Css-file on Romote Site does not show changes

hello
I use Dreamweaver CS4 on Win7 64bit system.
I have a new website in construction and today the developer made changes to the Style.css file. Made the changes on an other computer and not in Dreamweaver.
Now, when I open the Style.css file from the Remote Site, it does not show the changes that were made. However when I delete the Style.css file in my Local Files directory and copy the Style.css file from the Remote Site to the Local Files and open it from the Local Files in Dreamweaver, it shows the new file with the changes that were made. But the Remote file keeps showing the old data.
I took several steps to try to eliminate this problem. Closing Dreamweaver and deleting the Configuration folders in Users>[NameUser]>AppData>Roaming>Adobe>Dreamweaver CS4> Both in en_US and nl_NL, although the latter did not contain any files.
This did not work. Deleted the Style.css file on my Remote Site and uploaded it again from my Local Files. Nope. Still shows rthe css-file with the old data.
Anybody any idea where Dreamweaver gets these old data from and how to make it work differently?
greetings, Lex van de Oudeweetering

Hello Ken
I did not say my page is troubled. The trouble is that the style.css file opened from the Remote Site in Dreamweaver shows the wrong data, but in effect has the right data, because when copied to the Local Files and opened from there it shows the right data.
The link to the page/site in construction is http://www.lex-illustrator.nl/lexillus
And I have made screenshots of the opend css files and assembled them beside each other.
On the left opened from the Local Files and on the right side the same css file opened from the Remote site.
The orange dots indicate where they differ, the green ones the items that were changed today. So it's not a problem of only today.
http://www.lex-illustrator.nl/2xcss.gif
And I have to say I had issues before with updating files to the Remote server and how Dreamweaver shows them. Much of the times I have to delete the Remote file first to get it dispayed right if I check if it has worked by trying to open it from the Remote server.
So it's not only limited to this site under construction. It looks like a Dreamweaver thing to me.
Greetings, Lex

Similar Messages

  • Site does not show correct on Samsung Tablet

    Hi all,
    I've seen a few questions regarding Muse sites not being displayed correct on a Samsung Tablet. My problem is similar but still different. The site is displaying correct on the desktop/ipad/iphone but not on the Samsung Tablet.
    In the previewt his is not shown. Now I also know that the preview more or less simulates how a site should look.
    This is the site: www.uwpersoonlijkeoptieadviseur.nl (a dutch site).
    I have looked at the links and they seem to be ok. I mean all the links link to the Tablet version.
    cheers,
    Larry

    Hi sanjit, the thing is that on a samsung tablet from around 3 years old the problem occurs. But on a samsung tablet almost a year /2years old the site displays correct.
    Both of them has got android 4.04
    See the image with the specs in which it loads correct.(white background)
    And here the specs of a older one (dark grey one And arround 3 years old)
    And this problem occurs:
    So on a newer tablet it shows correct.
    Verstuurd vanaf mijn iPhone
    Op 1 apr. 2014 om 17:22 heeft Sanjit_Das <[email protected]> het volgende geschreven:
    Re: Site does not show correct on Samsung Tablet
    created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
    Hi Larry
    Please let me know if there is any specific page element not showing up correctly on Tablet.
    Also which browser are you using , browser version would help. Do you see the same problem with any other browser on same tablet.
    The device details would also help.
    Thanks,
    Sanjit
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6261109#6261109
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6261109#6261109
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6261109#6261109. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • HT1937 I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed

    I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed

    i have the same problem. I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed. At this time does not changed my plan yet. I have the reference number of the bank for the transaction.
    <Email Edited by Host>

  • Background for site does not show up after uploading to webhost...

    My background for my website does not show up on my webhost after uploading site with Dreamweaver.
    Here is my site: http://legacyofys.comxa.com/
    Here is the backgroud image: http://point-file-manager.000webhost.com/index.php?ftpserver=legacyofys.comxa.com&ftpserve rport=21&username=a2022293&language=en&skin=blue&ftpmode=automatic&passivemode=no&sslconne ct=no&viewmode=list&sort=&sortorder=&state=view&state2=image&directory=%2Fpublic_html%2Fim ages&entry=Background.png
    I know the background image successfully uploaded to my webhost, because it shows up in my file manager. What is wrong here? How do I fix this?

    So it was a path issue  :-)  Glad you sorted it .
    Nadia
    Adobe® Community Expert : Dreamweaver
    Unique CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    Book: Ultimate CSS Reference
    http://www.sitepoint.com/launch/005dfd4/3/133
    http://twitter.com/nadiap

  • Edge animation on muse site does not show in IE 11

    Hi
    I made an anmation with Edge (2.01.268.25632) and published it as an oam file which was placed in Muse (7.1).on the Homepage. When published to BC everything works fine with all browsers.
    However when the site was ftp uploaded to its hosting company (not BC) the animation does not show in Internet Explorer 11. Tried HTML export instead and ftp upload with Dreamweaver without result.
    Any thoughts? Client does not want to install Chrome or Firefox Which have no problems with the animation. Thx. Henk

    Hi
    I made an anmation with Edge (2.01.268.25632) and published it as an oam file which was placed in Muse (7.1).on the Homepage. When published to BC everything works fine with all browsers.
    However when the site was ftp uploaded to its hosting company (not BC) the animation does not show in Internet Explorer 11. Tried HTML export instead and ftp upload with Dreamweaver without result.
    Any thoughts? Client does not want to install Chrome or Firefox Which have no problems with the animation. Thx. Henk

  • Site does not show up on PC in Chrome

    My site works fine on Mac/iPad/iPhone.
    Recently one user of the site reported that it does not show up in Chrome on PC.
    IE was ok, though.
    www.paus.digital
    Regards
    Mats
    Hammenhög
    Seden

    Hi,
    The site loads within 10 seconds at my end.
    The bandwidth (modem/connection speed) also plays a major role in determining the time it takes for a web page to load on your computer.
    You may also check the site performance at:
    http://tools.pingdom.com/
    Regards,
    Sonam

  • A web wiget using java acript in my web site does not show up with Firefox but does with ie; how can I fix it?

    I have inserted a java script web wiget on my web site by copy and paste. It works fine in IE (shows, updates data etc). In FFox it does not even show up and no error messages are given. If I look at the code in FFox, it is shown. Is there a problem with my web site or am I short something in FFox?

    To avoid confusion:
    *http://kb.mozillazine.org/JavaScript_is_not_Java

  • Idoc to flat file using Integration process does not show up at all

    Hello All,
    I created a scenario IDOC to Flat File using Integration Process and one without IntegrationProcess. I am able to execute the one without Integration Process easily.
    However when I send the IDOC from SAP then the Integration Process scenario just does not work.
    I Checked SXMB_MONI  There is no entry for the Integration Process.I can see entry for other without Integration Process.
    SXI_CACHE : I can see my Integration Process active
    SWEQADM :  I have activated the Event Queue and Background job
    SWF_XI_ADM_BPE :  ALL BPE is showing green status.
    All syntax check on IP are fine.
    There is no Basis Help for me so  there could be some additional basis steps which need to be configured.  Has anyone faced such an issue with Integration Process?
    Regards
    Prashanta

    Hope this might help you. when u configure an IDoc as Sender with BPM this is how you proceed.
    <b>1<b>. let us split the scenario into two</b>.</b>
    a. <b>Sender to BPM</b> ( Integration Process).
    b. <b>BPM to Receiver</b>.
    <b>2. First let us configure the first Sender to BPM.</b>
    a. Sender Agreement( <b>Not required</b> ).
    b. Receiver Agreement( <b>NOT Required</b>).
    c. Receiver Determination( Sender Service, Outbound Interface, Receiver Service(<b>Integration Process</b>).
    d. Interface Determination( Inbound Interface(Sender Abstract Interface), Message Mapping(NOT Required if your using transformation stepin Integration Process)).
    <b>3. Now let us configure the Second BPM to Receiver.</b>
    a. Sender Agreement( <b>NOT Required</b>)
    b. Receiver Agreement( Sender Service(<b>Integration process</b>), Receiver Abstarct Interface,Receiver service, Inbound Interface).
    c. Receiver Determination( Sender Service(Integration Process), Receiver Abstarct Interface,Receiver Service).
    d. Interface Determination( Inbound Interface, Message Mapping(<b>NOT Required</b>)).
    So Finally we have <b>One Receiver Agreement</b>, <b>Two Receiver Determinations</b>, <b>Two Interface Determinations</b>.
    Please let me know if you have any more queries.
    Regards
    Gopi

  • Files copied as .lnk files to usb and does not show up in Windows

    When I copy files from the MBP to a USB disk, instead of copying the files as is, the Mac converts the files into a .LNK file, which then shows up as "shortcuts" rather than the copied file in Windows. Why is this?

    same here.. it happened after installing Lion and updating iTunes
    My nano does not appear on iTunes or desktop, however it charges.
    iPod nano 2nd Gen
    Mac OS X Lion 10.7
    iTunes 10.4
    please don't tell me that Apple added my lovely nano to Black list !!

  • Master Password Feature: After sometime (10-15 min.) the drop down list for the field on any site does not show; opening new window (not refresh or new tab) drop down appears.?

    I manage a ton of accounts for different customers suing the same login pages (GoDaddy, WordPress, etc.) I use the Master Password Feature to help keep track of the many variants in logins and passwords.
    After some unknown period of time, even closing the page tab so a new page session is started at the remote server, Firefox does not provide me with the usual drop-down selection list of the previously used login names. However, if I open a new FF window (file/new window) from the menu bar, the drop down becomes available.
    How can I refresh the original window session in FF or change the timeout length?

    Well, you said LOV...that might mean you are using JDev 11g. Are you? If so what technology stack are you using?
    Assuming you are using JSF (?) you might be "backing" your list component in the application scope...but that is not likely.
    If you are using ADF/BC on your business component level, you can clear your view object from which you are querying the possible values of this list...unless your you have made a method to compile this list...in which case you know what you are doing...so that is probably not the case.
    Essentially you want to requery the VO upon which your LOV is based...unless you are using JPA or something...and then I know "requery" is not the right word...is it?

  • In the YouTube site does not show a word - Download.. - above the any video clip I chose!! Why? Is there a solution?

    When I want to carry any video clip from youtube I can not because I do not find the word - Download - On top of that section, which usually I find when I use a browser other than Firefox.

    I understand that much.  On my MAC Mini, if you look above at original post, I CAN see both OS while in the Windows 7 partition or the MAC OS.  This is NOT the case on my iMac.  Again, when in the MAC OS I can see the windows partion and move information between the two that way.  When in the WINDOWS partition, the only one that shows is the Windows OS from my computer or network.  The only way you can tell its even a MAC is the bootcamp icon in the bottom right corner of toolbar.  Both have same version of MAC OS so both should work same way..  When i double click on my computer, it should show both the Windows drive AND the MAC (as does my mini and another iMac 21.5 that i have).  This iMac does not do that - only shows windows.

  • When I use Firefox to monitor changes I do to HTML files locally, it does not show changes to images unless I restart the browser. Is this a bug?

    I have the local and the remote versions of a page open in two tabs. I change one of the images (keeping the same name in the HTML) and upload the changed image. The tab that shows the remote page only takes a refresh to show the change. The tab showing the local page not. I have tried opening it in a new window but it still does not change. Only if I restart Firefox does it show the change. Why? Is this a bug?

    grantheaslip's suggestion doesn't work for me; no change at all. (Thanks anyway.) Any other ideas? Is there another way to "hard" refresh? I don't see anything in the menu.
    Also, it seems like this is a very recent problem. I thought in the past that a regular refresh did the job.

  • Browsing for file in icon mode does not show all files and folders.

    When in Illustrator and I select open, the preview pane does not arrange the files to fit the window size. This does not happen in list mode but in icon mode. I can't see all the files and folders because they are outside of the window and I can't scroll to the right to see them.

    Yosemite, right?
    Don't use anything other than list view. It's all buggy.

  • The iWeb '08 nightmare has begun!  My ENTIRE site does not show up in iWeb!

    *Remember the whole iWeb 1.0.1 fiasco?* I think we are all gonna have to live through that again with iWeb '08. During the first fiasco, it took Apple more than 2 months to issue a fix, lets hope it doesn't take them as long this sime.
    *So my problem:* I imported my iWeb 06 domain into iWeb 08. It was a simple site with only 8 pages. Of those 8 pages, only the first page shows up in iWeb 08. All the other pages are just blank!!!!! I don't know what to do. Can someone please help me as I need to get changes to my site online ASAP!

    We had the same problem.
    Here's what we did.
    I don't think that this first step is crucial but I'll include it as it was what we did.
    1. move the Domain file from
    ~/library/application support/iweb
    to the desktop
    2. option-click on iweb application to open it
    3. select "open domain"
    4. locate the domain file you wish to open
    That's it
    This also fixed a publishing problem we were having as well
    the only issue with this "fix" is that when you open iWeb after doing this, iWeb will ask you to select a domain each time. We deleted the prefences for iweb which fixed this issue but took us back to square one regarding the sites content.
    I'd rather select the domain each time I open iWeb than be faced with a page without content
    Hope this helps

  • Create a DNG file that does not show changes when viewed by others

    I am adjusting my RAW Images in Adobe Lightroom and want to export them as DNG without betraying the evidence of my post production efforts- is there a way to save an altered file as a DNG without showing the client which changes I have made when they open and review the files in CS3 (bridge/camera raw)?

    > is there a way to save an altered file as a DNG without showing the client which changes I have made when they open and review the files in CS3 (bridge/camera raw)?
    The raw data itself is not affected by the adjustments, only the metadata. This means, that the adjustments you made are recorded in the DNG file in XMP format, which is quite clear-text, like
    > +1.0
       25
       0
       False
       Custom
         0, 0
         22, 30
         51, 68
         128, 128
         206, 149
         255, 255
    As this can be seen by anyone, who knows where and what for to look, you need to have ACR record the adjustments in XMP sidecar files (which is a better way anyway, you can archive the original file and the adjustments separate).

Maybe you are looking for