CSS Problem with iPod page

I too am having an issue on my iPod page here. I have created a css file in Dreamweaver and it appears in DW but when I upload it the page does not display correctly. I hope this is something easy.

I hope this is something easy.
It is.
THis give you any ideas?

Similar Messages

Problems with ipod connection.

Problems with ipod connection.
I have problems to connect my ipod to computer windows 7.
When I connect I get the following error:
"We encountered an ipod, but could not be identified correctly. Disconnect and reconnect the ipod and try again."
And it recognizes the ipod when trying to go play music or videos make me the following error:
"Error while trying to copy on disk. The device is not connected."
I've uninstalled all apple applications and re-installing, as I formatted the ipod and continues to set the same error.
What else can I do?

Hello,
While your symptoms don't exactly match the descriotion, this article may be usefull in discovering if there is a setting on your computer that is causing this to happen.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Griff W.

Problems with Ipod Touch

Problems with iPod Touch.
Hi, I bought an ipod touch in Colombia a couple of months ago but lost the invoice, I tried using it but everytime I connect the iPod to the computer, it restarts over and over again, I've tried all the recommendations show in the Apple support site, but no method has proved the question is, I can take this ipod to a Mac store in the U.S. for repair or change.
I live in Venezuela, there is some Apple store in my country where I can take it.
Thanks in advance for your quick response

You should be able to go to the USA for warrantee service. If you purchased at an Apple store you should be able to go to your account in iTunes and see the purchase. I am confused by your statement:
"I live in Venezuela, there is some Apple store in my country where I can take it."
If you go to the Venezuela apple website you can see if/where there are Apple stores.

Problems with error-page in web.xml and page caching

Having a few problems with error pages and web.xml with browsers caching the error pages and strange errors coming out of weblogic.servlet.intenal.WebAppServletContext
I'm trying to set a web app up so that all http errors and all exceptions are routed thruogh predefined resources. For now, I'm simply send 400 errors to 400.html and the ServletException, IOException and RuntimeException to respective html pages.
What I'm finding is that the error codes work fine but the exceptions are only be routed to the correct error page for the first call to the servlet after server restart.
So for example, I have my servlet throwing a ServletException as a test case. The weblogic server log shows that ServletException is thrown, and the correct error page for ServletExceptions is shown.
If I change the Servlet code to throw IOException in place of SevletException, the weblogic.log shows that IOExceptyion is being thrown (so the servlet has deployed successfully), however the Servletxception error page is shown on the browser.
I'm using IE6 and I've changed the setting such that a new page is requested every time using the tools-internet options-temp internet files-settings option to "check for new versions of stored pages: Every visit to the page".
Despite this, the servlet exception error page still appears.
If you clear the cache from the temp intenet files->delete files IE option, the correct errror page will be shown so it appears that the browser cache is being used after all.
everytime I delete the temp intenet files I get the correct error page on the first request after but then not after that.
I have implemented the service method for this test to throw the exceptions - does this make a differecne?
As a test, I have moved the imlpementation to the doGet method instead bu I now get a strange eror from weblogic comlpaining about an arrayOutOfBoundsException because eror codes in the web.xml are not supported! - see error above.
Any help is appreciated

After further investigation: -
There are no problems with error pages based on error codes, only error exceptions.
As a test case, I have a service method in a servlet throwing either one of the three exception types that servlets can throw (Runtime, Servlet & IO) the following rules apply. The exception to be thrown is hardcoded and is changed and the web app rebuilt each time. The correct web.xml has been deployed to the app server (checked through console). the webapp is being redeployed correctly - this can be seen in the weblogic log, where the correct exception is reported.
I am using WLS 8.1, Servlet 2.3, JDK 1.4.1_02
In all cases, the weblogic log reports that the servlet is throwing the exception as expected.
Despite having set error-page for exception javax.servlet.ServletException, the exceptions are diverted to the error page that has been set up for http error code 500
The error page for ServletException is therefore never reached.
I have the browser set to request pages every time it is asked.
Once the servlet has thrown an IOException, the only way to get the browser to report an IO or Runtime exception error-page is to clear the browser cache. Restarting the server has no effect.
Once the servlet has responded with ANY exception, it is not possible to get it to report a ServletException (which is incorrectly reported as a 500 anyway) unless the cache is cleared. Restarting the server has no effect.
In the case where the servlet throws ServletException, it has no root exception. The servlet 2.3 spec states that if ServletException is thrown but cannot be found in the error pages, the root excpetion will be extracted and the error page list traversed again. Knowing that the RuntimeException error page is correct shown when RuntimeException is throwm, I have nested this inside the ServletException, however error page for http error 500 is still shown.
I don't believe this is a WLS 8.1 problem, as the console shows that the correct exception is thrown each time. this is backed up by the fact that the correct exception page is thrown when the cache is cleared regardless of what exception was previousdly thrown by the servlet. This excludes ServletException which is always incorrectly thrown as a 500.

How can I fix this problem with exporting Pages files?

Hello,
I'm having problems with exporting Pages files to Word or PDF (I haven't tried the other formats). Whenever I try to export the Page file, I get one message like this: "The document "XXXXXXX" could not be exported as "YYYYYYY". This problem started after the last Pages update, before that it was working fine. I restarted the computer, updated the OS, but the problem hasn't been solved.
Does anyone know how to fix this problem?
Thank you in advance!
Best regards,
Filipe

Computers are made of parts made by humans and assembled by humans of materials that are not perfect.
For example, a display cable that was accidentally pinched during assembly would pass quality control testing with flying colors and would not fail until the lid had been opened and closed several times.
Likewise a display might not fail until powered on and off a few hundred times.

I have a problem with searching page, whenever i try to open any page a blank paper cums appear only written custom search google in English

i have a problem with searching page, whenever i try to open any page a blank paper cums appear only written custom search by google this one is not such as my google home page
== This happened ==
Not sure how often
== i use to search any page like movies or etc

Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

Windows 7 detects problem with iPod shuffle and after troubleshooting say it can't fix and disconnects it. What's up?

Windows 7 detects problem with iPod shuffle and after troubleshooting say it can't fix and disconnects it. What's up?

You might get some help over on the shuffle discussions.
http://discussions.apple.com/forum.jspa?forumID=822

Whats the problem with this page

hi,
i have problem with this page
page
it loading the video but not showing any content related to
the video.
i use
[code]
var netCon:NetConnection = new NetConnection();
netCon.connect(null);
var netStr:NetStream = new NetStream(netCon);
netStr.addEventListener(AsyncErrorEvent.ASYNC_ERROR,
getError);
var video:Video = new Video();
video.attachNetStream(netStr);
addChild(video);
video.x=201;
video.y=125;
function getError(e:AsyncErrorEvent) {
play_btn.addEventListener(MouseEvent.MOUSE_DOWN, playVideo);
function playVideo(e:MouseEvent) {
netStr.resume();
removeEventListener(KeyboardEvent.KEY_DOWN, keyPressHandler
this.addEventListener(Event.ENTER_FRAME, fileLoaded);
var loaderBar:Sprite = new Sprite();
addChild(loaderBar);
function fileLoaded(e:Event) {
var percent:Number = (netStr.bytesLoaded * 100 ) /
netStr.bytesTotal;
loaderBar.graphics.clear();
loaderBar.graphics.beginFill(0xDE2C18);
loaderBar.graphics.drawRect(205,378,percent * 4.32,5);
loaderBar.graphics.endFill();
if (percent==100) {
this.removeEventListener(Event.ENTER_FRAME, fileLoaded);
[/code]

here is the full code
and i have an error saying:
ArgumentError: Error #2004: One of the parameters is
invalid.
at flash.display::Graphics/drawRect()
at VIDEOPLAYER_fla::MainTimeline/fileLoaded()
[code]
import flash.display.Sprite;
import flash.net.NetConnection;
import flash.display.SimpleButton;
import flash.net.NetStream;
import flash.events.NetStatusEvent;
import flash.media.Video;
import flash.events.MouseEvent;
import flash.events.KeyboardEvent;
import flash.events.Event;
import flash.display.Graphics;
import flash.text.*;
var netCon:NetConnection = new NetConnection();
netCon.connect(null);
var netStr:NetStream = new NetStream(netCon);
netStr.addEventListener(AsyncErrorEvent.ASYNC_ERROR,
getError);
var URL:String =
"/hakans/videos/BEDUK_AUTOMATIK00.flv?start=";
var offset:uint = 1048576;
var tamURL:String = URL + offset;
trace(tamURL);
var video:Video = new Video();
video.attachNetStream(netStr);
video.x=201;
video.y=125;
netCon = new NetConnection();
netCon.addEventListener(NetStatusEvent.NET_STATUS,
netStatusHandler);
netCon.addEventListener(SecurityErrorEvent.SECURITY_ERROR,
securityErrorHandler);
function netStatusHandler(event:NetStatusEvent):void {
switch (event.info.code) {
case "NetConnection.Connect.Success":
connectStream();
break;
case "NetStream.Play.StreamNotFound":
trace("Unable to locate video: " + tamURL);
break;
function connectStream():void {
netStr.addEventListener(NetStatusEvent.NET_STATUS,
netStatusHandler);
netStr.addEventListener(AsyncErrorEvent.ASYNC_ERROR,
asyncErrorHandler);
netStr.play(tamURL);
addChild(video);
function securityErrorHandler(event:SecurityErrorEvent):void
trace("securityErrorHandler: " + event);
function asyncErrorHandler(event:AsyncErrorEvent):void {
// ignore AsyncErrorEvent events.
function getError(e:AsyncErrorEvent) {
var myTextBox:TextField = new TextField();
var myText:String = "Bytes loaded";
function TextWithImage()
addChild(myTextBox);
myTextBox.text = myText+netStr.bytesLoaded;
/*--------------< Videoyu Durdurma, Oynatma ve Başa
Alma >------------------*/
stage.addEventListener( KeyboardEvent.KEY_DOWN,
keyPressHandler );
function keyPressHandler( e:KeyboardEvent ):void {
// if the spaceBar is pressed then toggle video play/pause
if( e.charCode == 32 ) {
netStr.togglePause();
play_btn.addEventListener(MouseEvent.MOUSE_DOWN, playVideo);
function playVideo(e:MouseEvent) {
netStr.resume();
removeEventListener(KeyboardEvent.KEY_DOWN, keyPressHandler
pause_btn.addEventListener(MouseEvent.MOUSE_DOWN,
pauseVideo);
function pauseVideo(e:MouseEvent) {
netStr.pause();
stop_btn.addEventListener(MouseEvent.MOUSE_DOWN, stopVideo);
function stopVideo(e:MouseEvent) {
netStr.pause();
netStr.seek(0);
fastforward_btn.addEventListener(MouseEvent.MOUSE_DOWN,doForward);
function doForward(e:MouseEvent):void {
var f:int = 1; //you can schange the skipping time here
netStr.pause();
netStr.seek(netStr.time + f);
netStr.resume();
rewind_btn.addEventListener(MouseEvent.MOUSE_DOWN,doRewind);
function doRewind(e:MouseEvent):void{
var x:int = 2;
netStr.pause();
netStr.seek(netStr.time - x);
netStr.resume();
fullscreen_btn.addEventListener(MouseEvent.MOUSE_DOWN,doFull);
function doFull(e:MouseEvent):void{
stage.displayState = StageDisplayState.FULL_SCREEN;
/*--------------< Videoyu Durdurma, Oynatma ve Başa
Alma / >------------------*/
/*--------------< Video İçin Yükleme Bilgi
Çubuğu >------------------*/
var loaderBg:Sprite = new Sprite();
loaderBg.graphics.beginFill(0xc78f8e);
loaderBg.graphics.drawRect(205 , 378 , 430 , 5);
loaderBg.graphics.endFill();
addChild(loaderBg);
this.addEventListener(Event.ENTER_FRAME, fileLoaded);
var loaderBar:Sprite = new Sprite();
addChild(loaderBar);
function fileLoaded(e:Event) {
var percent:Number = (netStr.bytesLoaded * 100 ) /
netStr.bytesTotal;
loaderBar.graphics.clear();
loaderBar.graphics.beginFill(0xDE2C18);
loaderBar.graphics.drawRect(205 , 378 , percent * 4.32 , 5);
loaderBar.graphics.endFill();
if (percent==100) {
this.removeEventListener(Event.ENTER_FRAME, fileLoaded);
/*--------------< Video İçin Yükleme Bilgi
Çubuğu / >------------------*/
/*--------------< Video Meta Bilgileri
>------------------*/
var metaObject:Object = new Object();
netStr.client = metaObject;
metaObject.onMetaData = getMetaInformation;
var lengthOfVideo:Number = 0;
function getMetaInformation(e:Object):void {
lengthOfVideo = e.duration;
trace("Genişlik :" + e.width);
trace("Yükseklik :" + e.height);
/*--------------< Video Meta Bilgileri /
>------------------*/
/*--------------< Videonun Durum Çubuğu
>------------------*/
//may cause problem part
var GraphicsExample :Sprite = new Sprite();
var size:uint = 10;
var bgColor:uint = 0x999999;
var borderColor:uint = 0x999999;
var borderSize:uint = 0;
var cornerRadius:uint = 9;
var gutter:uint = 5;
var dragBar:Sprite = new Sprite();
var halfSize:uint = Math.round(size / 2);
dragBar.graphics.beginFill(bgColor);
dragBar.graphics.lineStyle(borderSize, borderColor);
dragBar.graphics.drawCircle(halfSize, halfSize, halfSize);
dragBar.graphics.endFill();
dragBar.x=201;
dragBar.y=376;
addChild(dragBar);
var drag:Boolean = false;
this.addEventListener(Event.ENTER_FRAME, setDragBar);
function setDragBar(e:Event) {
if (!drag) {
dragBar.x = ((netStr.time / lengthOfVideo) * 429) + 201;
/*--------------< Videonun Durum Çubuğu /
>------------------*/
/*--------------< Videonun Kaydırma Çubuğu
>------------------*/
dragBar.addEventListener(MouseEvent.MOUSE_DOWN,
startDragging);
dragBar.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
dragBar.buttonMode = true;
var rect:Rectangle = new Rectangle(205,378,429,0);
function startDragging(e:MouseEvent) {
drag = true;
netStr.pause();
dragBar.startDrag(false,rect);
function stopDragging(e:MouseEvent) {
dragBar.stopDrag();
drag = false;
netStr.resume();
this.addEventListener(Event.ENTER_FRAME, reSetVideo);
function reSetVideo(e:Event) {
if (drag) {
netStr.seek(Math.floor(((dragBar.x-201) / 429) *
lengthOfVideo ));
/*--------------< Videonun Kaydırma Çubuğu
/ >------------------*/
netStr.addEventListener(NetStatusEvent.NET_STATUS,
netStatusHandler1);
function netStatusHandler1(e:NetStatusEvent):void
switch (e.info.code)
case "NetStream.Seek.InvalidTime":
trace("You have seeked too far ahead, the video hasn't fully
loaded yet");
break;
case "NetStream.Play.StreamNotFound":
trace("Unable to locate video");
break;
/*--------------< Video Ses Kontrolü
>------------------*/
sound_btn.addEventListener(MouseEvent.MOUSE_DOWN, setSound);
var checkSound:Boolean = true;
var soundTrans:SoundTransform = new SoundTransform();
function setSound(e:MouseEvent) {
if (checkSound) {
soundTrans.volume = 0;
checkSound = false;
} else {
soundTrans.volume = 1;
checkSound =true;
netStr.soundTransform = soundTrans;
/*--------------< Video Ses Kontrolü /
>------------------*/
[/code]

Any ideas on problem with ipod and alpine cde-9881 car stereo

I have an ipod 60gb v 1.2.1 and a new Alpine car stereo with Ipod connecting cable. When connected, the stereo message reads IPod searching. It never assumes control of ipod,or quits searching. I have reset and restored my ipod, had the apple geek at genius bar check it out. My ipod does not play on the alpine ipod ready stereo in my husband's car, nor the stereos in Car Toys. My husband's 30 gb ipod plays on the stereo in his car AND my car. Help! Anyone have any ideas on how to fix this problem? Alpine is telling me it could be a software problem with my ipod, and to revert to an earlier version of itunes. But my husband's ipod works in my car. So I did a restore using his computer and itunes....no luck. am interested in any ideas on a possible solution!!
Thanks in advance
md

Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive and iTunes may exhibit strange behavior in relation to the iPod.

2 Problems with iPod Mini

well, I recently encountered 2 problems with my iPod Mini.
#1- It says the battery is charged, but dies out as soon as I start to play a song
-And-
#2- (the reason I joined this forum) just about 4 minutes ago, The screen has that black Apple logo on it, but it stays there forever. I reset it, but when the logo appears, it still stays there. I plugged it into my computer, and the logo is still there. It dosent respont what so ever. I cant even turn it off. Please tell me how to fix it.
"HOORA!"
Thanks- Marine

For your battery issue:
If your iPod is old, the battery is probably just worn out and needs replaced.
After about 400 charge cycles, the battery is only able to hold up to 80% of its charge. After even further charge cycles, the battery can hold less and less.
Read more about it at these pages:
iPod Battery FAQ
Getting the most from your iPod battery
General iPod battery information
If your iPod is out of warranty, Apple can replace your iPod with the same model and a new battery for $59 and $6.95 for shipping. If it is in warranty, there will be no service charge, but there may be a shipping fee.
For Apple to replace your battery, go here:
http://depot.info.apple.com/ipod/
3rd parties can also replace your battery with a generic battery for lower costs. They also sell DIY kits so you can replace it yourself, and never have to send it in.
Note that those Support articles are a tad outdated, so while their information is about the same, exact number figures may be off (Example: they say battery life can last 8-12 hours. New models can last about twice to three times that.)
For your second issue: (I don't have a premade message for this :P )
It sounds like the formatting messed up or the hard drive is failing. Reset it again, and as soon as the Apple logo pops up, hold the center and Play/Pause buttons until it goes into Disk Mode (if it doesn't get into disk mode, you really have problems, likely with your motherboard). If it gets into Disk Mode, plug it into a computer and use iTunes to restore it.
Try that and let me know how that works for you.

Have you been having problems with ipod nano 3rd gen?

Have you been having problems with your ipod nano 3rd gen? got a windows xp computer? is your pc not recognizing it? I think i may have the solution. After 2 2 hour calls to apple tech support they were stumped. we reset it again and again, reinstalled itunes again and again. and they had no solution for me. I went to my device managerand there was a device called (apple Ipod USB driver) with a yellow exclamation point. I tried updating driver but to no avail. I tried uninstalling and reinstalling and nothing. But then I had an epiphany. I went to the device manager right clicked the apple ipod usb device clicked properties then update driver. Hardware wizard went up and I chose not to install automatically. and i chose to install driver manually. and then I installed a generic usb mass storage driver in its place and presto!!! it worked! it was instantly recognized by itunes and it took me to the registration page. I did what the apple support team wasn't able to do for 4 hours. I wonder if they're accepting applications... Anyway i hope this helps anyone out there cause i know i went through a lot of stress.

the driver is just a regular usb mass storage driver. it's in your computer. it's just a matter of installing it manually where it saya to include the location of the driver click browse and choose c:\windows\system32

Problem with "Next Page" And "Zoom" in CrystalReportViewer With VS 2010

Hello,
i am using crystal report v 13 sp1 with visual studio 2010,
As mebtioned, the next page and the zoom is not working in my report, whiwh has as data source "Stored Procedure"
This is my code, and i think it's correct, i was using this code in previous versions of crystal report (cr10) and it worked fine,
When i used the Data set , the next page and zoom worked fine, but with stored procedure it doesn't work,
Note: when i open the Tree of Data on the left, then click on the next page or the zoom, it become funtional, it's very weird,
protected void *Page_Init*(object sender, EventArgs e)
if (!IsPostBack)
reportDocument = (ReportDocument)this.Page.Session ["_reportDocument"];
if (reportDocument != null)
string rptFile = reportDocument.FileName.Split('
', '/').Last();
LoadReportRessource(reportDocument);
TableLogOnInfo log = new TableLogOnInfo();
ConnectionStringSettings conn = WebConfigurationManager.ConnectionStrings[0]; //la premiere connectionstring
SqlConnectionStringBuilder SConn = new SqlConnectionStringBuilder(conn.ConnectionString);
log.ConnectionInfo.ServerName = SConn.DataSource;
log.ConnectionInfo.DatabaseName = SConn.InitialCatalog;
log.ConnectionInfo.UserID = SConn.UserID;
log.ConnectionInfo.Password = SConn.Password;
log.ConnectionInfo.Type = ConnectionInfoType.SQL;
for (int i = 0; i < reportDocument.Database.Tables.Count; i++)
reportDocument.Database.Tables.ApplyLogOnInfo(log);
for (int i = 0; i < CrystalReportViewer1.LogOnInfo.Count; i++)
CrystalReportViewer1.LogOnInfo.ConnectionInfo = log.ConnectionInfo;
CrystalReportViewer1.ParameterFieldInfo = (ParameterFields)this.Page.Session ["_paramFields"];
CrystalReportViewer1.ReportSource = reportDocument;
CrystalReportViewer1.DataBind();
CrystalReportViewer1.ShowFirstPage();
else
CrystalReportViewer1.ReportSource = (ReportDocument)this.Page.Session ["_reportDocument"] ;
Edited by: Soumaya on Sep 7, 2011 6:16 PM

@Don:
Sorry, but i donno what do you mean by "what is the App Pool running in 32 or 64 bit?",
i am running the application locally, ( the IIS is installed locally ),
as i told you, my OS is 64bit,
And yes i tried a very simple report, with just one field , and the "next button" is also not working,
Its only not working with stored procedure, in the others methods ( push or pull method is working fine)
i think its a problem in refreshing page, because when i open the tree on the left, then click on next page or zoom, its works fine
@Ludek:
i changed my code as below, and it doesn't solve my problem:
        ReportDocument reportDocument;
        protected void Page_Init(object sender, EventArgs e)
            if (!IsPostBack)
                reportDocument = (ReportDocument)this.Page.Session["_reportDocument"];
                if (reportDocument != null)
                    string rptFile = reportDocument.FileName.Split('
', '/').Last();
                        TableLogOnInfo log = new TableLogOnInfo();
                        ConnectionStringSettings conn = WebConfigurationManager.ConnectionStrings[0];
                        SqlConnectionStringBuilder SConn = new SqlConnectionStringBuilder(conn.ConnectionString);
                        log.ConnectionInfo.ServerName = SConn.DataSource;
                        log.ConnectionInfo.DatabaseName = SConn.InitialCatalog;
                        log.ConnectionInfo.UserID = SConn.UserID;
                        log.ConnectionInfo.Password = SConn.Password;
                        log.ConnectionInfo.Type = ConnectionInfoType.SQL;
                        for (int i = 0; i < reportDocument.Database.Tables.Count; i++)
                            reportDocument.Database.Tables<i>.ApplyLogOnInfo(log);
                    this.Page.Session["_reportDocument"] = reportDocument;
                    CrystalReportViewer1.ParameterFieldInfo = (ParameterFields)this.Page.Session["_paramFields"];
                    CrystalReportViewer1.ReportSource = reportDocument;
                    CrystalReportViewer1.ShowFirstPage();
            else
                CrystalReportViewer1.ReportSource = this.Page.Session["_reportDocument"];
Edited by: Soumaya on Sep 8, 2011 10:39 AM

Sync problems with ipod color

Hi I'm having problems copying music onto my ipod. I am running iTunes 5 with the latest iPod software (1.2 from ipod updater 2005-09-23) on a windows XP platform with Service pack 2. My iPod is connected to my computer through USB 2.0.
When I plug my ipod to my computer, everything works fine, it gets recognized, I see the "do not disconnect" icon on the ipod and it starts syncing but the problem is, way before it finishes tranfering the songs, my ipod comes back to the main menu. I can read in iTunes that the transfer is complete and that it's ok to disconnect my ipod, even though it was NOT complete!
This really bugs me because I can't put all my songs onto my ipod and have to disconnect/reconnect it all the time to actually put my songs in it. What can I do to keep the transfer "alive" ?? please someone help me.

Hi,
I have the same type of problem with my iPod 20GB color running XP Home SP2. This happens when I import a large number of songs (over 100 or so) from my CD's in iTunes at one time. It will disconnect and then restart the transfer over again several times. I figured out that when your iPod is actually connected and doing the transfer, if you right click on the iPod (example: Joe Smiths iPod) in the iTunes left side menu, and click on "update" every 40 or 50 songs or so it will transfer everything without disconnecting. I discovered this yesterday while transferring about 270 songs to my iPod after it tried to automatically do it about three times. I don't know if this is the "real" fix for this but it worked for me. The problem doesn't appear to happen with a couple of CD's worth of songs.
Good luck!

How soon are they going to fix the problems with iPod Touch IOS 6?

I'm using iPod Touch 4G with IOS 6. I didnt noticed the crashes problems until now. I am having a problem with IOS 6. I've read about the App store problem with crashes that everybody complaining about somewhere in community forum. But there are more problems with IOS 6. I noticed that my iPod touch downloading take FOREVER when I'm using WiFi. I had no problem downloading or using apps with IOS 5 with WiFi and running FASTER THAN IOS 6 but now with IOS 6 it TAKES FOREVER to downloading and apps crashing and running VERY SLOW. I noticed that some my apps are crashing too. When I use Twitter for a while and then it crashed again and again. What is going on? I know there is a bug but why arent they fix the problem sooner. now it have been 7 days that should solve the problem by now. why is taking sooooo long? PLEASE FIX THE PROBLEM ASAP.
Thank you,
SsnGrysn

I'm having exactly the same problem , most apps I go into start to crash , starting to get really annoyed now , I hope they fix this soon kuz I feel like throwing my ipod touch at a wall if it crashes again

CSS Problem with iPod page

Similar Messages

Maybe you are looking for