CSS to ACE conversion tool

Hi ,
Is their any CSS to ACE configuration conversion tool

Currently, there isn't one available yet, the conversion tool is embedded into the software image of the ACE. Not sure if there are plans to make it standalone, I have been looking for those answers as well.

Similar Messages

  • CSS to ACE migration Tool in A4(2.0)

    Hi,
    I'm currently working on migration from CSS to ACE. The ACE appliance is running A4(2.0) code. And i couldn't find the CSS to ACE conversion tool in the Web gui. Anybody faced the same issue?
    merci,
    arun

    Hi Arun,
    As we discussed over the phone for the TAC case , the conversion tool is avialable over HTTP access only.
    The tool is not avialable over HTTPS to ACE.
    Sincerely,
    Viral

  • CSS/CSM to ACE conversion tool

    Hi,
    Are there any plans to release a standalone CSS/CSM to ACE config migration tool? (just like the CatOS to IOS tool)?
    thanks,
    Andrew.

    Currently, there isn't one available yet, the conversion tool is embedded into the software image of the ACE. Not sure if there are plans to make it standalone, I have been looking for those answers as well.

  • Is there a CSM-to-ACE conversion tool?

    Hi Sir,
    Is there a tool to convert CSM config to ACE equivalent config?
    I have a long CSM config that needs to be migrated to ACE. If there's such a conversion tool, it would be great.
    Thank you.
    B.Rgds,
    Lim TS

    ACE web interface has the tool. Besides you can go to this site
    http://ace-tools.cisco.com/cgi-bin/csm2ace/csm2ace/
    thanks

  • CSS to ACE Migration Tool

    Hi,
    We are planning to upgrade from the existing CSS 11500 series to ACE (6506 bundle with 720 Sup engine). To facilitate a smooth migration, do we have any tool/procedure set?
    Thanks,
    RG.

    Currently there is no such tool to migrate CSS configs to ACE module. I heard that such a tool will be available with the release of ACE appliance (ACE box).
    Syed

  • CSM to ACE conversion Tool

    Hi
    Gilles made mention in a couple of posts about a tool on the ACE that can be accessed by enabling the http server and then connecting to the IP address of the ACE module.
    Could somebody point me at some documentation relating to it because I can't seem to find anything.
    Thanks
    Mark

    Hi,
    Assuming the ACE module and appliance both have the same tool you can find the online user guide here:
    http://www.cisco.com/univercd/cc/td/doc/product/webscale/ace_4700/ace_171/cssaceug.htm
    HTH
    Andrew.

  • CSS to ACE Convertion

    Hello all,
    We will change the CSS's to ACE's plataform's.
    Do u know any aplication wich can convert the basic CSS configuration into ACE configuration?
    Plataform's:
    CSS11501S-C-K9
    ACE 4710
    The certificates installed in the CSS could be migratted to the ACE ?

    Hello,
    The 4710 with the ACE software has a built-in CSS-to-ACE conversion tool accessible through the web interface. See http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA1_7_/configuration/css_to_ace/user/guide/cssaceug.html for example.
    The tool may not convert 100% but it may provide a good starting point.
    I don't see any reason why you can't export the certificates from the CSS (assuming you remember the password) and import them into the ACE.
    HTH
    Cathy

  • Is there CSM-ACE4710 config conversion tool?

    We are replacing CSM modules with 4710 appliances. Is there a config conversion tool? Have not seen it in any Cisco documents.
    Thanks a lot

    There is one tool onboard of the ACE module.
    http://www.cisco.com/en/US/partner/docs/interfaces_modules/services_modules/ace/v3.00_A2/configuration/csm_to_ace/user/guide/csmaceug.html
    Gilles.

  • Problem when execute report Conversion Tool XI 3.0 on a client

    Hi everyone,
    When I use Report Conversion Tool on a client (not on Webi Server Windows 2003) I have an error (a red cross appears) before the conversion.
    I believe that RCT can not open the document to migrate.
    All it's OK when I use RCT since the Webi Server.
    Any help will be appreciated.
    Thanks

    Hi,
    Thank you for your prompt response.
    I have install all the client tool (even SDK, Query Web Service) except Assitant migration source de données, Gestionnaires Vues d'entreprise et Gestionnaire de traduction.
    I think I have a problem of rights on my Windows 2003 Server because in the log of conversion (C:Documents and SettingsUtilisateurLocal SettingsTempconversionUSER146731693logsD30860242.xml)
    the following lines are written :
    Note that I do the conversion with the Administrator login.

  • Report Conversion Tool - problem with logging in table OBJ_G_MIGRATION

    Hello Community-Members,
    since several days I am searching different BO-Communities for a solution, but I didn't find any threats about my problem.
    I am new to BO XI R3.1 and I want to convert deski-reports with the report conversion tool.
    I tried it directly on the server-machine and all is ok (report is converted inclusive the logging in the audit-table OBJ_G_MIGRATION).
    When I try it on my client-machine, the conversion is made successfully, but there is no result in the audit-table.
    On the client-machine, I use the same connection like on the server machine and on both machines, I am logged on (in the report conversion tool) with the "Administrator"-user.
    Has anyone an idea? Could it be a problem of user-rights in the Oracle-DB?
    kind regards
    Guenny

    Hello Denis,
    thank you for your reply.
    From my client machine I can successfully test the connection to the Audit-DB. With non BO-Tools like "SQL Tools1.4.1" I can also connect to that DB.
    After your reply I have tested once again and I have found something else strange.
    If I convert a deski-report, and the conversion-status is "not converted", the Audit-DB is written (for example: error-text = "document cannot be read" / workaround = "remove protection password if set").
    But when I convert the same report together with an other report, which will result in "partially converted", nothing is written to the Audit-DB (same effect as when I convert only reports with status "partially convertet").
    regards
    Guenny

  • Report Conversion Tool  error

    Hi exports
    iam using software 3.1
    Iam facing below issue ,while  converting deski to webi reports
    Note : All my servers are up ..
    Is i need to enable any options in servers
    Thanks,
    Raghunath

    Hi Raghu,
        Try this idea: run it on server. Other user suggest the Windows version as the reason. if does not run, reinstall the Tool, maybe something is corrupted.
    Report Conversion Tool gives Error: Failed on Webintelligence Server
    Regards

  • Report conversion tool on BO XI 3.0 doesn't work ?

    Hi,
    When I use "Report conversion tool" on BO XI 3.0, it doen't work : The conversion stop immediatly and the report is 0% converted
    The audit connexion is OK
    The Report Conversion Tool Audit Universe is OK
    The same thing works on BO XI 3.1
    Is it a bug in BO XI 3.0 ?
    There is a fix ?
    Can somebody help please ?
    Thanks.

    Hello again,
    I put LANG=english in Report Conversion Tool, and I got these messages
    Failed: BusinessObjects or Desktop Intelligence error
    Not Converted : Document1 cannot be read
    And in :\Documents and Settings\administrateur\Local Settings\Temp\conversion\USER146731693\logs,
    there is a file D10817575.xml containing these informations :
    <?xml version="1.0" encoding="UTF-8"?>
    <MigrationLogFile LogDate=""><Document><Name>Document1</Name><LogEntries><LogEntry><Severity Id="420002">Error</Severity><Cause Id="100010">BusinessObjects document or Desktop Intelligence document cannot be opened</Cause><Source Id="420010">FC</Source><XMLSegment Id="100015">DC</XMLSegment><XMLPath></XMLPath><Type Id="100024">Error on BusinessObjects or Desktop Intelligence process</Type><SubType Id="101003">BusinessObjects or Desktop Intelligence process</SubType><Result Id="100350">.wid document could not be created</Result><ErrorText Id="100338">Document cannot be read</ErrorText><Keyword Id="100288">BusinessObjects or Desktop Intelligence error</Keyword><Focus></Focus><WorkAround Id="100504">Remove protection password if set</WorkAround></LogEntry>
    </LogEntries><MigrationStatus>Not Converted</MigrationStatus></Document></MigrationLogFile>
    I am logged with Administrator account, why I can't read the document Desktop Intelligence ?
    Can some body help me ?
    Thanks.

  • Upgrade from ICM 6 to 7 (TR) -- Domain conversion tool / UMT

    Hi, we are currently upgrading from 6 to 7.0 and subsequently to 7.5 (TR, new hardware, new domain, new instance).  So far we've staged our W2k3 domain and all the other soon to be ICM servers.
    I'm currently trying to migrate the domain users and it tells me that I need to use the Domain Conversion Tool to go migrate the domain users from 6 to 7. (Staging guide chpter 4)
    I can't find any documentation on the Domain Conversion Tool, when I run the executable I can see the different triggers (below) but that's it.
    I've done an export and gotten a file but what next?
    Do I do a convert now?
    is the convert going to change my production database?
    I'm also reading that the Domain Conversion Tool was replaced by the UMT (for 7.0 to 7.+).
    Or should I now use the UMT and point it to my export file?
    Im afraid to run the convert and and messing up my Rogger sideA database?
    Has anybody use this tool?
    any tips and or documentation is appreciated.  Thanks
    D:\ciscoutils\domainCnvTool>domcvt
    The syntax of this command is:
    DomCvt.exe /DB:dbname /F:filename /M:mode [/OD:old domain name]
              [/ND:new domain name][/P:password]
       /DB:dbname           Specifies the database name to operate on (e.g. cust1_sideA)
       /F:filename          Specifies the full path of the file to import or export to
       /M:mode              Indicates export mode or convert mode
                             E  Export mode
                             C  Convert mode
    The following switches are only needed in Convert Mode:
       /OD:old domain name  Specifies the old domain name to convert from in NetBIOS form (e.g. MyDomain)
       /ND:new domain name  Specifies the new domain name to convert to in NetBIOS form (e.g. MyDomain) or DNS form (e.g. MyDomain.mycompany.com)
       /P:password          Specifies the default password to be set for all the users in the new domain
    Use quotation marks when there are spaces in the file name or password

    Hi,
    From the 7.x(y) Staging Guide:　
    Common Steps Required before Migrating any ICM ComponentOn the Domain Controllers:
    Confirm that Domain Controllers have been upgraded from NT Domain to Windows 2000Active DirectoryOn the CallRouter Server:
    　\RouterA\Router\CurrentVersion\Configuration\Global\DBMaintenance.
    Note:
    If moving a CICM with SideA and SideB disable the Configuration changes on bothsides.
    On the Logger server:　
    Copy the Domain Conversion Tool (DomCvt.exe) from the ICM 5.0(0) or ICM 6.0(0) Third-PartyTools CD as applicable (Domain Conversion Utility folder) onto the Logger server.
    Export the ICM user list using the DomCvt tool using the following command:
    domcvt /DB:<instancename>_sideA /F:c:\DomConvert\userlist.txt /M:E.
    And then lower down in the guide:
    On the Logger server:
    Step 18
    Run the Domain Conversion Tool to convert the ICM users exported earlier, using the followingcommand:
    domcvt /DB: <instance_name>_sideA /F:c:\DomConvert\userlist.txt /M:C /OD:<old_domain_netbios_name> /ND: <new_domain_netbios_name>Note: You can use the /p option to create a global password. If you do not use the /p option,the password is reset to null.
    I'm looking to run this myself shortly. The only caveat with this info is that its extracted from the section related to ICM5 and migration from multiple to single forest ... so possibly not the correct info. However, there's not much documentation on this as you've seen!
    Jed

  • Error logging on Report Conversion Tool (XIR2)

    Hi,
    I am unable to log onto Report Conversion Tool although I have supplied all the details correctly.
    I am getting following error message :
    [repo_proxy 16] SessionFacade::retrieveRights - java.lang.Exception: IInfoObject has not been found
         at com.bo.repo_proxy.SessionFacade.retrieveRights(SessionFacade.java:317)
         at com.bo.repo_proxy.SessionFacade.extractSessionInfo(SessionFacade.java:189)
         at com.bo.repo_proxy.SessionFacade.openSession(SessionFacade.java:129)
         at com.bo.migration.MigrationApp.<init>(MigrationApp.java:349)
         at com.bo.migration.MigrationTool.login(MigrationTool.java:321)
         at com.bo.migration.MigrationTool.<init>(MigrationTool.java:119)
         at com.bo.migration.MigrationTool.main(MigrationTool.java:390)
    IAuthentication method used  is Enterprise.  BO version I am using is BO XIR2.
    Could someone please help me to get this resolved. Help will be highly appreciated.
    Regards,
    Mukesh

    Have you installed the RCT on the server hosting the CMS service or via a client? I have had this problem myself and resolved it by installing / working directly on the server.
    Hope this helps...
    Martijn van Foeken
    Focuzz BI Services
    http://www.focuzz.nl
    http://nl.linkedin.com/in/martijnvanfoeken
    http://twitter.com/mfoeken

  • MySQL to SQL Server Conversion Tools

    Anyone know of any FREE database conversion tools?

    It's not a tool, but you might find Microsoft's documentation helpful.  You might also post this question in a Microsoft SQL Server specific forum.
    "Migrating to SQL Server 2008"
    http://www.microsoft.com/Sqlserver/2008/en/us/migration.aspx

Maybe you are looking for

  • Web.show_document working with abnormal parameter

    I was opening some web pages from forms 10g using:      web.show_document(url, '_blank'); in a button pressed trigger. That worked fine, except it continually opened new pages. If the button is pressed 10 time, 10 pages opened one after another. I wa

  • 3d parsing error in acrobat 8.2

    Hello I am using Acrobat pro 8.2.0 I have been able to create 3d pdf files in the past but now I am getting 3d parsing error. I get this file that I have created in the past and opened succeessfully. I don't know what has changed on my system to caus

  • Are there any Good File Managers Like iFile for Jailbroken Devices that are Free or Cost LESS then $34 for Mac?

    I'm looking for something that i can use to tranfser Video's to my Mac Mini. I have iFile for my iPhone but it's jailbroken so I'm looking for something that is Close to this that's free or something that's not Costing $34. 

  • DSN report type

    I want to get the report type of a DSN message if it is delivered or failed receipt. There is internet header called "Action" it gives that information. getHeader("Action") returns "delivered", "failed".... But to reach this header I have to open mes

  • Migrating to new server subscriptions are missing

    Hello, I have an instance of SQL Server 2008R2 running on Windows Server 2008.  It is setup to be a reporting server.  There are many subscriptions that are scheduled and run on this server.  We are wanting to move to Windows Server 2012 and SQL Serv