CSS Design question

Hi All,
I have a couple of questions around the CSS 11501 would be grateful if any gurus out there cud shed more light, here goes;
-Does the CSS support bridging between 2 vlans? In a similar way to the CSM. What command might be used to achieve this?
Thanks.
Kind Regards,

Thanks for your response Giles.
Gotcha, further more ... so if CSS is L-2 adjacent to the servers do the servers have to have loopbacks created for the VIP?
I wud assume this wud be required as the CSS will only be re-writting the MAC address? Can you please shed more light here as well.
Cheers

Similar Messages

SCA design question - PIX and SCA with dual logical SSL server.

I have a SCA design question. please correct or verify my solution.
1. connectivity.
<Client with port 443>--<ISP>--<PIX>--<SCA>--<SERVER(two IP on single NIC and each IP associates to WEB server) with port 81>
* client will access WEB server with x.x.1.100 or x.x.1.101
2. physical IP address
- PIX outside=x.x.1.1
- PIX inside=x.y.1.1
- SCA device=x.y.1.2
- SERVER NIC1=x.y.1.10
- SERVER NIC2=x.y.1.11
3. PIX NAT
- static#1=x.x.1.100 map to x.y.1.10
- static#2=x.x.1.101 map to x.y.1.11
4. SCA configuration.
mode one-port
no mode one-port
ip address x.y.1.2 netmask 255.255.255.0
ip route 0.0.0.0 0.0.0.0 x.y.1.1
ssl
server SERVER1
ip address x.y.1.10
localport 443
remoteport 81
server SERVER2
ip address x.y.1.11
localport 443
remoteport 81
Thanks,

The document http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/scacfggd/ has a link to a page which describes how to use the configuration manager command line interface to configure the Secure Content Accelerator. Several configuration examples are also included in this page.

No CSS Design View?

I'm a guy that usually likes to style apps using an external CSS and selecting a component to style, and having a way to add that component's properties/styles to edit.
Flash Builder 4 has done away with this, but to me it feels like it's going BACKWARDS.. but it's probably something I'm missing, so I'd appreciate the way people are using it...
So right now it seems like I can set styles ON a component, and then MOVE it to the existing CSS file I have, but I want to make sure that this doesn't leave ANYTHING within the code view that is styled? I tested it and it seemed to leave backgroundColor in the mxml declaration.
On top of that, there's no autocomplete for any CSS in the CSS view?
Just seems for CSS view you're somewhat stuck to doing it all by hand again...

What SDK version are you using?
Let me start with the easy questions.
Autocomplete in CSS
Code hinting is supported in the CSS editor. If you're in a Flex 4 project, make sure you're using namespace qualified type selectors http://opensource.adobe.com/wiki/display/flexsdk/CSS+Namespaces+Support. That's the typical problem people have during the transition.
CSS Design View
There are a few reasons why CSS Design View isn't supported for Flex 4. Flex 4 skinning, in many cases, replaces CSS styles. For example, backgroundColor isn't supported for every component. For more information, see http://opensource.adobe.com/wiki/display/flexsdk/More+Styles+for+Spark+Skins or the Flex 4 reference http://help.adobe.com/en_US/flex/using/index.html. CSS Design View is supported for SDK 3 projects, but not for SDK 4.
Can you explain in more detail what you mean about setting styles on a component and moving them to a CSS file? Sounds like you're using Design view to set styles in MXML then convert them to CSS declarations. This should be fine since Design view should only let you set valid style properties.
Jason San Jose
Software Engineer, Flash Builder

Help with CSS Designer?

I am having a lot of trouble with the left side of CSS Designer. Sorry to sound like such a kvetch!
To take a simple example - From the Welcome screen I create a fuid grid layout and name my style sheet mystyles.css. When the document window/program opens I am seeing boilerplate.css in bold and only two selectors down below - "html, button, input, select, textarea" and "html". Why only two since the boilerplate has a huge complement of selectors?
Next question (more important) - when I click on mystyles.css a list of 16 selectors pops up, although the only one I was expecting to see was the selector for "grid container"! Why does this happen? Why doesn't Dreamweaver let me create my own selectors as I build the site? I have read that mystyles.css should contain only those style rules which I have inserted into the head of my code. Is that not true?
In general I feel that Adobe relies too much on robotic tutorials without explaining the underlying architecture. When the beginning uses starts out on his/her own, it is easy to get confused.
Please help!
Kevin from Cambridge

Please let me know if you are willing to continue with this.
That's why I'm here!
The CSS in each of those stylesheets provides the "boilerplate" layout for your fluid grid pages. Without that CSS, you would have no "fluid" and no "grid". That's why both of them contain pre-defined rules, many of which correspond to the ID's already assigned to the HTML (or the tag(s)) that is/are written on the page when it is first opened.
The contents of the @media pane are determined by the selections you made for the various widths and gutters in the New Page dialog that opened when you selected the Fluid Grid Layout option. You can adjust these as needed once they are written during this process.
So what are your further questions?

CSS Designer and CS6

I cannot find a simple answer to a simple question. I signed up for a monthly subscription to Dreamweaver, not all of CC. My program states it is CS6. I am looking at help/training videos and they keep talking about the CSS Designer and a couple of other things I cannot find. Does that mean I am not using Dreamweaver CC, even though it was my understanding that I would have the latest/greatest?

MHMcginty wrote:
I signed up about a month ago for the SINGLE PRODUCT that is CS6 and build 6006.
Did I not sign up for Creative Cloud when I purchased the monthly subscription of Dreamweaver?
Did you sign up for the Single App Creative Cloud subscription?
If so, you downloaded CS6 back then.
On June 17, Dreamweaver CC (the next major upgrade from CS6) was released. One of the new features in CC is the CSS Designer.
CC should be a free upgrade for all subscribers so, for you, it should be a case of logging in to the Cloud and downloading CC.

CSS Designer in Depth | Creative Cloud for Web | Adobe TV

Get an in-depth look at the powerful new CSS Designer tools in Dreamweaver CC. Intuitive visual editing tools help you generate clean, web-standard code and quickly apply CSS properties like gradients and box shadows. You can see the effects on your designs immediately, eliminating tedious tweaking and the need to go back and forth to Code view.
http://adobe.ly/ZSeWkr

The new CSS Designer feature in Dreamweaver CC is a very nice addition to the interface’s workflow. However, it’s not best for all workflows, whereby there should still be a non-assisted CSS editor option available, like in CS6, “without” all the new visual designer tools.
In CS6’s CSS properties editor you can quickly glance at the currently selected element’s CSS properties and directly edit the actual property values in a column format making this a very precise and straightforward workflow process.
For me, the ability to quickly edit CSS properties by clicking on respective elements in the design view editor is the biggest advantage and real power for using Dreamweaver over notepad type editors. Without this option (when working in split mode), it requires switching back and forth between different style-sheets and code view.
Though I really like everything else I’ve seen so far, in this latest version, this seemingly small feature restriction will considerably slow down my overall typical workflow process in most cases. So, until a non-assisted CSS properties editor option is available, I’ll continue using CS6. Please, please fix this soon! Hopefully this is only a short-term oversight and resolved in a very near future update.

Problem with CSS Designer in the Panels

Hello,
I have just joined Creative Cloud, I have downloaded the newest apps. In Dreamwever I cannot see the CSS Designer in the panels. After a few ours of looking for solution for this problem (all throw Internet inclusive this Forum), I have to ask you dear helpers to help me.
So, where I can find CSS Designer in the Panels? It is not on the right side, it is nowhere.
Thank you in Advance
be-designed, Slava

Dear John,
Thank you for you answer.
I lost many ours looking for what is wrong with my CC Connect, Dreamweaver... I would suggest to Adobe to put a small info on a visible place for people to know about this.
best regards
be-designed

Design question: Scheduling a Variable-timeslot Resource

I originally posted this in general java programming, because this seemed like a more high-level design descussion. But now I see some class design questions. Please excuse me if this thread does not belong here (this is my first time using the forum, save answering a couple questions).
Forum,
I am having trouble determining a data structure and applicable algorithm (actually, even more general than the data structure -- the general design to use) for holding a modifiable (but more heavily read/queried than updated), variable-timeslot schedule for a given resource. Here's the situation:
Let's, for explanation purposes, say we're scheduling a school. The school has many resources. A resource is anything that can be reserved for a given event: classroom, gym, basketball, teacher, janitor, etc.
Ok, so maybe the school deal isn't the best example. Let's assume, for the sake of explanation, that classes can be any amount of time in length: 50 minutes, 127 minutes, 4 hours, 3 seconds, etc.
Now, the school has a base operation schedule, e.g. they're open from 8am to 5pm MTWRF and 10am to 2pm on saturday and sunday. Events in the school can only occur during these times, obviously.
Then, each resource has its own base operation schedule, e.g. the gym is open from noon to 5pm MTWRF and noon to 2pm on sat. and sun. The default base operation schedule for any resource is the school which "owns" the resource.
But then there are exceptions to the base operation schedule. The school (and therefore all its resources) are closed on holidays. The gym is closed on the third friday of every month for maintenance, or something like that. There are also exceptions to the available schedule due to reservations. I've implemented reservations as exceptions with a different status code to simplify things a little bit: because the basic idea is that an exception is either an addition to or removal from the scheduleable times of that resource. Each exception (reservation, closed for maintenance, etc) can be an (effectively) unrestricted amount of time.
Ok, enough set up. Somehow I need to be able to "flatten" all this information into a schedule that I can display to the user, query against, and update.
The issue is complicated more by recurring events, but I think I have that handled already and can make a recurring event be transparent from the application point of view. I just need to figure out how to represent this.
This is my current idea, and I don't like it at all:
A TimeSlot object, holding a beginning date and ending date. A data structure that holds list of TimeSlot objects in order by date. I'd probably also hold an index of some sort that maps some constant span of time to a general area in the data structure where times around there can be found, so I avoid O(n) time searching for a given time to find whether or not it is open.
I don't like this idea, because it requires me to call getBeginningDate() and getEndDate() for every single time slot I search.
Anyone have any ideas?

If I am correct, your requirement is to display a schedule, showing the occupancy of a resource (open/closed/used/free and other kind of information) on a time line.
I do not say that your design is incorrect. What I state below is strictly my views and should be treated that way.
I would not go by time-slot, instead, I would go by resource, for instance the gym, the class rooms (identified accordingly), the swimming pool etc. are all resources. Therefore (for the requirements you have specified), I would create a class, lets say "Resource" to represent all the resources. I would recommend two attributes at this stage ("name" & "identifier").
The primary attribute of interest in this case would be a date (starting at 00:00hrs and ending at 24:00hrs.), a span of 24hrs broken to the smallest unit of a minute (seconds really are not very practical here).
I would next encapsulate the availability factor, which represents the concept of availability in a class, for instance "AvailabilityStatus". The recommended attributes would be "date" and "status".
You have mentioned different status, for instance, available, booked, closed, under-maintainance etc. Each of these is a category. Let us say, numbered from 0 to n (where n<128).
The "date" attribute could be a java.util.Date object, representing a date. The "status", is byte array of 1440 elements (one element for each minute of the day). Each element of the byte array is populated by the number designation of the status (i.e, 0,1,2...n etc.), where the numbers represent the status of the minute.
The "Resource" class would carry an attribute of "resourceStatus", an ordered vector of "ResourceStatus" objects.
The object (all the objects) could be populated manually at any time, or the entire process could be automated (that is a separate area).
The problem of representation is over. You could add any number of resources as well as any number of status categories.
This is a simple solution, I do not address the issues of querying this information and rendering the actual schedule, which I believe is straight forward enough.
It is recognized that there are scope for optimizations/design rationalization here, however, this is a simple and effective enough solution.
regards
[email protected]

LDAP design question for multiple sites

LDAP design question for multiple sites
I'm planning to implement the Sun Java System Directory Server 5.2 2005Q1 for replacing the NIS.
Currently we have 3 sites with different NIS domains.
Since the NFS over the WAN connection is very unreliable, I would like to implement as follows:
1. 3 LDAP servers + replica for each sites.
2. Single username and password for every end user cross those 3 sites.
3. Different auto_master, auto_home and auto_local maps for three sites. So when user login to different site, the password is the same but the home directory is different (local).
So the questions are
1. Should I need to have 3 domains for LDAP?
2. If yes for question 1, then how can I keep the username password sync for three domains? If no for question 1, then what is the DIT (Directory Infrastructure Tree) or directory structure I should use?
3. How to make auto map work on LDAP as well as mount local home directory?
I really appreciate that some LDAP experta can light me up on this project.

Thanks for your information.
My current environment has 3 sites with 3 different NIS domainname: SiteA: A.com, SiteB:B.A.com, SiteC:C.A.com (A.com is our company domainname).
So everytime I add a new user account and I need to create on three NIS domains separately. Also, the password is out of sync if user change the password on one site.
I would like to migrate NIS to LDAP.
I want to have single username and password for each user on 3 sites. However, the home directory is on local NFS filer.
Say for userA, his home directory is /user/userA in passwd file/map. On location X, his home directory will mount FilerX:/vol/user/userA,
On location Y, userA's home directory will mount FilerY:/vol/user/userA.
So the mount drive is determined by auto_user map in NIS.
In other words, there will be 3 different auto_user maps in 3 different LDAP servers.
So userA login hostX in location X will mount home directory on local FilerX, and login hostY in location Y will mount home directory on local FilerY.
But the username and password will be the same on three sites.
That'd my goal.
Some LDAP expert suggest me the MMR (Multiple-Master-Replication). But I still no quite sure how to do MMR.
It would be appreciated if some LDAP guru can give me some guideline at start point.
Best wishes

Design question for database connection in multithreaded socket-server

Dear community,
I am programming a multithreaded socket server. The server creates a new thread for each connection.
The threads and several objects witch are instanced by each thread have to access database-connectivity. Therefore I implemented factory class which administer database connection in a pool. At this point I have a design question.
How should I access the connections from the threads? There are two options:
a) Should I implement in my server class a new method like "getDatabaseConnection" which calls the factory class and returns a pooled connection to the database? In this case each object has to know the server-object and have to call this method in order to get a database connection. That could become very complex as I have to safe a instance of the server object in each object ...
b) Should I develop a static method in my factory class so that each thread could get a database connection by calling the static method of the factory?
Thank you very much for your answer!
Kind regards,
Dak
Message was edited by:
dakger

So your suggestion is to use a static method from a
central class. But those static-methods are not realy
object oriented, are they?There's only one static method, and that's getInstance
If I use singleton pattern, I only create one
instance of the database pooling class in order to
cionfigure it (driver, access data to database and so
on). The threads use than a static method of this
class to get database connection?They use a static method to get the pool instance, getConnection is not static.
Kaj

Flash Builder 4 CSS Design Mode

Hello,
     I would like to know why CSS Design mode was removed from Flash Builder 4?
     I am a Design/Developer so it was much easier for me to use CSS in Design mode.
     What are my options? Is there any other tools for visual editing CSS for a Flex application?
Thanks

Hi Fernando, sorry for the delayed response. CSS Design Mode is not available for Flex 4 projects, but it is still available in Flex 3 projects. The reason for this is that designing components in Flex 4 is often a lot different, since it relies highly on the new spark skinning architecture. There is, however, an Appearance panel available in design view which supplies a set of the main inheriting styles. Setting these styles in the Appearance panel will result in assigning values to a global style selector.
I hope this helps,
Rob

How to set image border with CSS Designer?

I must be missing something obvious...
I need to set an image border. I select the image. But I don't see any relevant inline style option in CSS Designer.
It only lets me change <inline style> : td but there's no option for the image.
What am I missing?
Thanks,
Leo

Thanks John,
Yes, obviously I select the image.
However, it doesn't change anything.
I don't get the "img" selector whatever choice I select it the Sources pane.
What am I missing?

SOA real-time design question

Hi All,
We are currently working with SOA Suite 11.1.1.4. I have a SOA application requirement to receive real-time feed for six data tables from an external third party. The implementation consists of five one-way operations in the WSDL to populate the six database tables.
I have a design question. The organization plans to use this data across various departments which requires to replicate or supply the data to other internal databases.
In my understanding there are two options
1) Within the SOA application fork the data hitting the web-service to different databases.
My concern with this approach is what if organizations keep coming with such requests and I keep forking and supplying multiple internal databases with the same data. This feed has to be real-time, too much forking with impact the performance and create unwanted dependencies for this critical link for data supply.2) I could tell other internal projects to get the data from the populated main database.
My concern here is that firstly the data is pushed into this database flat without any constraints and it is difficult to query to get specific data. This design has been purposely put in place to facilitate real-time performance.Also asking every internal projects to get data from main database will affect its performance.
Please suggest which approach should I take (advantage/disadvantage. Apart from the above two solutions, is there any other recommended solution to mitigate the risks. This link between our organization and external party is somewhat like a lifeline for BAU, so certainly don't want to create more dependencies and overhead.
Thanks

I had tried implementing the JMS publisher/subscriber pattern before, unfortunately I experienced performance was not so good compared to the directly writing to the db adapter. I feel the organization SOA infrastructure is not setup correctly to cope with the number of messages coming through from external third party. Our current setup consists of three WebLogic Servers (Admin, SOA, BAM) all running on only 8GB physical RAM on one machine. Is there Oracle guideline for setting up infrastructure for a SOA application receiving roughly 600000 messages a day. I am using SOA 11.1.1.4. JMS publisher/subscriber pattern just does not cope and I see significant performance lag after few hours of running. The JMS server used was WebLogic JMS
Thanks
Edited by: user5108636 on Jun 13, 2011 4:19 PM
Edited by: user5108636 on Jun 13, 2011 7:03 PM

Workflow design questions: FM vs WF to call FM

Hereu2019s a couple of workflow design questions.
1. We have Workitem 123 that allow user to navigate to a custom transaction TX1. User can make changes in TX1. At save or at user command of TX1, the program will call a FM (FM1) to delete WI 123 and create a new WI to send to a different agent.
Since Workitem 123 is still open and lock, the FM1 cannot delete it immediately, it has to use a DO loop to check if the Workitem 123 is dequeued before performing the WI delete.
Alternative: instead of calling the FM1, the program can raise an event which calls a new workflow, which has 1 step/task/new method which call the FM1. Even with this alternative, the Workitem 123 can still be locked when the new workflowu2019s task/method calls the FM1.
I do not like the alternative, which calls the same FM1 indirectly via a new workflow/step/task/method.
2. When an application object changes, the user exit will call a FMx which is related to workflow. The ABAP developer do not want to call the FMx directly, she wants to raise an event which call a workflow .. step .. task .. method .. FMx indirectly. This way any commit that happens in the FMx will not affect the application objectu2019s COMMIT.
My recommendation is to call the FMx using u2018in Update tasku2019 so that the FMx is only called after the COMMIT of the application object.
Any recommendation?
Amy

Mike,
Yes, in my first design, the TX can 1. raise a terminating event for the existing workitem/workflow and then 2. raise another event to call another workflow. Both 1 and 2 will be in FM1.
Then the design question is: Should the FM1 be called from TX directly or should the TX raise an event to call a new workflow which has 1 step/task, which calls a method in the Business object, and the method calls the FM1?
In my second design question, when an application object changes, the user exit will call a FMx which is related to workflow. The ABAP developer do not want to call the FMx directly, she wants to raise an event which call a workflow, which has 1 step/task, which calls a method, which calls the FMx indirectly. This way any commit that happens in the FMx will not affect the application objectu2019s COMMIT.
My recommendation is either call the FMx using u2018in Update tasku2019 so that the FMx is only called after the COMMIT of the application object or raise an event to call a receiver FM (FMx).
Thanks.
Amy

Method design question...and passing object as parameter to webserice

I am new to webservice...one design question
i am writing a webservice to check whether a user is valid user or not. The users are categorized as Member, Admin and Professional. For each user type I have to hit different data source to verify.
I can get this user type as parameter. What is the best approach to define the method?
Having one single method �isValidUser � and all the client web service can always call this method and provide user type or should I define method for each type like isValidMember, isValidAdmin ?
One more thing...in future the requirement may change for professional to have more required field in that case the parameter need to have more attribute. But on client side not much change if I have a single isValidUser method...all they have to do is pass additional values
isValidUser(String username, String usertype, String[] userAttributes){
if usertype == member
call member code
else if usertype = professional
call professional code
else if usertype = admin
call admin code
else
throw error
or
isValidMember(String username, String[] userAttributes){
call member code
One last question, can the parameter be passed as object in web service like USER object.

First of all, here is my code
CREATE OR REPLACE
TYPE USERCONTEXT AS OBJECT
user_login varchar2,
user_id integer,
CONSTRUCTOR FUNCTION USERCONTEXT (
P_LOGIN IN INTEGER
P_ID_ID IN INTEGER
) RETURN SELF AS RESULT
Either your type wont be compiled or this is not the real code..

CSS Design question

Similar Messages

Maybe you are looking for