Css 11500 Error

Hi all,
I´ve search for this error but not found it anywhere.
This is ssh related.
Could u help me please ?
<em>
SSHD-0: Read from socket failed: errno = 0x36</em>
Best Regards,
Bruno Petronio

Hi Bruno,
If your software supports an encrypted access protocol such as SSH, Cisco recommends that you enable only that protocol and disable Telnet access when you want to use the SSH server. In order to enable the SSH Daemon (SSHD), you need an SSHD server license, which enables SSHD functionality on both the Standard and Enhanced versions of CSS software. Issue the sshd commands.
SSH version 1 support started in 4.01. SSH version 2 support started in 5.20.
Can you send me the output of
# sh ver
# show sshd version
# show sshd config
All your questions are answered in the following documents :
"Configuring CSS Remote Access Methods"
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11500series/v7.20/configuration/administration/guide/Access.html#wp1105322
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11500series/v7.30/command/reference/CmdGlobC.html#wp1108716
If you see any problems I'd appreciate being pointed in the right direction.
Best Regards,
Sachin Garg

Similar Messages

Firefox pops up an error message on certain pages, all other browsers work fine, how can I make firefox ignore the "error" [e2219] css init error: ReferenceError: g is not defined

Basically I want to replace the Ajax Control Toolkit Slider in favor of the Component One Studio for iPhone Slider for better mobile/desktop consistency (the ajax slider doesn't work well with iPhone). I created a simple page that works on every browser and platform (iPhone, Android, Mac, Windows) except Firefox, which fails on every platform. I have already tried disabling all plugins (safe mode) and clearing cache, I have also tried this with different versions of Firefox on different platforms. I posted this error on the Component One forum but since this only occurs with Firefox I believe this is a Firefox issue.
I searched for this error on the forums and Google but didn’t get any results:
''[e2219] css init error: ReferenceError: g is not defined''
The console has this message:
''[12:05:26.954] uncaught exception: [Exception... "prompt aborted by user" nsresult: "0x80040111 (NS_ERROR_NOT_AVAILABLE)" location: "JS frame :: resource:///components/nsPrompter.js :: openTabPrompt :: line 462" data: no]''
You can see the error by visiting http://www.componentone.com/i/
Visit the same URL with IE, Chrome or Safari and there is no error. If I click [OK] the page loads normally enough for me. Is there some JavaScript or CSS line I can put in the page to make Firefox ignore the error? If so that would be great because even if there is a fix put into Firefox itself there will be those millions of users out there that will not upgrade.

A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the MozillaZine forum site in order to post at that forum.

Services with different IP address subnets over CSS 11500 series

Hi all folks!
I have two CSS 11500 series...
In just a few months i will have ready a DRS (Disaster Recovery Site), where i will have 2 more servers to add to the environment.
But this servers will be in a different subnet from that today i have for the servers who are configured in the current services of my CSS.
So then the doubt i arises is:
Is correct to add two new services with these servers, but using the IP addressing of the DRS site???, and including on the CSS a static route to this network, (of the DRS) in order to reach them?? is it correct, it will work well?
This would be so....
             ________________LAN to LAN_____________________
             |                                                                                |
             |                                                                                |
|------SITE A------|                                                        |------SITE B------|
     [Firewall] ===============IPSEC============= [Firewall]
           |                                                                                |
           |                                                                                |
[CSS-A]-[CSS-B]                                                            [SWITCH]
       |          |                                                                     |         |
     [SWITCH]                                                                    |         |
[srvA] [srvB] [srvC]                                                          [srvD] [srvE]
So, at [CSS-A] & B, i will put a static route to firewall that know the subnet of site B through the IPSEC tunnel.
So In the CSSs, i will add the new services for the Servers "D" & "E" with the IP address of Site B.
This should be seen as well:
!*************************** GLOBAL ***************************
ip route 0.0.0.0 0.0.0.0 [IP FIREWALL]
ip route SITE B [IP FIREWALL]
!************************** SERVICE **************************
service srvA
ip address A.A.A.x
port 8080
service srvB
ip address A.A.A.x+1
port 8080
service srvC
ip address A.A.A.x+2
port 8080
service srvD
ip address B.B.B.y
port 8080
service srvE
ip address B.B.B.y+1
port 8080
I know that this practice is not the most desirable, in fact should use"Basic Global Server Load Balancing Site Redundancy Using the CSS with DNS", but I don't have much time to change the entire environment today, and in this first stage i have to begin with this poor but quick solution that i thought and i wanted to be validated if there is posibliidades this to work
Within their experiences that they say? Will operate?
Thanks in advance!
Regards!
Esteban =)

Daniel!
Sorry by delay!
Thank you so much for you time for reply.
You have given me a great help to this doubt!
But..using "source group" let me know..
I can´t undertand the really difference between NAT with ACls as you can see at this link: (http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_tech_note09186a0080093dfc.shtml)
and
this other link, using NAT (from the piont 5), (http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a0080093dff.shtml)
where the NAT is configured under a method different from the previous one..
So.. for this scenario described above, which would you recommend using? I would think that the second is the most indicated truth? What do you think?
Thanks in advance again!!!
Have nice day!
Regards.
Esteban.

What is the appropriate product name for CSS 11500 on Bug Toolkit

Today I tried to search DDTs of CSS 11500 on Bug Toolkit (http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl), however I can not find out appropriate product name corresponding to CSS 11500.
Before I had searched DDTs of CSS 11500 on Bug Toolkit many times, at that time, if my memory correct..
I selected "Cisco CSS 11500 Series Content Services Switches" in the list of "Search for bugs in other Cisco software and hardware products" on Bug Toolkit.
But I can not find this product name today.
Do you know what product name appropriate for CSS 11500 on Bug Toolkit ?
Your information would be appreciated.
Best regards,

Hi Gilles,
Thank you for your cooperation.
Today, I can find the CSS at "new Bug Toolkit".
http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
Select Product Category: Application Networking Services
Select Product: Cisco CSS 11000 Series Content Services
So I understand I should go "new Bug Toolkit" instead of old "Bug Toolkit" to
search any DDTs for CSS 11500.
Many thanks.
Best regards,

Multihoming with CSS 11500?

Can I do load balancing between two internet ISP's (multihoming), from Internet to Web Server (inside traffic) and from Internal network to Internet (outside traffic) with a Cisco CSS 11500?

you can connect the CSS to multiple ISP.
With the ECMP feature, the CSS will forward the response back to where the connection came from.
However, for outgoing connection, the CSS can't do loadbalancing over multiple ISP.
Regards,
Gilles.

Load balancing PPTP (Windows 2003) behind CSS 11500

I am wondering if you can load balance PPTP service (TCP port 1723 and GRE) behind CSS 11500, please let me know if anyone as experience with this setup.
Irfan
[email protected]

No. I dont think you can load balance PPTP service behind CSS 11500.

Sorry Server for CSS 11500

Hi,
I have a question regarding sorry server configuration on the CSS 11500 series.
Is there a way for the sorry server to ignore the URL path and always send the user traffic to the "root" page (e.g. index.html) of the sorry server web server?
The problem I have is the redirection of the "root" page (url "/") that is configured for the normal traffic is causing the sorry page not to work since the URL path ("/psp/CUSTOMER1/?cmd=login") does not exist on the sorry page web server:
service Sorry-Server
protocol tcp
port 8000
keepalive type tcp
ip address 192.168.2.254
active
service server1
ip address 192.168.2.101
protocol tcp
keepalive type tcp
port 8080
active
service server2
ip address 192.168.2.102
protocol tcp
keepalive type tcp
port 8080
active
owner Customer1
content Content1
    vip address 192.168.1.101
    port 80
    protocol tcp
    url "/*"
    balance aca
    advanced-balance arrowpoint-cookie
    flow-timeout-multiplier 6
    add service server1
    add service server2
    primarySorryServer Sorry-Server
    active
content Content1-Redirect
    redirect "/psp/CUSTOMER1/?cmd=login"
    vip address 192.168.1.101
    port 80
    protocol tcp
    url "/"
    active
Thanks in advance for your help!
Best regards,
Harry

Hi again,
During a maintenance window I made the following change and that made things a bit better:
service Sorry-Server
type redirect
keepalive type none
redirect-string "192.168.2.254:8000"
active
However, since the redirect string points to a private address, Internet users are not able to access the URL.
As a work-around I sent the redirect to a new content rule with a public address and then configured a second sorry page server:
service Sorry-Server
type redirect
keepalive type none
redirect-string "sorry.example.com:8000"
active
service Sorry-Server-2
ip address 192.168.2.254
protocol tcp
port 8000
keepalive type tcp
active
owner Customer1
content Content2
    vip address x.x.x.x
    add service Sorry-Server-2
    port 8000
    protocol tcp
    active
Is there a better way to do this?
Best regards,
Harry

Cisco CSS 11500 and RDP

Dear NetPros:
Does anyone know that does Cisco CSS 11500 Series Content Services Switch support 'Session Caching of RDP Clients? session for roaming of disconnected sessions' features?
Thanks
Bernard

The Cisco CSS 11500 is a compact modular platform, specifically designed to provide robust Layer 4-7 traffic management services for e-business applications in Internet and intranet data centers.
This URl should help you:
http://www.cisco.com/en/US/netsol/ns340/ns394/ns50/ns254/networking_solutions_package.html

CSS 11500 - Change name device

Hi,
I need to change the device name (hostname) of my CSS 11500. How I can do that? I'm searching since some hours without result.

to avoid having to retype the name after each reboot, you have to do a save_profile.
Gilles.

CSS 5 error 20 on Window 7

I have restarted, updated, tool cleaned, and I still get the same error with CSS 5 error 20 on Window 7

Have you tried http://forums.adobe.com/thread/634413?

CSS Validation Errors

We have converted a coded script which has passed the html5 validation and wil be used in MUSE..
However the following errors during the CSS validation errors have arisen.
-1         File not found: import file://localhost/StyleSheets/ModuleStyleSheets.css: Operation not permitted
URI : TextArea
-1         File not found: import file://localhost/css/site_global.css?3941554732: Operation not permitted
URI : TextArea
-1         File not found: import file://localhost/css/complimentary-downloads.css?60443333: Operation not permitted
URI : TextArea
-1         File not found: import file://localhost/css/site.css: Operation not permitted
I think the files are not loading, would appreciate a direction or assistance, many thanks

For Muse to produce the code that works on all browsers, proprietary CSS properties are needed. Until all browsers follow exactly the CSS standard and do not use their proprietary properties, we won't be able to avoid this.
On the other hand, we try our best for the HTML code to be successfully validated.

CSS 11500 url path rewrite and NAT

Hi,
We are evaluating a CSS 11500 and try to configure url path rewrite and NAT, but we have some problems.
What we would like to do is the following:
http://www.example.com/path1 -> http://host1:80
http://www.example.com/path2 -> http://host1:8080
http://www.example.com/path3 -> http://host2:80
The address www.example.com is resolving to a valid internet address, whereas host1 and host2 resolves to private IP addresses.
The client should always see the external url (e.g. http://www.example.com/path1/...) and the CSS should do the necessary translation.
Any help would be very much appreciated!
Regards,
Harald

Hello Experts, I'm new with this cisco stuff too(just got it 3 weeks ago), but here is some of my experience with cisco css 11501.
First : Service ServerName, there is a port setting here, but from my experience, I think it is related with KeepAlive option, so, port is alternate way to know if the server alive or not.
Second : When you send request to cisco css, the port option in content port will be the cisco css port to accept request, so, if you send a request to http://vip:8080/, all service must be in the same port too to balance the request, in this case, port 8080, if one service port 80, i'm sure the css will not hit the server.
Third : To solve your problem...
http://www.example.com/path1 -> http://host1:80 (ipA)
http://www.example.com/path2 -> http://host1:80 (ipB)
http://www.example.com/path3 -> http://host2:80
if you are lazy to buy new nic, just set subinterface/ip alias on the host1, and make the webserver only bind to specific address, not to all interface...
O yea, about your path1/path2/path3 -> /, hmm, i'm still asking in this forum about path changing cause until now, i haven't know how to do this, i know about apache rewrite module, and success do this, if only i know about this in cisco css too :-(
I'm sorry if I make mistake, I'm just telling my experience...

Do CSS 11500 series allow remote SPAN?

Hi,
I found SPAN (Switch port analyzer) is available on CSS 11500 series, but could only found destination must be local. Is it possible to do remote SPAN and make the destination be in another remote switch?
And how many local span sessions are allowed?
Thanks,
Rgds
Jorge

Cisco WebNS Software Version 7.20 delivers support for a new Cisco CSS 11501 model and Cisco WebNS Software 7.20 supports SPAN the features.
Switched Port Analyzer (SPAN) or port mirroring is useful for network analysis?a copy of the packets received or transmitted by a source port is sent to a designated destination port.
Kindly go through these links to get detailed information:
http://www.provantage.com/cisco-systems-css11503-ac~7CSCO288.htm
http://www.cisco.com/en/US/products/hw/contnetw/ps792/prod_release_note09186a008077c440

CSS 11500 Series Query

Hi
I have 2 CSS 11500 series units working in a master / slave configuration.
Both units are identical in regards to hardware, IOS, etc.
1 unit allows the running config to be saved by the ' copy run start' command where the other goes through the motions of saving, but a 'show startup-config' shows nothing.
This unit seems to be operational in every other regard. Is this a hardware fault or am I missing a software command somewhere along the way ?
Thanks
Ian

You get such problems when the device is running short of memory. Try increasing the DRAM because what is happening is that the device saves the config in the NVRAM but it does not have enough DRAM to display the configuration when the "sh startup-config" command is executed. A temporary solution is to restart the device, if the problem persists then you have to upgrade the memory.

CSS 11500 Certificate Signing Request (CSR)

Would any of you know if and how to configure / general a wildcard or multi-domain SSL certificate on a CSS 11500 appliance? The "SSL gencsr ..." command doesn't seem to allow me to add more than one domain name during the information gathering.
Any help or input would be greatly appreciated.
Thanks,

WildCard certs are supported on CSS.
The only thing that makes it a CSR for a wildcard certificate would be that the common name would be something like "*.yourdomain.com".
Since a wildcard certificate represents multiple domains, it can be re-used on the
multiple https content rules of different IPs.
The CSR procedure for a wildcard certificate on the CSS is not different than the CSR
procedure for a regular certificate (You just need to put something like "*.yourdomain.com" in front of common name):
CSS11506(config)# ssl gencsr app1key
Country Name (2 letter code) [US]US
State or Province (full name) [SomeState]CA
Locality Name (city) [SomeCity]San Jose
Organization Name (company name) [Acme Inc]Yourdomain Inc.
Organizational Unit Name (section) [Web Administration]SSL Admin
Common Name (your domain name) [www.acme.com]*.yourdomain.com
Syed

Css 11500 Error

Similar Messages

Maybe you are looking for