CSS '%% The File System is not mounted.' error.

While I first thought that this was a hardware problem, I've had it happen to 3 of my CSS 11503s in the last 2 weeks. I logged into the CSS and found that the prompt had gone back to the default prompt. Upon further investigation, I was not able to do a write mem - it would just return the following error:
%% The File System is not mounted.
Has anyone seen this before? I went to reboot the unit, but I've lost access to it. I'm actually going to the datacenter today to check it further, but I was hoping someone might be able to tell me if this is a bug or software issue I might need to worry about. Any help would be appreciated. Thanks!
Additional info:
CSS 11503 - failover pair running in one-armed mode.
Version: sg0730203 (07.30.2.03)
Flash (Locked): 07.30.2.03
Flash (Operational): 07.30.2.03
Type: PRIMARY
Licensed Cmd Set(s): Standard Feature Set
Jason

Looks like you have a hard disk failure.
Reboot the CSS and let it go through a full diagnostic.
If it does not work after reboot, you will need to replace the unit.
If it works, this could be a one-time error.
If the error comes back, definitely replace the box.
Gilles.

Similar Messages

Mavericks Server; smbd: File system does not support 0x0, time/size attrs

So I recently installed a Mac Mini with Mavericks and Server 3.2.2 in the main office of my company and everything has been going well, minus a few expected bugs, until recently. Starting last week we've been experiencing random intervals where File Sharing stopped working altogether, and I'd been able to reboot and get it running again. Unfortunately, as I'm the Systems and Server Admin, I've been too busy to look at the logs until now (following the degradation of one of the drives in our DAT-Optic RAID system, I figured it was time to make it a priority), and I'm seeing dozens of entries in the system logs regarding the process smbd with file system does not support errors.
Here's an example.
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.110 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.110 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.110 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.130 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.130 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.130 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.131 AM smbd[602]: File system does not support 0X40000, file attrs
As far as I can tell, nothing else has changed in our system except for the fact that one of the drives died and was rebuilt as of yesterday (these smbd problems extend to last week shortly after I updated to 3.2.2 I believe). Any help would be much appreciated. I would normally first attempt a repair permissions to see if the issue is related to a bad plist somewhere but the last time we did that, our ACLs were duplicated across our file share and often incorrectly. I'm not sure if it's just me but the last Mac Server software I used was Snow Leopard Server (when it was still a full OS version) and it was infinitely more stable than what I've experienced thus far with Server 3. Anyway, I appreciate any help/advice that can be given and I apologize for the rant.

Been getting the same errors for a while.
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X40000, file attrs
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X0 time attrs
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X0, size attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X40000, file attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X0 time attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X0, size attrs
Believe they are related to random disconnects from the file server (10.9.5).

I am trying to resize disk space on parallels 6 for windows XP under configure Hardrive and I get the error resizing failed unable to resize last volume the file system of this volume might be damaged or not supported? I am on a Mac using Parallels 6

I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.

This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported".

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported". What does that mean? I am trying to drag libraries (with metadata) to external HD...wondering what the best way to do that is?

Kirby Krieger wrote:
Hi Shane. Not much in the way of thoughts - - but fwiw:
How is the drive attached?
Can you open large files on the drive with other programs?
Are you running any drive compression or acceleration programs (some drives arrive with these installed)?
Can you reformat the drive and try again?
Hi Kirby,
I attached the UltraMax Plus with a USB cable. The UltraMax powers the cable so power is not an issue. I can open other files. Also, there is 500GB of files on the drive so I cannot re-format it. Although, I noted I could import the entire Aperture Library. However, I do not want to create a duplicate on my machine because that would be defeating the purpose of the external drive.
Thanks,
Shane

[SOLVED] ERROR: Unable to determine the file system type of /dev/root:

:: Running Hook [udev]
:: Triggering uevents...done
Root device '804' doesn't exist.
Creating root device /dev/root with major 8 and minor 4.
error: /dev/root: No such device or address
ERROR: Unable to determine the file system type of /dev/root:
Either it contains no filesystem, an unknown filesystem,
or more than one valid file system signature was found.
Try adding
rootfstype=your_filesystem_type
to the kernelcommand line.
You are now being dropped into an emergency shell.
/bin/sh: can't access tty; job control turned off
[ramfs /]# [ 1.376738] Refined TSC clocksource calibration: 3013.000 MHz.
[ 1.376775] Switching to clocksource tsc
That's what I get when I boot my Arch system. It worked fine for quite a while, but suddenly it ran into an error where the SCSI driver module was corrupt. I fixed it by reinstalling util-linux-ng and kernel26, however, I run into this issue now. http://www.pastie.org/2163181 < Link to /var/log/pacman.log for the month of July, just in case. Yes, I bought a new ATI/AMD Radeon HD 5450 this Saturday, but it seemed to work fine till this broke and it works fine on Ubuntu too, so I suppose we can rule it out.
Last edited by SgrA (2011-07-05 20:45:36)

Autodetection failed on your first image, in both your previous kernel installs:
[2011-07-04 16:14] find: `/sys/devices': No such file or directory
Which means that sysfs was not mounted. You should be able to boot from the fallback image, which does not use autodetect. Figure out why /sys isn't mounted, as well, and fix that.
This is also a somewhat crappy bug in mkinitcpio that lets you create an autodetect image that's useless. It'll be fixed in the next version of mkinitcpio that makes it to core.
Last edited by falconindy (2011-07-04 17:41:19)

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

The Em Key is not configured properly or is corrupted in the file system and doe s not exist in the Management Repository.

I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
C:\Documents and Settings\abigail>emctl status emkey
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is not configured properly or is corrupted in the file system and doe
s not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
onfig directory.
2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
.ora file location>".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is already configured. To override the current configuration, run "em
ctl config emkey <options> -force".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The Em Key could not be configured. Unable to access file E:\app\abigail\product
\11.2.0\dbhome_1\sysman\config.
C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://ABIGAIL:5501/em/console/aboutApplication
DBCONSOLE already stopped...   Done.
Agent is already stopped...   Done.
Securing dbconsole...   Started.
Please enter repository schema password:
Securing dbconsole...   Failed.
EMKey is misconfigured.

Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
ANyway, thank youuuu

Hide a type of file System wide not just the extension*

Is it Possible & if So Howto hide a type of file System wide not just the extension*
Am trying to HIDE the Associated file for Photo Processing software in Finder, its a Specific file to the Program & holds the Raw data text Processed Info
. Would mean I would need to change each File individually
Is there a way/apple script?
Knowledge or experience would be Appreciated
Thanks

I followed these instructions and they work, but I also get errors. Here are two files in the directire, and the contents of ~/.profile, I called the function killextension:
I run the command to hide the PDF:
Note the two errors. Thank you very much, BTW. No more Dropbox attributes files!

An error occurred while opening the file, you can not open this file because it does not page???

Dear all,
i am test the report to show "No Data Found" world, but, when i preview to PDF, i got the message :An error occurred while opening the file, you can not open this file because it does not page.
i try to load the other xml file that have data, and report work,no error.
i don't know where is the problem, so i need some help....
Thanks in advance for your response.
my rtf report:
<?call:header?>
<?if:count(PLAN_CODE)>0?>
<?for-each@section:G_PLAN_CODE?>
<?template:Header?>
<?for-each:G_PURPOSE?>
<?end for-each?>
<?end template?>
<?for-each:G_PLAN_SUBSQL2?>
<?end for-each?>
<?end for-each?>
<?end if?>
<?if:count(PLAN_CODE)=0?>
====================No Data Found ===================
<?end if?>
about xml:
if no data query back:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE></LIST_G_PLAN_CODE>
<CF_START_DATE>102.3</CF_START_DATE>
<CF_END_DATE>102.3</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>
if have data:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE>
    <G_PLAN_CODE>
      <PLAN_CODE>03101C3003</PLAN_CODE>
      <PLAN_NAME>03101C3003_test</PLAN_NAME>
      <PLAN_EM>John</PLAN_EM>
      <PLAN_START_DATE>101.09.01</PLAN_START_DATE>
      <PLAN_END_DATE>102.08.31</PLAN_END_DATE>
      <PLAN_HOSTS>abc_super</PLAN_HOSTS>
      <LIST_G_PURPOSE>
        <G_PURPOSE>
          <PURPOSE_CODE>11600000</PURPOSE_CODE>
          <PURPOSE_NAME>Pre-Pay</PURPOSE_NAME>
          <LIST_G_PURPOSE_CODE>
            <G_PURPOSE_CODE>
              <BUDGET_AMOUNT>0</BUDGET_AMOUNT>
              <REAL_BUDGET_AMOUNT>0</REAL_BUDGET_AMOUNT>
              <TEMP_RECEIPT_AMOUNT>0</TEMP_RECEIPT_AMOUNT>
              <REAL_PAY_AMOUNT>0</REAL_PAY_AMOUNT>
              <TEMP_PAY_AMOUNT>-83006</TEMP_PAY_AMOUNT>
              <TEMP_PAY_FINAL_AMOUNT>83006</TEMP_PAY_FINAL_AMOUNT>
              <TOTAL_AMOUNT>83006</TOTAL_AMOUNT>
            </G_PURPOSE_CODE>
          </LIST_G_PURPOSE_CODE>
          <CS_BUDGET_AMOUNT>0</CS_BUDGET_AMOUNT>
          <CS_REAL_BUDGET_AMOUNT>0</CS_REAL_BUDGET_AMOUNT>
          <CS_TEMP_RECEIPT_AMOUNT>0</CS_TEMP_RECEIPT_AMOUNT>
          <CS_REAL_PAY_AMOUNT>0</CS_REAL_PAY_AMOUNT>
          <CS_TEMP_PAY_AMOUNT>0</CS_TEMP_PAY_AMOUNT>
          <CS_TEMP_PAY_FINAL_AMOUNT>0</CS_TEMP_PAY_FINAL_AMOUNT>
          <CS_TOTAL_AMOUNT>0</CS_TOTAL_AMOUNT>
        </G_PURPOSE>
      </LIST_G_PURPOSE>
      <LIST_G_PLAN_SUBSQL2>
        <G_PLAN_SUBSQL2>
          <GL_DATE>31-07-12</GL_DATE>
          <NARL_DOC_NUMBER>0310107311004</NARL_DOC_NUMBER>
          <AP_UNAPP></AP_UNAPP>
          <PLAN_NAME1>03101C3003_101-102</PLAN_NAME1>
          <PLAN_CODE1>03101C3003</PLAN_CODE1>
          <PLAN_EM1>Elly</PLAN_EM1>
          <PLAN_START_DATE1>2012/09/01 00:00:00</PLAN_START_DATE1>
          <PLAN_END_DATE1>2013/08/31 00:00:00</PLAN_END_DATE1>
          <PLAN_HOSTS1>KIC-Supp</PLAN_HOSTS1>
          <REAL_RECEIPT_AMOUNT>0</REAL_RECEIPT_AMOUNT>
          <DESCRIPTION>101 year</DESCRIPTION>
          <CF_GL_DATE>101.7.31</CF_GL_DATE>
        </G_PLAN_SUBSQL2>
      </LIST_G_PLAN_SUBSQL2>
      <CF_START_DATE1>99.1</CF_START_DATE1>
      <CF_END_DATE1>102.11</CF_END_DATE1>
      <CF_TITLE_NAME1>TCS Company</CF_TITLE_NAME1>
      <CF_OU_NAME1>IT Department</CF_OU_NAME1>
      <CF_SOURCE_CODE1>plan</CF_SOURCE_CODE1>
      <CF_PRINT_DATE1>102.11.19 17:12:19</CF_PRINT_DATE1>
      <CS_T_BUDGET_AMOUNT>517524</CS_T_BUDGET_AMOUNT>
      <CS_T_REAL_BUDGET_AMOUNT>517524</CS_T_REAL_BUDGET_AMOUNT>
      <CS_T_TEMP_RECEIPT_AMOUNT>289294</CS_T_TEMP_RECEIPT_AMOUNT>
      <CS_T_REAL_PAY_AMOUNT>289294</CS_T_REAL_PAY_AMOUNT>
      <CS_T_TEMP_PAY_AMOUNT>0</CS_T_TEMP_PAY_AMOUNT>
      <CS_T_TEMP_PAY_FINAL_AMOUNT>0</CS_T_TEMP_PAY_FINAL_AMOUNT>
      <CS_T_TOTAL_AMOUNT>228230</CS_T_TOTAL_AMOUNT>
      <CS_REAL_RECEIPT_AMOUNT>289294</CS_REAL_RECEIPT_AMOUNT>
    </G_PLAN_CODE>
</LIST_G_PLAN_CODE>
<CF_START_DATE>99.1</CF_START_DATE>
<CF_END_DATE>102.11</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>

Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

Cascading Style Sheets are NOT written to the file system

Hallo,
On the "Cascading Style Sheets" page is written that: "The Cascading Style Sheets are written to the file system, so you can reference them in your HTML source code."
I am true that if this works I can reference the css with something like this?
<link rel="stylesheet" href="/i/sample.css" type="text/css">
and do not need this style:
<link rel="stylesheet" href="#APP_IMAGES#sample.css" type="text/css">
<link rel="stylesheet" href="#WORKSPACE_IMAGES#sample.css" type="text/css">
I have looked on the "Cascading Style Sheets" page: http://127.0.0.1:7780/apex/f?p=4000:37
Are there some other preferences, options, etc. to set that this will be working?
Thx for your help. Willi

Hi,
CSS files uploaded through Shared Components, Cascading Style Sheets are written into the database, so you would have to use:
<link rel="stylesheet" href="#WORKSPACE_IMAGES#sample.css" type="text/css"/>You should be able to see these if you run the following in SQL Commands:
SELECT * FROM APEX_APPLICATION_FILES
WHERE UPPER(FILENAME) LIKE '%CSS%'Andy

IPhoto9: "library could not be opened because the file system of the library's volume is unsupported."

Can please anyone help me with this issue.
After upgrading from iPhoto8 to iPhoto9 my library won't open anymore. I have stored all my pictures on a NAS (Buffalo Link Station Duo). It all worked fine but since upgrading to iPhoto9 I do have the following problem:
When opening iPhoto I receive a message that the library needs to be updated. I assume that iPhoto should just do this sort of automatically in order to upgrade to iPhoto9.However, next message I receive then is
"The library could not be opened because the file system of the library's volume is unsupported."
Apple support so far does not seem to be able to solve my issue. Anyone else having had the same issue and having a solution to this?
Thanks a lot for your help.

There is no solution.
IPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.While you have been lucky to date, many folks with a library on a NAS found that it worked for a while and then the problems started.
Workaround: Put the Library on a Disk Image formatted Mac OS Extended (Journaled) and store that on the NAS. But the real solution is to use a properly formatted disk for the Library.
Regards
TD

InD blocking Ps to save a file / Could not save * because the file is already in use error

Many users have reported a Photoshop Could not save * because the file is already in use error in many different circumstances.
I place raw jpgs in InDesign document, then open them in Photoshop via Edit original order to adjust them. On random occasions Ps gives me that annoying error. So i found a little trick to avoid saving that image under a different name and relinking it plus reloading Ps since the error repeats on other pictures to.
All you have to do is: when Ps gives error, (Cmd-Tab) switch to InD, directly select the worked jpg in image frame (one that you try to save in Ps) and simply move it left-right (or move it and Undo). Now you can save it without problem.

JPEG is a "lossy" compression format. Every time you save as jpeg you recompress and throw away a little more information. In addition, jpeg does not support transparency or layers, both very useful features for woring with images. For example, you can add an adjustment layer in Photoshop to do your adjustments non-destructively for may of the things that you can do using Image > Adjustments... which will change your pixel data permanently. Throw away an adjustment layer and you image data is untouched. Also, ID allows you to place a layered image and control layer visibility from within ID, making it possible to multi-purpose a single file by showing or hiding various layers.

When opening a msword file wit .doc extension i get an error message: import error. The file format is not valid

when opening a msword file with .doc extension i get an error message: import error. The file format is not valid

Looks like. I tried in the TextEdit format tab to set all the combinations while opening the file, like plain text, rtf and html without success. Always I get the same signs.

IPhoto The library could not be opened because the file system of the library's volume is unsupported.

Have Yosemite installed on both my MBA and Mac Pro. iPhoto 9.0 running well on the MBA but when I tried opening iPhoto on my Mac pro get the message "The library could not be opened because the file system of the library's volume is unsupported." This is after I upgraded iPhoto.
Any help would be greatly appreciated.

While holding down the command & option keys boot into iPhoto and have it repair the Library. If that does not work then download "Library Manager" and have that program work. I found that better than the Apple program.

Error 1256 The remote system is not avilable - REPL summary

Hi all
For the past 3 days I am getting the below error while checking the AD replication. our present setup is
RDC and ADC was available in the same site. and DR ADC was configured in remote site. we have P2P link connectivity for OUR AD and Exchange 2010 DAG Replication. Kindly help me to solve this issue.
C:\>repadmin /replsummary
Replication Summary Start Time: 2015-01-05 18:39:15
Beginning data collection for replication summary, this may take awhile:
Source DSA          largest delta    fails/total %%   error
DRADC             02m:39s    0 /   5    0
RDC      02d.02h:03m:27s    5 / 10   50 (1256) The remote system is
not available. For information about network troubleshooting, see Windows Help.
ADC            17m:39s    0 / 10    0
Destination DSA     largest delta    fails/total %%   error
DRADC     02d.02h:03m:18s    5 / 10   50 (1256) The remote system is
not available. For information about network troubleshooting, see Windows Help.
RDC             17m:31s    0 / 10    0
ADC             04m:49s    0 /   5    0
C:\>repadmin /showrepl
Repadmin: running command /showrepl against full DC localhost
Default-First-Site-Name\ADC
DSA Options: IS_GC
Site Options: (none)
DSA object GUID: 5ddb9663-7c5b-4f2e-97b9-82a29e2c5955
DSA invocationID: 8d939f8e-fe0a-4bce-b260-e546e41e86d4
==== INBOUND NEIGHBORS ======================================
DC=ifmr,DC=co,DC=in
    Default-First-Site-Name\RDC via RPC
        DSA object GUID: 4988b352-e60b-4425-aac2-dd903d85eb2a
        Last attempt @ 2015-01-05 18:34:30 was successful.
CN=Configuration,DC=ifmr,DC=co,DC=in
    Default-First-Site-Name\RDC via RPC
        DSA object GUID: 4988b352-e60b-4425-aac2-dd903d85eb2a
        Last attempt @ 2015-01-05 18:39:22 was successful.
CN=Schema,CN=Configuration,DC=ifmr,DC=co,DC=in
    Default-First-Site-Name\RDC via RPC
        DSA object GUID: 4988b352-e60b-4425-aac2-dd903d85eb2a
        Last attempt @ 2015-01-05 18:34:26 was successful.
DC=DomainDnsZones,DC=ifmr,DC=co,DC=in
    Default-First-Site-Name\RDC via RPC
        DSA object GUID: 4988b352-e60b-4425-aac2-dd903d85eb2a
        Last attempt @ 2015-01-05 18:54:39 was successful.
DC=ForestDnsZones,DC=ifmr,DC=co,DC=in
    Default-First-Site-Name\RDC via RPC
        DSA object GUID: 4988b352-e60b-4425-aac2-dd903d85eb2a
        Last attempt @ 2015-01-05 18:40:04 was successful.
DsReplicaGetInfo() failed with status 8453 (0x2105):
    Replication access was denied.
DsReplicaGetInfo() failed with status 8453 (0x2105):
    Replication access was denied.
Jags

As an addition to what Frank shared, I would recommend that you read that too:
Active Directory Replication Issues – Basic Troubleshooting Steps (Single AD Domain in a Single AD Forest): http://social.technet.microsoft.com/wiki/contents/articles/18513.active-directory-replication-issues-basic-troubleshooting-steps-single-ad-domain-in-a-single-ad-forest.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

CSS '%% The File System is not mounted.' error.

Similar Messages

Maybe you are looking for