CSM Upgrade with license for CSM 4.3

Hi Experts,
Good Day!
I have an installation task about the CSM. We bought early last year a CSM 4.3 with license applicable for 4.3 and now I wanted to install version 4.6 of CSM. My question is, does it have any issues as far as the licensing is concerned?
Thank you,
niks

To upgrade from Security Manager 4.0, 4.0.1, 4.1, 4.2, 4.3, 4.4, or 4.5, you do not need to apply any licenses. Your existing license is valid.
http://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/4-6/installation/guide/instl_wrapper/licensing.html#pgfId-1111350

Similar Messages

Upgrading ASA licenses on CSM

Hi is there anyone who knows how to upgrade an ASA license (the Security Plus License) using CSM 7.0?

CSM does not manage device licenses, so you cannot do it in CSM.
What you can do is use a FlexConfig to push the command "activation-key xxxx" from CSM, or use CLI to do it. It will not cause CSM problems because CSM will not see it in the config since it is not stored in there anyway.
I hope it helps.
PK

Problems with License for Nokia Navigator

After I have upgraded the Firmware to 30.x.x I had to buy a new license for the navigator that is build in.
I had bought jun 2006 a two year license but the license key is not accepted anymore.
Because I needed the navigator I had to buy a new license.
I have bought one for 30 days in the assumption that I could contact Nokia quit easily to get a solution for this issue.
I have searched the entire website to contact Nokia about this but I can not find an e-mail address to get contact with the shop.
Does anyone has an contactpoint where I can address this issue to Nokia?
Peter

The licence is deleted during the update, but it is linked on the Nokia servers to your IMEI number so you didn't need to buy again, you should have gone to the Update option in the Maps menus to resynchronise your existing licence with the updated phone.
Nokia can be contacted via the "Contact us" link above.
Message Edited by mccbleue on 26-Sep-2008 08:31 PM

Upgrade SSL License for ASA5540

Hi,
I have ASA5540 with 1000 SSL-VPN License, then I would like upgrade from 1000 to 2000. Which part I have to add between
L-ASA-SSL-1000=
L-ASA-SSL-1K-2500=
ASA5500-SSL-1000=
Thanks,
Pongsatorn

SSL-VPN licenses are not additive. So if you want to move up from a 1000 user license, the next tier is 2500 users. The second SKU above is the correct part to order in that case.
The first SKU is for 1000 users only (base AnyConnect Premium license for 1000 users). The third SKU is another way of packaging the same thing as the first one.

Most Frustrating Can't Upgrade DRM License For Windows Media Player 12 On Windows 8.1

I am very upset. I have been trying ALL DAY to get the DRM license so I can play music that I BROUGHT and PAID for years ago. Why did the DRM license not come with WMP 12 before it got uploaded to PCs run Windows 8.1? Can you just send an update that is
the DRM for WMP12? At this time, I really don't know what to do because everything I have tried has not WORKED!!! Would you PLEASE fix the page where you can upgrade so you can actually UPGRADE? I NEED help. I really want to hear my music. I miss it.
Thank you for your time
Rachel Sample

See: Windows Media Player DRM: frequently asked questions
Carey Frisch

Photoshop 0.6 with license for Mac OS X ????

I Have a licensed photoshop 0.6 . I want to run this with my Mac OS X . What can I do???

There's no such thing as "Photoshop 0.6".
Are you referring to the ancient Photoshop 6 ? The relatively new and still sold CS6?

Soasuite upgrade with patch for 10.1.3.3.0 (windows) - BPEL vanishes

I applied the 10.1.3.3.0 patch to my existing SOA Suite 10.1.3.1.0.
the BPEL Console and Rules Author go missing.
Is there anyone who has experienced this??
if YES, can those fortunate plz lemme know what was done to set this right...
thanks,
ATC-OD-EMEA

After a digging into this for almost a day, i finally cracked this..
The problem arose becuase of a space in my path entry.
eg. c:\Program Files\qt
I removed such entries from the path and installing all over again, it worked.
Cheers-
Ashish.

Upgrading license for more context cisco asa 5580

Hi guys:
This is the situation I got to firewalls with failover and I need to upgrade the license so I can get more context (right now I have 5 context and I need 10) so I was looking at the procedure and I'm not sure If I need to restart the device or not. I was looking at this procedure:
Upgrading the License for a Failover using ASDM (No Reload Required)
Use the following procedure using ASDM if your new license does not require you to reload. This procedure ensures that there is no downtime.
•1.       On the active unit, choose Configuration > Device Management > High Availability > Failover > Setup, and uncheck the Enable Failover check box. Now click Apply. The standby unit remains in a pseudo-standby state. Deactivating failover on the active unit prevents the standby unit from attempting to become active during the period when the licenses do not match.
•2.       Choose Configuration > Device Management > Licensing > Activation Key, and enter the new activation key that you obtained with the active unit serial number. Now click Update Activation Key.
•3.       Log into the standby unit by double-clicking its address in the Device List. If the device is not in the Device List, click Add to add the device. You might be prompted for credentials to log in.
•4.       Choose Configuration > Device Management > Licensing > Activation Key, and enter the new activation key that you obtained with the standby unit serial number. Now click Update Activation Key.
•5.       Log into the active unit again by double-clicking its address in the Device List. Choose Configuration > Device Management > High Availability > Failover > Setup, and re-check the Enable Failover check box.
•6.       Click Apply. This completes the procedure.
link: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00806b1c0f.shtml#norelasdm
But then I checked on the cisco web page that there are some license that need to reload I see this:
All models
Downgrading any license (for example, going from 10 contexts to 2 contexts).
Note If a temporary license expires, and the permanent license is a downgrade, then you do not need to immediately reload the security appliance; the next time you reload, the permanent license is restored.
link: https://www.cisco.com/en/US/docs/security/asa/asa81/license/license81.html
So I just want to know if I'm UPGRADING from 5 to 10 context the reload applies to my situation or not?
Regards

No reload is required when you are upgrading from 5 to 10 security context license.
Reload is only required on the following feature:
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/license.html#wp1361750
Hope this helps.

Weblogic license for 6.1

Our license file which works for 6.0 does not seem to work with
weblogic6.1
Do we need to get a new license file or is there something I am missing

Hi,
yes, you will need to upgrade your license for 6.1. Here's a link for
you: http://websupport.bea.com/custsupp/wls6_license.htm
Nils
Larry Presswood wrote:
>
Our license file which works for 6.0 does not seem to work with
weblogic6.1
Do we need to get a new license file or is there something I am missing--
============================
[email protected]

CSM upgrade from standard 25 to professional 50 Upgrade

Hi,
I have the license for upgrading CSM standard 25 to professional 50(CSMSTPR-U-4.0-K9). Would like to know the upgrade procedure. Can I directly upgrade from the standard to professional with only the license upgrade or do i need to do a full/fresh instalaltion of Professional. Pls. help.
Thanks and Regards,
Rajeesh P

Hi Rajeesh,
You only need to install your professional license on your standard setup and you should be good to go, no need to start from scratch.
Regards,
Nicolas

Problems after CSM upgrade to version 3.3.1 Service Pack 1

Hello,
After CSM upgrade to 3.3.1 SP1, automatic IPS signature updates stop working with the following message:
"Unable to communicate with locator service to retrive available files."
IEV has stopped working as well. Error message is in the attachment.
Has anyone experienced similar problem?
Thanks in advance.
Regards,
Vesna

Yes, that always work.
Automatic IPS update has started working again since yesterday, without any reconfiguration on CSM. Do you maybe know what could be explanation for that?
The other issue still persists. After CSM was upgraded to 3.3.1 SP1, IPS Event Viewer cannot be started from CSM. The following error message appears:
"CreateProcess: .\cache\iev\bin\iev-launcher.exe
https://CSM:443/athena/IEVServlet/user
C6D7202102ECF1B3A8410987A91D3FF7 C6D7202102ECF1B3A8410987A91D3FF7
startServerProxy error=267"

Installing License on CSM 4.3

Hi Everyone,
I am installing CSM 4.3 on new Server.
During installation it asking for License Location.
I have only 2 CDs that came with CSM.
Where should i look for license of CSM 4.3?
Regards
MAhesh

You should have also received a cardboard sheet with the Product Authorization Key (PAK) for your purchase. You need to use the code printed on it and go to http://www.cisco.com/go/license and enter it.
You will then be e-mailed the license file which you save to your server and then direct the setup to the saved file location.
If the PAK has been lost, you can call the TAC (or your reseller) and ask for assistance. In that case, you will need the sales order number for your purchase.

HT4461 Hello I have just installed my license for OS v 10.6.3 and installed the upgrades on a new hard drive. I would like to upgrade to my license for Lion. How do I do this (through the Apple Store I guess). Cheers

Hello, I have just installed my license for Mac OS v 10.6.3 and installed updates including security updates.
I have a licence for Lion that is sitting on Apples computer somewhere.
How do I access my account and install Lion on my machine?
Beyond that I want to upgrade to Maverick but given I work out the first step upgrading to Maverick should be easy.
Thanks, Julian R A

Welcome to Apple Support Communities
OS X Lion could be purchased from the Mac App Store (and now, at the Apple Online Store). Once you purchase it, you can download it as many times as you want for free.
Open  > Software Update, and install the most recent Mac OS X version. It should be Mac OS X 10.6.6 or newer. Then, open the Mac App Store, go to Purchases, log in with your Apple ID and download OS X Lion. Make a backup before upgrading and check that your apps are compatible > http://www.roaringapps.com
You can upgrade to OS X Mavericks from Mac OS X 10.6.6 or newer without any problem, so upgrading to OS X Lion first is a waste of time. Open the Mac App Store and download OS X Mavericks

CSM problem with Adapter Teaming

Hi,
A CSM has been configured with a TCL scripted keepalive to retrieve a dynamic page from each server in the serverfarm. The script reads the data returned by the server and detects a specific string in the page.
The servers are dual-attached with two Broadcom NetXtreme Gigabit adatpers, configured with BASP Teaming (Smart load balancing with failover). This mode of operation allows outbound and inbound load balancing. Each adapter has its own MAC address.
Symptom :
We observe that the servers status swing between OPERATIONAL and PROBE_FAILED at random intervals. We suspect that the problem comes from the adapter teaming mode of operation. We see the CSM ARP table swinging between the two adapter MAC addresses for a specific IP address. I conclude that the CSM updates its ARP table for unicast packets as well.
When the ARP table points to the primary interface, the server status is OPERATIONAL, when the CSM ARP table points to the second adapter, the server status go to PROBE_FAILED.
Is is a know issue ? Is the CSM incompatble with adapter teaming ? We also have CSS devices probing the same servers at the same time, but without problems
Thank you for any advice
Yves Haemmerli

It is not a CSM trouble but more a teaming trouble.
If you connect trought the console management instead of telnet you may see message like this one:
xdxh: %CSM_SLB-6-RSERVERSTATE: Module x server state changed: SLB-NETMGT: Got different MAC address from server x.x.x.x in response to ARP
If you have that kind of message it meens that the server is using both interfaces for the same IP address.
If it is the case you should have a look to your teaming configuration.

I have a license for photoshop 10. Can I download a copy and upgrade it?

I have a license for photoshop 10. Can I download a copy and upgrade it?

You can also buy CS6 for $700 instead of paying $10 a month the first year for Photoshop CC followed by $20 a month till Adobe changes the monthly charge for CC. If you stop paying your copy of CC will deactivate at some point. And PSD files saved with CC will all not be fully compatible with prior versions of Photoshop. Your new Actions and scripts may also not be compatible with older versions of Photoshop.

CSM Upgrade with license for CSM 4.3

Similar Messages

Maybe you are looking for