CSS cookieurl: case sensitive?

Hello,
As far as I understand, the HTTP header cookie field, and the embedded cookie (in a URL) are case-sensitive. Is this correct?
The settings look like this:
content stickyCookie
advanced-balance cookieurl
string prefix "SESSION_ID="
On the HTTP header the cookie field looks like this:
Set Cookie: SESSION_ID=ABCDEF
But if instead of this, the request comes from a client with the cookie embedded in the url, it looks like this:
http://localhost/Info/index;session_id=ABCDEF?page=home.
Is this field case-sensitive for the CSS? I know it is for the ACE, as I have done this and there is the "cookie secondary" command where you can specify how the url-embedded cookie looks like.
So I am afraid there is no way of making this work on a CSS?
Any help will be much appreciated!

Hi Javier,
The Cisco CSS is case-sensitive when searching for this string.
When configuring the CSS 11000 and 11500, determine first if you need a server cookie string. If the string operation under the content rule is match-service-cookie, which is the default setting, this parameter must be configured. In this case the service cookie string is matched against the cookie contained in the HTTP header for load balancing decision.
If the string operation under the content rule is set to the hash method, this parameter is not needed. In order to select one of the available servers, the cookie contained in the HTTP header is mathematically processed using a hashing algorithm. If available, the hash algorithm assigna the connection carrying a certain cookie to the same server. This example focuses on the match-service-cookie case.
Note: Cookies are case sensitive.
Configuring the Service
training4(config># service server_g
training4(config-service[server_g])# string LV2KJK (the server cookie text)
training4(config># service server_h
training4(config-service[server_h])# string AARIKA
Configuring the Content Rule
Note: Cookies require a Layer 5 rule.
You can create a Layer 5 rule by adding a URL.
For example, .
A Layer 4 rule can be promoted to a Layer 5 rule by issuing the advanced-balance cookies command.
Choose the advanced-balance method.
training4(config-owner-content[cookie-layer5])# advanced-balance cookies
Configure the string operation.
training4(config-owner-content[cookie-layer5])# string operation ?
match-service-cookie (DEFAULT)
hash-crc32
hash-xor
hash-a
Define the starting/ending bytes.
training4(config-owner-content[cookie-layer5])# string range 1 to 200
Start byte position of cookie/url after header (Range:1-600)
Specify the prefix located in the string range.
training4(config-owner-content[cookie-layer5])# string prefix "ASPSESSION"
"Quoted textual information"(Len: 0-32)
Indicate how many bytes to skip after the starting prefix.
training4(config-owner-content[cookie-layer5])# string skip-length 9
"Quoted textual information"(Len: 0-32)
Indicate how many bytes after the prefix/skip-length make-up the string.
training4(config-owner-content[cookie-layer5])# string process-length 6
Integer value(Range: 0-64)
If no string process length is configured, search after end of string character.
training4(config-owner-content[cookie-layer5])# string eos-char "&"
"Quoted textual information"(Len: 0-5)
Specify the failover in the event that a server goes down or is suspended.
training4(config-owner-content[cookie-layer5])# sticky-serverdown-failoversticky-srcip
sticky-srcip-dstport
sticky-srcip
balance (Default)
redirect
reject
Below is an example of a cookie string, and how some of the parameters work.
ASPSESSIONJJKKJJKK=LV2KJK44444444
!--- The string prefix = ASPSESSION.
!--- The string skip-length = 9. Skip
!--- nine characters after the prefix.
!--- The string process-length = 6, which would make
!--- the string LV2KJK matching service server_g.
ASPSESSIONSQPMMJHK=AARIKAMDESLD
!--- Matches service server_h.
Below is a sample configuration for the cookie strings.
!************************** SERVICE **************************
service server_g
ip address 172.17.63.240
string LV2KJK
active
service server_h
ip address 172.17.63.241
string AARIKA
active
!*************************** OWNER ***************************
owner braden
content server-cookie
protocol tcp
vip address 172.17.63.199
port 80
advanced-balance cookies
string range 1 to 200
string prefix "ASPSESSION"
string skip-length 9
string process-length 6
add service server_g
add service server_h
active
Kindly tell if this information is of any use to you.
Sachin garg

Similar Messages

  • In ALV Report Filter selection should be case sensitive

    Dear All,
    since one field is case sensitive in database table , i have to fetch that in alv report , but when i am applying  filter on that field its is simply fetching data with case description.  if its in caps it should fetch caps data but in   smaal case report showing no data
    Regards,
    Pankaj Vashista

    Hi,
    All text datas are case sensitive.
    To make it work perfectly You have to Use the Keyword translate to Upper Case than display
    Now filter can work.
    Without Transalation to Upper Case filter will not work.
    Regards
    Arbind

  • How do I install PSE8 on MAC with case sensitive drive?

    I tried to install PSE8 for mac and i get an error saying it cannot be installed on a case sensitive drive.
    Is there a fix for this?

    What is the purpose of this?
    I have my drive formatted case sensitive on purpose for more security and stability.
    Why on earth would y'all choose to do this?

  • Is a Full Text Index search case sensitive or not in SQL Server 2012?

    I setup full text index on my contact table and am attempting to run a search on it using the following query:
    SELECT *
    FROM sysdba.Contact C
    WHERE CONTAINS(C.FirstName, 'Test')
    OR CONTAINS(C.LastName, 'Test')
    The problem is it's clearly running a case sensitive search. I did a quick search to find out how to change it to be case in-sensitive and found two pages (both for SQL Server 2012) with conflicting answers:
    1 - MSDN - "Query with Full-Text Search" - http://msdn.microsoft.com/en-us/library/ms142583(v=sql.110).aspx
    Case sensitivity
    Full-text search queries are case-insensitive. However, in Japanese, there are multiple phonetic orthographies in which the concept of orthographic normalization is akin to case insensitivity (for example, kana = insensitivity). This type of orthographic normalization
    is not supported.
    1 - TechNet - "Full-Text Search (SQL Server)" - http://technet.microsoft.com/en-us/library/ms142571(v=sql.110).aspx
    Full-text queries are
    not case-sensitive. For example, searching for "Aluminum" or "aluminum" returns the same results.
    Can someone please explain this? Is it possible to do it without it being case sensitive? If yes, how?
    (Sorry, I couldn't make those links b/c TechNet hasn't verified my account)
    Thank you for your time and help,
    Hanan

    Whats the collation setting for the columns? try using a case insensitive collation as below
    SELECT *
    FROM sysdba.Contact C
    WHERE CONTAINS(C.FirstName COLLATE SQL_Latin1_General_CP1_CI_AS, 'Test')
    OR CONTAINS(C.LastName COLLATE SQL_Latin1_General_CP1_CI_AS, 'Test')
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported.  Please choose a different volume for installation."  I am f

    I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported.  Please choose a different volume for installation."  I am further told that "Adobe apps cannot be installed on case-sensitive drives, you need to Install the product onto an HFS+ or HFSJ non-case-sensitive drive."
    What I don't understand is this:  I originally bought and installed Photoshop CS6 back in March 2013, and it worked fine.  Yesterday my hard drive had to be replaced and my computer person salvaged as much of what was on it as he could, but now I have to reinstall Photoshop.  1) Why did it work before and it's not working now?  2) Is there anything I can do that does not involve reformatting the hard drive?

    It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
    Error "Case-sensitive drives not supported" or similar install error | Mac OS
    Mylenium

  • Print dialog options in case sensitive file system

    Since changing the file system running Lion and Mountain Lion from Mac OS Extended (Journaled) to Mac OS Extended (Case-sensitive, Journaled), certain features in print dialogs have disappeared.
    Particularly the option to print notes with slides in Microsoft Powerpoint are gone. Also, when choosing to print only 1 (or more, but not all) of multiple pages in Microsoft Word, the printer will nevertheless print all pages.
    This problem occurs on printers of different brands, i.e. HP, Lexmark, Brother.
    I was able to determine this problem by reproducing the issue on a cleanly installed Macbook Pro with OS X 10.8 formatted as Mac OS Extended (Case-sensitive, Journaled) vs a cleanly installed Macbook Pro with OS X 10.8 formatted as Mac OS Extended (Journaled), not Case-sensitive.
    Has anyone else had the same problem and maybe a solution?

    I just fixed this on my Mac. It is a bug in Microsoft Office... the Printer Dialog Extension (PDE) for Powerpoint is located in a directory named "Plugins", but PowerPoint is looking for it in "PlugIns". This obviously does not work in a case-sensitive filesystem.
    Here are the steps to fix the issue:
    http://apple.stackexchange.com/a/119974/69562

  • How can I backup data from a case-sensitive volume to a NON-case-sensitive volume?

    The case-sensitive volume in this instance being a desktop-mounted disk image volume.
    A tragi-comedy in too many acts and hours
    Dramatis Personae:
    Macintosh HD: 27" iMac 3.06GHz Intel Core 2 Duo (iMac10,1), 12 GB RAM, 1 TB SATA internal drive
    TB1: 1 TB USB external drive
    TB2: 2 TB USB to Serial-ATA bridge external drive
    Terabyte: a .dmg disk image and resulting desktop volume of the same name (sorry, I don't know the technical term for a .dmg that's been opened, de-compressed and mounted -- evanescently -- on the desktop)
    Drive Genius 3 v3.1 (3100.39.63)/64-bit
    Apple Disk Utility Version 11.5.2 (298.4)
    Sunday morning (05/08/11), disk utility Drive Genius 3's drive monitoring system, Drive Pulse, reported a single bad block on an external USB2.0 1TB drive, telling me all data would be lost and my head would explode if I didn't fix this immediately. So I figured I'd offload the roughly 300 GB of data from TB1 to TB2 (which was nearly empty), with the intention of reinitializing TB 1 to remap the bad block and then move all its data BACK from TB 2. When I opened TB1's window in the Finder and tried to do a straight "Select All" and drag all items from TB1 to TB2, I got this error message:
    "The volume has the wrong case sensitivity for a backup."
    The error message didn't tell me WHICH volume had "the wrong case sensitivity for a backup," and believe me, or believe me not, this was the first time I'd ever heard that there WAS such a thing as "case sensitivity" for a drive. I tried dragging and dropping some individual folders -- some of them quite large, in the 40GB range -- from TB1 to TB2 without any problem whatsoever, but the majority of the items were the usual few-hundred-MB stuff that seems to proliferate on drives like empty Dunkin' Donuts coffee cups on the floor of my car, and I didn't relish the idea of spending an afternoon dragging and dropping dribs and drabs of 300GB worth of stuff from one drive to another.
    Being essentially a simple-minded soul, I had what I thought was the bright idea that I could get around the problem by making a .dmg disk image file of the whole drive, stashing it on TB2, repairing and re-initializing TB1, and then decompressing the disk image I'd made of TB1, and doing the "drag and drop" of all the files in resulting desktop volume to TB1. So I made the .dmg of TB1, called "Terabyte," stashed that .dmg on TB2 (no error messages this time), re-initialized and then rebooted the iMac from my original Snow Leopard 10.6.1 disks and used Disk Utility to erase and initialize TB1 -- making sure that it was NOT initialized as case-sensitive, and installed a minimal system on TB1 from the same boot. Then I updated that 10.6.1 system to 10.6.7 with System Update, and checked to see that Disk Utility reported all THREE drives -- internal, 1TB, and 2TB -- as Mac OS Extended (Journaled), and no "case sensitive" BS. I also used Drive Genius 3's "information" function for more detailed info on all three drives. Except for the usual differing mount points, connection methods, and S.M.A.R.T. status (only the Macintosh HD internal, SATA 1TB drive supports S.M.A.R.T.), everything seemed to be oojah-***-spiff, all three drives showing the same Partition Map Types: GPT (GUID Partition Table.) Smooth sailing from here on out, I thought.
    Bzzzzt! Wrong!
    When I opened the Terabyte .dmg and its desktop volume mounted, I tried the old lazy man's "Select All" and drag all items from the desktop-mounted drive "Terabyte" to TB1, I got the error message:
    "The volume has the wrong case sensitivity for a backup."
    I then spent the next three hours on the phone with AppleCare (kids -- when you buy a Mac ANYTHING, cough up the money for AppleCare. Period.), finally reaching a very pleasant senior tech something-or-other in beautiful, rainy Portland, OR. Together we went through everything I had done, tried a few suggestions she offerred, and, at the end of three hours, BOTH of us were stumped. At least I didn't feel quite as abysmally stupid as I did at the beginning of the process, but that was all the joy I had gotten after two solid days of gnawing at this problem -- and I mean SOLID; I'm retired, and spend probably 12 hours a day, EVERY day, at the keyboard, working on various projects.
    The AppleCare senior tech lady and I parted with mutual expressions of esteem, and I sat here, slowly grinding my teeth.
    Then I tried something I don't know why I was so obtuse as to not have thought of before: I opened Apple's Disk Utility and checked the desktop-mounted volume Terabyte (Mount Point: /Volumes/Terabyte), the resulting volume from opening and uncompressing the .dmg "Terabyte".
    Disk Utility reported: "Format : Mac OS Extended (Case-sensitive)." Doh!
    Obviously, TB1, the 1 TB USB external drive I'd actually bought as part of a bundle from MacMall when I bought my 27" iMac, and which I had initialized the first day I had the iMac up and running (late November 2009), had somehow gotten initialized as a Case-sensitive drive. How, I don't know, but I suspect the jerk behind the keyboard. Whatever the case, when I created the Terabyte disk image (the drive's original name: when I erased and re-initialized it -- see above -- I renamed it "1TB" for quick identification), the original drive's "Case-sensitive" format was encoded too. So when I tried to drag and drop EVERYTHING from the desktop-mounted volume "Terabyte" to the newly initialized and "blessed" (now THERE's a term from the past!), the system recognized it as an attempt as a total volume backup, and hit me with "The volume [the desktop-mounted volume "Terabyte" -- BB] has the wrong case sensitivity for a backup." And, of course, the reinitialized TB1 was now correctly formatted as NOT "case-sensitive."
    Well, that solved the mystery (BTW, Disk Utility identified the unopened Terabyte.dmg as an "Apple UDIF read-only compressed {zlib}, which is why the .dmg file could be copied to ANY volume, case sensitive or not), but it didn't help me with my problem of having to manually move all that data from the desktop-mounted volume "Terabyte" to TB1. I tried to find a way to correct the problem at the .dmg AND opened-volume-from-.dmg level with every disk utility I had, to no avail.
    Sorry for the long exposition, but others may trip over this "case-sensitive" rock in the road, and I wanted to make the case as clear as possible.
    So my problem remains: other than coal shovel by coal shovel, is there any way to get all the data off this case-sensitive desktop-mounted volume "Terabyte" and onto TB1.
    Not that I know whether it would made any difference or not, one of the things that got me into this situation was my inability to get "Time Machine" properly configured so it wasn't making new back-ups every (no lie) 15 minutes.
    Philosophical bonus question: what's the need for this "case-sensitive," "NOT case-sensitive" option for disk initialization?
    As always, thanks for any help.
    Bart Brown

    "Am I to understand that you have a case-sensitive volume with data that you want to copy to a case-insensitive volume? And the Finder won't let you do it? If that's what the problem is, the reason should be obvious: on the source volume, you may have two files in the same folder whose names differ only in case. When copying that folder to the target volume, it's not clear what the Finder should do."
    Yes, I understand all that... NOW.
    What I had (have) is a USB external 1TB drive (henceforth known as "Terabyte") that I bought with my 27" iMac. I formatted, and put a minimal (to make it bootable) system on Terabyte the same day back in late November 2009 that I set up my 27" iMac. Somehow -- I don't know how -- Terabyte got initialized as "case-sensitive." I didn't even know at the time that there WAS such a thing as "case-sensitive" or "NOT case-sensitive" format.
    Sunday morning (05/08/11), Drive Pulse, a toolbar-resident utility (that's Part of Drive Genius 3) that monitors internal and external drives for physical, problems, volume consistency problems, and volume fragmentation, reported a single bad block on the volume Terabyte, advising me that it would be best if I re-formatted Terabyte ASAP. I thought I could open Terabyte in a Finder window, Select All, and drag everything on the drive to ANOTHER USB external drive of 2 TB capacity (henceforth known as TB2). When I tried to do that, I got an error message:
    "The volume has the wrong case sensitivity for a backup."
    First I'd heard of "case sensitivity" -- I'm not too bright, as you seem to have realized.
    Oddly enough (to me), I could move huge chunks of data, including a folder of 40GB, from Terabyte to TB2 with no problem.
    Then the scenario unfolded per my too-convoluted message: several hours of trying things on my own, including making a .dmg of Terabyte (henceforth to be known as Terabyte.dmg) -- which left me with the exact same problem as described in the previous 4 paragraphs; and my 3 hours on the phone with AppleCare, who at least explained this case-sensitive business, but, after some shot-in-the-dark brainstorming -- tough to do with only one brain, and THAT on the OTHER end of the line --  the very pleasant AppleCare rep and I ended up equally perplexed and clueless as to how to get around the fact that a .dmg of a case-sensitive volume, while not case-sensitive in its "image" form (Terabyte.dmg), and thus able be transferred to TB1 or TB2 with no problems whatsoever, when opened -- either by double-clicking or opening in Disk Utility -- produced a desktop-mounted volume (henceforth known as the volume "Terabyte," the original name of the case-sensitive volume from which TB1.dmg had been made) that had the same case-sensitivity as the original from which it was made.
    In the meantime, having gotten the data I needed to save off the physical USB "case-sensitive" volume Terabyte in the form of Terabyte.dmg, I erased and re-initialized the physical USB "case-sensitive" volume Terabyte, getting rif of the case sensitivity, and renaming it TB1. But it all left me back at square one, EXCEPT I had saved my data from the original "Terabyte" drive, and reformatted that drive to a NON- case-sensitive data now named TB1. The confusion here stems from the fact that problem case-sensitive drive, from which I made Terabyte.dmg, was originally named "Terabyte". When I re-initialized it as a NON case-sensitive drive, I renamed it TB1. I'm sorry about the confusing nomenclature, which I've tried to improve upon from my original message -- usual text-communication problem: the writer knows what he has in mind, but the reader can only go by what's written.
    So, anyway, I still have the same problem, the desktop-mounted volume "Terabyte" still cannot be transferred in one whole chunk to either my internal drive, TB1, TB2, as the Finder interprets it as a volume backup (which it is), and reads the desktop-mounted volume "Terabyte" as case-sensitive, as the original volume -- from which the disk image Terabyte.dmg was made -- had been at the time I made it. 
    "As long as that situation doesn't arise, you should be able to make the copy with a tool that's less fastidious than the Finder, such as cp or rsync."
    I'm afraid I have no idea what "cp or rsync" are. I'd be happy to be educated. That's why I came here.
    Bart Brown
    Message was edited by: Bartbrn
    Just trying to unmuddy the water a bit,,,

  • I am trying to install MasterCollection_CS6_LS16. When I click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation.

    I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?

    Hey iraravitz,
    Could you please let me know what version of OS are working on.
    You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
    So, please try installing on a drive that has been formatted with a supported file system.
    You might refer the KB doc link mentioned below for the same:
    Error "Case-sensitive drives not supported" or similar install error | Mac OS
    Let me know if this helps.
    Regards,
    Anubha

  • How can I transfer my iphoto library from a Mac OS Extended (Case-sensitive, Journaled) harddrive to a Mac OS Extended (Journaled) hard drive?

    Community,
    Every time I try to transfer my iphoto library from a Mac OS Extended (Case-sensitive, Journaled) harddrive to a Mac OS Extended (Journaled) hard drive, I receive the attached message: "You can't copy 'iPhoto Library' because it has the same name as another ideon on the destination volume, and that volume doesn't destinguish between upper- and lowercase letters in filenames."
    My theory is, if I am able to unpackage my iphoto library, I can transfer each folder one at a time so that I can trouble shoot any "duplicates." Will this work?
    Let's say that works. How can I repackage the library so iphoto recognizes it?
    Is there a better way?
    Thank you,
    Jonathan

    Can we assume that I don't have any naming conflicts? Clearly there are or else I wouldn't get the error I'm getting.
    The error doesn't mean you have name conflicts. It means that the Finder won't take the chance that you might have them.
    You're suggesting that all I would need to do would be to use Carbon Copy Cloner to transfer the files from the case-sensative harddrive to my Extended Journaled harddrive?
    Yes. But I would just use the built-in rsync shell command. First, back up all data if you haven't already done so. Launch the Terminal application by entering the first few letters of its name into a Spotlight search. Copy or drag -- do not type -- the line below into the Terminal window, then press the space bar:
    rsync -aE --delete
    Now drag the iPhoto library you want to copy into the window. You should have something like this:
    rsync -aE --delete /Users/you/Pictures/iPhoto\ Library
    Drag the Pictures folder on the destination volume into the window. Now you have this (line will wrap on the page):
    rsync -aE --delete /Users/you/Pictures/iPhoto\ Library /Volumes/something/Users/you/Pictures
    Press return. The copying operation will start. When it finishes, you'll see a new dollar-sign ("$") prompt below what you entered. If there were no errors, you're done.

  • Create directory / object name must NOT be case sensitive

    SQL Dev. 2.1 - the wizard, chosen from the left side navigator, submits a wrong create statement in which the object name becomes case-sensitive. This should not be so! Even if you write the new object name in small letters , the object name must end up in the data dictionary with capitals. kind regards Inger ([email protected])

    Which wizard? If I use a create table wizard, for example, and enter the table in lower case, this is indeed stored in the DB as upper case, as you require.
    Please provide more detail for your problem.
    Sue

  • How to retrieve column names in a query in a case sensitive way

    Given a query, I want to extract all the column names/aliases in the query in a case-sensitive way.
    When I use dbms_sql.describe_columns() or java.sql.ResultSetMetaData classes getColumnName() or getColumnLabel()
    it returns the columns name ONLY in Upper case.
    My application needs to extract the column names in the same case as it appears in the query string.
    Is there any API to get this without parsing the SQL query string?
    Thanks
    PS: The dbms_sql.describe_columns() returns the column name in upper case.
    declare
    IS
    l_column_recs DBMS_SQL.DESC_TAB;
    l_cur NUMBER;
    l_column_count NUMBER;
    BEGIN
    l_cur := dbms_sql.open_cursor;
    dbms_sql.parse(l_cur, 'select target_type from targets', dbms_sql.NATIVE);
    dbms_sql.describe_columns(l_cur, l_column_count, l_column_recs);
    FOR i IN l_column_recs.FIRST..l_column_recs.LAST
    LOOP
    dbms_output.put_line(l_column_recs(i).col_name);
    end loop;
    end;
    /

    As far as the result set is concerned, though, the column name is in all upper case. If you query the data dictionary, you would see that the TARGET_TYPE column in the TARGETS table is stored in upper case.
    The way Oracle works is that column names that are not enclosed in double-quotes are converted to upper case in the data dictionary and elsewhere and then Oracle looks for the column name in the table definition. That is what allows Oracle to have case-insensitive identifiers unless a user specifies case-sensitive identifiers by enclosing the identifier in double quotes.
    If you changed the query to be
    SELECT target_type as "target_type"
      FROM targetsOracle should report the alias in a case sensitive fashion because you've now indicated that the alias should be treated as case sensitive.
    Justin

  • How can I deal with case-sensitive filenames referred to inconsistently inside other files?

    I have downloaded into Dreamweaver an existing web site that I'll be taking over from someone else.  The site was built with Microsoft Front Page and apparently now runs on a Windows web server.  While redesigning the site, I'd like to upload it to a web server belonging to me, where I can maintain a work in progress that is accessible to others (so they can give me input as I go along).  But my site is running on a Unix system, where filenames are case-sensitive.
    In the site I've inherited, I've discovered at least one file that is referred to in other files sometimes with one character in upper case and other places in all lower-case.  The actual filename contains the upper case character and locally, on my Windows system, it doesn't matter.  But on the server the file is not found when it is referenced in all lower-case.
    Of course, I can create an all lower-case symlink on my Unix server for the mixed-case file that I know about.  But I don't want to look through every file on the site for other files which may vary, case-wise, in how they are referenced.  Is there any way that Dreamweaver can help me;  for example, by going through and changing all mixed-case filename references inside files, to be consistent with the actual filenames?
    I know this is a lot to ask of Dreamweaver and I'm not optimistic.  But if anyone knows of a solution, I'd appreciate it.

    he means that if you use the file > find function
    (on windows this can be called upoon using CTRL + F)
    you will be able to go through all the files which are cauing you a problem and change their names so that they are all in the same case
    be warned thou
    if case sensitivity is your problem,
    and
    if some code references to your files are written in one case and some are written in the other case, simply changeing the case of the file names will not help.
    what you are trying to do will only work if
    > ALL of the file names are in one case
    or
    > ALL of the files names are the same case
    bcause this will mean you can change the one which does not always match using CTRL + F
    if there is a mix and match on both sides then you are in for a lot of work, if this problem involves multiple names then i would advise you to simply start over!

  • How do i reformat a case sensitive external hard drive without losing data

    I know there are a lot of posts about this, and i have spent hours trying to find a soloution / understand what people have responded to others, but i can't work this out.
    I also have a Buffalo HD (let's call it HD1) that stores my itunes library.
    I have a WD My Passport for Mac (let's call it HD2) that backs up my Mac Book Pro.
    I have an older WD that has older TM back ups on it from previous computers (let's call it HD3)
    I have one spare completely 'clean' WD hard drive (let's call it HD4).
    My laptop was really slow and full so i went to Genius bar, they sold me the Buffalo HD and they moved my itunes to it and set it up so it now has my itunes. I used this disk to run two TM Backups before i realised the drive was nearly full, so i bought the WD My Passport HD2.
    I now use WD My Passprt HD2 for TM.
    I want to MOVE the backups on HD1 to My Passport HD2 as there is lots of space on it. I also want to move my itunes library from HD2 as a back up.
    But i can't!!!
    After reading for hours, apparently this is because my HD1 is case sensitive, journaled. And it needs to be Journaled to work with TM/OSX or something very confusing. I have read lots of threads about re-formatting / partitioning and all things that are way over my head. But the one thing i do understand is if i reformat HD1, it erases the data.
    This is NOT an option as it holds my WHOLE itunes. The Itunes is WAY too big to drag onto my mac book pro and then move it over to HD2 and make that my itunes folder.
    HOW THE **** ARE YOU SUPPOSED TO BACK UP THE CASE SENSITIVE DRIVE BEFORE REFORMATTING IT IF IT'S TOO BIG TO FIT BACK ON YOUR COMPUTER? Surely that's the whole point of having an external drive... to back up AND give you more space?
    I'm so mad that the apple store did this to me... they should know that case sensitve wouldn't work with a passport... that i would have problems. UGh.
    I have options to move the files from HD1 as i have HD2 and HD3 and then also the completely unused HD4... but i can't move anything anywhere due to this case sensitive nightmare.
    Someone PLEASE HELP ME.
    thanks.

    Hi Kappy,
    Just wondering if you had any advice for my situation . . .
    My time machine backup was backing up to a drive that was "Mac OS X Enteded Journaled, Case Sensitive."  I had no idea what this meant, or that it would even cause issues.
    I took my computer to the Apple store yesterday, and they wiped it clean.  When they tried to restore it from the Time Machine backup drive, it would not work.  Their guess is that Time Machine cannot restore from a drive that is "case sensitive."
    Any thoughts on how I can convert my time machine backup data from a "case sensitive" state, to a "non-case sensitive" state?  I've tried to just drag and drop the files from the case sensitive formatted drive to a new drive that I have that is formatted non case sensitive, but I get the following error message:
    "The volume has the wrong case sensitivity for a backup"
    I just really want my data back - I thought TimeMachine was the way to go (and was supposed to work) but unfortunately it is not.
    Any help you can provide would be greatly appreciated.
    Thanks,

  • Why Case-Sensitive while assigning tasks to other users??

    I am trying to assign a task to another user through AdminUI.
    While searching for users, I am supposed to provide case-sensitive search text to find actual users.
    In previous installations it is not a problem. i.e only in production it happens.
    Is there any place to modify this settings?
    Please see the attached screenshot of the page.
    Thanks,
    Nith

    Raghu,
    thanks for the reply, you are right as per the audit .But suppose if it is for 200 users ,creating 200 CUP requests will be impractical right.
    there should be some solution for this , because there will be many situations practically where we have to assign roles to N number of users.
    Is this possible in GRC 10 ? any idea ?
    Regards,
    Jaags

  • Network diagnostics is not accepting the WEP password on my wireless router. I know the password is case sensitive and was very careful in entering it but it still gives me the "Unable to join Wi-Fi Network" error message.

    I need help setting up the wireless router for my iMac. I did not know the WEP password when I first turned it on to set things up. Now that I know the WEP password I cant get Network Diagnostics to accept it. I know it is case sensitive and was very careful when I entered the password. What should I do?

    Hi, unfortunately WEP is about as secure as a bar of gold lent to a Gang Den! It can be broken in under 30 seconds these days!
    If the PW is ASCII, try enclosing it in qoute marks, if Hex try preceding it with the & or % sign.
    Also, is the Router set to only allow connect ion to MAC addies of the Interface?

Maybe you are looking for

  • Itunes only syncs PART of my library to the iPhone

    I made some modifications to my iTunes library a few weeks ago, and only recently noticed that my iPhone suddenly has NO music. iTunes looks completely normal; all my music is there, all playlists, etc. When I go to sync just a few playlists to the i

  • Changes in Application form?

    Hi Gurus, Can any1 please let me know...How to make modifications to the application form which has SAPscript attached?? My requirement is to do coding for some lines on the SAPscript and I have extensively worked on Smartforms so not familier with S

  • Crystal Reports 2008 and Postscript

    Hello, I think I have to start a new thread for this. Originally I described the problem here: Printing Crystal Report to Postscript Now we upgraded our Crystal Reports for Visual Studio 2005 to the latest version - CR 2008 SP0. We had purchased the

  • You can't use this version of Mail with this version of Mac OS X

    Help! I installed MAC OS X 10.8.3 and after reboot I can no longer use Mail.

  • There are no stack configurations available in the Maintenance Optimizer

    Hello, I am trying to install Enhancement Pack 1 (EhP 1) on our DEV system, using SAINT in SAP NerWeaver 7.0. I have downloaded the EHP1 and cpoied them into the "EPS\in" directory. When I press the u201CStack Configurationu201D button, I get a pop-u