CSS transitions not working on iPad

Hello..
My CSS transitions are not working on the ipad at all
After a little research i'm wondering if this has to do with the z-index property of the elements i want to animate.
Could anyone tell me if i'm completely off-direction and/or what might be wrong.
The tabs on the bottom left corner of the page are supposed to animate up and display content, but they're not working at all... (work fine on desktops though)
http://tinyurl.com/transproblemipad
Thanks so much in advance of any guidance
Katrina

Hi Nancy,
Thanks so much for taking a look.
Oh no
If it's not one thing, it's another. Hahaha...
Ok.. back to the drawing board.
Question: For this project, would you recommend providing separate CSS/using jquery to animate those sections under certain conditions only, or changing it alltogether and using jquery to animate the sections for all screens/devices?
Hope that question made sense...
Katrina

Similar Messages

  • Photos transition not working on iPad

    Updated my MBPr last night and all seems well there. Changed settings to store all on iCloud (and manage space on laptop).  iPhone 6 Plus also updated and seems to be working just fine - best I can tell is that all the photos in Photo on the Cloud are available on the iPhone.  The iPad Air 2 seems to be a different story. I updated it and have the settings the same as the iPhone.  It deleted the photos from the iPad, except for 5 that have hung around.  I took one more photo on my iPad with HDR, and deleted two of the original 5, so now I have the message "4 photos, 7 photos to upload".  Message makes sense, but the action isn't happening.  Back at home this evening, all devices on the same wifi, and no progress.  I've cycled the photos option in iCloud a few times and it seems to have no impact.
    Suggestions?

    i had all enabled on all three devices until changing the iPad last night to see if it would get photo stream. For some reason the iPad doesn't seem to upload or download. Wasnt an issue prior to updating the MBPr and IOS on my iPhone and iPad a few nights ago. All updates went thru with out any errors and the system seems to work just fine on the MBPr and iPhone. The ipad seems to be stuck in limbo.
    i have an iTouch that is used for completely different things. I'll go get it today, do the updates and see what results I get with it.

  • Multi gestures not working on iPad Air ios8 onwards

    Multi gestures not working on iPad Air ios8 onwards. Turning gestures off then on works briefly. It's annoying. Is the Air bust? In for rep-air?

    MMine has not been working ever since ios8 update. Apple blamed a game I have on the iPad, however this problem occurs on all apps including apple own brand.
    ITs it's almost like they don't care
    come on Apple sort this out !! It's been too long

  • Printer not working following iPad uodate

    Printer not working following iPad upgrade

    Hi,
    Is the printer not mechanically working or are you having a problem with printing wirelessly from your device? Was the upgrade to the ipad software or did you get a new ipad?
    Try restarting your apple device - It's a simple fix that sometimes helps re-establish the connection to the printer.
    Other things to check would be that there have been no recent changes to the wifi password.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Flash Variable is not working in Ipad

    Hi Experts,
    I'm facing with an issue, could you please suggest me your valuable suggestions.
    I have created Two dashboard (Example names A1 and B1), I need to open the dashboard B1 without asking credentials, when I select an Image in A1.
    To work in such a way, I have created a flash variable and pointed the range to cell J1.
    I have placed a URL button on top of image in Dashboard A1. I have copied following URL in a cell, and this URL I have pointed to URL Button.
    URL= (="../../../Xcelsius/opendoc/documentDownload?iDocID=M1TVABCADjs2AHoAlg123AAgoBpgwAAAA&sIDType=CUID&CELogonToken="&J1)
    Opening B1 dashboard from A1 is working fine in desktop and in Android tab, but it is not working in Ipad. Not working in Ipad in the sense a new browser window is opening with empty page.
    I have tested in another way like, passing opendocID and Flash variable to the URL button, It is working fine in Ipad but asking for the credentials.
    Experts could you please suggest me some solution.
    Ipad is Ipad2 and BO Version is 4.1 SP4.
    Thanks & Regards
    Karthik M

    Hello,
    You hyave to use the special flash variable "CELogonToken"
    Would request you to check http://scn.sap.com/docs/DOC-36362   this is a SCN document
    with title "Step by step way to create parent child dashboard in BI 4.0/4.1 using flash variable".
    SWF loader is not supported for mobile.
    Best regards,
    Mohamed AISSA.

  • IN USING IPAD, ITUNES NOT WORKING ON IPAD 3?

    ITUNES NOT WORKING ON IPAD 3?

    What exactly is the problem?
    The iTunes App on your iPad is a portal to the iTunes Store for music and videos.  It needs a connection to the internet (either WiFi or cellular) to work.
    To play music on your iPad, use the Music App.  To play videos on your iPad, use the Videos App.
    If you need help using your iPad, look at the iPad iOS 5.1 User Guide

  • Letter F not working on iPad

    Letter F not working on iPad 2..have to press real hard to get it working

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.

  • HT1349 Stylus not working on iPad

    Rubber stylus not working on iPad

    it could be that the stylus is just bad.  I have used cheap rubber ones before and found them to be horrible..

  • The smtp outgoing server which works for Ipad will not work for iPad mini?

    Why would the out going server which works for iPad not work on iPad mini

    Mike found this from the website from your email provider make sure your using the imap server unless you want to use pop on your device.
    Incoming Mail (POP3) Server:
    pop.bellaliant.net
    imap.bellaliant.net
    Outgoing Mail (SMTP) Server:
    smtp.bellaliant.net
    imap.bellaliant.net
    Incoming Mail Server Username
    Your full e-mail address

  • Auto keyframe and auto transition not working

    auto keyframe and auto transition not working and I have a creative cloud, in addition the auto keyframe works in the getting startel lessons....

    In order to use these you need to have the autokey frame and transition selected
    OFF   ON
    and have the first key checked then move the playhead to the new position and it should add the transition.
    Did you try this and it is not working?.

  • ICloud Synchronization not working between iPad first gen 5.1.1 & iPhone 4S 6.0.1?

    iCloud Synchronization not working between iPad first gen 5.1.1 & iPhone 4S 6.0.1?

    I can see the acknowledgement that this issue will be fixed in the 'next' software update. Considering the original post was for an iPad 2 running 5.0.1, I am not sure if this issue on iOS 5.1 which runs on my new iPad (4G) is considered fixed. As I reported in my previous post it is impossible to update individual tracks. I also tried adding entire collection to a single playlist, shuffling the playlist. While shuffle is in progress, turning to the 'list' view that allows tracks to be rated does who the currently shuffled playlist and the currently playing track and assigns the rating to the track correctly. However, as soon as the second track plays, switching to list view (which displays the ratings) lists only the tracks from the currently playing track's album. Which is insane IMHO.
    So, was this not fixed with 5.1 update? Or the iOS 5.1 will get it's own piece of update on this?

  • Quicklook (jpg) is not working in iPad Air

    Quicklook (jpg) is not working in iPad Air; only option is airdrop or sharing/opening in the apps - Flickr, Dropbox, PS, etc.

    Are you saying that when you receive an email that has a photo attached you cannot see it in the Msil app?
    Try quitting the mail app and then reset the iPad.
    Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Icloud drive not working on ipad 3

    iCloud drive not working on iPad 3. works fine on my MacBook Pro and iPhone 6. Utterly useless on iPad 3.

    Hi there Chris Howlett,
    Depending on the issues you are experiencing, you may find the articles below helpful. 
    Get help using iCloud Drive
    iCloud Drive FAQ
    -Griff W. 

  • Polarioid pogo printer not working with ipad and iphone

    And I can not believe how that truly *****... I am traveling through the states and bought the pogo to print on the road... Only to find out that it does not work with ipad and does not work with iphone... Unless I jailbreak my phone which I don't really want to do...
    Apple wants us to go mobile and clouding and all those things, yet, when we do go mobile and try a mobile life style, we are encountering so much technical crap that we loose the will to live...
    I could have spend the hundred dollar for the pogo to have pics printed out in every kiosk in the country...
    WWhen is Apple going to come to its senses about little life savers like the pogo and bluetooth???????
    Is anyone aware of a work around so I can print on the go? And a solution that does not involve a programmers brain because my single braincell is not working while traveling... It needs to be easy!

    To cut through all the rage and anger and "knowing" who wanted what, the Pogo has been out for a year or so, well before Mr. Jobs' passing, and Apple did not make any mention of supporting printing on anything other than Airprint compatible printers.
    Since Airprint is a Wi-Fi/ethernet thing, Polaroid would have to make a significant redesign to the Pogo.  Considering that the first iPhones only supported Bluetooth headsets and Apple didn't provide any indications about increasing Bluetooth support, Polaroid's decision for the Pogo to be Bluetooth was obviously not with iOS devices in mind.  This is why initially Polaroid had links on the FAQ to tell Apple to add Bluetooth printing support (so that in effect, asking Apple to pay for the expenses to make the iPhone compatible with the Pogo, rather than Polaroid paying to make the Pogo compatible with iOS.)
    I come from a photograpic background.  I got the Pogo as soon as it came out.  I quite literally was on Polaroid's website every day checking to see when I could order it.  Having "instant" sticker prints is wonderful at family picnics with all the kids.  While it would be great to be able to get Pogo prints from anyone's iPhone, I stopped holding my breath when Apple announced Airprint, which came well after the Pogo was released.  So I took that as the sign that it was probably never going to happen.  (I knew that the Pogo wasn't iOS compatible when I bought it so not having compatiblity is not a deal-breaker for me.  But, yes, it would be nice.)
    I now use a Polaroid Z340 since it's a 14 megapixel camera that prints larger 3x4 Zink prints.  Polaroid makes the GL10, which is basically a Pogo using the same printer as the Z340.  But it's still Bluetooth only.   So while I sympathize with the desire to have a really compact portable printer like the Pogo, iOS compatibility just does not seem to be on the horizon.  IMHO, it would be more realistic that Polaroid create an app to do Bluetooth printing.  But considering Polaroid's financial issues, I'm not holding my breath

  • Sharepoint 2010 "Choice filter" webpart is not working on Ipad.

    choice filter web part is not working on IPad. whenever we click on filter Icon it shows only loading.
    please refer below screenshot for better troubleshooting.
    Thanks & Regards,
    Rajiv Kumar
    Rajiv Kumar

    Hi,
    Could you provide more details about how the search service doesn’t work?
    Are the search service unable to be started in CA -> Application Management -> Manage services on server? Or did you find it not working when you did searching? If that is the case, could you provide the error about
    it?
    It would be helpful to solve this issue if you provide more details about the issue.
    Best Regards,
    Dean Wang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for