CSS buttons help
Hello,
I am so new at this but I created a button navigation bar using Dreamweaver CS4 and I created it using Spry. At first the menu spilled over to a second row and I played around with the CSS settings and finally got it to a single row but it doesn't fill the entire length of the row. I am also getting a gap between the banner and the body of my pages. grrr... How can I do this?
http://www.4-tacres.com
Thank You!
Have a look at this CSS Layout which is pretty close to what you're aiming for.
http://alt-web.com/TEMPLATES/2-column-fixed-width-template.shtml
Note: No tables required. Tables should be reserved for tabular data presentation such as charts & spreadsheets.
View source in browser to see the code.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
Similar Messages
-
Centering CSS-buttons - Help from CSS Guru wanted
Dear group,
I created a site for a friend in which I wanted to do all the
navigation
with CSS-rollover-buttons. Actually it works fine until I try
to center the
buttons. For the buttons, which are located in the
footer-section, there is
no problem, they center fine?!
So I thought to be clever by creating a container with the
same attributes
than the footer, in which I place the buttons. But to my
surprise it didn't
work. Trying to center the #wrapper didn't bring the wanted
result. The
navigation still stings to the left of the page.
Now I have set the width from the container to 40%. But this
is no solution
and looks messy:-(
Please have a look at:
http://www.stuck-atelier.de/Galerie/kueche3/e_page-0001.html
The CSS:
http://www.stuck-atelier.de/Library/fabryb.css
Any help is very much welcome:-)
Best regards
Inge Grotjahn, frustratedHi Murray,
Am 15.06.2006 schrieb Murray *ACE*:
> Your problem is not in the implementation of Anurak's
correct instructions,
> it's in the basic layout of the page. The div#wrapper is
given a width of
> 40%, which restricts div#navfoto1 from reaching its
desired location.
> Remove that width and see what happens when you change
your code to this -
>
> <div id="wrapper" style="width:100%;">
> <div id="navfoto1" style="width:200px;margin:0
auto;">
> <ul>
> <li><a href="e_index.html" title="internal
link: to the
> index">Index</a></li>
> <li><a href="e_page-0002.html" title="internal
link: to the next
> picture">Next</a></li>
> </ul>
> </div>
> </div>
thank you for your advice. I changed the CSS as follows:
#wrapper {
margin:0 auto;
width: 100%;
text-align:center;
#navfoto1 {
margin: 5px auto;
width: 300px;
and left the html as it was. The result is much better than
my solution,
but doesn't center the buttons:-( With a width of 200px, the
buttons (on
pages with 3 buttons) are no longer displayed inline:-( On
the German page
you can see better, that the buttons will not center (maybe
because the
button texts are longer). And on the photoindex-page you see
it the best.
Here the link to the English pages:
http://www.stuck-atelier.de/Galerie/kueche3/e_page-0003.html
The CSS:
http://www.stuck-atelier.de/Library/e_fabryb.css
http://www.stuck-atelier.de/Galerie/kueche3/e_index.html
The CSS:
http://www.stuck-atelier.de/Library/e_fabry.css
Here the link to the German pages:
http://www.stuck-atelier.de/Galerie/kueche3/page-0003.html
The CSS:
http://www.stuck-atelier.de/Library/fabryb.css
http://www.stuck-atelier.de/Galerie/kueche3/index.html
The CSS:
http://www.stuck-atelier.de/Library/fabry.css
I really don't understand what is going wrong here:-(
Best regards
Inge Grotjahn
CatManiacs World:
http://www.gwsystems.com/inge -
CSS Buttons in Blog Module Template Help
I am using css buttons for my social icons in my blog side bar. I have included the css stylesheet in the overall blog module template as well as well as the button text. The icons appear when I view the blog in list view, however when I try to view an individual post, the icons do not appear, just the button text. The buttons work on all other web pages within BC as well. Thanks for any help
Have you set the paths for your images and css as ... src="/images/" etc?
In BC CSS, JS, images etc need to start with a forward slash to say "read from root". -
Inserting CSS Buttons in Muse Site?
Is there a way to insert a CSS button like one that could be generated from this website into a Muse site that I'm creating?
http://www.cssbuttongenerator.com/
If not, is Muse capable of creating a similarly styled button?Hello,
In Widget Library section, you have a State Button widget in composition.
You can use that button and apply different states/effects to it and create a hyperlink to it.
Hope this helps.
Regards,
Sachin -
Doing my first web page and was trying out the CSS buttons in the widgets. Can't see where to set the property for the web link.
<a href="#" class="classname">my button</a>
-
CSS Button Links in HTML email not working in TB
Greetings,
Our company is creating an html email for customers and we are noticing the CSS button links don't work when viewing in Thunderbird 31 and 32 beta.
Does TB require unique coding to get these to work?
Any assistance would be appreciated...
-- PaulFrom the point of view of a user who views received email messages in Thunderbird, it doesn't support scripting. Straight links should work and and you can attach a link to an image.
Note that Thunderbird does NOT offer active links in the Compose window. So however you create it, you won't see it as the recipient does unless you save it and view it as a draft. -
How can i had CSS buttons i made with RAGE ButtonDesign to iweb?
good day to you
i have the RAGE ButtonDesign software that can make for me nice css buttons
after i made the button i get 3 files : index.html , rage_style.css and the a png file
how do i integrated this to my iweb site?You need to place html code that is produced into the html snippet on your website and click apply for any code to work on your site. An index.html page is no good to you, to be used in iWeb as iWeb has no import facility.
Take your html code and place it in an html snippet and see what happens. -
Right now, I'm stuck in the settings, when I press the sleep/wake button or the home button it doesnt let me. But is not frozen or any thing just the buttons. help me please!!!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Custom Design With Squares as Buttons - Help
This may be a simple task, the method however is just bypassing me ... can anyone help please?
I would like to design a page, with five interlocking squares of different sizes. It's not an even tessellation, therefore I am doing this in Illustrator, as I need the proportions to be exact. Then importing to Dreamweaver as one image.
The thing is, I would like the squares to be buttons - more than just roll over 'hot spots'. I would like each square to turn red, blue, yellow etc.
How do I do that ?
Any advice would be much appreciated.
Thank youNot sure what you original looks like or how large it is, but what about using CSS Sprites:
http://www.alistapart.com/articles/sprites
http://net.tutsplus.com/videos/screencasts/exactly-how-to-use-css-sprites/
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/
http://twitter.com/nadiap -
Cross browser CSS Buttons with background images
Hi All,
I have to make a button for a website in which the labels
will be DB driven, so i came up with css to make such buttons, but
the problem is i need the buttons to work in almost all browsers
(from version 5 - 7 IE, FF 1.0 -2.0, Opera 7 - 9 Netscape 6- 9,
safari and Mac IE and FF), The buttons are also designed in a
specific manner (i.e the button label will be having a break if
there are two words in it and will be aligned center to the
container. the edges of the button are curved and has a gradient
effect.)
I am not able to get the text centrally aligned also the text
goes off the container and gets hidden behind the right side image
in FireFox but in IE it manages to stretch the container but
doesn't gets aligned to the center, thats because i guess i am
specifying width to the container.
Any Help will be highly appreciated.
Thanks
VinayHi All,
I have to make a button for a website in which the labels
will be DB driven, so i came up with css to make such buttons, but
the problem is i need the buttons to work in almost all browsers
(from version 5 - 7 IE, FF 1.0 -2.0, Opera 7 - 9 Netscape 6- 9,
safari and Mac IE and FF), The buttons are also designed in a
specific manner (i.e the button label will be having a break if
there are two words in it and will be aligned center to the
container. the edges of the button are curved and has a gradient
effect.)
I am not able to get the text centrally aligned also the text
goes off the container and gets hidden behind the right side image
in FireFox but in IE it manages to stretch the container but
doesn't gets aligned to the center, thats because i guess i am
specifying width to the container.
Any Help will be highly appreciated.
Thanks
Vinay -
Hi i am trying to build a really simple banner that loads from an XML file. The idea was that the client wanted to be able to change things such as font colour, button colour, image links etc but the client would also like to alter the font or font family. I basically want to have a CSS inside the actionscript so that I can set the font family as a variable and change it via the xml. I think this is the best way to do it, or alternatively the client could just adjust an external CSS themselves. So far I have not got this to work and would greatly appreciate any help n loading in CSS in actionscript 2.0 as I have very little experience with it.
Below is the actionscript I already have in place .
1st Frame
// Load XML
var xmlItems = new Array();
langXML = new XML();
langXML.ignoreWhite = true;
langXML.load('setup.xml');
langXML.onLoad = function(sucess) {
if (sucess) {
parseFile(langXML);
//trace(menuItems);
play();
} else {
trace("XML problem!");
function parseFile(xmlDoc_xml) {
for (var a = 0; a<xmlDoc_xml.firstChild.childNodes.length; a++) {
// push labels into Array
xmlItems.push(xmlDoc_xml.firstChild.childNodes[a].firstChild.nodeValue);
trace(xmlItems);
Frame where content loads in :
// init movie
textTitle.text = xmlItems[0];
textsubTitle.text = xmlItems[1];
imageURL = xmlItems[2];
// Create Varible for RGB colour reference
titleColour = "0x" + xmlItems[3];
trace("titleColour:" + titleColour);
new Color(textTitle).setRGB(titleColour);
subtitleColour = "0x" + xmlItems[4];
trace("subtitleColour:" + subtitleColour);
new Color(textsubTitle).setRGB(subtitleColour);
clickURL = xmlItems[5];
buttonColour = "0x"+ xmlItems[6]
new Color(buttonBG).setRGB(buttonColour);to specify a font, you'll need to embed the font. unless you embed all fonts your client may want to choose, you have a difficult task ahead of you: dynamically embedding fonts in as2 is no easy task.
you may have other problems but, that's the key to your issue. -
Simple button help needed!
I want to make a simple round button that glows when you
mouse over it and depresses when you click it.
Apparently to do this I need to use Filters to make the glow
and bevels. But Filtersonly work on movie clips, buttons and text.
So I make a circle and convert it into a button symbol
(Btn1). Then I make another button symbol (Btn2) and use the first
button symbol (Btn 1) on the Up Over and Down frames of Btn 2.
Assorted Filters are applied to Btn 1 on the Up Over and Down
frames to get the effects I want.
I test the button (Btn2) using Enable Simple Buttons. It
works perfectly - glows on mouse over and depresses on click. Then
I try Test Movie -- and the button doesn't work!!!
Not does it work when exported as a SWF file!!!
I watched a tutorial video that came with my Flash Pro 8
Hands-On-Training (HOT) book and he used pretty much the same
technique -- except he only tested his button with Enable Simple
Buttons. I'll bet my house his didn't work with Test Movie either!
The stupid thing, is I was just able to achieve exactly what
I wanted very quickly using LiveMotion 2!
What is wrong here? Why is it so impossible to create a glow
button in Flash? Why has it been easy in Live Motion for years?
All help appreciated!
Thanks
craigI thought the nesting button situation might be the problem
BUT there is no other way to apply Filters to Up, Down, etc. Also,
a freaking tutorial book described that as a valid method, but
obviously it ain't.
I tried using movieclips as well but basically had the same
problem.
I mentioned LiveMotion 2 because that ancient program can do
easily what Flash Pro 8 seems incapable of.
What is the logic behind not allowing Filters to be applied
to simple graphics? It's absurd!
There's got to be a way... -
Hi
I am new to flash and having a bit of trouble. All I would
like to do is be able to create a button and have that button
navigate to a frame.
What I am doing now is:
Insert - New Symbol - Button and name the button (ex: about)
Go through the up/over/down/hit steps and return to scene 1
I then drag the about button onto the stage
I give the about button the instance name of about_btn
In the action layer, I enter the following code:
stop();
_root.about_btn.onRelease = function(){
gotoAndStop("about");
"about" being the keyframe I would like to go to
When I test the button, I get error 1120: "Access of
undefined property onrelease".
I am working on adobe flash cs3 on a pc. I know this is a
very simple issue and any help would be greatly appreciated.
Thank you.what have you done so far? what don't you know how to do?
where are you stuck at? need way more detail to help any
further. -
It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button when connecting the USB. Help?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
How do I restore my firefox toolbar? It was my main toolbar. My other one is google. And then another site tried to install a toolbar that I did not want. When I unchecked to get rid of it, apparently I unchecked the firefox toolbar by accident. I don't know if that's what happened for sure, but I'm guessing that's what happened.
'''<u>Menu Bar</u>''' (File, Edit, View, History, Bookmarks, Tools, Help) , see: <br/>
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
* Press F10, Menu bar will appear, click View, click Toolbars, click Menu bar
* Press ALT, the Menu bar will appear, click View, click Toolbars, click Menu bar<br />
* Hold down the ALT button while pressing V+T+M
'''<u>Navigation Toolbar</u>''' (Back/forward, Refresh...Home, URL/Location Bar, Search Bar): Do one of the following
#click View > Toolbars, click on "Navigation Toolbar" to place a check mark, OR#right-click the Menu Bar, click "Navigation Toolbar" to place a check mark. See: <br />
#*https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing
#*http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar
#*http://kb.mozillazine.org/Toolbar_customization
#*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
#*http://support.mozilla.com/en-US/kb/Navigation+Toolbar+items
'''<u>Bookmarks Toolbar</u>''': Same procedure as Navigation Bar except click "Bookmarks Toolbar".<br />
'''<u>Status Bar</u>''': click View, click Status Bar to place a check mark<br />
'''<u>Full Screen Mode</u>''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazine.org/Netbooks#Full_screen<br />
Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
<br />
The information submitted with your question indicates that you have out of date plugins with known security issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
* Shockwave Flash 10.1 r82
* Next Generation Java Plug-in 1.6.0_14 for Mozilla browsers
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from one of the links below; '''<u>the links take you directly to the download and you avoid the "getplus" download manager and "extras" (i.e., toolbars, virus scan links, etc.) on the main Adobe page.</u>'''
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''<u>but use IE</u>''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''<u>Download links and other information</u>''':
#** https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#** '''<u>or</u>''' you can download, save, then run the manual installers for IE, then for Firefox (and all other browsers) from here: http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
#* After the installation, start Firefox and check your version again.
Maybe you are looking for
-
How can I delete specific convos in the messages app without it gliching?
I have an iPhone 4S with absolutely everything up to date. Now I'm pretty much what you could call a texting hoarder.. I have text messages on my phone all the way up until the previous year sometimes. As of this very moment, I'm trying to delete cer
-
Every once in awhile, I will forget to put my MacBook Pro to sleep before I go to bed. Without fail, in the morning when I try to wake it from sleep, it's frozen. The machine is still on and the screen is black, but no matter what you press on the ke
-
Is it possible in calculate this in BEx.......
Hi Guys, This is a bit of a strange requirement but a requirement nonetheless, and im curious to know if it can be done without an ABAP person being involved. The scenario: We have a BW Query that is reporting data on a Project level. Say for example
-
Suppose, i have a scenario where I collect a fixed number of messages and bundle it to single message and send it to target system. (More like Collecting messages from single interface based on payload example, but i want the counter to have predefin
-
when it checks add on compatability every time, its starting to get a little annyoning. I like firefox but am about to uninstall it.