CSO Standard Reports Technical name & Discription

Hi Guys,
I am Srinivasa. Please let me provide any one standard reports of Customer Service Order (CSO) only report technical name and description. It is very need for me.
This is my mail id: [email protected]
Regards,
Srinivas

Hi Srinivas,
pls chk this link,search for CSO REPORTS:
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
u will get all CSO STD Reports.
**Some are **
1.Average Order Volumes -Technical name: 0CSRV_C01_Q0101
2.Rate of Order Completion -Technical name: 0CSRV_C01_Q0102-Based on InfoProvider: 0CSRV_C01
3.Lead Time of Service Orders -Technical name: 0CSRV_C01_Q0103
4.Delayed Services with Requested-By Date -Technical name: 0CRM_PRI_Q0101
*PLS assign points, if link is useful*
RegardsCSM Reddy

Similar Messages

BI Report information :Report technical name - Report name - Last run date

hi,
I want to know how we gather the information about the total reports present in production environment in following format.
Report technical name - Report name - Last run date
I know a table RSZCOMPDIR where we can find technical name and last run information, but this table does not give Report name.(description)
Is there any other table which can give me this information???

Hi Amruta,
check the following forum link which is already posted . probably it will help.
[How to find out Query last used by whom|How to find out Query last used by whom]
Regards
Sree

Re:reports(technical name)

Morning gurus
I am running some reports in bex analyzer how can i know the technical name of any report query and how can i find whether it is a sap standard one or z report
thanks
pv

Hi PV,
While opening a report in Analyzer > click on properties
You will get the Tech name of the Query.
Or
Click on Information in the report output of the Query.
You will have 0 prefixed for SAP Standard Queries.
If there is no 0 infront of the Query name...that is customized.
Regards,
Ram.

Find the technical name of a report in Crystal 2008(XI R/3)

Hi,
I know the report technical name(system genetared) is availble at properties tab in CMC in crystal XI R/2, but I am unable to find the same in XI R/3. Also let me know how to create a open document or generate URL for XI R/3 reports.
Thank you,
Regards,
Preetham

Hello Preetham,
I recommend to post the first question to the [BusinessObjects Enterprise Administration|BI Platform; forum.
The URL documenttion for opendocument R3 is [here|http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_url_reporting_opendocument_en.pdf]
Best regards,
Falk

Web Page title is showing technical name of the report

When BI report is running from portal (web), in the wab page titel is showing report technical name. But i want to display report description,
If any one knows about this pls send me the how fix that. I am working on BI 7
Thanks
Samit

Hi,
Have you used a Text Item for displaying the name of the Query ? If yes, in the properties of the Text Item, you would have binded the Data Provider. Here, you can give the option of Displaying General Text and the General Test Item can be the Query Description.
Pls let me know if you have used somthing else or in some other way.

Can we remove the Technical name appearing in the standard SAP BI Pop-Up.

Hi,
Can we remove the Technical name appearing in the standard SAP BI Pop-Up Varaiable Screen(Selection Screen)-When we create Variable screen for BI Reporting we should specify the technical name and create it,where it appears in the Pop-Up screen within the brackets,can technical name be removed ?
Please help me out to solve this issue.
Thanks,
Preethi

Hi,
As per my logic, one can change description of all bi objects which includes text Input variables also.
If possbile be more specific what u want to change in Pop
Regards,
Sachinkumar.

How to print the name of layout description on standard report ?

Dear all,
I have saved a user specific layout.
When i see the print preview system shows the name of standard transaction as report name,whereas i want to print and view the name of layout as report heading(name).
Can it be possible?
If yes plz give us the valuable inputs.
Thanks in advance.
Regards,
Vikram Chavan.

Hi,
In your report program, use FM "GET_PRINT_PARAMETERS" and use the field PRI_PARAMS-PAART. This will have the req. value.
else
use sy-PLAYO field to dispaly the layout name.
Best regards,
Prashant

Fathers name not appearing in HR standard Reports

Dear All,
Currently we are in process of using the standard pension reports like Form4 P.S, Form5 P.S etc(Tcode : PC00_M40_EPN).
In the report output , we observe that the Father's name field is not getting populated.
On Analysing further, we understood that.
1.In the implementation stage, we had mapped the father subtype to '3' instead of the default '11'.
(Personal Management>Personal Administration>Personal data --> Family-> Define possible family members).
2.In all the standard pension reports ( tcode : PC00_M40_EPN , PC00_M40_PNY etc ),the select query in the ABAP programs hardcodes subtype '11' to fetch for father detail from infotype table PA0021(Family Member/Dependents).
3.We have a lot of data mainatined in the current production system with sybtype '3' mapped to father.Hence cannot change it at present.
Is there any way out to display the fathers name in the standard HR reports ?Possible alternatives..?
Thanks,
Rijuraj

Dear John,
After considerable thought we decided not to change the config.We also have some custom developments which uses the father subtype.All these data would need to be deleted and corrected.
Hence we directly modified the relevant subroutine in the standard reports and changed the value from '11' to '3'.
The reports now work fine.
Thanks.
Regards,
rijuraj
Edited by: Rijuraj Raju on Sep 21, 2011 1:10 PM

Including Vendor Name in Standard report 'MB51' transaction

Hi Friends,
I have a requirement of Displaying the Vendor Name in the standard report 'MB51', after the vendor No.
I checked the report and it is really confusing ..... ( i ve seen something like when i double click the document number it is going to 'Display material Document - 147404608' something !! ........
I want the same report with vendor name included ... is that possible ????
One more doubt .... i actually copied the Program 'RM07DOCS' with the includes to a name 'ZRM07DOCS' but when i execute with plant '0020' iam getting an error 'Selection was not restricted' though iam not getting the error when i give the same selection criteria in the Standard report....
Expecting ur replies :-|
Thanks in advance
Cheers,
R.Kripa.

Hi,
I did similar requirement but in my case the tr code was mb5b but anyway approach would be same ,please check steps below.
1) Copy standard report to a Zreport. copy everything including includes , texts etc.
2) Now put a break point at REUSE_ALV_LIST_DISPLAY , it might be possible that its used multiple times. so just cross check which list display is showing results.comment out this REUSE_ALV_LIST_DISPLAY.
3) Now say you have to add 2 extra fields to report.define you own internal table with all the fields you needed.move the final internal table to your internal table.
4) build your own field catalog for your internal table.
4) using select queries fetch field values of those 2 extra fields for each record.and then use resue_alv_list_display or resue_alv_grid_display in place of original list_display. pass fieldcatalog and your final internal table to it so as to get output desired.

Technical Names appearing in the report output

Hi Experts,
I am in support and got a strange case. When one of the users runs the report in web, he sees technical names of the fields instead of their description. On the contrary, when I run the report, everything comes fine. I don't know where the problem could lie. If you can help me, that would be really great.

Hi Shobhit,
Please check that if the objects are Translated to the language User is using.
When you try to run the report, you might be using English as default language and everything is there in English only.And when user tries to run the report, most possibly use's login Language must be different.
You can crosscheck this by using the users language while logging in to Analyser,
If this is the case (Translation) even you will see the Technical names.
For Translation Help :
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30a65c3a-2ad5-2910-a4be-88412392cfe5]
Hope this helps.
Best Regards,
Pratap Sone

Bex Query calc key figures in Crystal report not showing technical names.

Hi,
I have created calculated key figures in a BEx query for which the data comes from a SAP BW cube. I have assigned each of the calculated key figures a proper technical name which I expect to see when I bring it to crystal report. When I bring that query in Crystal as a data source the calculated key figures show a wier network id names instead of the technical names. I am having a problem in using those wierd technical name in my report and my formula's as I am not able to identify what is what.
Please urgent help requested.
Thanks
Mahendra

I dont have an account on such website. I will explain u the problem in detail.
When I create a calculate key figure in SAP BEx query designer I assigned a technical name to it, a meaningful one. In my case one such example is Actual_revenue is the name that i have assigned and the description is Actual revenue. When I create a crystal report from it and in that report if i create a formula.
I get this {ZIC_COPA_Z_SALES.[Measures]-[25V1KYL4VE92X0T4OMHVYM90V]}
If u see it its a wier 25 digit name.
Instead of this I want to see
{ZIC_COPA_Z_SALES.[Measures]-[ACTUAL_REVENUE]} which is what I have given in the query. I am using the SAP BW MDX driver to connect to Bex query.

Technical name disply for Report

Hi All,
I am facing a strange issue in reporting. When User is executing a portal report from BEx web analyzer, only Technical name of the report is diplaying on Output of the Report. Iif I execute from my system even with the same user id it is diplaying description. Anyone has idea what might be the cause and how to resolve this issue.(User is connecting the system with other than english as Language). I hope something related to Translation.
Thanks in Advance
Vani

Hi,
Please ask the user to log in in the English Language.Or else transport the query in their language.
In our case, we transport the query in the client's language, Then the query description will be seen by the user in their language.
Hope it helps....

Technical names in reports

hi experts
i need to see technical names / transaction codes in reports like FBL1N etc.against every line items displayed. i did chked dynamic selection layouts etc therz no option to display t-codes in coulmns.
kindly help
thanx
Asif Shahzad Moughal

hi radhika
thanx very much 4 reply actully it was my practice test which i did solved. in fbl1n while wen u execute report.now u hav to do:
menu>settings>special fields click new entries
table= BKPF & field name TCODE
now u can c this is available in hidden fields
settings>layout>current
from ur answer i did get table name tht was helpul
thanx
Asif Shahzad Moughal

Display description of report rather than the technical name

Hi all
I have made a few reports using the Bex report designer that have been emailed to end users by the bex broadcast facility as a PDF
However, when end users receive the email the attached PDF received has the technical name rather than the description.
Does anyone know how to change this so that end users receive the PDF with the description rather than the technical name.
Many thanks
Forhad

Yes the DOS 8.3 shortname format is the only accepted for the ThinkVantage button registry key.
One general way to obtain DOS 8.3 formats from a path except from DIR /x in a CMD window is to use execute a VBSCRIPT file that uses the FileSystemObject class
If you save the following sample vbscript code to a text file with .vbs extension and open it in file explorer it will write the short path of LSC.exe to a file text file named "Path_DOS83.txt":
'Convert a full path to DOS 8.3 Shortname format and save to text file
With CreateObject("Scripting.FileSystemObject")
.CreateTextFile("Path_DOS83.txt",True).Write(.GetFile("C:\Program Files\Lenovo\Lenovo Solution Center\LSC.exe").ShortPath)
End With
What the code does it creates a File System Object instance and calls .CreateTextFile and writes the ShortPath of the File object obtained by the .GetFile function.

Report output showing in technical names

Hi,
When I execute a query, input variables and report out put are shown up generally in InfoObject descriptions before. Just suddenly what happened don't know these reports are showing up output in Technical names, Input variables and the report as well. Where do you make this to set as default to display in InfoObjects descriptions input variables and the report as well instead of technical names. Kindly help, I appreciate your answers. Thanks
regards,
reddy
Edited by: chreddeppa on Oct 21, 2011 8:13 PM

Sometime it happens because of the lanugate setting of the browser.
If the browser is internet explorer, you can go to Tools > Internet Option > General > Language and if you are using English, it should be added there (and I guess as first language).
Try if it solves your issue.
Regards,
Gaurav

CSO Standard Reports Technical name & Discription

Similar Messages

Maybe you are looking for