CSRF Token not received - XSODATA

Hi,
I am trying to fetch CSRF Token in a request using POSTMAN client. But the same is not received . Screenshot attached. Any donuts ?
Sreehari

Does your XSACCESS file have CSRF enabled? If not add this line to the XSACCESS:
"prevent_xsrf" : true
I tested and if the prevent_xsrf is not set then even when you ask to fetch the CSRF token the request is ignored. However as soon as I changed the value in the XSACCESS file it sends the CSRF token when requested.

Similar Messages

I believe I have implemented it correctly but I am not receiving the notifications on my phone. I have an ad hoc provisioning profile set up. I have the device token from the phone through NSLOG to console. I have the dot net code running without errors.

I believe I have implemented it correctly but I am not receiving the notifications on my phone. I have an ad hoc provisioning profile set up. I have the device token from the phone through NSLOG to console. I have the dot net code running without errors.The notifications just don’t appear.
Any ideas where I am going wrong?

IMAP account access by itself does not provide for syncing contacts, calendar events, and notes or anything over the air. This is possible with an Exchange account accessed via ActiveSync with the Exchange Server.
If your company email account is an Exchange Account, your company's IT Dept. has enabled IMAP account access for your Exchange account on the Exchange server?
If an Exchange account, the IT Dept. must have ActiveSync enabled for your account on the Exchange Server to create and access the account as an Exchange account which provides Push access for received messages, and over the air syncing for contacts and calendar events with the Exchange Server.

Calendar Server user can not receive external invites

Hi,
We have a MacPro running ML Server 10.8.5 with 10 user accounts using the calendar and file server services.
Calendar server is where the issue is. We have 10 + users that are set up to send and receive external invites in calendar server without a problem. Recently, one of the user accounts stopped receiving external invites. The problem began not long after I set up a second account for the same user for their shared calendars (they requested this so all shared cals were not on their iOS devices). Although I used a separate email, it was an alias of the first so may have caused a conflict / problem (?). I got rid of the second account with no change to the first.
The account still receives invites from the other internal user accounts and the other services such as file sharing are unaffected. There are no other problems with the functionality of that user, in calendar or otherwise.
I have tried changing the email associated with that user account and setting up a new test user account (in Server). The email invite will still not come through.
I have changed it back to the way it was originally.
Summary
One of 10 user accounts does not receive external invites
Was working until recently
The account can send invites to external addresses
Same email address will not work even when associated with a different account
I have included a large section of the calendar error log from the part that references the email address (in red) attached to the user account in question. Apologies, I am not familiar with deciphering this information. That is why I've come here.
Any help would be very much appreciated. Thanks.
Error Log Info
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.cache.MemcacheResponseCache#debug] Adding to cache: '21a0cc58845276ae69a523c52cc9d642' = '((I0\\nNtp1\\nI6863881604889304901\\n(I0\\nNtp2\\n(dp3\\n(I207\\n(dp4\\nS\\'DA V\\'\\np5\\n(lp6\\nS\\'1, access-control, calendar-access, calendar-schedule, calendar-auto-schedule, calendar-availability, inbox-availability, calendar-proxy, calendarserver-private-events, calendarserver-private-comments, calendarserver-sharing, calendarserver-sharing-no-scheduling, calendar-query-extended, calendar-default-alarms, addressbook, extended-mkcol, calendarserver-principal-property-search, calendarserver-principal-search\\'\\np7\\nasS\\'Content-Type\\'\\np8\\n(lp9\\nS \\'text/xml\\'\\np10\\nasS"<?xml version=\\'1.0\\' encoding=\\'UTF-8\\'?>\\\\n<multistatus xmlns=\\'DAV:\\'>\\\\r\\\\n <response>\\\\r\\\\n <href>/principals/__uids__/E47FA586-0340-45AF-8DDB-70F0B77E5A06/</href>\\\\r\\\ \n <propstat>\\\\r\\\\n <prop>\\\\r\\\\n <calendar-user-address-set xmlns=\\'urn:ietf:params:xml:ns:caldav\\'>\\\\r\\\\n <href xmlns=\\ (truncated, continued)
2013-10-01 15:50:43+1000 [-] [caldav-1] 'DAV:\\'>/principals/__uids__/E47FA586-0340-45AF-8DDB-70F0B77E5A06/</href>\\\\r \\\\n <href xmlns=\\'DAV:\\'>/principals/users/ashtonbishop/</href>\\\\r\\\\n <href xmlns=\\'DAV:\\'>mailto:[email protected]</href>\\\\r\\\\n <href xmlns=\\'DAV:\\'>urn:uuid:E47FA586-0340-45AF-8DDB-70F0B77E5A06</href>\\\\r\\\\n </calendar-user-address-set>\\\\r\\\\n <displayname>Ashton Bishop</displayname>\\\\r\\\\n <email-address-set xmlns=\\'http://calendarserver.org/ns/\\'>\\\\r\\\\n <email-address>[email protected]</email-address>\\\\r\\\\n </email-address-set>\\\\r\\\\n </prop>\\\\r\\\\n <status>HTTP/1.1 200 OK</status>\\\\r\\\\n </propstat>\\\\r\\\\n </response>\\\\r\\\\n</multistatus>"\\np11\\ntt.'
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [HTTPChannel,31943,192.168.15.1] [twext.web2.server#info] PROPFIND /calendars/__uids__/AE518560-2AD4-49AC-8DA6-05CCB82C4D7C/719e7bd2-73b9-485b-b1c 8-83ad63011a05/ HTTP/1.1
2013-10-01 15:50:43+1000 [-] [caldav-1] [HTTPChannel,31943,192.168.15.1] [twistedcaldav.directory.digest.DigestCredentialsMemcache#debug] Getting Cache Token for '178760298581319517811431231781551239741271129174943556363'
2013-10-01 15:50:43+1000 [-] [caldav-1] [HTTPChannel,31943,192.168.15.1] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [HTTPChannel,31943,192.168.15.1] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [calendarserver.platform.darwin.od.opendirectory#debug] Checking digest auth for user 'intern2' (tries remaining: 3)
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [calendarserver.platform.darwin.od.opendirectory#debug] Digest auth for user 'intern2' result: True
2013-10-01 15:50:43+1000 [-] [caldav-1] [-] [twistedcaldav.cache.MemcacheResponseCache#debug] hashing key for get: ('PROPFIND', '/principals/__uids__/AE518560-2AD4-49AC-8DA6-05CCB82C4D7C/', '/calendars/__uids__/AE518560-2AD4-49AC-8DA6-05CCB82C4D7C/719e7bd2-73b9-485b-b1 c8-83ad63011a05/', '0', -6078480706465304126) to '97c1466c67a97bfc6d06eb3e3f7a3153'
2013-10-01 15:50:43+1000 [-] [caldav-1] [-] [twistedcaldav.cache.MemcacheResponseCache#debug] Checking cache for: '97c1466c67a97bfc6d06eb3e3f7a3153'
2013-10-01 15:50:43+1000 [-] [caldav-1] [-] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [-] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.cache.MemcacheResponseCache#debug] Not in cache: '97c1466c67a97bfc6d06eb3e3f7a3153'
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcacher.Memcacher#debug] Getting Cache Token for 'AE518560-2AD4-49AC-8DA6-05CCB82C4D7C'
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [txdav.base.datastore.util.QueryCacher#debug] Getting Cache Token for 'homeMetaData:6262'
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcacher.Memcacher#debug] Getting Cache Token for '6262'
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [txdav.base.datastore.util.QueryCacher#debug] Getting Cache Token for 'objectWithName:6262:719e7bd2-73b9-485b-b1c8-83ad63011a05'
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [-] [twistedcaldav.memcacher.Memcacher#debug] Getting Cache Token for 'E47FA586-0340-45AF-8DDB-70F0B77E5A06'
2013-10-01 15:50:43+1000 [-] [caldav-1] [-] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [-] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [txdav.base.datastore.util.QueryCacher#debug] Getting Cache Token for 'homeMetaData:6241'
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcacher.Memcacher#debug] Getting Cache Token for '6241'
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [txdav.base.datastore.util.QueryCacher#debug] Getting Cache Token for 'objectWithName:6241:calendar'
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 4, #busy: 1, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Freed client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Clients #free: 5, #busy: 0, #pending: 0, #queued: 0
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [txdav.base.datastore.util.QueryCacher#debug] Getting Cache Token for 'homeChildMetaData:6242'
2013-10-01 15:50:43+1000 [-] [caldav-1] [PooledMemCacheProtocol,client] [twistedcaldav.memcachepool.MemCachePool#debug] Busied client: <twistedcaldav.memcachepool.PooledMemCacheProtocol instance at 0x10a50e200>
2013-10-01 15:50:43+1000 [-] [caldav-1]

Thanks so much for your comment ~morgen.
Sorry, I should have mentioned, that it what my first thought so I tested by ensuring the email address associated with the user account (not hosted on the server but by Google Apps) is recieving all other mail.
I have also tried:
- Setting all accounts (calendar, email and contact card with associated email address) in another local user on a defferent Mac. So it's not a local user or Mail app issue.
- Sending invites from different Calendar apps and email accounts - iCloud, Gmail (both using Apple Calendar and the web interface).
That's why I came back around to thinking it must be calendar server related. However is there is absolutly no conntact with the server with incoming email invites I must be looking in the wrong place (and the wrong forum - sorry!).
Does anyone have any ideas where I should be focusing my efforts?
Many thanks in advance.

ICloud mail not receiving

I'm not receiving emails through iCloud. I can send emails to my other email accounts from the iCloud and these are received in the appropriate mail accounts. Any mail sent to my iCloud addresses from any of other mail accounts are not arriving. I was curious when I'd not received any new emails on my iCloud account for a day (this is unknown).
I looked into contacting Apple support for help only to find they'll only assist for £25. As I consider this an insult, I'd really appreciate help from anyone who can advise what the problem might be.
Thank you
Andrew

Hello Andy Marlow
I would recommend taking a look at the troubleshooting steps found in the article below if you are unable to receive iCloud mail.
iCloud: Troubleshooting iCloud Mail
If you can't receive mail in OS X Mail
Locate the name of your iCloud account on the left side of the main Mail window. If your iCloud account name is dimmed and has a lightning-bolt symbol next to it, your account is offline. To bring your account online, make sure that your computer is connected to the Internet, then choose Mailbox > Take All Accounts Online. If that doesn't resolve the issue, follow these steps:
Choose Preferences from the Mail menu.
Click Accounts in the Preferences window.
Select your iCloud account from the list of accounts.
Click the Advanced tab and verify these settings:
Port: 993
Use SSL: (selected)
Authentication: either "Password" or "Apple Token"
-Griff W.

I just updated to Maverick and now my .mac mail account is not receiving any incoming mail. Please help!

I just updated to Maverick and now my .mac mail account is not receiving any incoming mail. Please help!

Try going to Mail/Preferences/Accounts/iCloud/Advanced and setting Authentication to Apple Token.

How to set CSRF token to make a POST call via Destinations in HANA XS

I have a requirement where I would want to make a POST call to Gateway Service,which would need a CSRF token.
I fetch the CSRF token and then I use the same token during POST.
Hence i set this in $.request.headers() .
I know that I have to set the cookie as well for CSRF so I set the headers as
req.headers.set("Cookie","'sap-XSRF_GIQ_100=TQRYJKzJSH8SknthcwRQFA%3d%3d20140425093233hxBe2w9qL9AjCtnh3gsIvPP6-IwsfZB2lqE5RtfGH8A%3d'")
But this fails with CSRF token validation
I found that the cookie value is not set in the service.
How are cookies handled in Hana how can i set my csrf and XSRF-Token cookie value in the request
Thanks,

Here is example code where I do this very thing - get the CSRF token for an ABAP/Gateway service and use it in the request. The CSRF Token should be a header not a cookie.
var dest = $.net.http.readDestination("WileECoyoteABAP.services", "ZWILEECOYOTE_SRV");
var client = new $.net.http.Client();
//Get CSRF Token
var CSRF = getCSRFToken(dest, client);
//Make Request
var req = new $.web.WebRequest($.net.http.POST, 'ACMEItemCollection/');
req.headers.set("x-csrf-token",CSRF);
req.headers.set("Content-Type","application/json");
req.setBody('{"d": {"ItemId": "9999999999","Item": "'+Items.Details[0].ITEM+'"}}');
client.request(req, dest);
var response = client.getResponse();
function getCSRFToken(dest, client){
var req = new $.web.WebRequest($.net.http.GET, 'ACMEItemCollection/?$top=1&$format=json');
req.headers.set("x-csrf-token", "fetch");
client.request(req, dest);
var response = client.getResponse();
var CSRF = response.headers.get("x-csrf-token");
if(response.status===200){}
else{
handleErrors(response);
return CSRF;

Aironet 1600 - A response was not received from the router or access point

Hi,
I'm trying to set up a wireless network with multiple SSID's. The new network only has CISCO products (router, switches). For the moment I'm trying to connect to 1 SSID (Windekind.Gast). the SSID is visible but when connecting devices have te folowing error message in the log:
Connection status summary
Connection started at: 2015-02-17 09:55:49-951
Profile match: Success
Pre-Association: Success
Association: Fail
Security and Authentication: Not started
Root cause:
Wireless association to "Windekind.Gast" failed
A response was not received from the router or access point.
Detailed root cause:
Wireless association to this network failed. Windows did not receive any response from the wireless router or accesspoint.
The signal is perfect (I'm only a few feet away from the AP).
To make sure there is no dhcp problem I tested the swich port in access mode for vlan 30 which supplied an IP correctly. I'm really not seeing the problem and searched the web for days now! Any help would be very much appreciated!
Below the config of the access point (done via de web interface).
! Last configuration change at 05:30:28 UTC Mon Mar 1 1993
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone
service password-encryption
hostname AP002-C
logging rate-limit console 9
enable secret 5 $1$Bxv3$Of8o5..8v6gzIiAe2tXlh/
no aaa new-model
no ip cef
dot11 syslog
dot11 vlan-name Windekind.Directie vlan 50
dot11 vlan-name Windekind.Gast vlan 30
dot11 vlan-name Windekind.Klasnet vlan 40
dot11 ssid Windekind.Directie
vlan 50
band-select
authentication open
mobility network-id 50
dot11 ssid Windekind.Gast
vlan 30
band-select
authentication open
authentication key-management wpa version 2
mbssid guest-mode
mobility network-id 30
wpa-psk ascii 7 14201B05080121222A2C6A6D63
dot11 ssid Windekind.Klasnet
vlan 40
band-select
mobility network-id 40
crypto pki token default removal timeout 0
username Cisco password 7 112A1016141D
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 30 mode ciphers aes-ccm tkip
ssid Windekind.Directie
ssid Windekind.Gast
ssid Windekind.Klasnet
antenna gain 2
stbc
beamform ofdm
mbssid
speed basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel 2452
no preamble-short
station-role root
payload-encapsulation dot1h
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 spanning-disabled
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
interface Dot11Radio0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 spanning-disabled
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
interface Dot11Radio0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 spanning-disabled
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
interface Dot11Radio1
no ip address
no ip route-cache
encryption vlan 30 mode ciphers aes-ccm tkip
ssid Windekind.Directie
ssid Windekind.Gast
ssid Windekind.Klasnet
antenna gain 4
no dfs band block
stbc
beamform ofdm
mbssid
speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel dfs
station-role root
payload-encapsulation dot1h
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 spanning-disabled
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
interface Dot11Radio1.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 spanning-disabled
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
interface Dot11Radio1.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 spanning-disabled
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 spanning-disabled
no bridge-group 30 source-learning
interface GigabitEthernet0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 spanning-disabled
no bridge-group 40 source-learning
interface GigabitEthernet0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 spanning-disabled
no bridge-group 50 source-learning
interface BVI1
ip address 10.0.0.81 255.255.255.0
no ip route-cache
ip default-gateway 10.0.0.1
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
logging facility user
bridge 1 route ip
line con 0
line vty 0 4
login local
transport input all
end

Hi Rasika
thanks for the reply! 10.0.0.81 belongs to vlan 1. I changed the config as suggested but no luck.. (same problems are logged in the event viewer). the ap is connected to a switchport in trunk mode and vlan 1 is the native lan (untagged). the port also is joined to vlan 30 (and others).
Below the new config. Hope you can see an error..
! Last configuration change at 22:56:10 UTC Thu Apr 1 1993
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone
service password-encryption
hostname AP002-C
logging rate-limit console 9
enable secret 5 $1$Bxv3$Of8o5..8v6gzIiAe2tXlh/
no aaa new-model
no ip cef
dot11 syslog
dot11 vlan-name Default vlan 1
dot11 vlan-name Windekind.Directie vlan 50
dot11 vlan-name Windekind.Gast vlan 30
dot11 vlan-name Windekind.Klasnet vlan 40
dot11 ssid Windekind.Directie
   vlan 50
   band-select
   authentication open
   mobility network-id 50
dot11 ssid Windekind.Gast
   vlan 30
   band-select
   authentication open
   authentication key-management wpa version 2
   mbssid guest-mode
   mobility network-id 30
   wpa-psk ascii 7 14201B05080121222A2C6A6D63
dot11 ssid Windekind.Klasnet
   vlan 40
   band-select
   mobility network-id 40
crypto pki token default removal timeout 0
username Cisco password 7 112A1016141D
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 30 mode ciphers aes-ccm tkip
ssid Windekind.Directie
ssid Windekind.Gast
ssid Windekind.Klasnet
antenna gain 2
stbc
beamform ofdm
mbssid
speed basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
no preamble-short
channel 2452
station-role root
payload-encapsulation dot1h
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 spanning-disabled
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
interface Dot11Radio0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 spanning-disabled
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
interface Dot11Radio0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 spanning-disabled
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
interface Dot11Radio1
no ip address
no ip route-cache
encryption vlan 30 mode ciphers aes-ccm tkip
ssid Windekind.Directie
ssid Windekind.Gast
ssid Windekind.Klasnet
antenna gain 4
no dfs band block
stbc
beamform ofdm
mbssid
speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel dfs
station-role root
payload-encapsulation dot1h
interface Dot11Radio1.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 spanning-disabled
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
interface Dot11Radio1.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 spanning-disabled
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
interface Dot11Radio1.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 spanning-disabled
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 spanning-disabled
no bridge-group 30 source-learning
interface GigabitEthernet0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 spanning-disabled
no bridge-group 40 source-learning
interface GigabitEthernet0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 spanning-disabled
no bridge-group 50 source-learning
interface BVI1
ip address 10.0.0.81 255.255.255.0
no ip route-cache
ip default-gateway 10.0.0.1
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
logging facility user
bridge 1 route ip
line con 0
line vty 0 4
login local
transport input all
end
t

Not receiving Push Notifications in iOS App

We have recently developed an app which uses Push notifications service. We are facing the issue that the Push is working inconsistently, two days back we had received the Push notification but later when we tried we dint get anything and for the past two days we are not receiving any Push notification. We have checked out our PHP script, recreated the certificates tried using Hard Coded Device Tokens and even from the server. But nothing seems to work and the worse is that we get a success from the Apple server yet nothing comes on the device. We are just unable to fix this issue. Can someone pls help its very urgent.

Yes, I've noticed this also.
Not on my iPhone 5 running iOS 8, but after activating my iPhone 6 and restoring backup.

Trying to create a Mozilla Persona account, but I'm not receiving the confirm credentials e-mail after three tries. Help?

I'm trying to create a persona account for: (Email removed by mod) but when I try to sign up after I've entered my e-mail and new password, I do not receive my confirmation e-mail (after repeated attempts).

The original url you gave me was: http://www.mozilla.org/en-US/persona/ which is in the first screenshot I provided. If I am in the totally wrong place, it is because that is where I was recommended to go.
I cannot login with my email and password, for as I stated in the beginning, I'm not receiving the confirmation email message that validates my email address in order to create a Persona account.

Can not receive data 10054

My version of Essbase is 6.5.1.4. On the server machine it self when I am adding members to outline I get "Can not receive data 10054". To resolve this problem I tried to increase the server page file size but the problem persist.Does anyone know a solution to this problem?SAK

How exactly are you retrieving data; is it smartview, excel addin, forms, reports etc ?

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

I cannot send MMS from an iphone 5 - some people it works others do not receive it. MMS is turned on and i have tried to reset phone etc - still same problem.

I cannot send MMS from an iphone 5 - some people it works others do not receive it. MMS is turned on and i have tried to reset phone etc - still same problem.

Are the messages successfully sent?
If so, what happens to a message after it is successfully sent has nothing to do with the cell phone that sent the message.

Outbound IDOC not received at the receiver system.

Hi,
Im sending an IDOC from sap to a non-sap system. During this process, from sap system it is executing successfully without any erros and the status is also '03' .
The problem is that the other system is unable to receive the IDOC sent from SAP system.
The connection is like TCP/IP and the registered server program is given as 'PROGRID' in RFC destination.
I would like to know what would be the possible cases where this IDOC is not received at the receiver system.
The configuration is perfect as per my knowledge. Just want to confirm one thing 'do i need to include any message type such as "SYNCH".
Awaiting for your solutions.
Thanks
rohith

Hi,
If the IDOC is sent successfully from the sender system then the status of the IDOC will be '03' , no matter whether the receiver has received the IDOC or not.
As per your case,
Check the Partner Profile parameters , whether the basic and extended message types are used properly.
The message type Synchron (Sync) is generally needed in Inbound IDOC side. Check whether you have added SYNCH or not.
Hope this Helps.
Regards,
Abhinab Mishra.
Experience is the name everyone gives to their mistakes.

Data not received in PSA Table

hi guyz,
im facing the below issue while loading master data attr from source system to bi system.
im loading data from 0vendor_attr to ovendor object.
only half of the records are processed and gets hanged.
in monitor- administrator workbench its showing (60434 from 157912 records)
below are the details of the issue:
Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BI, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump.
please guide with your expertise.
cheerz,
raps.

Hi Rajeev,
Check the job in Background (SM37), you can analyze from here.
Check the short dump in ST22.and check system performance once.
If you are facing this problem first time, cancel the background job and make the request red.
Then repeat the IP again, it will get successful.
This should be due to performance issue or RFC problem of your system.
If the job is active in SM37, cancel the job and make the status IP red.
Re run the IP, it will get successful.
Regards,
Venkatesh
Edited by: Venky1903 on Aug 15, 2011 2:09 AM

Data not received in Data target

Hi,
I have got the following message on the monitor after I ran an infopackage. I am running an infopackage that loads data from ODS1(Datasource) to ODS2. While I ran the infopackage I have got this message.
"Data not received in InfoCube / PSA object / InfoObject
Diagnosis
Data has not been updated in InfoCube / PSA object / InfoObject . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
The status is yellow. After the predifined time it turns into red. On the left hand side of the monitor it shows time and (0 records from 675). I have checked ST22 and there are no short dumps.
This is all happening at the processing step 'Service API'. Any thoughtfull idea are appreciated with points.

Hi,
I have created new infopackage and ran. Now the following message I have got on the monitor.
"Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
Any more thoughts?
Thanks,
Rao.

CSRF Token not received - XSODATA

Similar Messages

Maybe you are looking for