    But my other suggestion will work.. get a wireless USB stick compatible with Mac OS.. there are plenty and cheap.. since you are in the same room as the TC they will work fine.. plug it in and load the driver.. taint hard.
    You should do the first backup by ethernet though.. wireless is too slow.. once you have that, you will do fine.
    Search ebay for wireless n usb.. Mac compatible..
    http://www.ebay.com/itm/New-EDUP-Mini-Wireless-11N-300M-USB-LAN-Card-WiFi-Adapte r-Nano-Card-Soft-AP-/150864362939?pt=US_USB_Wi_Fi_Adapters_Dongles&hash=item2320 377dbb#ht_3553wt_1165
    As you can see.. they are getting smaller and neater.
    I have no idea if it works .. haven't tried one.. but I have used USB wireless stick on the Mac to overcome this issue.
    You will need to set static IP .. not hard but you need to set specifics if you do buy one post again for the setup.

  • When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-tunes to play a single album and then stop, without continuing on through my entire library. It's a problem that doesn't occur when I'm listening through my i-pod.

    When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-Tunes to play a single album and then stop, without continuing on through my entire library? It's a problem that doesn't occur when listening on my i-pod.

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • I purchased movies through Apple TV at home. I then signed in to my itunes account on my ipad and the movies show up but they are listed as only accessible via icloud. How do I download them to my ipad so that I can view them on an airplane?

    I purchased movies via Apple TV. I want to view them on my ipad. I signed in to itunes and see them on my ipad but they are only accessible via icloud. How do I download them to my ipad to view where there is no WiFi?

    Hi there apearsal,
    Welcome to Apple Support Communities.
    It sounds like you’ve purchased movies with your Apple TV and want to know how to download those movies to your iPad, so that you can watch them later without a Wi-Fi network connection. Take a look at this article, it’ll walk you through the process of downloading purchases:
    Download past purchases - Apple Support
    Ciao,
    -Jason

  • HT4199 Need to access WiFi via PC. How to connect IPad to PC tower? Is an adapter part needed?

    Need to access Wifi via PC. How to connect IPad to WiFi via PC Tower? Ia an adapter needed? Any help is appreciated.

    To what purpose?
    If you are trying to share internet connection-you need to enable that in the OS on the computer.

  • How to display a popup window (DialogMessage) via code behind c#?

    hi all,
    How to display a popup window (DialogMessage) via code behind c#?
    I use sp 2013, in else case I want show the DialogMessage:
    if(condition)
    else
      HttpContext.Current.Response.Redirect(SPContext.Current.Web.Url+"/_layouts/TestError/ErrorDueDate.aspx");
    the above Redirect work good but I want show the error in a DialogMessage its better because of Usability and not redirect the user to new page...
    if not via code behind is there a better way to do it?
    thanks in advance
    Ahmad
    SP 2013 & SPD 2013 & VS 2013 & MSSQL 2012

    thanks for you answer,
    And yes I includ them via CDN, like below:
    <script
    type="text/javascript"
    src="http://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.min.js"></script>
    <script
    src="http://ajax.aspnetcdn.com/ajax/jquery.ui/1.8.9/jquery-ui.js"
    type="text/javascript"></script>
    <link
    href="http://ajax.aspnetcdn.com/ajax/jquery.ui/1.8.9/themes/start/jquery-ui.css"
    rel="stylesheet" type="text/css"
    />
    But I get still the above error in my previes post.
    SP 2013 & SPD 2013 & VS 2013 & MSSQL 2012

  • My MacBook Air and my iPhone are coupled but they cannot connect via bluetooth. How can I solde this ?

    My MacBook Air and my iPhone are coupled but they cannot connect via bluetooth. How can I solde this ?

    For what purpose are you trying to connect them?
    The only supported Bluetooth function between a Mac and iPhone is internet tethering.

  • HT201269 I have successfully sync'd my macbook and new ipad via itunes, but how do I sync the calendar, please ? I do not have icloud yet.

    I have successfully sync'd my macbook and new ipad via itunes, but how do I sync the calendar, please ? I do not have icloud yet.

    You can select the calendar to sync in the Info Tab in the iTunes window on the right, when your iPad is connected to the Mac , while iTunes is running and after you select the iPad on the left side under the devices heading.
    read for more information.
    http://support.apple.com/kb/HT1296

  • Why IPhone is getting hot when downloading via wifi and how to turn off itunes 11.1 launch automatically when plugged in Iphone to the PC

    Why IPhone is getting hot when downloading via wifi and how to turn off itunes 11.1 launch automatically when plugged in Iphone to the PC

    My brother with the iPhone 4 suffers from that too.
    My iphone 5 doesnt however.
    But to Stop Launch when your apple device is connected, 1. connect your iPhoneto your computer, 2.Go to the Summary Page, 3. uncheck the box "Open iTunes when this iPhone is connected" and then your good for that device.

  • How To display a table that resides in the database via JFrame.

    Hi,
    I need to display the contents that present in the table that resides in my database.
    Scenario:
    Im having Main frame window, in that im having a button, while clicking that button a new JFrame should be opened & it should display all the rows & cols of dat table that resides in my DB.
    I have no prob in opening a new JFrame during a button click, but i dont knw how to display table in the table format.
    I tried JTable but i dont know how to pass the data into the JTable.
    Kindly help me out!!!

    JTable relies on a TableModel to deliver data. You have several ways of providing this data:
    - Read it into either a Vector of Vectors (list of rows containing list of columns) or an Object[][] and create the JTable while passing the data.
    - Create a javax.swing.table.DefaultTableModel, pass it to the JTable as a model, configure it and call addRow() in order to add rows.
    - Create a custom table model class; see javax.swing.table.AbstractTableModel for a convenient base class

  • How to display username in RTF BI publisher report?

    Please advice how to display username in RTF BI publisher report?
    May be this can be done via hidden parameter of BIP report which default value will be set up with macro like {$username$} (or smth like)?
    Thanks in advance!

    Thanks. That worked. I was trying to get it as part of a multi-table query, aliasing dual. But that doesn't work in SQL Plus either so I guess I can't do that.
    I was trying
    select o.*, d.:xdo_user_name
    from oblix_audit_events o, dual d
    Before that I was trying
    select
    :xdo_user_name as USER_ID,
    :xdo_user_roles as USER_ROLES,
    :xdo_user_report_oracle_lang as REPORT_LANGUAGE,
    :xdo_user_report_locale as REPORT_LOCALE,
    :xdo_user_ui_oracle_lang as UI_LANGUAGE,
    :xdo_user_ui_locale as UI_LOCALE
    from dual
    but I must have fat fingered something because that works now too. Thanks.
    So if I need to do this in it's own query and I'm using an RTF template, how do I make that work?
    If I have to do it with it's own

  • How to display error message in Shopping Cart?

    How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

    Hi Paul,
    In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
    Regards,
    Noel

Maybe you are looking for