CSS load balance - Lock Outlook 2007 - RPC over http
I have problema whit load balance for configuration of client Outlook 2007. (using protocol RPC over http). Through the CSS, after a period of utilization, the Outlook lock. And without the CSS doind load balance, no ocurred the problem.
I appreciate any help.
Thanks!
Jason,
CSS is not created in a source group of "exchange2007rcvir. Is that the problem is that?
**** OWNER ****
content exchange2007rcvir
vip address 10.58.32.123
add service scmt801cto
add service scmt801cas
redundant-index 205
protocol tcp
advanced-balance sticky-srcip
sticky-inact-timeout 30
active
content exchangehtvir
vip address 10.58.32.89
add service scmt700cto
add service scmt700cas
redundant-index 201
protocol tcp
advanced-balance sticky-srcip
sticky-inact-timeout 30
active
content exchangewavir
vip address 10.58.32.33
add service scmt800cto
add service scmt800cas
redundant-index 51
protocol tcp
advanced-balance sticky-srcip
sticky-inact-timeout 30
active
***** GROUP *****
group exchangehtvir
add destination service scmt700cto
add destination service scmt700cas
vip address 10.58.32.91
active
group grp_axiavir
vip address 10.58.32.83
add destination service scxt393cas
add destination service scxt394cas
add destination service scxt395cas
add destination service scxt393cto
add destination service scxt394cto
add destination service scxt395cto
active
** No have exchange2007rcvir
Similar Messages
-
Trial SAN Certificate & Outlook Anywhere (RPC over HTTP) test fail
I am testing exchange 2013 where autodiscover pass while performing Outlook Anywhere (RPC over HTTP) connectivity test failed with invalid SSL certifiate . I am only using self certifiate .do any one idea if any CA provding SAN certificate trial basis.
Don't forget to mark helpful or answer
connect me :-
http://in.linkedin.com/in/satya11
http://facebook.com/satya.1000Hi,
Agree with the above suggestion, ExRCA test cannot pass with self-signed certificate. And to ensure Outlook Anywhere work well , we need to install the self-signed certificate on all clients machines.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support -
Outlook 2010 RPC over HTTP to Exchange 2003 users remain disconnected after login
Greetings Guys,
I am unable to find a solution, Windows 2003 DC, Exchange 2003, all user were working great, RPC over HTTP, until Tuesday at about the same time perhaps before the MS update KB3002657
all remote users using outlook 2010 did not have authentication popups as was noted from this KB. But instead all login successfully, ( looking at the security logs in the exchange) , but all are remaining disconnected, immediately after login.
The users had already been configured with the registry DefConnectOpts RPC key, so I doubt their Outlook profiles are the problem.
I suspect the DC's ( we have 2 ) or the exchange have picked up an issue. I am out of ideas.
Any help would be awesome
BarryHi,
According to your description, I understand that Outlook(Outlook Anywhere) client display disconnected after install MS update KB3002657.
If I misunderstand your concern, please do not hesitate to let me know.
KB3002657 is a security update to prevent attacker logging on to a domain-joined system and being able to monitor network traffic. More details about this update, please refer to:
https://technet.microsoft.com/library/security/ms15-027
For your question, please try to reconfigure a Outlook profile for testing.
If it works, you can try to below steps to pop sign in page in Outlook client:
1. Open Outlook---> File and click “Account setting”, then select account name and click “Change”.
2. Click “More settings”, switch “Security” and check “Always Prompt for logon credentials”。
3. Restart Outlook to login your account.
Once this done, you can uncheck this setting for convenience.
Besides, I find an similar thread about your question, for your reference:
https://social.technet.microsoft.com/Forums/exchange/en-US/7199811f-ee41-4b81-aafe-698bdb5a0b49/recently-outlook-cannot-auth-username-and-password?forum=exchangesvrclients
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support -
Problem with WLIOTimeoutSecs in weblogic and apche CSS load balancer
Hi,
We are using Weblogic 11g, apache 2.2 and CSS load balancer for load balancing.
we have huge reports which take minutes to generate and hence we need higher value for WLIOTimeoutSecs. This works fine when we use server url but WLIOTimeoutSecs is not working when we use CSS load balancer.
We checked with our load balancing team they said CSS load balancer will not repost the request.
Here is the plugin configuration
<Location /*****>
SetHandler weblogic-handler
PathTrim /
WebLogicHost 'serevrip'
WebLogicPort 'port'
WLIOTimeoutSecs 3600
Idempotent OFF
WLProxySSL ON
DefaultFileName /***/***/index.jsp
Debug On
WLLogFile /***/***/***/***.log
</Location>
Could some please help me on this.
Thanks in advance
Regards,
VenkatHi Tarun,
The problem occurs when the SSL is enabled on apache. If I access the same URL over HTTP, the parameter WLIOTimeOut works fine.
Also I observed that, none of the parameters are getting applied to the plugin. I had switched on 'DebugConfigInfo'. With this the HTTP URL with ?__WebLogicBridgeConfig as query parameter returned the complete configuration. However when accessed with HTTPS the server did not return the configuration.
Is there a specific configuration to be applied when apache is used with SSL?
Thanks for your help,
Shashi -
Why does Outlook 2010/2013 tries to connect by rpc over http in LAN?
Hi All,
I have Exchange 2010 (Two CAS) Published by TMG (Basic Authentication). Also outlook anywhere is configured with Basic Authentication.
Some users have issues with "authentication prompt" (randomly). By the way, Outlook Clients(2007/2010/2013) are fully updated.
What I can see when "authentication prompt" shows up, Outlook tries to connect by rpc over https.
Is this a normal behavior?
Regards
JoHi,
Firstly, I'd like to say, basic authentication requires user name and password. Thus, it's an expected behavior that credential will prompt once when users login Outlook with basic authentication.
Additionally, I'd like to confirm how you confirm it's Outlook Anywhere when the credential prompts. Based on my knowledge, the credential issue may be caused by connectivity issue and we can confirm the connection method through the tool "connection status".
Thus, I'd like to confirm if the connection is established when the credential issue happens.
Press ctrl and right click Outlook icon>connection status>status, protocol
Thanks,
Angela Shi
TechNet Community Support -
Exchange 2007 - enabling RPC over HTTP in add/remove windows components
Does adding this component require a reboot or interrupt Exchange functionality?
Hi,
Based on my knowledge, there is no need to reboot the Exchange server 2007 when you install the Windows RPC over HTTP Proxy component.
What's more, here is an article for your reference.
How to Enable Outlook Anywhere
http://technet.microsoft.com/en-us/library/bb123889(v=exchg.80).aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
Troubleshooting for RPC over https (Outlook Anywhere) connection issue
RPC over https (ROH), well known as Outlook Anywhere, is more frequently used. Even in Exchange 2013, Outlook no longer connects CAS server via MAPI.
In this thread, we will discuss about the troubleshoot checklist about the RPC over https (Outlook Anywhere) connection issue. In order to make it more logical, I’d like to divide the whole troubleshooting to the following processes:
1. Client side to CAS side
2. CAS side to MBX side
[Issues between Client side to CAS side]
In Exchange 2013, Outlook Anywhere is enabled by default. Different from this, Outlook Anywhere in Exchange 2007 and 2010 need to be manually enabled. Thus, please firstly check if the RPC over HTTP component has been installed:
Click Start, and then click Control Panel.
Double-click Programs and Features.
In the left pane of Server Manager, click Features.
In the right pane, click Add Features.
Check if the RPC over HTTP component has been selected.
If the ROH connectivity issue only happens on certain users, the property MAPIBlockOutlookRpcHTTP can be checked:
Get-CASMailbox name | fl MAPIBlockOutlookRpcHttp
2. Confirm if Exchange server is blocked. Ping the Exchange server FQDN on client machine and confirm if it can return the proper IP address.
3. Check if the RPC Proxy server is responding correctly:
rpcping -t ncacn_http -s ExchServer -o RpcProxy=RPCProxyServer -P "user,domain,*" -I "user,domain,*" -H 2 -u 10 -a connect -F 3 -v 3 -E -R none
If 200 code returns, the test is successful.
4. Check if Outlook Anywhere host names are added in the certificate:
To get host names, the following command can be used: get-outlookanywhere |fl *hostname
5. To use the Shell to test Outlook Anywhere connectivity, use the
Test-OutlookConnectivity cmdlet.
[Issues between CAS side to Mailbox side][RZ1]
A. Check if it can connect to store’s port:
RpcPing –t ncacn_http –s ExchangeMBXServer -o RpcProxy=RpcProxyServer -P "user,domain,password" -I "user,domain,password" -H 1 –F 3 –a connect –u 10 –v 3 –e 6001
If it returns as following: Completed 1 calls in 60 ms 16 T/S or 60.000 ms/T, it means the RPC Ping Utility test succeeds.
B. Check if it can Connect to DsProxy Service:
RpcPing –t ncacn_http –s ExchangeMBXServer -o RpcProxy=RpcProxyServer -P "user,domain,password" -I "user,domain,password" -H 2 –F 2 –a connect –u 10 –v 3 –e 6004
If it returns as following: Completed 1 calls in 60 ms 16 T/S or 60.000 ms/T, it means the RPC Ping Utility test succeeds.
C. Check the following registries:
[Disable the auto update]
1).Open Regedit and navigate to:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MSExchangeServiceHost\RpcHttpConfigurator\RpcHttpConfigurator
2).Set the PeriodicPollingMinutes value to 0.
[Check the RpcProxy ValidPorts]
1).On the RPC proxy server, start Registry Editor (Regedit).
2). In the console tree, locate the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Rpc\RpcProxy
3). In the details pane, right-click the ValidPorts subkey, and then click Modify.
4). In Edit String, in the Value data box, type the following information:
ExchangeServer :6001-6002; ExchangeServerFQDN :6001-6002; ExchangeServer :6004; ExchangeServerFQDN :6004
Note:
ExchangeServer is the NetBIOS name of your Exchange server. ExchangeServerFQDN is the fully qualified domain name (FQDN) of your Exchange server. If the FQDN that is used to access the server from the Internet differs from the internal FQDN, you must use
the internal FQDN.
[Check the 6004 port settings in registry]
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MSExchangeSA\Parameters
Value name: HTTP Port
Value type: REG_DWORD
Value data: 0x1772 (Decimal 6002)
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MSExchangeSA\Parameters
Value name: Rpc/HTTP NSPI Port
Value type: REG_DWORD
Value data: 0x1774 (Decimal 6004)
D. Check if the RPC ports are used by other applications instead of Exchange by using : netstat –o
Then it will return all active TCP connections and the process ID (PID) for each connection.
After that, please check the application based on the PID on the Processes tab in Windows Task Manager and confirm if it’s Exchange server.
Additionally, ExRCA is a perfect tool to test the whole connection between client side and Mailbox side:
https://testconnectivity.microsoft.com/
1. On the ExRCA website, under Microsoft Office Outlook Connectivity Tests, select Outlook connectivity, and then select Next at the bottom of the page.
2. Enter the required information on the next screen, including email address, domain and user name, and password.
3. Choose whether to use Autodiscover to detect server settings or to manually specify server settings.
4. Accept the disclaimer, enter the verification code, and then select Verify.
5. Select Perform Test.
<Resource for reference>
How does Outlook Anywhere work (and not work):
http://blogs.technet.com/b/exchange/archive/2008/06/20/3405633.aspx
How to use the RPC Ping utility to troubleshoot connectivity issues with the Exchange over the Internet feature in Outlook 2007 and in Outlook 2003:
http://support.microsoft.com/kb/831051
Test Outlook Anywhere Connectivity:
http://technet.microsoft.com/en-us/library/ee633453(v=exchg.150).aspx
[RZ1]It’s part, please re-layout
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.I've just restored the M11 to Windows XP with the disks provided and Outlook Anywhere connected without issue. As strange as it sounds, this looks to be isolated to this particular model of laptop and Windows 7.
I've used the same Enterprise copy of Windows 7 and Office on a variety of laptops and pc's and none have come across this problem. The only commonality I can see is the hardware and OS.
Aftery trying to troubleshoot this unsuccessfully with Microsoft tech support for a few hours, they eluded to the fact that this +could+ be a hardware related problem. (driver, adapter properties, etc) -
CSS Load Balancing with Billing Server
Hi Gilles
Could I have a CSS load balancing two servers and also have it communicate with a billing server across the network. If yes then how can I do it?
Regards,
Sushilthe CSS does not have the notion of billing server. A separate device - like the CSG - should be used if you need to collect billing info.
Gilles. -
RPC over HTTP trouble Exchange 2013/2007 coexistence, 2013 RPCProxy cannot ping GC.
I currently have an Exchange 2013/2007 coexistence scenario which gives me trouble with the RPC over HTTP part with users with a 2007 mailbox. the MS RCA website performs 2 tests with the MAPI address book endpoints, once against a 2007 mailbox server and
once a against a GC/DC, the last one fails. The logs are from our test domain, but the exact same happens in the production domain. running CU8 (recently upgraded, but problem was exactly the same with CU7)
Testing the MAPI Address Book endpoint on the Exchange server.
The address book endpoint was tested successfully.
Additional Details
Elapsed Time: 7872 ms.
Test Steps
Attempting to ping the MAPI Address Book endpoint with identity: exmb11.domain.test:6004.
The endpoint was pinged successfully.
Additional Details
The endpoint responded in 156 ms.
Elapsed Time: 4153 ms.
Testing the MAPI Address Book endpoint on the Exchange server.
An error occurred while testing the address book endpoint.
Additional Details
Elapsed Time: 3079 ms.
Test Steps
Attempting to ping the MAPI Address Book endpoint with identity: tdc01421.domain.test:6004.
The attempt to ping the endpoint failed.
<label for="testSelectWizard_ctl12_ctl06_ctl02_ctl09_ctl00_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details
The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process.
Elapsed Time: 3079 ms.
texmb11 = ex2007 mailbox
texfr11 = ex2007 CAS
tdc01421 = DC/GC
texch31 = 2013 multirole
other symptoms :
Browser test
https://texch31.domain.test/rpc/rpcproxy.dll?texmb11:6004
--> 503 (which is correct)
https://texch31.domain.test/rpc/rpcproxy.dll?tdc01421:6004
--> 404.0 Not Found
RPCPing
rpcping -t ncacn_http -s texmb11 -o RpcProxy=texch31.domain.test -P "user,dom,*" -I "user,dom,*" -H 2 -u 9 -a connect -F 3 -v 3 -e 6004
Success
rpcping -t ncacn_http -s tdc01421 -o RpcProxy=texch31.domain.test -P "user,dom,*" -I "user,dom,*" -H 2 -u 9 -a connect -F 3 -v 3 -e 6004
Fails!
so the Ex2013 RPCProxy doesn't proxy to the DC/GC, but the RPCProxy to an ex2007 mailbox server works fine, so the authentication methods configured are correct i'd say..
the same tests using the ex2007CAS server as RPC proxy all succeed!:
MS RCA is all green
https://texfr11.domain.test/rpc/rpcproxy.dll?texmb11:6004
--> 503
https://texfr11.domain.test/rpc/rpcproxy.dll?tdc01421:6004
--> 503
rpcping -t ncacn_http -s texmb11 -o RpcProxy=texfr11.domain.test -P "user,dom,*" -I "user,dom,*" -H 2 -u 9 -a connect -F 3 -v 3 -e 6004
Success
rpcping -t ncacn_http -s tdc01421 -o RpcProxy=texfr11.domain.test -P "user,dom,*" -I "user,dom,*" -H 2 -u 9 -a connect -F 3 -v 3 -e 6004
Success!!
Logs
all tries against the 2013 CAS server generate '404' log entries in several logs int the Logging directory, the most explicit being the one in Program Files\Microsoft\Exchange Server\V15\Logging\HttpProxy\RpcHttp : HttpProxy_xxxxxx.LOG
2015-04-30T19:58:00.153Z,895cdf07-f2eb-4beb-b787-da02ba11b0c2,15,0,1076,0,,RpcHttp,webmail.domain.test,/rpc/rpcproxy.dll,,Basic,true,DOM\user,,,MSRPC,10.10.142.132,TEXCH31,404,,MailboxGuidWithDomainNotFound,RPC_IN_DATA,,,,,,,,,4,,,,1,,,0,,0,,0,0,,0,2,0,,,,,,,,,1,1,0,,1,,2,2,,?TDC01422.domain.test:6004,,BeginRequest=2015-04-30T19:58:00.153Z;CorrelationID=<empty>;ProxyState-Run=None;ProxyState-Complete=CalculateBackEnd;EndRequest=2015-04-30T19:58:00.153Z;,HttpProxyException=Microsoft.Exchange.HttpProxy.HttpProxyException:
RPC server name passed in by client could not be resolved: TDC01422.domain.test at Microsoft.Exchange.HttpProxy.RpcHttpProxyRequestHandler.ResolveToDefaultAnchorMailbox(String originalRpcServerName String reason) at
Microsoft.Exchange.HttpProxy.RpcHttpProxyRequestHandler.ResolveAnchorMailbox() at Microsoft.Exchange.HttpProxy.ProxyRequestHandler.InternalBeginCalculateTargetBackEnd(AnchorMailbox& anchorMailbox) at Microsoft.Exchange.HttpProxy.ProxyRequestHandler.<BeginCalculateTargetBackEnd>b__3b();
the error suggests the name could not be resolved. but nslookup works fine. i can ping the tdc01421 correctly form texch31, it returns me the ipv4 address. i can telnet to port 6004 from texch31 server to tdc01421 giving me the correct 'ncacn_http' answer..
i look at the 'ValidPorts' and ValidPorts_Autoconfig_Exchange reg keys and filled them with the same i have on the 2007cas servers (all ex servers, all dc/gc's, all of them with netbios & fqdn ports 6001,6002 & 6004..) but also no success.
im out of ideas by now..Hello togehter,
if anyone is using the Interim Update (Hotfix) "Exchange2013-KB2997209_2997847-x64-en.msp" please be aware of the following bug in this hotfix:
NOTE: Another issue that we have seen only from some E2013 On-Premises customers who installed
fixes for any of the above E2013 CU6 related issues is that “Using OWA, users cannot create new messages or reply to existing messages” – These are mostly installer issues where OWA files are not copying correctly in the new version directory. Ideally the
content of these two folders, i.e. “V15\ClientAccess\Owa\prem\15.0.995.31” and “V15\ClientAccess\Owa\prem\15.0.995.29” should be identical, now if for any reason, they are not then it can break the OWA experience like described above. Take these steps if you
run into related issues:
-Backup the contents of “15.0.995.31” folder to a different folder/directory
-Copy the files and folders from “15.0.995.29” to “15.0.995.31” folder – this should fix the issue …
Best,
Martin -
BM 3.8 / Outlook RPC over HTTP
hello,
we want to use outlook rpc over http. did anybody know, what ports do i
need to open the firewall for that?
i think statefull from outside to dmz, but witch ports?
is is 6000 standard from ms knowledgebase?
helge
how can i check it out ? what for a filter do i need really ?Helge,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
isn't possible to syncing iphone4 with an "rpc over http" configured outlook?
thanksHelge,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
500 Internal server error on RPC over HTTP using TS Gateway
I've been happily using TS Gateway on Windows Server 2008 x64 for 18 months and everything was working perfectly. Suddenly this week it started giving "access denied" errors to any user who tried to connect, evidenced in event viewer as a failed login attempt.
After restarting the server, it got worse in that if I browse to the /rpc folder it gives me 500 Internal server error and I don't even get as far as authenticating credentials. I've tried removing IIS, RPC over HTTP and TS Gateway, and re-adding all of them,
but I still get the same error 500. The RPC and TS Gateway services are both running. What could be causing this and how can I fix it?Hi,
Thanks for your post.
Firstly, check the following KB article to troubleshoot this issue.
This computer can't connect to the remote computer because the Terminal Services Gateway server is temporarily unavailable
http://support.microsoft.com/default.aspx?scid=kb;EN-US;969743
If the issue still persists, you may perform the below steps:
Uninstalled TSGateway, IIS role, all IIS related components.
Delete all files in the folder %windir%\system32\inetsrv\config
Delete all files in the folder %windir%\system32\inetsrv\metaback
Restart the server and try to re-install TSGateway again
Best Regards,
Aiden
Aiden Cao
TechNet Community Support
Thank you very much for this. I confirm it fixed the problem, although there was an error in reinstalling IIS and TS Gateway until I also removed Windows Process Activation Service. -
Is there any apps for iphone to support rpc over http or any software yet
Hi,
Am wondering if there is any kind of app or software that supports rpc over http in exchange 2003 enviroment for iphone?? I am looking for solution for my company employees so that they can get emails securly to their hand held devices. I found one called "good" but havent used yet and dont know if there is any configuration fro rpc over http. Any suggestion would be greatly appreciated.
Many thanks,The number of apps currently available in the App Store compatible with both iOS 4.2.1 and the iPhone 3G hardware (a major limitation) is dwindling rapidly. If you don't already have a supply of apps, your choices are getting fewer and fewer. TIme to consider upgrading the phone.
-
RDS 2012 Disable HTTP transport - Enable only RPC over HTTP for both pre 8 and 8 RDP clients
Hi,
Is it possible to enable only RPC over HTTP for both pre 8 and 8 RDP clients?
Thank youI would like to know this as well.
-
I am new to CSS. I have CSS 1150 with IOS 7.3. I want to load balancing two servers 192.168.210.55 and 192.168.210.56 on port 80.
My CSS is connected in single arm configuration. Core switch is dong the Inter VLAN routing and CSS is connected in the VLAN 200 access Port.
Servers and CSS are connected to same Layer 3 switch.
CSS is in VLAN 200 (192.168.200.10)
Servers are in VLAN 210
Below is the configuration of my CSS
================================================================================
CSS11501(config)# show run
!Generated on 04/03/2011 16:47:41
!Active version: sg0730106
configure
!*************************** GLOBAL ***************************
username net des-password xxxxxx superuser
logging subsystem flowmgr level debug-7
logging disk log.log
ip route 0.0.0.0 0.0.0.0 192.168.200.1 1
!************************* INTERFACE *************************
interface e1
phy 100Mbits-FD
bridge port-fast enable
bridge vlan 2
interface e2
bridge vlan 2
bridge port-fast enable
phy 100Mbits-FD
interface e4
bridge port-fast enable
phy 100Mbits-FD
interface e8
bridge port-fast enable
phy 100Mbits-FD
!************************** CIRCUIT **************************
circuit VLAN1
ip address 192.168.200.10 255.255.255.0
!************************** SERVICE **************************
service Citrix_Xenapp
ip address 192.168.210.55
keepalive port 80
active
service Citrix_Xenapp_2
ip address 192.168.210.56
keepalive port 80
active
!*************************** OWNER ***************************
owner ENOC_Citrix_XENAPP
content Citrix_XENAPP
add service Citrix_Xenapp
add service Citrix_Xenapp_2
vip address 192.168.200.52
protocol tcp
port 80
active
CSS11501(config)# show service
Services (3 entries):
Name: Citrix_Xenapp Index: 0
Type: Local State: Alive
Rule ( 192.168.210.55 ANY ANY )
Session Redundancy: Disabled
Redirect Domain:
Redirect String:
Keepalive: (ICMP 5 3 5 )
Last Clearing of Stats Counters: 04/03/2011 16:38:49
Mtu: 1500 State Transitions: 14
Total Local Connections: 0 Total Backup Connections: 0
Current Local Connections: 0 Current Backup Connections: 0
Total Connections: 0 Max Connections: 65534
Total Reused Conns: 0
Weight: 1 Load: 2
DFP: Disable
Name: Citrix_Xenapp_2 Index: 6
Type: Local State: Alive
Rule ( 192.168.210.56 ANY ANY )
Session Redundancy: Disabled
Redirect Domain:
Redirect String:
Keepalive: (ICMP 5 3 5 )
Last Clearing of Stats Counters: 04/03/2011 16:39:40
Mtu: 1500 State Transitions: 12
Total Local Connections: 1 Total Backup Connections: 0
Current Local Connections: 0 Current Backup Connections: 0
Total Connections: 1 Max Connections: 65534
Total Reused Conns: 0
Weight: 1 Load: 2
DFP: Disable
CSS11501(config)# sh version
Version: sg0730106 (07.30.1.06)
Flash (Locked): 07.20.2.06
Flash (Operational): 07.30.1.06
Type: PRIMARY
Licensed Cmd Set(s): Standard Feature Set
CSS11501(config)# sh run
!Generated on 04/03/2011 17:39:46
!Active version: sg0730106
configure
!*************************** GLOBAL ***************************
username net des-password xxxxx superuser
logging subsystem flowmgr level debug-7
logging disk log.log
ip route 0.0.0.0 0.0.0.0 192.168.200.1 1
!************************* INTERFACE *************************
interface e1
phy 100Mbits-FD
bridge port-fast enable
bridge vlan 2
interface e2
bridge vlan 2
bridge port-fast enable
phy 100Mbits-FD
interface e4
bridge port-fast enable
phy 100Mbits-FD
interface e8
bridge port-fast enable
phy 100Mbits-FD
!************************** CIRCUIT **************************
circuit VLAN1
ip address 192.168.200.10 255.255.255.0
!************************** SERVICE **************************
service Citrix_Xenapp
ip address 192.168.210.55
keepalive port 80
active
service Citrix_Xenapp_2
ip address 192.168.210.56
keepalive port 80
active
!*************************** OWNER ***************************
owner ENOC_Citrix_XENAPP
content Citrix_XENAPP
add service Citrix_Xenapp
add service Citrix_Xenapp_2
vip address 192.168.200.52
protocol tcp
port 80
active
CSS11501(config)# show service
Services (3 entries):
Name: Citrix_Xenapp Index: 0
Type: Local State: Alive
Rule ( 192.168.210.55 ANY ANY )
Session Redundancy: Disabled
Redirect Domain:
Redirect String:
Keepalive: (ICMP 5 3 5 )
Last Clearing of Stats Counters: 04/03/2011 16:38:49
Mtu: 1500 State Transitions: 14
Total Local Connections: 0 Total Backup Connections: 0
Current Local Connections: 0 Current Backup Connections: 0
Total Connections: 0 Max Connections: 65534
Total Reused Conns: 0
Weight: 1 Load: 2
DFP: Disable
Name: Citrix_Xenapp_2 Index: 6
Type: Local State: Alive
Rule ( 192.168.210.56 ANY ANY )
Session Redundancy: Disabled
Redirect Domain:
Redirect String:
Keepalive: (ICMP 5 3 5 )
Last Clearing of Stats Counters: 04/03/2011 16:39:40
Mtu: 1500 State Transitions: 12
Total Local Connections: 1 Total Backup Connections: 0
Current Local Connections: 0 Current Backup Connections: 0
Total Connections: 1 Max Connections: 65534
Total Reused Conns: 0
Weight: 1 Load: 2
DFP: Disable
CSS11501(config)# show content
Content Database:
Pieces of content for module: 1
Total Content: 56
CSS11501(config)# show owner
Owner Configuration:
Name: ENOC_Citrix_XENAPP
Billing Info:
Address:
Email Address:
DNS Policy: none
Case Matching: Insensitive
CSS11501(config)# show owner ?
<cr> Execute command
ENOC_Citrix_XENAPP
CSS11501(config)# show owner ENOC_Citrix_XENAPP ?
<cr> Execute command
statistics Show owner statistical information
CSS11501(config)# show owner ENOC_Citrix_XENAPP
Owner Configuration:
Name: ENOC_Citrix_XENAPP
Billing Info:
Address:
Email Address:
DNS Policy: none
Case Matching: Insensitive
CSS11501(config)# show owner ENOC_Citrix_XENAPP statistics
Owner Statistics for <ENOC_Citrix_XENAPP>:
DNS Policy: None Case Sensitivity: Off
Hits: 1 Reject Overload: 0
Bytes: 52 Reject No Services 0
Frames: 1 Drops 0
Redirects 0 NAT Translations: 0
Spoofs: 0
CSS11501(config)#
The load balaning IP is 192.168.200.52 but I cant ping this virtual IP and cant telnet on port 80 on this IP address.
CSS11501(config)# ping 192.168.205.55
Pinging 192.168.205.55 1 time(s)...
Working(-) 0/1
0% Success.
%% Ping Failure
CSS11501(config)# ping 192.168.210.55
Pinging 192.168.210.55 1 time(s)...
Working(-) 1/1
100% Success.
CSS11501(config)# ping 192.168.210.56
Pinging 192.168.210.56 1 time(s)...
Working(-) 1/1
100% Success.
CSS11501(config)# ping 192.168.210.1
Pinging 192.168.210.1 1 time(s)...
Working(-) 1/1
100% Success.
CSS11501(config)# ping 192.168.200.1
Pinging 192.168.200.1 1 time(s)...
Working(-) 1/1
100% Success.
Network connectivity is there. Please let me know what I am missing and how to solve this problem.
Thanks in advance.Thanks for the reply, But I have modified my configuration. Now I am load balancing VLAN 200 Servers where the CSS also located in the same VLAN. Attach is the updated configuration.
I can only ping the VIP but not able to telnet on VIP (192.168.200.65 80).
configure
!*************************** GLOBAL ***************************
username net des-password net@dmin superuser
no restrict web-mgmt
logging subsystem flowmgr level debug-7
logging disk log.log
ip route 0.0.0.0 0.0.0.0 192.168.200.1 1
!************************* INTERFACE *************************
interface e1
phy 100Mbits-FD
bridge port-fast enable
bridge vlan 2
interface e2
bridge vlan 2
bridge port-fast enable
phy 100Mbits-FD
interface e4
bridge port-fast enable
phy 100Mbits-FD
interface e8
bridge port-fast enable
phy 100Mbits-FD
!************************** CIRCUIT **************************
circuit VLAN1
ip address 192.168.200.10 255.255.255.0
!************************** SERVICE **************************
service Citrix_Xenapp
ip address 192.168.210.55
keepalive port 80
active
service Citrix_Xenapp_2
ip address 192.168.210.56
keepalive port 80
active
service ENOC_EFAX_1
ip address 192.168.200.66
keepalive type none
protocol tcp
port 80
active
service ENOC_EFAX_2
ip address 192.168.200.67
keepalive type none
port 80
protocol tcp
active
!*************************** OWNER ***************************
owner ENOC_Citrix_XENAPP
content Citrix_XENAPP
add service Citrix_Xenapp
add service Citrix_Xenapp_2
vip address 192.168.200.52
protocol tcp
port 80
active
owner ENOC_EFAX
content EFAX
add service ENOC_EFAX_2
add service ENOC_EFAX_1
vip address 192.168.200.65
protocol tcp
port 80
active
!*************************** GROUP ***************************
group EFAX
vip address 192.168.200.65
add service ENOC_EFAX_1
add service ENOC_EFAX_2
active
=====================
CSS11501(config)# show flow
flow-timeout Display flow-timeout values.
flows Show flow summary information
CSS11501(config)# show flow 0.0.0.0
^
%% Invalid input detected at '^' marker.
CSS11501(config)# show flows 0.0.0.0
Src Address SPort Dst Address DPort NAT Dst Address Prt InPort OutPort
192.168.80.89 4567 192.168.200.65 80 192.168.200.67 TCP e8 e8
192.168.200.67 80 192.168.80.89 4567 192.168.80.89 TCP e8 e8
192.168.80.89 2474 192.168.200.10 23 0.0.0.0 TCP e8 Ipv4
CSS11501(config)# show service
Services (5 entries):
Name: Citrix_Xenapp Index: 0
Type: Local State: Alive
Rule ( 192.168.210.55 ANY ANY )
Session Redundancy: Disabled
Redirect Domain:
Redirect String:
Keepalive: (ICMP 5 3 5 )
Last Clearing of Stats Counters: 04/04/2011 21:57:17
Mtu: 1500 State Transitions: 0
Total Local Connections: 0 Total Backup Connections: 0
Current Local Connections: 0 Current Backup Connections: 0
Total Connections: 0 Max Connections: 65534
Total Reused Conns: 0
Weight: 1 Load: 2
DFP: Disable
Name: Citrix_Xenapp_2 Index: 6
Type: Local State: Alive
Rule ( 192.168.210.56 ANY ANY )
Session Redundancy: Disabled
Redirect Domain:
Redirect String:
Keepalive: (ICMP 5 3 5 )
Last Clearing of Stats Counters: 04/04/2011 21:57:17
Mtu: 1500 State Transitions: 0
Total Local Connections: 0 Total Backup Connections: 0
Current Local Connections: 0 Current Backup Connections: 0
Total Connections: 0 Max Connections: 65534
Total Reused Conns: 0
Weight: 1 Load: 2
DFP: Disable
Name: ENOC_EFAX_1 Index: 1
Type: Local State: Alive
Rule ( 192.168.200.66 TCP 80 )
Session Redundancy: Disabled
Redirect Domain:
Redirect String:
Keepalive: (NONE 5 3 5 )
Last Clearing of Stats Counters: 04/04/2011 21:57:17
Mtu: 1500 State Transitions: 0
Total Local Connections: 1 Total Backup Connections: 0
Current Local Connections: 0 Current Backup Connections: 0
Total Connections: 1 Max Connections: 65534
Total Reused Conns: 0
Weight: 1 Load: 2
DFP: Disable
Name: ENOC_EFAX_2 Index: 2
Type: Local State: Alive
Rule ( 192.168.200.67 TCP 80 )
Session Redundancy: Disabled
Redirect Domain:
Redirect String:
Keepalive: (NONE 5 3 5 )
Last Clearing of Stats Counters: 04/04/2011 21:57:17
Mtu: 1500 State Transitions: 0
Total Local Connections: 2 Total Backup Connections: 0
Current Local Connections: 1 Current Backup Connections: 0
Total Connections: 2 Max Connections: 65534
Total Reused Conns: 0
Weight: 1 Load: 2
DFP: Disable
CSS11501(config)# show service summary
Service Name State Conn Weight Avg State
Load Transitions
Citrix_Xenapp Alive 0 1 2 0
Citrix_Xenapp_2 Alive 0 1 2 0
ENOC_EFAX_1 Alive 0 1 2 0
ENOC_EFAX_2 Alive 1 1 2 0
CSS11501(config)# show rule
Content Rules:
///\\\ The Duke of Url.
{ O--O }
[||]
>>>>>>>>
Name: EFAX Owner: ENOC_EFAX
State: Active Type: HTTP
Balance: Round Robin Failover: N/A
Persistence: Enabled Param-Bypass: Disabled
Session Redundancy: Disabled
IP Redundancy: Not Redundant
L3: 192.168.200.65
L4: TCP/80
Url:
Redirect: ""
TCP RST client if service unreachable: Disabled
Rule Services & Weights:
1: ENOC_EFAX_1-Alive, S-1
2: ENOC_EFAX_2-Alive, S-1
>>>>>>>>
Name: Citrix_XENAPP Owner: ENOC_Citrix_XENAPP
State: Active Type: HTTP
Balance: Round Robin Failover: N/A
Persistence: Enabled Param-Bypass: Disabled
Session Redundancy: Disabled
IP Redundancy: Not Redundant
L3: 192.168.200.52
L4: TCP/80
Url:
Redirect: ""
TCP RST client if service unreachable: Disabled
Rule Services & Weights:
1: Citrix_Xenapp-Alive, S-1
2: Citrix_Xenapp_2-Alive, S-1
CSS11501(config)# show content
Content Database:
Pieces of content for module: 1
Total Content: 56
CSS11501(config)# show owner
Owner Configuration:
Name: ENOC_EFAX
Billing Info:
Address:
Email Address:
DNS Policy: none
Case Matching: Insensitive
Name: ENOC_Citrix_XENAPP
Billing Info:
Address:
Email Address:
DNS Policy: none
Case Matching: Insensitive
CSS11501(config)#
Please let me know what I am missing and also one link is not working.
To configure source nat you can refer to the following:
http://www.cisco.com/en/US/partner/docs/app_ntwk_services/data_center_app_services/css11500series/v8.20/configuration/content_lb/guide/SGrp.html
Maybe you are looking for
-
How to install oracle report builder in windows 7
Hi Team, Could you guide me to install oracle report 11g in my PC . Previously i was using 10g . OS : win 7 DATABASE : 11g
-
How to use SEA GSM Module on different slot of the cRIO 9073
Hello to All, I have a SEA GSM+ Module on my cRIO 9073 at slot 7. I run the example program included in the resource CD as well as compiling the FPGA driver on my target but still don't work. Power supply is connected on the module. I don't know what
-
Is Solution Manger mandatory for upgrade to NW2004s ?
Is solution Manger mandatory for upgrade to NW2004S ? Thanks, BP.
-
FRM-47321: Data used to populate tree is invalid
FRM-47321: Data used to populate tree is invalid I am populating from a record group Any Suggestion will be appreciated
-
External Editor function broken under 10.6.3
I updated to 10.6.3 recently. Now, when I control-click a photo and select "edit in external editor," nothing happens. Before, it would open Photoshop Elements 6, which I had selected as the external editor of choice in iPhoto Preferences. Now, in Pr