CSS 80 to 443 redirect with wildcard

Hello,
I am doing a 80 to 443 redirect on a 11503 CSS and would like to know if I can do a "wildcard" redirect for after the / ? For example:
I currently have this
content test-redirect
    vip address 10.10.10.10
    redirect "https://test.domain.com"
    protocol tcp
    port 80
    url "/*"
    active
Can I use this?
content test-redirect
    vip address 10.10.10.10
    redirect "https://test.domain.com/*" <- use the wildcard *
    protocol tcp
    port 80
    url "/*"
    active
Thanks,
Dave

Adding the asterisk, would not do what you want.
The CSS is not going to replace the asterisk with the path introduced by the user.
Here are all the methods to do a redirect on the css.
http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a00801de8d6.shtml
Try to use the solution with the domain command.
This should only replace the domain and leave the path unchanged.
Gilles.

Similar Messages

Performing redirects with a CSS

Hello,
I have a CSS performing load balancing between some servers on port 443 (SSL). Since some clients try to connect to the VIP using port 80 (hhtp), Im trying to find a solution on the CSS to send a redirect to the client in order that this one connects to the VIP using port 443.
Is it possible to do it on the CSS?
Thanks in advance for your help.
Regards.
Alex

Alex,
configure a content rule with the vip address and port 80.
config a service with type redirect, redirect-string https://www.yoursite.com and no prepend http.
add the redirect service to the content rule and thats it!

FTP - FCC - GUILDFTPd - Unable to pick up multiple files with Wildcard char

Hi All,
I am not sure if my issue is strange or i may be missing something here. I am using FTP - FCC and using GUILDFTPd to connect to my local machine. This is working perfect if i don't use wildcard characters in file name but if i use them it is not picking up files. I have green in Channel monitoring and polling as mentioned for every 60 Seconds.
I have tried both using/without using 'Advanced selection for source file' and also checked 'Adapter specific message attributes'. The same is working if i specify exact file name. By the way, i have tried using '*' and '?' as wildcard character.
Any idea or help in this regard is appreciated.

I have tried with just basic. I mean, it works fine if i specify exact file name. The problem is only when i want to pick up multiple files using any wildcard character. No error in communication channel or in archive settings as the scenario working for one file without any wildcard.
However, i have changed to NFS and it is working good even with wildcard characters.
It seems there is a problem with GUILDFTPd which is not picking up files but no errror.
Any ideas are welcome. Thank you both for the responses.

Incorrect warning for import directive with wildcard

Some (all?) imports with wildcards seem to be getting incorrect warnings. For example, if I do:
import flash.events.*
I get a warning "The import flash.events.*" is not used locally, which is not true, since I am using ProgressEvent, IOErrorEvent, SecurityErrorEvent, etc. in the same file. This did not happen in FB 4.6.

I created an account on the bugs site and no amount of searching (or using the direct link) will reveal this 'bug' entity.
I too am having a similar difficulty (at least I think it is), though no wildcard character is involved.
In FB7 I have a Mobile Project created fresh after installing FB7. The main application MXML type was selected within the wizard when creating the project, and that type was TabbedViewNavigatorApplication. I created a directory under the 'src' directory by the name of 'skins' and started a fresh .as file. As quoted. (actually, I'm going to post a screenshot as I'm incredulous that even in advanced editing mode, that a forum -> on programming and development <- seems to have no obvious way to insert formatted code and indeed ignores such tags when added in the HTML view of the editor If that functionality is there, it's -far- from obvious or intiutive. )

Multiple selection with wildcard in WAD

Hello,
How can I do filtering with multiple selection with wildcard in WAD 7 ?
We have this problem in two seperate situation. The first is in the parameter screen where we want to filer the output with two wildcard. The first one we can put on the field and then go to the selection screen but what about the other ????. The second situation is in the report when we want to filter one of the columns with wildcard.
I will appreciate if someone will open my eyes about this.
Ilan

Hello,
you can use the * for wildcards in the BEx Web.
For example 37* -> 370000 up to 379999.
Buy,
André

DirectoryContext.search with WildCard "*" Fails in 64 Bit JRE

Hi all,
I'm using DirectoryContext.search with wildcard "*" filter. it works fine in 32 Bit JRE, but throws the following exception when I run the same in Solaris 64 Bit JRE.
Exception in thread "main" javax.naming.directory.InvalidSearchFilterException: invalid attribute description; remaining name 'ou=People,dc=mydomain,dc=com'
at com.sun.jndi.ldap.Filter.encodeSimpleFilter(Unknown Source)
at com.sun.jndi.ldap.Filter.encodeFilter(Unknown Source)
at com.sun.jndi.ldap.Filter.encodeFilterList(Unknown Source)
at com.sun.jndi.ldap.Filter.encodeComplexFilter(Unknown Source)
at com.sun.jndi.ldap.Filter.encodeFilter(Unknown Source)
at com.sun.jndi.ldap.Filter.encodeFilterString(Unknown Source)
at com.sun.jndi.ldap.LdapClient.search(Unknown Source)
at com.sun.jndi.ldap.LdapCtx.doSearch(Unknown Source)
at com.sun.jndi.ldap.LdapCtx.searchAux(Unknown Source)
at com.sun.jndi.ldap.LdapCtx.c_search(Unknown Source)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_search(Unknown Source)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(Unknown Source)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(Unknown Source)
at javax.naming.directory.InitialDirContext.search(Unknown Source)
Please help.
Thanks in advance,
Regards,
Kaja

When will Aobe Acrobat support Office 2010 64 bit and Windows 7 64 bit?

Hostname(with wildcards) based access-list or policy.

Is there any way in cisco to use hostnames with wildcards either in ACL, or Policy, class map etc, for example I want to identify following devices with one keyword..for blocking/permit etc
UKlondon001
UKlondon002
UKlondon003
Uklondon004
UKlondon005
I want to capture all these with wildcard UKlondon*
something like regular expressions...

You can group them in object-groups. You'll need to configure their names and then create an object group:
name 10.5.5.5 uklondon001
name 10.5.5.6 uklondon002
object-group network UKLONDONS
network-object host uklondon001
network-object host uklondon002
access-list permit tcp any object-group UKLONDONS eq 80
The above (from memory so don't quote me) will allow any traffic to hit any of those servers on port 80.
If you're wanting to do this for certain websites like youtube.com or google.com, you'll need to use regex and class-maps.
HTH,
John

Find/Change help with wildcard numbers...

hello... i'm looking for help with wildcards...
i have a specific task to complete.. i need to add dash & space into a space in a string of letters and characters...
here
221kbps - 00:28:34space dash space here47Mb - 44.1 kHz
198kbps - 01:27:43 41Mb - 44.1 kHz
215kbps - 00:34:52 156Mb - 44.1 kHz
225kbps - 00:32:14 54Mb - 48 kHz
so my finished text will look like this
221kbps - 00:28:34 - 47Mb - 44.1 kHz
198kbps - 01:27:43 - 41Mb - 44.1 kHz
215kbps - 00:34:52 - 156Mb - 44.1 kHz
225kbps - 00:32:14 - 54Mb - 48 kHz
there are many variables to the text - but i thought perhaps i could create a wildcard digit find/change based on the Mb bit, replacing the single space with space dash space
BUT
i need to retain the numbers before the Mb
so my question - is it possible to RETAIN WILDCARD NUMBERS?
merci beaucoup!

omg... just fell of my chair
tried it in text - no joy...
tried it as a grep.
YES YES YES
thankyou so much - i have about 18,000 to format for a music website...
www.littledogdiscs.co.uk
if you ever find your way to our neck of the woods in the South of France - please do visit my b&b
www.maisonverdigris.com
i have a bottle of vintage champagne with your name on it...
thanks
teresa

SQL Performance tuning with wildcard Like condition

Hi,
I have performance issue with SQL query.
When I am using "where emp_name like '%im%' " query is taking longer time than when I use "where emp_name like 'im%' " .
With former condition query takes 40 sec , with later it takes around 1.5 sec.
Both returns almost same no. of rows. We have function based index created on emp_name column.
With wildcard at both ends query goes for full table scan.
Can any one please suggest way so that query responce time can be reduced.?
I even tried using hints but still it is going for full table scan instead of using index.

>
Hi Mandark,
<I've rearranged your post>
When I am using "where emp_name like '%im%' " query is taking longer time than when I use "where emp_name like 'im%' " .
With wildcard at both ends query goes for full table scan.
I even tried using hints but still it is going for full table scan instead of using index.
With former condition query takes 40 sec , with later it takes around 1.5 sec.
Both returns almost same no. of rows. We have function based index created on emp_name column.You are never going to be able to speed things up with a double wild card - or even 1 wild card at the beginning
(unless you have some weird index reversing the string).
With the double wild-card, the system has to search through the string character by character to see
if there are any letter "i's" and then see if that letter is followed by an "m".
That's using your standard B-tree index (see below).
Can any one please suggest way so that query responce time can be reduced.?Yes, I think so - there is full-text indexing - see here:
http://www.dba-oracle.com/oracle_tips_like_sql_index.htm and
http://www.oracle-base.com/articles/9i/full-text-indexing-using-oracle-text-9i.php
AFAIK, it's an extra-cost option - but you can have fun finding out all that for yourself ;)
HTH,
Paul...

Fix for SOLR searches beginning with wildcard?

All, I am having problems finding clear answers on if the above was corrected in ColdFusion 10.
I can't get my head around the idea of SOLR not allowing search criteria to begin with a wildcard. I've seen a solution for reverse wildcard searching, which is great as long as I specify criteria for which I know the ending letters. For example, if I am looking for all entries ending in "ing", I could do a search on "*ing", using the reverse wildcard to find "gni*". I have yet to see, or come up with, a solution for a SOLR search with wildcards in the start and end of the criteria. For example, lets say I am looking for any word with "fus" in the middle, such as "confusing" or "perfusing" or "profusely". I would want to do a search such as "*fus*". From what I understand thus far, this cannot be done in SOLR?
Thanks,
Tom

ColdFusion will support whatever Apache solr supports as it is the underlying engine we are using.
And Solr does support it: http://lucene.apache.org/solr/api/org/apache/solr/analysis/ReversedWildcardFilterFactory.h tml
I think this is an egregious hack, but still, it's the way they've chosen to support it.
Solr technically disables support of leading wildcards by default in the traditional query parsers due to concerns about query performance since it tends to select a large percentage of indexed terms.
Be that as it may, this should be my decision, as the maintainer of the index, not your decision to blanketly disallow it. If it's available, then one can use it if one choses, or not use it for the reasons you cite. If you blanketly disallow it, you're removing the ability for me to make that decision.
It's also a bit of a backwards compat issue, innit? Verity allowed leading wildcards.
Adam

Learn Adobe Dreamweaver and CSS the faster, easier way- - WITH the expertise of an Adobe Certified

Learn Adobe Dreamweaver and CSS the faster, easier way… … WITH the expertise of an Adobe Certified Instructor … WITHOUT the inconvenience (and expense) of classroom training! Monthly Commissions $$- Learn Adobe Dreamweaver Videos With Help Desk! Sell Once, Make Money Every Month!! Nationwide Speaker & Author Of 4 Books, Brian Wood's Learning System Is By Far The Best Way To Learn How To Build Websites Using Adobe's Dreamweaver Program- With Help Desk - Never Get "stuck" Again. Incredible Reviews!

There is no global option for this.
Mylenium

URL problems with SQL Server Reporting Services 2012 with wildcard SSL certificate

Hi,
I have single server, domain member, with SQL Server 2012 SP1 Reporting Services.
I am trying to get work with url: https://reports.mydomain.com
I have valid wildcard certificate (*.mydomain.com) implemented and configured URLs in Configuration Manager.
https://reports.mydomain.com/ReportServer - works fine
https://reports.3pro.hr/Reports/ - I got error:
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
In rsreportserver.config I have:
<Add Key="SecureConnectionLevel" Value="2"/>
When looking my ReportServerService_date.log file I have something like:
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server internal url https://localhost:443/ReportServer.
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server external url https://serverhostname:443/ReportServer.
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using url root https://reports.mydomain.com/ReportServer.
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server internal url https://localhost:443/ReportServer.
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server external url https://serverhostname:443/ReportServer.
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using url root https://reports.mydomain.com/ReportServer.
Also, error shown in log file:
appdomainmanager!ReportManager_0-2!4c50!03/10/2013-20:24:53:: e ERROR: Remote certificate error RemoteCertificateNameMismatch encountered for url https://localhost/ReportServer/ReportService2010.asmx.
ui!ReportManager_0-2!4c50!03/10/2013-20:24:54:: e ERROR: System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException:
The remote certificate is invalid according to the validation procedure.
Btw, is there a way to delete/disable access using https://localhost and/or servername (not FQDN) since SSL will not work in this way for me, and I want access only by full url - https://reports.mydomain.com , not localhost ..
-- Hrvoje Kusulja

I spent one of my 4 free support incidents with Microsoft (part of MSDN subscription) this year to get this investigated. The tech support person helped me through several issues but had to leave to attend some training, and I got past the last hurdle
before she called me back. Here are the steps that resolved this issue for me. I know for sure that step 5 was necessary. Step 1 may not apply to you, and steps 2-4 may or may not have been necessary (they didn't immediately fix the issue,
but I didn't roll them back either so they may have been necessary.)
Step 1:
Ensure you are editing the correct rsreportserver.config file. I had been making changes to a file that was installed in C:\Program Files\Common Files\microsoft shared\Web Server Extensions\14\WebServices\Reporting, but that was a rsreportserver.config
file for some sharepoint integration that I'm not using. The correct path on my system was E:\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config, but yours may vary. If you can't figure it out, look in the registry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
SQL Server\MSRS11.MSSQLSERVER\Setup in the key named SQLPath, and then go to the ReportServer subdirectory of that path.
Step 2:
In rsreportserver.config, ensure that SecureConnectionLevel is set to the value 3. Was set to 0 in my configuration. Corrected line in your rsreportserver.confiog file should look like:
<Add Key="SecureConnectionLevel" Value="3"/>
Step 3:
In rsreportserver.config, add the correct value to the <URLRoot> element (which already exists in the file.) In my configuration, this value was blank. The value should be the fully qualified path to your report server, with a hostname that
is valid for your certificate. For example, if my cert matches *.mydomain.local:
<UrlRoot>
https://myserver.mydomain.local/ReportServer
</UrlRoot>
Step 4:
Ensure that your certificate exists in Trusted Root Certification Authorities in certmgr for the local machine. I had the certificate installed as a Personal certificate for the local machine, which I still think was correct (the certificate wasn't actually
the problem and worked correctly for Report Server, and the failure was caused by SSRS incorrectly making a https request to a localhost URL), but she had me remove the certificate from Personal and add it to Trusted Root Certificate Authorities. That
broke things and the cert was no longer listed as a cert I could bind to, so we then copied it so it existed in both Personal and Trusted Root Certificate Authorities. This is how I left it, not sure if that was necessary.
Step 5:
This was the fix that finally got things to work. In rsreportserver.config, add the same value to the <ReportServerUrl> element (which also already exists in the file) that you added in step 3. In my configuration, this value was also blank.
The corrected value should be the same as in step 3, for example:
<ReportServerUrl>
https://myserver.mydomain.local/ReportServer
</ReportServerUrl>
Then restart your report server (stop & then start in Report Server Configuration Manager), and the problem should go away. At least it did for me.
Good luck!

HTTP Redirect with Global Load Balancing

I've seen a lot of documentation about redirects and what I am trying to do seems simple enough yet I can't get it to work. Here is a summary:
We have two CSSs in different data centers with load balancing in a roundrobin fashion.
User types www.test.com:9086/test.html
User hits one of the CSSes configured to respond to www.test.com, CSS1 and CSS2.
If CSS1 gets the request, it should redirect request to server1:9086/test.html
If CSS2 gets the request, it should redirect request to server2:9086/test.html
Here is a sample of one of the CSSes:
content vTEST
dnsbalance roundrobin
add dns www.test.com
url "/*"
protocol tcp
port 9086
vip address 192.168.3.135
add service rTEST
active
service rTEST
protocol tcp
port 9086
type redirect
keepalive type none
ip address 2.2.2.2
redirect-string "server1:9086/test.html"
active
I've seen a lot of example of using HTTP Redirects, but none of them touch on using global load balancing as we are trying to accomplish.
Now, if I type in a browser:
http://www.test.com:9086/test.html
it fails. Why? because the CSS returns back an IP of 2.2.2.2 for www.test.com, which isn't a real IP address (this is by design). If I type:
http://192.168.3.135:9086/test.html
it works because it successfully redirects to:
http://server1:9086/test.html
because it is going directly against the VIP and redirecting as it should.
So the redirect function we know is working on the CSS as expected. However, the problem is this:
When I ping www.test.com I should get back the VIP address of the content rule (192.168.3.135) and I do UNTIL I ADD THE REDIRECT TYPE to the service. Once I do that if I ping www.test.com I will get back 2.2.2.2. Somehow once the redirect is added the IP address of the service (2.2.2.2) is returned instead of the content VIP (192.168.3.135). That shouldn't happen.
I hope this makes sense and any help would be greatly appreciated!!!

I think what you want to do is explained at :
http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a0080094068.shtml
For your information, you should also look at this solution :
http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a00801dcd75.shtml
Regards,
Gilles.

Service type redirect with long url

Hello,
I need to configure a content rule on CSS11501 with redirect services. However, I need to redirect to url's like this:
https://www.domain.com:4445/path1/path2/path3/path4/index.pl?username=USER&env=UAT&lang=ENG
Then I found that the redirect url cannot be longer than 64-byte.
How can I get this done? I cannot use the domain command or prepend-http command because I am redirecting to https. I think I must include the whole url including the "https://" part in the redirect string.
Moreover, is there anything the CSS can help with the attribute-value pairs in the URL?
CT Yau
Hong Kong

Here is a link to sample configs for the different ways to config redirect.
http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a00801de8d6.shtml
I think you need 'no prepend-http' and a redirect-string.
However, I also believe the url size is limited to 256 characters.
Give it a try so, as I'm not sure at 100% and have no devices to check right now.
Regards,
Gilles.

How do I edit the CSS of a Dynamic Menu with Dreamweaver and Business Catalyst.

I've watched tutorials on v2 menu module and it obviously was not made for someone just starting out in Business Catalyst. I want to edit the CSS of my Dynamic Module, preferably V1, but if I have to use version 2 I will. The problem I am running into is that the width of the menu I am trying to make is not big enough. The menu is extremely simple, I could whip it up with css and html in a matter of minutes. Just black words horizontal layout with a dark red hover color and selected state. I can change all that in Business Catalyst Site Manager just fine, however, the width of my menu when I look at it on the site, is way too small. Probably only 750px wide. I want it 1000px wide, but I haven't the faintest idea of where to find that information to change. When I add the menu module to my html code i get this: {module_menu,1534789}. How do I add or find css/html to edit the properties? I know I can add classes to the items inside the menu in the Site Manager, but where do I find the html code that shows those names?
I'm obviously missing something important and probably really easy, so I hope someone can help.
Thanks, Evan Schmidt

I went ahead and built the navigation without a module, easier than wasting all this time trying to figure it out.
But initially my main problem was when I add the Menu module to my html in dreamweaver, this: {module_menu,1534789} would be put in my html instead of css/html code. Now if publish my site and look at the page source, it shows the css/html, but it doesn't in dreamweaver. So is that the only way to edit the css/html code, copy the page source and replace the {module_menu,1534789} with the copied code in dreamweaver?

CSS 80 to 443 redirect with wildcard

Similar Messages

Maybe you are looking for