CSS font style in main template. How to remove or change...

Hi, made a boo boo the other day while messing with my spry menu bar from the main template. I was trying to change the font size on the sub-menu as the drop down had gone off the page. I was fooling around with it and inadvertantly changed/added several styles that were already being used on other pages throughout the site. For instance "style 19" used to be 24 pixels high and not in the main template. (right under spry assets styles.) Now it's there and every page that used this style is now showing VERY LARGE font as I somehow changed it to 113pixels. (type-o that I didn't realize was being saved and changing a style.)
If that made sense to anyone, what do I do now? Do I go to the main template and change the size to what I know they should be then update all the pages, leaving "redundant tags". Do I delete the style altogeter from the main template?..not sure what that would do.
and last, once I finally get it right, how do I upload these changes. Putting the main teimplate, css style sheet? Spry menu? all?
Thanks SO MUCH
Miserable in D.W. land today!

Thanks, will be working on it today. That's what I needed to know. It sucks when you don't know what your'e
doing and you can't speak intelligently to someone who does. So thanks for the layman's answer this time.
What I can do is actually go back to the page in question, and I can see the "old" style 18 and what the size should be, then see the new one. So I will be able to tell what the old size was. These styles affected are mainly for colored font/names under our caddy girls. Each one might have her name in size 24 pixel font, in a different color depending on the page design. Long story short, is all the fonts that were 18 or 19 are now wrong.. and some other styles have been messed up as well
Maybe you can help me with this one too? On 3 or 4 font styles I must have been playing with the spry menu bar and adjusting the size not realizing I was in percentage mode and not pixels. By the time I figured it out I had changed 4 styles to 12 and 13 %. So the font is tiny in D.W. Would I just delete these altogether, or change these to what pixel size they should be? Even though it will create a redundant font tag. (which I'm not too concerned about unless I need to be.) Or should I change them to 100%?
Hope you can make sense of the above. I REALLY appreciate it. Was going to make the font on "really" very big but my days of messing with fonts are over!!!!
Thanks,
ken

Similar Messages

How to remove or change the color of hair in a beard? [was:does anyone know]

how to remove or change the color of hair in a beard

There are many ways to do that and there are many free tutorials on the web for doing that in Photoshop.

How to remove or change wipe effect in MenuBar?

Does anyone know how to remove or change the default wipe
effect in Flex 3's MenuBar? I've seen several mentions online about
an openDuration property in the Menu class, but not in MenuBar. I
would greatly prefer to have either no effect or just a very brief
fade.
A solution in either MXML or ActionScript would be greatly
appreciated.
Thanks very much!
Mike Laurence

We had an old version of Dreamweaver (DW-MX) in which I have found the layer. It apears to be an image made in Photoshop.
The way I solved the problem now is that I deleted the layer in DW-MX and made a new background image. I am no pro, just an amateur
Anyway, thank you very much for your fast reply and the offer to help me out this problem.

How to remove and change the color of Java cup and border

Hi to all,
How to remove and change the color of Java cup and border.
Thanks in advance
khiz_eng

This is just an Image. You would need to create your own image and call setIconImage(Image) on your JFrame.

How to remove or change apple id rescue email address

How to remove or change apple id rescue email address
Also how to delete the iCloud id

You cannot delete your iCloud account.
iCloud IDs ending in @mac.com, @me.com or @icloud.com cannot be changed.
The rescue email address for your Apple ID can be changed here: https://appleid.apple.com/

How to remove all changes made to an image in Camera Raw -

In CS4 with latest ver. of Camera Raw, I think there is a way to remove all changes previously made to an image while using Camera Raw.
In other words after doing this the little icon in the upper right hand corner of an image in Bridge that indicates changes have been applied to an image, should be gone. Another way of asking this would be to say, how can I start all over again with the original image in Camera Raw by removing all changes prefiously made to it in Camera Raw?
TIA

Sorry, I don't know the answer to that for sure*. As a certified old geezer who avoids cluttering his mind with stuff that can easily be looked up in a menu, I stay away from keyboard shortcuts as much as I can, using only those applicable system wide, the most obvious ones in Photoshop like deselect, etc.
* However, since no such shortcut appears next to the menu command, I doubt there is one.
You could create an action and assign it a key command, though. Doh!
Never mind. That was a total brain short circuit. You can't create actions in Bridge. You'll need a script. Ask in the Bridge Scripting forum.
Message was edited by: Ramón G Castañeda

DreamWeaver Template - How to remove a border?

Hi Folks,
I'm a newbie here.
I decided to use a dreamweaver template to start my website. I want to remove the border of the template...as well as to make the Left and Right hand side "margins" the same background color as the webpage... can anyone tell me where to start on this? Thanks for the help,
Joe

For myself, the best place to learn about this sort of thing is staring you in the face... I don't like books. I find that suffering thru solving things is the best way to learn. The internet is a very good resource, and taking a course or two never hurt me, though I usually had most courses completed by the second class (I couldn't put this stuff down once I started).
Dreamweaver is just a tool...one of a few fairly decent ones. Learning how to use it is nice, but the more important things to learn are the languages of web design, which can be overwhelming to catch and keep up with. For the basics, I'd say you want to get neck deep into HTML, CSS, and Javascript.
I don't do web design on a continuous basis... my dealings are more often in the Flash realm. Other folks here may have other recommendations that may be better advice to follow. You'll probably find a few postings where someone has asked how to learn what, so look around a bit. If you don't find anything, just ask it straight out as a new posting.

How to remove or change layers in Dreamweaver CS5 made in 2004

Can somebody please explain to me how we can change the layers and remove the pictures from a website that was made with Dreamweaver 2004.
Now we have CS5 and we don't know where we can find the tools to do this. I cannot find the layer ID.
Please help!

We had an old version of Dreamweaver (DW-MX) in which I have found the layer. It apears to be an image made in Photoshop.
The way I solved the problem now is that I deleted the layer in DW-MX and made a new background image. I am no pro, just an amateur
Anyway, thank you very much for your fast reply and the offer to help me out this problem.

How to remove uncommitted changes made in a table through JAG?

Hi,
Is there any possibility to remove the uncommitted row from a Table through JAG.
For Example,
If I Click " AddRow " button in a Table and enters value for all the Attributes in that particular Row and if I click the " Cancel " Button, that newly added uncommitted row should be removed by refreshing the Particular page.
Simillarly , if i update a column in a Row and press cancel button , the uncommitted value of that column should be rollBack to its commited value(ie., to its previous value).
Thanks,

You can generate a Delete? column in the table by setting the Group property Multi-Row Delete Allowed.
Other than that, you can generate it through JAG by using custom generator templates, like described in section 4.7 of the JHeadstart Developer's Guide. You can for example drag and drop the Rollback operation of the Application Module as a button and call it a Cancel button.
Hope this helps,
Sandra Muller
JHeadstart Team
Oracle Consulting

How to remove or change default background for column chart

I've spent waaaayyy too much time trying to figure this out: when I make a column chart, the background is gray. How do I change that. What If I want white?
Thanks,
Paul

Thanks to both Jerrold and Ashka. Both answers solved my problem. Surprisingly, I never looked at the format bar, ever! I kept looking in the menus and the chart inspector; should have looked at the graphic inspector.
Thanks again, Paul

How remove (or change) children inside a JTree

hi,
I did a program where there are informations with a structure of dependence that should be showed inside JTree components.
I realized this purpose in my program .
But I am findind very difficult (after having put the information inside the JTre in the start) to show them again inside the JTrees when they are changed.
I don't know how to remove or change the informations after they are put on the children of the JTree using the methods that I found in the documentation to reach this purpose...
I need some help ...
To explain well my problem, and facilitate the helpers, I post some code that show my problem..
The program show a GUI with some JTrees.
The informations are contained in two strings, and in the GUI are also two buttons that can load the informations inside the JTree when they are clicked.
Thank you in advance
regards
tonyMrsangelo
public class JTree_TryToUseIt_ChangingNodes extends javax.swing.JFrame {
    private PanelFulViewConteiner jPanelFulViewConteiner;
    Dimension dimPrefArcPanels = new Dimension(910, 150);
    Dimension dimMinArcPanels = new Dimension(700, 100);
    Dimension dimPrefSemiArcPanels = new Dimension(850, 140);
    Dimension dimMinSemiArcPanels = new Dimension(550, 90);
    Dimension dimPrefBodyXpicPanels = new Dimension(900, 150);
    Dimension dimMinBodyXpicPanels = new Dimension(700, 150);
    Dimension treePrefDim = new Dimension(90, 110); //
    Dimension treeMinDim = new Dimension(60, 110);
    PanelToShowTrees panel_trees;
    public JTree_TryToUseIt_ChangingNodes() {
        getContentPane().setLayout(new GridBagLayout());
        GridBagConstraints gBC = new GridBagConstraints();
        jPanelFulViewConteiner = new PanelFulViewConteiner();
        gBC.gridx = 0;
        gBC.gridy = 0;
        gBC.gridwidth = 10;
        add(jPanelFulViewConteiner, new GridBagConstraints());
        gBC.gridx = 0;
        gBC.gridy = 1;
        gBC.gridwidth = 10;
        pack();
        panel_trees = this.jPanelFulViewConteiner.jPanelFulContainerTop.panelToShowTrees;
        setDefaultCloseOperation(EXIT_ON_CLOSE);
        setLocation(50, 50);
        setVisible(true);
    private void fillTrees(String[] strings) {
        collapseTrees();
        removeNodes();
        for (int index = 0; index < strings.length; index++) {
            DefaultMutableTreeNode dmt = new DefaultMutableTreeNode(strings[index]);
            String knotStr = strings[index].substring(0, 1);
            int knot = -1;
            try {
                knot = Integer.parseInt(knotStr);
            } catch (NumberFormatException e) {
            panel_trees.root_Node[knot].add(dmt);
            panel_trees.validate();
            panel_trees.repaint();
        collapseTrees();
    void collapseTrees() {
        for (int i = 0; i < 8; i++) {
            panel_trees.jTree.collapseRow(0);
panel_trees.jTree[i].expandRow(0);
panel_trees.validate();
panel_trees.repaint();
void removeNodes() {
for (int i = 0; i < 8; i++) {
panel_trees.jTree[i].removeAll();
panel_trees.validate();
panel_trees.repaint();
public static void main(String args[]) {
JTree_TryToUseIt_ChangingNodes xx = new JTree_TryToUseIt_ChangingNodes();
class PanelFulViewConteiner extends JPanel {
PanelFulContainerTop jPanelFulContainerTop;
PanelFulContainerBottom jPanelFulContainerBottom;
public PanelFulViewConteiner() {
GridBagLayout gbl = new GridBagLayout();
this.setLayout(gbl);
GridBagConstraints gBC = new GridBagConstraints();
jPanelFulContainerTop = new PanelFulContainerTop();
gBC.gridx = 0;
gBC.gridy = 0;
add(jPanelFulContainerTop, gBC);
jPanelFulContainerBottom = new PanelFulContainerBottom();
gBC.gridx = 0;
gBC.gridy = 2;
add(jPanelFulContainerBottom, gBC);
class PanelFulContainerTop extends JPanel {
PanelToShowTrees panelToShowTrees;
public PanelFulContainerTop() { // costruttore
this.setMinimumSize(dimMinArcPanels);
this.setPreferredSize(dimPrefArcPanels);
setLayout(new FlowLayout());
panelToShowTrees = new PanelToShowTrees();
add(panelToShowTrees);
}// costruttore
class PanelFulContainerBottom extends JPanel {
JButton but1 = new JButton("load string1");
JButton but2 = new JButton("load string2");
String[] str1 = {"0-AAA", "0-BBBBBB", "2-CCCCC", "2-DDDDDD", "2-EEEEEEE", "5-FFFFFF", "5-GGGGGG", "5-HHHHHH", "7-IIIIII", "7-KKKKKKK", "7-LLLLLL", "7-MMMMMM"};
String[] str2 = {"0-aaaaa", "0-bbbbb", "0-cccc", "2-ddddd", "2-eeee", "3-ffffff", "3-gggggg", "3-hhhhh", "4-iiiiii", "4-kkkkk", "7-lllllll", "7-mmmmm", "7-nnnnn"};
public PanelFulContainerBottom() {// costruttore
this.setMinimumSize(dimMinArcPanels);
this.setPreferredSize(dimPrefArcPanels);
add(but1);
but1.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
fillTrees(str1);
add(but2);
but2.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
fillTrees(str2);
class PanelToShowTrees extends JPanel {
JScrollPane jScrollPane[];
JTree jTree[];
DefaultMutableTreeNode[] root_Node;
public PanelToShowTrees() {
this.setMinimumSize(dimMinSemiArcPanels);
this.setPreferredSize(dimPrefSemiArcPanels);
setLayout(new FlowLayout());
jScrollPane = new JScrollPane[8];
jTree = new JTree[8];
root_Node = new DefaultMutableTreeNode[8];
for (int i = 0; i < 8; i++) {
root_Node[i] = new DefaultMutableTreeNode(" " + (8 - i));
jTree[i] = new JTree(root_Node[i]);
jScrollPane[i] = new JScrollPane();
jScrollPane[i].setViewportView(jTree[i]);
add(jScrollPane[i]);
jScrollPane[i].setPreferredSize(treePrefDim);
jScrollPane[i].setMinimumSize(treeMinDim);
jTree[i].addTreeSelectionListener(new TreeSelectionListener() {
public void valueChanged(TreeSelectionEvent e) {
showContentOfTheTree(e);
private void showContentOfTheTree(TreeSelectionEvent e) {
String stringaGotFromEvent = e.getPath().toString();
JOptionPane.showMessageDialog(rootPane, "found =---> " + stringaGotFromEvent);

hi Andre,
thank you for answering me.
I have not much practice with JTrees so I find some difficulty to use it...
After I got your advice, I made changed a little the design of my program..
This it is a program for management of a dentist office, and I would show in 8 JTrees (every jTree root represents the teeth in a dental arch) the treatments that each tooth got.
How I said, the 8 JTree roots are representing the teeth, and in this architecture the problem is:
- to add a node to a tree root to indicate a treatment for that tooth;
- to delete all the children from a jTree root before beginning to add new child, before writing again treatments, when the informations are changed.
Following your help, I made this two functions to reach this purpose:
private void assingTreatmentToTooth(int toothNmbr, String strTreatment) {
        DefaultMutableTreeNode newChild = new DefaultMutableTreeNode(strTreatment); // new treatment to add
        DefaultTreeModel model = (DefaultTreeModel) panel_trees.jTreeXdentalRoots[toothNmbr].getModel(); // get model for the root Tree
        DefaultMutableTreeNode parentNode = (DefaultMutableTreeNode) model.getRoot();
        model.insertNodeInto(newChild, parentNode, 0); // always assign 0 as first node
    } // assingTreatmentToTooth()
private void removeTreatmentFromAtooth(int toothNmbr, int childNmbr) {
        DefaultTreeModel model = (DefaultTreeModel) panel_trees.jTreeXdentalRoots[toothNmbr].getModel(); // get model for the root Tree
        DefaultMutableTreeNode child = (DefaultMutableTreeNode) model.getChild(model, childNmbr);
        model.removeNodeFromParent(child);
    } // removeTreatmentToTooth()when the second function is executed, I get this error:
Exception in thread "AWT-EventQueue-0" java.lang.ClassCastException: javax.swing.tree.DefaultTreeModel cannot be cast to javax.swing.tree.TreeNode
at the line : DefaultMutableTreeNode child = (DefaultMutableTreeNode) model.getChild(model, childNmbr);
DefaultMutableTreeNode child = (DefaultMutableTreeNode) model.getChild(model, childNmbr);
could you tell me what is wrong ?
regards
TonyMrsangelo

How to change the font style

Hi All
I am able to dispaly the content of a .txt file on the screen using inline frames(11g webcenter application using content repository- file system) . But 'm able to add styles to it like displaying it in bold letters. Any help on how to add templates
Ex: Consider a file Sample.txt file contains the text – “Hello World. Welcome”
• Display “Hello World” in bold and display “Welcome” underlined
Link which i followed http://download.oracle.com/docs/cd/E12839_01/webcenter.1111/e10148/jpsdg_content.htm
8.3.1 How to Add Content as an ADF Inline Frame
code
<af:inlineFrame id="inlineFrame1"
source="/content/conn/Test/path/test1/Test.txt"
inlineStyle="height:100px; color:Aqua;"
styleClass="AFStretchWidth">
</af:inlineFrame>
Thanks,
Tim.

Hi Romeo,
I got your point and class I require to apply is as below:
.ms-contactcardtext3 {
font-family:
Arial !important;
font-style: italic !important;
Thank you for your trick :)
But its getting apply to title as well as to Department - as above class is same for both fields , while I require to change the style only for the department.
Any suggestions ? I have changed the same using Designer which works as per the need , however - I dont want to use SPD Tool !!!
Bottom line : I Require different font style in Title and Department without use of SPD.
Any suggestions/idea ?
Thanks and Regards,
Dipti Chhatrapati

How to discover all available font styles for a given family?

I'm using InDesign CS3 and need to discover all of the available styles for any given font. I've found Application.Fonts.itemByName(), but this only returns a single font by the full name. Using ExtentScript in CS3 How can I ask for ALL font styles for any given font family (as displayed in the styles drop-down?)
Thanks!

hey,
I was just searching the web trying to find why this piece of code:
for (var i = 0; i <app.fonts.length;i++) {
app.fonts[i]..... some other code
take 4+ minutes to execute.
app.fonts.everyItem().getElements(); did the trick, sweet!!
However, I would like to ask you whether you know if there is some handout or some guide (possibly online page) for such advanced scripting...
or how did you find this solution?
thank you very much for this post, anyway
regards
jenda

Does anyone know how to select text in Appleworks, click on the font button and then be able to scroll thru all the font so that one can see the text change as you scroll down the list, at present I have to do it one font style at a time and then repeat

does anyone know how to view text in Appleworks, to be able to click on the font button and then be able to scroll thru all the font so that one can see it change as you scroll down the list, at present I have to do it one font style at a time and then repeat? Thanks jl

Welcome to the Apple forums
Your question really belongs in the AppleWorks community/forum.
You can turn on fonts in actual type in the AppleWorks preferences.

How can I select and enlarge the entire doc,ge on a page, reducing the surrounding boarder. I can move the difference text boxes about independently of each other but the outer most boarders of the main template block appear to be fixed.

How can I select adn enlarge the entire document/image on a page, reducing the the surrounding boarder? I can move the different text and image boxes around independently of each other but the outer most boarders of the main template block appear to be fixed. I thought I would be able to enlarge or reduce my document from 'page layout' but this does not seem possible.

Inspector > Document > Document Margins
The word is border. Boarders are the Harry Potters of this world.
Peter

CSS font style in main template. How to remove or change...

Similar Messages

Maybe you are looking for