CSM upgrade from standard 25 to professional 50 Upgrade

Hi,
     I have the license for upgrading CSM standard 25 to professional 50(CSMSTPR-U-4.0-K9).  Would like to know the upgrade procedure. Can I directly upgrade from the standard to professional with only the license upgrade or do i need to do a full/fresh instalaltion of Professional.  Pls. help.
Thanks and Regards,
Rajeesh P

Hi Rajeesh,
You only need to install your professional license on your standard setup and you should be good to go, no need to start from scratch.
Regards,
Nicolas

Similar Messages

  • Office 2010 In-place upgrade from Standard to Professional Plus

    Hi,
    My current customer bought licenses (MAK keys) for both Microsoft Office 2010 Standard and Office 2010 Professional Plus. The majority of the estate will use Office 2010 Standard, with about 10% of the users using Office 2010 Professional Plus.
    I'm looking for a way to "upgrade" Microsoft Office 2010 Standard to Office 2010 Professional Plus, so I can deploy Office 2010 Standard as part of the installation baseline. I can successfully upgrade the existing Standard installation to Professional
    Plus, but after the installation any of the applications present in Standard show two licenses (one Standard license and one Professional Plus license).
    Is it possible to de-register the Office license during installation of Professional Plus or do any of you perhaps have another method to solve this?
    Thanks for your assistance.
    Kind Regards,
    Stefan Hazenbroek
    MCSE:S,MCITP:EA,MCITP:EMA2007,MCITP:EMA2010

    Hi Don,
    Thank you, it does help. My OCT is set to "Default Setup behavior; earlier versions of installed programs are removed". This works fine, all programs run successfully etc, the upgrade runs without any problem.
    However, the license for Office 2010 Standard is not removed/replaced during installation. Which means that after the upgrade, the applications show that two licenses are required. I am wondering if there is a way to tell during installation to remove previously
    installed licenses, to manually remove the license or any other way.
    The customer is using KMS, so in terms of activation it's no issue. I am wondering though if it's an issue in licensing itself. Because if we follow this scenario, when Office Pro is deployed, a workstation seems to need two licenses. If this is fine in
    licensing terms, I'm okay. If it isn't, I need to find another solutions.
    Thanks again!
    Regards,
    Stefan Hazenbroek
    MCSE:S,MCITP:EA,MCITP:EMA2007,MCITP:EMA2010

  • Package body "SYS.DBMS_SQLTUNE_INTERNAL" has errors after upgrade from standard to enterprise

    Hi
    I have upgraded my Oracle 11g 11.2.0.4  from standard to enterprise version.
    When I try to use the sqladvisor I recevie the error:
    There was a problem creating a SQL tuning task.
    ORA-04063: package body "SYS.DBMS_SQLTUNE_INTERNAL" has errors
    ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_SQLTUNE_INTERNAL"
    ORA-06512: at "SYS.PRVT_SQLADV_INFRA", line 245 ORA-01403: no data found
    ORA-06512: at "SYS.DBMS_SQLTUNE", line 684 ORA-06512: at line 1
    Looking the status of the packages, the package appears like invalid, When i try to recompile it  fails with error:
    Body
    3233
    25
    PL/SQL:
    ORA-00904: "P"."MASKED_BINDS_FLAG": invalid identifier
    Anybody know how can i recompile it ?
    I have look for the error in metakink but i can't find nothing
    thanks

    Pl detail how you upgraded to EE version
    https://docs.oracle.com/cd/E11882_01/server.112/e23633/intro.htm#UPGRD12355

  • Is there a way to upgrade from standard configuration to workgroup...

    ...without rebuilding the server?

    I actually meant can you upgrade the initial standard configuration that you choose at setup to the next option which is workgroup. The next choice after that is advanced. I did figure it out though. If you're in a standard config and you try and open server admin it asks you if you want to convert to the advanced config. There's apparently no way to upgrade from standard to workgroup.
    Thanks for the tip about standalone server though!

  • How do upgrade from standard x to pro

    How do you I upgrade from Standard X version to the X pro?
    I am using a fully legal and purchased copy of standard X.
    Thanks

    Hi B Schwartz,
    Please refer to the URL mentioned below foe further information on this.
    FAQ | Adobe Creative Suite
    Thanks,
    Vikrantt Singh

  • Is there an upgrade path from Standard to Premium Partner levels?

    If a partner enters at the standard level and then wants to move to the premium level, is there a process and would the cost work out to be the difference in plans?

    Hi,
    Yes, all you need to do is reach out to our accounts team by logging a ticket (portal -> help&support) when you are ready to upgrade from standard to premium.  You'll only need to pay the difference upon upgrading. 
    Kind regards,
    -Sidney

  • Upgrade from standard to enterprise on a cluster.

    SQL Server 2008 R2 Standard
    Windows Server 2012 R2 Standard.
    Two node Active/Passive Clustered, lets say NodeA is active and NodeB is passive.
    Need to upgrade the edition only from standard to enterprise.
    Want to understand if we need to apply the upgrade manually on both the nodes one by one
    or Only we apply the upgrade only on the passive node and it will get applied to the active node by itself once we failover to the passive node. Lets say we first run the upgrade from the passive node NodeB and after the setup completes, we manually fail-over
    from NodeA to NodeB. Once we fail-over, SQL Server will automatically apply the upgrade on the NodeA which is passive now. Any step by step documentation will be helpful.
    **** All the links I checked till now look ambiguous to me *****
    Thankyou.

    Hi
    Can't say I've done this but it's documented here:
    https://msdn.microsoft.com/en-us/library/cc707783(v=sql.105).aspx
    SQL Server in a clustered environment: Running
    edition upgrade on one of the nodes of SQL Server cluster is sufficient. This node can be either active or passive, and the engine does not bring the resources offline during the Edition Upgrade. After the edition upgrade it is required to either restart the
    SQL Server instance or failover to a different node.
    Upgrading the passive and failing over will be sufficient.

  • Question regarding Upgrading from Standard Edition to Enterprise Edition

    DB version:10gR2
    We want to upgrade from Standard Edition to Enterprise Edition.
    In the following documention
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/intro.htm#BABFBJCC
    It talks about
    Deinstall the Standard Edition server software.I don't understand what they mean by DeInstall the software.
    Question 1.
    By 'DeInstall' , they mean , use DeInstall Products in the Welcome screen of Oracle Universal Installer and Remove the chosen OUI Home.Right?
    Question 2.
    If i 'Deinstall' (ie. remove the software), all the binaries are lost. Right? So what is the point of having just the data files?
    Edited by: Citizen_2 on Apr 8, 2009 1:59 AM

    Citizen_2 wrote:
    DB version:10gR2
    Question 1.
    By 'DeInstall' , they mean , use DeInstall Products in the Welcome screen of Oracle Universal Installer and Remove the chosen OUI Home.Right?Yes, that means use OUI and deinstall the Standard Edition
    Question 2.
    If i 'Deinstall' (ie. remove the software), all the binaries are lost. Right? So what is the point of having just the data files?Because next point says install Enterprise Edition. For first get rid of old one and then install the needed one. There is no such option as upgrade in this case.

  • It won't let me upgrade my account from Standard to Pro. It keeps directing me back here. How do I either upgrade or cancel my current account?

    It won't let me upgrade my account from Standard to Pro. It keeps directing me back here. How do I either upgrade or cancel my current account?

    Hi er1nnosullivan,
    In case you face any issues placing your order please contact our chat support at: http://helpx.adobe.com/x-productkb/global/service-b.html
    Regards,
    Rave

  • Upgrade Oracle 9.2 - from Standard to Enterprise

    Can anyone please point me in the right direction on how do I -
    Upgrade Oracle 9.2 from Standard edition to Enterprise Edition.
    Any doc - highly appreciated..... [email protected]
    Thanx
    Deepak

    Hi Ontrack,
    first of all read note
    740897 - Info about the Oracle license scope; required Oracle options
    Running any SAP system on a non enterprise edition is not supported.
    Since SAP did not deliver the standard edition to you, somebody has installed the SAP system wrong in your corp...
    Because of the above, SAP does not provide a supported upgrade way, except a heterogenous system copy. Basically we did not test this scenario, because we don't support it.
    Anyhow, Oracle has a way for this:
    Metalink: How to Upgrade from Standard to Enterprise Edition
    Doc ID:      Note:117048.1
    The core part of this note is:
    The following steps need to be taken to convert your SE database to an EE:
        1. Backup the database
        2. De-install the SE software
        3. Install the EE software
        4. If you have an existing database, point your ORACLE_SID to this
           pre-existing database
        5. Startup the database
        6. Run the "catalog.sql" and "catproc.sql" scripts, as usual.
    Well, pretty easy isn't it?
    KR Lars

  • How to find table name for the fields from Standard Extractor in CRM system

    How to find table name of fields from the standard extractor in CRM system ?
    e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
    Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

    Hi ,
    Please find the link below for understanding BW CRM analysis.
    http://help.sap.com/bp_biv135/html/bw.htm
    activate the CRM DSs by scenario:
    1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
    SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
    2) Activate the Business Content DataSources (tcode RSA5).
    Select/enter the application component and choose Execute (F8).
    To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
    To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
    3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
    As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
    You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
    The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
    All BW-Adapter metadata is considered when versions are compared:
    Header information (Table SMOXHEAD)
    Mapping information (Table SMOXRELP)
    Global selection conditions (Table SMOXGSEL)
    Attribute key fields (Table SMOXAFLD)
    Hope this helps.
    Regards,
    csm reddy

  • Problems after CSM upgrade to version 3.3.1 Service Pack 1

    Hello,
    After CSM upgrade to 3.3.1 SP1, automatic IPS signature updates stop working with the following message:
    "Unable to communicate with locator service to retrive available files."
    IEV has stopped working as well. Error message is in the attachment.
    Has anyone experienced similar problem?
    Thanks in advance.
    Regards,
    Vesna

    Yes, that always work.
    Automatic IPS update has started working again since yesterday, without any reconfiguration on CSM. Do you maybe know what could be explanation for that?
    The other issue still persists. After CSM was upgraded to 3.3.1 SP1, IPS Event Viewer cannot be started from CSM. The following error message appears:
    "CreateProcess: .\cache\iev\bin\iev-launcher.exe
      https://CSM:443/athena/IEVServlet/user
      C6D7202102ECF1B3A8410987A91D3FF7 C6D7202102ECF1B3A8410987A91D3FF7
      startServerProxy error=267"

  • Adownloading xi pro from standard---

    when install says serial no no good---its correct---no one picks up phone for 1/2 hr to help me install----i am upgrading from standard bought w scan snap ix 500

    Is it by any chance asking for a QUALIFYING serial?

  • [Forum FAQ] Visio Standard 2013, Visio Professional 2013 template list and common uses

    As we know, Visio 2013 has three versions: Visio Standard 2013, Visio Professional 2013 and Visio Pro for Office 365.
    Visio Standard 2013:
    Easily create versatile diagrams using a rich set of new and updated shapes and stencils.
    Visio Professional 2013:
    Work as a team to easily create and share professional diagrams that simplify complex information.
    Visio Pro for Office 365:
    Take advantage of all features in Visio Professional 2013 as an always up-to-date subscription from Office 365.
    In my opinion, the biggest difference is business requirements which included product price and EULA. For the price, we could confirm the details from Microsoft store or local provider. In this article, we would
    only summarize the templates among the different versions. You also refer to the build-in template tables for better understanding.

    Visio 2013 template list (Part 2): 
    Item
    Template name
    Visio 2013 Std
    Visio 2013 Pro
    MAP
    Web Site Map
    ×
    √
    Value Stream MAP
    ×
    √
    Directional Map
    √
    √
    Directional Map 3D
    √
    √
    Site Plan
    ×
    √
    Floor Plans
    Floor Plan
    ×
    √
    Electrical and Telecom Plan
    ×
    √
    Office layout
    √
    √
    Home Plan
    ×
    √
    Space Plan
    ×
    √
    Site Plan
    ×
    √
    HVAC Plan
    ×
    √
    Plumbing and Piping Plan
    ×
    √
    Reflected Ceiling Plan
    ×
    √
    Security and Access Plan
    ×
    √
    Plant layout
    ×
    √
    HVAC control logic Diagram
    ×
    √
    Network
    Basic Network Diagram 3D
    ×
    √
    Basic Network Diagram
    ×
    √
    Detailed Network Diagram
    ×
    √
    Detailed Network Diagram 3D
    ×
    √
    Rack Diagram
    ×
    √
    SDL Diagram
    ×
    √
    LDAP Directory
    ×
    √
    Active Directory
    ×
    √
    Software:
    Wireframe Diagram
    ×
    √
    UML Activity
    ×
    √
    Chen’s Database Notation
    ×
    √
    UML Sequence
    ×
    √
    UML State Machine
    ×
    √
    UML Class
    ×
    √
    UML use case
    ×
    √
    IDEF1X Database Notation
    ×
    √
    UML Database Notation
    ×
    √
    Data Flow Model Diagram
    ×
    √
    Com and OlE
    ×
    √
    Enterprise Application
    ×
    √
    Program Structure
    ×
    √
    Conceptual Web Site
    ×
    √
    Data Flow Diagram
    ×
    √
    Crow’s foot Database Notation
    ×
    √
    Schedule:
    Patient medical process
    √
    √
    Calendar
    √
    √
    PERT Chart
    √
    √
    Gantt Chart
    √
    √
    Timeline
    √
    √

  • How to get attribute value from standard page ?

    Hi,
    How to get attribute value from standard page ?
    String str = (String)vo.getCurrentRow().getAttrbute("RunId");
    But this value is returning a null value ....
    Can anyone help me to get this attribute value which is actually having a actual value .

    getCurrentRow() would always return null if no setCurrentRow() is used.
    Please check the page design and understand how many rows of VO are there. You can also use the following to get the row:
    vo.reset();
    vo.next();
    Regards
    Sumit

Maybe you are looking for

  • Is there a way to change the categories in the Personal Finance Template

    I am trying to use the Personal Finance Template rather than developing one for myself.  Is there a way to change the Cateorgies that are listed in the template?  Those don't work for me!

  • Connecting 2 external VGA monitors to an E535

    I already have one external VGA monitor connected to my Thinkpad E535 via the VGA port. What is the best way to connect a second VGA external monitor? Should I use a VGA-USB or VGA-HDMI converter? Do the converters need to have their own graphics car

  • Only balance in local currency

    Hi our base currency is UDS. One of the GL ( bank account in Germany ) is set up as document currency ( euro ) and " only in local currency " check box  is unchecked ( FS00 , control tab ). Now  when I try to load the plan data into system, all the v

  • How to create Clent in ECC 6.0

    Hi All, How can we create client in ECC 6.0 version. and i want some BASIS important material can you please help me regarding this issue. Thanks All, SRIRAM

  • Form will not print the typed information?

    My forms will not print the typed information only the form itself as a blank form. I have Acrobate 8 Professional V. 8.3.1 Please advise on how to correct this annoying problem that started with the latest update. Thanks