CSS for BI Platform

Hi there,
I know what when we open Design Studio in local mode, it lets me open repository folder and put CSS file in there. I can then use the classes defined in the same CSS in my Design Studio application.
When I open Design Studio in SAP BI Platform mode, where do I need to place the CSS file ?
Same with HANA and BW, which is the place for CSS ?
Regards,
Tejas

Tejas,
See David Gyurasz step by step on how to load CSS to the BI platform here: mmie object not found
It is very good - I recommend following his steps.
Tammy

Similar Messages

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective.

My Macbook Pro Won't boot. Unable to find the driver for this platform

Hi there,
After doing some casual internet browsing earlier today (facebook + twitter etc) my laptop froze up. While I was able to click between windows, the ever faithful beach ball was there to ensure I couldn't really do anything, including making the dock appear when mousing towards the bottom. So I held down the power button to shut it down, and restarted. After the apple logo had sat there for quite some time I got a message something along the lines of:
Unable to find driver for this platform:\"ACPI\".In"@/SourceCache/xnu/xnu-1699.32.7/iokit/kernel
This was followed by a message telling me I needed to restart my computer using the power button. After several attempts all producing the same results, I was still in the same boat. So I sought some online help which lead me to boot into my recovery partition (holding down the option key at startup) and install the operating system again from there. However this is when I really started to panic. After selecting the recoverey partition the apple logo flipped between a no access symbol (that circle with a line through it) and the apple logo for a couple of seconds, before settling on the apple logo. But the recovery partition never loads and after some time I either get a symbol of a folder with a question mark in it or I similar message telling me to restart.
Next I tried plugging in my external hard drive with a few time machine backups as well as a carbon copy back up and another recovery partition. Using the external HD's recovery partition took me to a menu which the online help had initially promised where I could reinstall osx as well as use disc utitlity. So I tried to run the installer from here only to find my hard drive didn't show up in the list of destination volumes. The time machine and recovery partitions from my hard drives did, but I couldn't select these.
I then turned my attention to the disc utility and tried to repair my hard drive. I was unsure which one to select at first because there were two names for my hard drive; the first being the hard drives actual name (a samsung something or other) and the second was called 'Lion.' I started by repairing the samsung one and this was over in a few seconds saying it was successfully repaired. So I moved on to 'Lion' and this took a few moments, before stalling on a section saying "Updating boot support partitions for the volume as required." I was also advised to recover any data I could and restore I backup.
So that's where I'm currently at. I'd really hate to lose any recent data, as my last time machine back up was about a week ago and I'd made some substantial progress on a mix since then!
I'd really appreciate any help that anyone can offer,
Cheers!

Just had another look in the disc utility and found that the samsung's partition scheme is set to master boot record, which is apprently used for windows partitions? I've no idea how this happend because When I originally formatted the drive I'm sure I would have set it to GUID partition table. Clicking on 'Lion' just gives dashes for the partition type, capacity and available space values.

I have Firefox 5.0.1, and a theme I want to download says that it works with Firefox 4.0b9pre - 7.0a1, but at the top it says that it is not available for my platform. What do I do?

I just downloaded Firefox 5.0.1, and one of the themes I want to download and try out says that it works with Firefox 4.0b9pre - 7.0a1. At the top, though, it says that the theme is not available for my platform. It has happened with some other themes as well, but I didn't check what versions they work with. I don't know what this means or what to do about it. The theme is at this link: https://addons.mozilla.org/z/en-US/firefox/addon/bloomind-ft-deepdark-2/

It says:
<blockquote>"Bloomind FT DeepDark 2" is a theme that has been created to transform the look of Firefox 4 for Windows users. It has been specially designed for Seven, but rendering is relatively accurate on XP and Linux (I can t test it on MAC, but for those who would like to try it anyway on that platform, you can force download and install it).</blockquote>
So try to save that file via the right-click context menu.
*http://kb.mozillazine.org/Themes

After trying to install update on MacAir error message and then message saying panic (cpu caller 0xffffff800a859241): "Unable to find driver for this platform: \"ACPI\".... I'm worried as all of my work is on my computer and I'm afraid I will lose it all.

I am totally worried I am going ot lose all my data after trying to install update on MacAir. Cannot do anything error message saying panic ....."Unablet o find driver for this platform."

Hi Guys
No good news I'm afraid. I have been through ALL the system caches and files that were updated at the time of said issue. Reset - rebuild and even gone back to my TimeMachine copy from earlier this AM. Nothing! Can only assume it is something deeper in the /usr or var or private folders.....
I have cloned the system and core files (/usr, /private) etc etc to an external HD and it still recreates the fault. I am afraid to say I have no more time at the minute to look at so have put my machine back to 2 hours prior via my TimeCapsule.
I the absense of anyone else or, indeed, Apple fixing in the next 12 hours, will get back onto it from the cloned copy I have kept and see if I can find the offending file/files...
Sorry I don't have an immedaite solution.

How Do I Use a SINGLE Custom CSS for My Project?

How do I set a single CSS for a project?
Currently, I have linked (I checked, they are actually linked) FM files. The project is Responsive HTML 5 Single Source Layout. It is set up this way:
Project Files
Each FM file has a folder that contains a CSS, an FPJ, any baggage (PNG, for example) and an HTM.
So, for my project, I have 31 such folders.
Above them is RHStyleMapping.css.
That's it
To map my project to a custom CSS, I did this:
1) Created the custom CSS (let's call it TheSingleCSS-sb01.css) and put it in the same location as RHStyleMapping.css.
2) Right-clicked Responsive HTML5 (Primary Layout) in the Single Source Layouts pane.
3) Selected Properties. The Responsive HTML5 Properties dialog box opens.
4) Click Content, select the Apply to all Topics check box, select CSS, and choose my CSS, TheSingleCSS-sb01.css.
5) Click Save and Generate. Generating happens.
6) When prompted, click View Result.
7) Double-click one of the resulting topics, and choose the HTML tab.
8) Notice the following CSS files are referenced, NOT the one I want:
<link rel="stylesheet" href="Configuration_ChangeWorkflow.css" type="text/css" />
<link rel="stylesheet" href="..\..\RHStyleMapping.css" type="text/css" />
<image>
So:
1) How can I replace 32 individual CSSes with one single custom CSS?
2) Also note that Project Manager does not display my custom CSS, even though it is in the same location as RHStyleMapping.css and referenced in the Properties dialog box.
Thanks all,
Sean

Hi, so as I mentioned before, I have used Apply to all and this doesn't work. The resulting HTML still uses a specific CSS for that one HTML file.
1) I put the CSS I want to use, Sean01.css, in the top level of my project using Windows Explorer.
2) I Save and Generate.
3) But, my settings for styles in the CSS are not used. For example, FM_GlossaryDefinition is defined with a 0 left indent but actually uses a 144pt indent (that mirrors the print FM document and that I do not want).
4) And, you can see from the actual HTML, that the Sean01.css file that I applied to all topics (see the first image) is not referenced. What am I doing wrong?
What am I doing wrong? Again, these are imported FM files; this is not linked.
Thanks,
Sean

Trying to dynamically load CSS for project at compile time via config XML file to select CSS file.

I'm using the same code base to compile different versions of a project. Each project has different base fonts. I've created multiple css files that use the same style names. The idea being that in the code I reference the style names, then the loaded CSS determines which font (and size, color, etc) is used for each style name.
The CSS files are compiling to SWFs, and those SWFs are referenced in config.xml files. Before compiling, I select the config file to use.
I am loading the CSS SWF files via the StyleManager in the Application.mxml, like so:
styleManager.loadStyleDeclarations( _contentData.elements( 'cssPath' ).@path )
The path traces out correctly as:
assets_embed/styles/project2.swf
For some reasone I must include an fx:Style line in the Application.mxml file or no fonts are recognized. Example:
<fx:Style source="assets_embed/styles/project1.css"/>
If I reference the css for project one (as done above) then most, but not all, styles work. Some styles reference the fonts from the project 1 css, others properly use fonts from project 2 swf. If I point to the CSS for the project I'm compiling in the <fx:Style > tag then all fonts work, but that defeats the goal of using XML rather than code to identify the styles.
So, why do I need the fx:Style line if the css is being loaded via StyleManager?
Why is there "cross talk" between style definitions?
Is there a better way to select styles at compile time?

I read this quickly so I might have missed a detail. I think your describing an issue with recent Flex releases that is described in the fine print somewhere. If you don't have any fonts embedded in the main app and are only bringing in fonts embedded in CSS SWFs, you have to force-link the EmbeddedFontRegistry by adding something like this to the main app's script block.
import mx.core.EmbeddedFontRegistry; EmbeddedFontRegistry;
(Yes, "EmbeddedFontRegistry" is in there twice, once to define the fully qualified name, the other to create a class dependency to force the linking).

Driver Not Intended For This Platform,,,,,,,,

well, i have windows vista home premium, and so does my dad and my ipod works on his comp so W.T.F!! is wrong with mine!? whenever i try to install the drivers for my ipod 80gb classic it tells me that the drivers were not intended for this platform.
so what do i do?
Message was edited by: tiederian

Are you running 32-bit Vista or 64-bit Vista? What about your father? I understand there have been issues running iTunes / connecting an iPod on the 64-bit version. If you do a search for "vista 64 bit" (search is in the upper right), you'll see threads related to this. I run XP, so I haven't really been paying much attention to the Vista related threads. Sorry I can't be of more assistance.

New SpryWidget .CSS for a New Page

I have the whole spry arsenal of files on a website in a separate folder. I am already using several widgets and functions from that and among others also a "spry collapsible panel" widget on one of the pages.
Now, I would like to use it once again on a new page (on the same site), but when I insert the widget it gives me the same SpryCollapsiblePanel.css as the one already used for the previous widget. But I want to give the panel a different look and feel as it has some other purpose on the new page.
What is the correct procedure to get a fresh untampered "SpryCollapsiblePanel.css" for the new widget on a new page?
Thank you!

I notice (finally got the page!) that the lowest element in the 'drop up' menu overlays the main menu title...a byproduct of needing perhaps one more item's height in margin-top negative pixels!
I suppose it is a small consolation, but IE 8 seems to be rendering the menus accurately, with the sub-submenus flying out relative to their own submenus.
The only workaround that comes to mind (for all the other browsers out there) is to set up new classes to apply to subsubmenus:
ul.MenuBarHorizontal ul /*this is the usual markup; you can leave this in */
 margin-top:-177px;
 padding: 0;
 list-style-type: none;
 font-size: 100%;
 z-index: 1020;
 cursor: default;
 width: 160px;
 position: absolute;
 left: -1000em;
/*add the following, to offset the top margin by multiples of the height of a single item */
ul.MenuBarHorizontal ul ul.three {margin-top: 90px;}
ul.MenuBarHorizontal ul ul.two {margin-top: 60px;}
ul.MenuBarHorizontal ul ul.one {margin-top: 30px;}
For instance, the Ladakh Treks subitems want to offset from the top 30px to align with their parent, Ladakh Treks, so I use the <ul class="one"> to drop that sublist 30px down from the top of the container.
<li><a tabindex="-1" href="http://www.artcraftemporium.com/preview_wildvent/treks.html" target="_blank" class="MenuBarItemSubmenu">Ladakh Treks</a>
 <ul class="one">
 <li><a tabindex="-1" href="http://www.artcraftemporium.com/preview_wildvent/stok_kangri_exp.html" target="_blank">Stok Kangri Expedition</a></li>
 <li><a tabindex="-1" href="http://www.artcraftemporium.com/preview_wildvent/markha1.html" target="_blank">Markha Valley</a></li>
 </ul>
</li>
This solution does not work in IE8, which had already worked the way you intended without monkeying around with the top margin. I don't know how it works in IE7.
I have not used conditional markup (I know there are people out there who have, and you could research it!), but one could attempt to put a conditional markup around those class definitions in the stylesheet that would not call on them when your site encounters IE8.
Beth

I have a Macbook pro 4,1 My Battery would not charge after only 23 cycles. I tried the battery update now my macbook will not boot. it has a kernel panic Unable to find driver for this platform:

Macbook 4,1
Early 2008 15" macbook pro
Running Snow Leopard
the Battery was not working after only 23 cycles
I tried the Battery update and now it will not boot at all
I really do not want to loose my data on the drive
panic message is
Unable to find driver for this platform: "ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
Please help

Panic Message
panic(cpu 0 caller 0x000x563ebd) : Unable to find driver for this platform:
"ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
Debugger called: <panic>
Backtrace (CPU 0), Format - Frame : Return Address (4 potential args on stack)
(7 lines of hex)
BSD Process name corresponding to current thread: Unkonwn
Kernel version:
Darwin Kernel Version 10.8.0" todays date ; root:xnu-1504.15.3~1/release_I386
I tried to boot from CD can, but i dont want to loose any information.
Tried disk tools
Hardware test
Tried to check if it was memory sticks failing or battery , nothing else plugged in
if i boot holding Apple key and S
I get additional warnings about AppleACPIPlatform and not being able to load Kext

Kernel Panic: Unable to find driver for this platform

So, my 1 GM RM, 1.5 GHz Powerbook G4 (15 inches) has been behaving wonderfully lately. Until, this morning, it locked up -- as it sometimes does -- after inserting a 3rd party SATA card and waking it from sleep.
This is normally not a problem. A reboot gets things back on track. Not today. The reboot stayed on the grey screen with the white apple logo. I tried booting off of a Disk Warrior CD and an OS X 10.4 install DVD. I go this kernel panic:
Unable to find driver for this platform: "PowerBook5,6".
But...and here's the best part...if I boot into target disk mode and hook the computer up to another similar Powerbook we have, the similar PowerBook boots fine using my drive.
So, it seems to be a hardware problem with my PowerBook. Any ideas on how I narrow it down?
Thanks,
Gary

Glad you found your problem. Our kernel panic on our 15" G4 is a bad logic board. $500+ to fix it. Just found out yesterday.
JWTech

Where can I get window os 2003 for unity 5.0(1) for MCS7835I1 platform?

Dear All,
I didn't receive any DVD on window os 2003 for unity 5.0(1) for MCS7835I1 platform for my purchase.
I only have got the IP Telephony OS 2003.1.1 which stated in the document that it is not for Unity.
So I tried to open case to TAC but they asked us to look from Microsoft but I believed that normal window os will not be able to install on MCS sever, am I right? So where actually can I look for this window os?
Thanks in advance
Jarunee

Hi Jarunee,
You have 2 options:
1) You purchased the MCS-7835-I1-ECS1, I would expect this one to come with the platform configuration disk (PCD). If you did not get this you will need to contact customer service as outline in this document
2) You purchased another flavor of this server model such as MCS-7835-I1-IPC1 or directly from IBM. This will not come with the PCD. For this you will not get a PCD and you will need to supply the operating system yourself.
The installation guide covers both scenarios to set up Unity either with PCD or self supplied OS.

Java Swing/AWT and FX is so old school! Give me HTML and CSS for GUI!

Dear Java,
I am a seasoned programmer and I feel it's time JAVA implements a GUI system where it uses HTML and CSS for the GUI. For the love of god just look at the interfaces you can make using HTML and CSS alone. I am a big fan of Java Swing and the recent GUI designer for FX is quite cool. But they are just not as simple as HTML and CSS. And JavaFX has some interesting requirements for the graphics.
I know it is possible to use JavaFX and implement the WebView/WebDriver and make it load a HTML page, etc... but why go through all the trouble?
Just imagine... if you make Java where it has powerful back-end to do what it does best and the HTML/CSS powered GUI on the front-end. It will make the lives of many developers much much easier.
I am not sure whether a Swing designed GUI will be faster than a HTML designed GUI... but if you look at a traditional browser and how fast it renders HTML/CSS, I am sure if Java had a native Form where it uses HTML and CSS to render the GUI, Java will make the dreams of many programmers a reality.
Make it happen!!!!

Check this i solve problem just now using this
https://wiki.archlinux.org/index.php/Ja … ow_Manager

Deleted CSS for Horizontal Menu Bar. Help!

I deleted the css for my spry horizontal menu bar and now when I try to upload it into a new page it is distored. I added back the css rules for the menu bar and it helped but I cannot get the menu bar to line up horizontally like it was originally. The bars are vertically staggered across the page. Can anyone help me with the css settings to get the menu bar back to normal?
Thank you
Teresa

Hello Teresa,
we should not resign ourselves. I for my part, I'm very "happy" with my DW, particularly you/we find here many unselfish helpers! What concerns your "way to build website an easier way" I'll propose DW itself (see screenshot of my German DW):
or many of interesting templates (Google is your friend) and here my favorite are these of Nancy O.:
http://alt-web.com/Free-CSS-Templates.shtml.
And I want to reoeat my hints from above:
If you have a budget to work with, look at PVII's Pop-Menu Magic3.
http://www.projectseven.com/products/menusystems/pmm3/index.htm
jQuery Superfish (free): http://users.tpg.com.au/j_birch/plugins/superfish/ aso.
Good luck!
Hans-Günter
P.S.
And whether you use DW or other programs, sooner or later you have to become familiar with CSS and html aso.

CSS for Dynamically Loaded External Text

I'm externally loading text from a .txt file. I need to format that file using CSS. I've got the CSS file set up and everything. I've tried every tutorial I can find to try and load the CSS, but nothing is working.
Here is the script for loading the text:
var textLoader:URLLoader = new URLLoader();
var textReq:URLRequest = new URLRequest("content_files/commissions.txt");
textLoader.load(textReq);
textLoader.addEventListener(Event.COMPLETE, textLoadComplete);
function textLoadComplete(event:Event):void
 commissionscontent.htmlText = textLoader.data;
 commissionscontent.htmlText = textLoader.data.split("\r\n").join("\n");
 if (commissionscontent.maxScrollV <= 1){
 scrollBox_mc.visible = false;
 scrollLine.visible = false;
 else {scrollBox_mc.visible = true;
 scrollLine.visible = true;}
Can anyone help me to load the CSS for this?? I'm really new to Flash and have just been teaching myself, except for now I've hit a wall and I am so incredibly frustrated that it's not even funny.

var css_loader:URLLoader = new URLLoader();
var textLoader:URLLoader = new URLLoader();
var my_css:StyleSheet = new StyleSheet();
var my_txt:TextField = new TextField();
css_loader.load(new URLRequest("style.css"));
css_loader.addEventListener(Event.COMPLETE, onCSSComplete);
function onCSSComplete(e:Event):void {
 my_css.parseCSS(e.target.data);
 textLoader.load(new URLRequest("commissions.txt"));
textLoader.addEventListener(Event.COMPLETE, textLoadComplete);
function textLoadComplete(e:Event):void {
 my_txt.styleSheet=my_css;
 my_txt.htmlText=e.target.data;
 addChild(my_txt);
 my_txt.width=300;
 my_txt.autoSize=TextFieldAutoSize.LEFT;
 my_txt.wordWrap=true;

CSS for BI Platform

Similar Messages

Maybe you are looking for