CSS with device view manager.

Hi Gilles
I have a CSS being monitored with a ciscoview device manager but with this I understand that you cannot monitor the server load. Hence I am trying to use the WebNS which provides flow monitoring. I uninstalled the ciscoworks device manager and I am trying to use the WebNS instead. However, I am not able to access it. It gives the error "ciscoview is not installed.? How can I install WebNS after removing ciscoview? I followed the document http://www.cisco.com/en/US/products/hw/contnetw/ps792/products_configuration_guide_chapter09186a008029c574.html#wp1031916
But still gives me the error.
Is there a way of monitoring the server load with Ciscoview?
How do I install WebNS after removing ciscoview?
Thank you
Regards
Sanjith

This URL should help you:
http://www.cisco.com/en/US/products/sw/cscowork/ps4565/tsd_products_support_series_home.html

Similar Messages

Is there a way I can view/manage devices linked to my iCloud account?

Is there a way I can view/manage devices linked to my iCloud account? I know how to view the devices linked to my iTunes account, but I am not sure if this is possible to see with an iCloud account.

You can't, except by seeing if they are using services associated with the account. You could, for example, launch Find My iPhone on iCloud.com to see what devices appear (which obviously wouldn't show devices not using Find My iPhone). Similarly, you could go to Settings>iCloud>Storage & Backup>Manage Storage to see what devices appear on the Backups list (which won't show devices not using iCloud backup).

ITunes 10.5 will not sync to my BlackBerry. I sync's outlook fine with desk top manager, but when I select music DM says connect device. It also tells me to install iTunes!?!? Running XP Pro w/SR3 and BBerry Tourch 9810.

iTunes 10.5 will not sync to my BlackBerry. I sync's outlook fine with desk top manager, but when I select music DM says connect device. It also tells me to install iTunes!?!? Running XP Pro w/SR3 and BBerry Tourch 9810.

LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0), IVIASPI (1.0.0.0), CDR4_XP (8.0.0.212),
UpperFilters: Cdralw2k (8.0.0.212), GEARAspiWDM (2.0.6.1),
hmmmm. you've got rather a lot of burning software entries in there. (it looks like you've got some kind of Roxio product installed, as well as itunes and Alcohol 120%.)
by way of experiment, try the technique described in the following document (remember to take a backup of your device filter registry keys first).
iTunes for Windows: Troubleshooting CD issues caused by device filters
do you still get the itunes message with just the iTunes filters in place?

Users with read access to the site unable to view Managed Metadata Navigation

Hi everyone,
I created a Managed Metadata service and created group, term-set and terms
I gave read access to users
I set up navigation to use Managed Navigation
I am logged in as farm admin and able to view the navigation when i browse site. But user are not seeing navigation.
One thing i noticed is when i give users full access or designer access to site they will be able to see the navigation. but i don't want to give users full access or designer access to the site.
How can users with read only access to site can view Managed Metadata Navigation...Please help?

Hi Sunil,
Have you given your users permissions to actually read the MMS data from the service application?
http://technet.microsoft.com/en-us/library/ff625176.aspx covers permissions on the MMS.
Regards
Paul.
<<edit>> On reflection you might be hitting the issue in this Stackexchange post..
http://sharepoint.stackexchange.com/questions/75636/permissions-and-managed-metadata-in-navigation Is yours behaving the same way?
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

Issue with creating List of Values in Business View Manager

Hi,
Could any one help me to figure out what this issue refers to?
When i created a List of Values in Business View Manager, it is throwing the following error!!!!
The List of Values used by this parameter cannot be based on a Business View derived from the current Data Foundation or Business Element.
Prior to creating LoV, i've done successfully with creating Data connection, Data foundation, Business element and Business View..
Thanks
Viswa

Hi Visaw,
Firstly,
-->Open Repository Explorer,
-->where you are have related DF,DC,BV,BEand LOV's
-->Right click on LOV's -->There you can find Schedule list of values.Then schedule list of values and check if it prompts for errors.
If you face the same problem, what is the error you are getting.
Else try to use the LOV's and proceed further.
-->Check whether the LOV's are pointing to the same Business View and check the Business view pointing to the same Datafoundation.
If you are facing the same problem then try with the below steps:
-->Try to Create a report at designer level Using then Business view
-->Create two new parameters and select the existing parameters(LOV parameter's)
-->Check whether it is working.
-->If you face the same problem ,Update the connection of Business view manager.
Go to Database tab-->Select Set DataSource location and update it with current Businessview Manager.
Try this ,and let us know.
Regards,
Navin

File manager with tree view in main pane?

I'm looking for a file manager with something similar to Nautilus' list view, with a list and tree structure as a main view.
The nautilus one is awesome, but nautilus has qwerks if you don't use gnome (wants to control desktop, panels are very restricted, etc.)
Does anyone know of a file manager with a view similar to this that I can try out?

I've seen a few things on spacefm, and played with it a bit. Took me 3 minutes and 2 segmentation faults to find the setting to change views, and it still doesn't have the ability I want, so still a bit too buggy for me.
Pcmanfm is a good all around filemanager, but doesn't have that feature either.
I played with a slew of file managers one day looking for similar things, maybe I should try that again and branch out further than what's in the repos.
More suggestions?

UCCX Advanced Quality Management with VMware View

Hi,
I have a customer who uses UCCX 8.5 with VMware View clients running CAD and 7940 IP phones.
They are looking at recording options and have expressed an interest in the Advanced Quality Management product.
There are a few issues that I would need to consider specific to their environment.
The first is that Desktop based recording would not work in this environment as CAD is running on a virtual desktop rather than a PC daisy chained to the IP phone. The second is that network based recording is not supported as the 7940 phones do not have a Built in Bridge.
This leaves server based recording which uses SPAN port mirroring. The issue with this is that the agents phones are distributed across multiple Catalyst switches so I guess I would need to configure RSPAN - has anyone got any experience of using Cisco QM with RSPAN? - if yes how well did it work? - the customer would probably be willing to upgrade the IP phones used by the agents if that would be a better option.
The final query relates to the Screen Recording Client - the install guide details how to install this on a Citrix server but makes n mention of VMware view. Does anyone know if support for this is on the roadmap?
Thanks!

Hi James
I've done an RSPAN deployment with UCCX recording which I presume will have similar gotchas...
The only issue I had was that I ham fisted an RSPAN config in that SPANned the VVLAN on all the edge switches. My mistake was that I didn't exclude the uplink ports, and these switches were stacked, so there was a lot of packet duplication initially (sounds like 90s dance music time stretching).
If you ensure you SPAN ingress only on all the endpoints (i.e. phones, and gateways) and then exclude any ports where traffic might be seen a second time (e.g. switch uplinks), and then filter for the voice VLAN you should be OK.
This deployment was a routed LAN with different subnets on each edge stack but this worked OK with everything running through a single RSPAN session back to the server.
I've not had the good fortune to have to do this more than a couple of times, and I've not done it for AQM - but assuming that SPAN/RSPAN are supported along with the video recording part running on the endpoints I don't see it being too different as they seem to be written by the same people.
Can't help re: VMware view either I'm afraid...
Aaron

I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can any one help

I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can any one help

try this and see if it works: connect your iPhone and open up iTunes on your PC. Go to your phone's page. Under Summary page, check manually manage music and videos.

HT4847 Why do I get the answer on trying to open this application, limit reached,want to use skygo on this device visit manage devices to replace a registered device with this one. How do I do that

Why do I get the answer on trying to open the application skygo, limit reached, want to use skygo on this device visit manage devices to replace a registered device with this one. How do I do that. ?

Please see http://help.sky.com/tv/sky-go/register-devices-on-sky-go . Note that if you have in the past already removed one device you will have to wait for a month to elapse before you can remove another.

Device Enrollment Manager and Bulk Enrollment with Apple Configurator

Hello,
Regarding the Device Enrollment Manager and Bulk Enrollment with Apple Configurator features released with Microsoft Intune in november/december 2014:
When will these features be available for the Intune hybrid parity? (Intune + SCCM 2012 R2)
We would really like to utilize the Device Enrollment Manager user account for shared device scenarios and the bulk enrollment feature to deploy multiple IOS devices to classroom iPads but we are "on hold" for now until these features will be released
for the hybrid parity version of Intune.
https://technet.microsoft.com/nb-no/library/dn764961.aspx
https://technet.microsoft.com/nb-no/library/dn764958.aspx

There is no information available about when new features will be released. Probably this will be available in either a future CU, or vNext. Looking at the possible impact of that change, I would guess vNext.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to use Sunray without VDI or VMware View Manager

There is no VDI or VMware View Manager in my test environment. Only srss 4.2 and srwc 2.2 has been installed.
Now i have 5 sunray client and 5 Windows XP VM. How can I let every user use their Windows XP VM in this environment and can enable USB redirection?
In page http://wikis.sun.com/display/SRWC2dot2/Managing+USB+Device+Redirection+%28All+Topics%29
Supported Configurations
Configuration
SRS 5 (SRSS 4.2, SRWC 2.2) and Sun Ray Connector Kiosk Session
Description
Supports connection to Windows desktop using the Kiosk session.
My question is How to let mutipl-user use it in this config
The following is my settings and all users now can use their own Windows XP but USB redirection cannot work
Select Common Desktop Environment (Obsolete) in Kiosk mode add an application:
cam_script.windows_connector,
#!/bin/ksh
# Script to map smartcard token to individual VM using either
# the "User Name" or "Other Info" field of the output from
# utuser -p <token>
# Look at output from utuser -p ${SUN_SUNRAY_TOKEN} and grab hostname
# % utuser -p user.1140788210-7053
# Current Properties:
# User Name = tester5
# Other Info = host
# Server Name = localhost
# Server Port = 7007
# Logical Token = user.1140788210-7053
# User Created = 02/24/2006 13:36:50
# Token Enabled?
# Payflex.500af8ad00130100 Yes
# Currently Logged In:
# Current Desktop = 0003bad7566e
# Desktop Location =
# Logged In Since = 02/24/2006 13:36:58
# Use "User Name" field as hostname of VM to connect to
#VMHOST=`/opt/SUNWut/sbin/utuser -p ${SUN_SUNRAY_TOKEN} | /usr/bin/grep "User Name" | awk '{ print $4 }'`
# Use "Other Info" field as hostname of VM to connect to
#VMHOST=`/opt/SUNWut/sbin/utuser -p ${SUN_SUNRAY_TOKEN} | /usr/bin/grep "Other Info" | awk '{ print $4 }'`
WinHOST=`/opt/SUNWut/sbin/utuser -p ${SUN_SUNRAY_TOKEN} | /usr/bin/grep "Other Info" | awk '{ print $4 }'`
# Could probably do a ping test here and pop up dialogue
# about getting support to check the availability of the
# machine (might event be able to use VC API to power up VM?)
# if it doesn't respond to ping. Could use something like
# dterror.ds, could also pop up different dialogue
# if VMHOST is not set
COLOUR_DEPTH=16
# If using 24bit need registry change under Windows XP
#COLOUR_DEPTH=24
# Fix F11 and F12
#/usr/openwin/bin/xmodmap -e 'keycode 75 = F11'
#/usr/openwin/bin/xmodmap -e 'keycode 76 = F12'
# Fix alt & print screen
#/usr/openwin/bin/xmodmap -e 'keycode 77 = 0xff62'
# Turn on numlock
/usr/openwin/bin/xset led 1
if [ "${WinHOST}" = "" ]; then
 #dterror.ds "Your Windows Machine can not be determined.\n\nPlease contact support and ask for smartcard \n\n${SUN_SUNRAY_TOKEN}\n\nto be associated to a Windows Machine" "Smartcard not configured" "ERROR"
 WinHOST="Windows_default"
fi
# Run Windows Connector in full screen mode at appropriate colour depth with sound redirection
# Disable the windows pulldown header in full-screen mode
# RDP Window Attributes options to disable are:
# -D wallpaper
# -D fullwindowdrag
# -D menuanimations
# -D theming
# -D cursorshadow
# -D cursorsettings
/opt/SUNWuttsc/bin/uttsc -mb -A ${COLOUR_DEPTH} -r sound:high -u "" ${WinHOST}
#if [ "$?" = "0" ]; then
# dterror.ds "Logging Out..." "Log Out" "OK"
#else
# dterror.ds "Your Windows Machine ${VMHOST} is not visible on the network.\n\nIf you have just restarted it please wait a minute and try again\nIf you still have problems get help" "Windows VM is not available" "OK"
#fi
# End of CAM script
Then add IP address in other information of Token.

Meta Kiosk would certainly do what you need and the USB pass through works.
http://blogs.sun.com/danielc/entry/meta_kiosk_how_to_run
I think the problem you are running into is that you are using uttsc inside a Solaris environment as an app, looks like CDE, which isn't being supported to my knowledge to avoid conflicts between the two desktops. It is designed to work out of the box with SRWC kiosk mode.
The undocumented way to turn it on is to turn usb on by adding -r USB:on as an argument.

Trouble styling across device views ( Mobile, Tablet, Desktop) in fluid grid layout.

Hi pros,
I’m having a problem in Dreamweaver CC laying out and styling my website using the fluid grid layout. For the record, I have not touched the boilerplate.css or JS file and have been using my own.css file to place all my .css in. I’ve managed to get some of the content in little by little but it looks nothing like my mock up. Since I’m new to Dreamweaver and coding in general, I’ve been starting my design in the desktop view. However, when I switch to tablet or mobile view and move something around, it completely moves it when I got back to the desktop view. Also, when I put in on live view or view it in a browser, I get two different looks all together. I try to make sure that my .css file is selected and under media I tried selecting the predefined media sizes and then under selector, there is usually 3 of each tag (one for each view I’m guessing), I select the tag associated with that view and change the properties from there. That hasn’t worked because when I go to live view or view in the browser, it looks completely off or it will screw with the other views. L
So here are my specific questions:
How do I style my elements specifically in each view WITHOUT messing up the desktop, or the other views? Simply clicking on a view using the icons on the bottom and styling has not worked.
Why is my live view so different from my browser view? I’m using the presets given in Dreamweaver for the desktop. When I view, say the logo and navigation in live view, everything is aligned but when I switch to my browser (chrome) it’s all crooked.
Should I be using % throughout all my properties (width, height, margin, padding, positioning)? Currently I have most of my div sized using % but some margins and other properties using px. Will that affect anything?
Can someone recommend a good tutorial? Everything that I seen either covers the basics that I already know,( adding/moving divs, switch views) but when it comes to the .css styling, they are adding a style sheet from somewhere without showing you how to do it from scratch.
Should I design the page in a non- fixed layout and then import the .css style sheet from there? If so, how do I do that without messing with the boilerplate.css file.
I’m taking a course in graphic and web design and we went over this very quickly and was given a lot of the material, however our final project (a full website with 5 pages) must be responsive and built in Dreamweaver. Any advice is greatly appreciated!

Making an external style sheet.
Go to File > New > Blank page > CSS.
Hit create button.
Add some style rules to your new style sheet and save it.
Link your HTML pages to your new style sheet using the directions below.
Dreamweaver, Linking HTML to External Style Sheets
CS6 Fluid Grid layouts (17 min video)
http://tv.adobe.com/watch/learn-dreamweaver-cs6/using-fluid-grid-layouts/
Creative Cloud 12.2 Enhancements to Fluid Grid Layouts
http://blogs.adobe.com/dreamweaver/2013/02/updated-fluid-grids-in-dreamweaver.html
Step-by-Step tutorial -- Building Fluid Grid Layouts in DW CS6
http://www.adobe.com/inspire/2012/08/fluid-grid-layouts-dreamweaver-cs6.html
Nancy O.

MAM Client - Only User View Manager Link Visible

Hi,
I have followed the configuration steps as mentioned in the configuration guide for MAM2.5 SR2.
but after deploying the application in mobile device, Only the User View Manager Link is visible to me.
Details about client and server version is as follows
1. MI client 2.5 SP11
2. WebAS Server 6.40 SP09
3. Backend IDES server
Only thing which I am not sure is whether the plugin
R/3 Plug-in 2004.1 SP01 for Mobile Asset Management 2.5 is added in the Backend or not.
Is there any way to check whether the Plugin is added or not?
Also Could this be a problem why we are not able to see other menu specific to MAM?
Appreciate your help in providing some solution for the above mentioned probelm.

HI sathya,
in my last post , actually i was talking about
WAS sp 09 and client sp 11.
 not sure , whether sp11 client can successfully sync with sp09 WAS.
it might be one of the reasons?.
have u changed ur application ?. or using the standard application?.(i mean added syncbo's or not).
 just check the meRepMeta.xml file , is there any reference to MAM25_090 (item).?
 just change the trace to Information and after sync,
just look whether there is any MAM25_090 reference in the log.
Sathya just check,,
1) meta_childRow.dat
2) meta_topRow.dat
3) meta_field.dat 
 if there is no data in MAM25_090 , there will not be one MAM25_090.dat file in the data directory.
just check in the
meta_childRow.dat ,
MAM25_090 entry got created or not in the folder corresponding to the first sync.
 Regards
 Kishor Gopinathan
Message was edited by: Kishor Gopinathan
Message was edited by: Kishor Gopinathan

(ios5 ipad bugs)I can't get changes of album art, artist, album and other tags to show up in the iPad music player, but they show up correctly in the iTunes device view. Certain random songs do not sync correctly. Wifi sync hasn't worked yet.

(ios5 ipad bugs)I can't get changes of album art, artist, album and other tags to show up in the iPad music player, but they show up correctly in the iTunes device view. Certain random songs do not sync correctly. Wifi sync hasn't worked yet.
I mostly use technology for education and professional audiovisuals and lights.
I don't sync music because I use music from at least 4 different computers. (manually mange music)
I use my iPad to play performance tracks for church and a local gospel group out of our church, Won4Christ.
I chose to buy the iPad because the laptop of one of the group members (dellxps running iTunes) was randomly losing and mixing up music and I wanted a more stable option that was bigger than my iPod touch.
I tried to add some data to music libraries that I previously added to my iPad, but the data only shows up when looking at the device in iTunes.
Wifi sync has not worked on either my laptop or desktop ( both running windows 7 enterprise 64 and newest iTunes) not really a big issue, but very annoying
When browsing through library playlist albums on the iPad, random artwork shows up on playlists with no artwork that you touch while dragging, and it does not go away until you change to another navigation tab and back.
Random songs out of hundreds that I added showed up in iTunes grayed out with a sync circle beside them. Those songs would play back okay on the iPad but were unplayable through the iTunes device view. I had to delete the songs manually through the library along with the playlist and add them again.
These seem to be major stability bugs in the "new" music app and iTunes. My only option right now seems to be to delete the songs that I want to change and re-add them with the changes already applied rather than changing the id3 tags and artwork on the existing music. I hope apple will release updates to resolve these issues.
Thank you for actually making it to the end of this manuscript of annoyances.

Just wondered if anyone had any other suggestions.

Clearing GL with Open Item Management

Dear Experts.
A liability GL (Remuneration Gl account) has been created by the client in the system without open item management. After that several entries has been posted in that GL account. Few months back they have activated Open Item Management for that GL using a program.Now they want to clear few entries in that GL account and while clearing the GL in F-03 system is displaying an error
Document splitting: Items for clearing 1000/9300000661/2012/001 not found
Message no. GLT0002
Diagnosis
Document splitting cannot perform clearing because it was not possible to find complete splitting information on the items to be cleared (company code, document number, fiscal year, item).
System Response
Clearing cannot be performed and the document cannot be posted.
Procedure
Exclude the affected item from clearing.
It may be that this item was not posted with active document splitting. In this case, this item or document would have to be migrated.
This error occurs due to the Open Item Management activation in the GL after entries were posted.
Now the client wants to clear few entries in this GL account for which Open Item Management was activated recently. The client is not willing to create a new GL and post transfer entries. Is there any other possibility to clear this GL account.
Please provide your valuable suggestions.
Regards,
Ramprasath

Hi,
The reason for the error GLT0002 is that there is no values for
document in tables FAGL_SPLINFO and FAGL_SPLINFO_VAL
Regarding the clearing process in the FAGL_ACTIVATE_OP:
The clearing of the 'old' items is the standard process in the report.
Here is the part from the documentation:
(Please review the documentation on FAGL_ACTIVATE_OP via se38
enter in FAGL_SWITCH_TO_OPEN_ITEM view documentation)
The system then activates open item management and clears all existing
open items. After this clearing, you have the option of having the
system repost the amounts that were initially written off.
This is done to start newly with the OI management once it is activated.
So if you want to activate the OI management for an other account in
your system, please take into account that the clearing should NOT be
opened again in standard.
I would request you to please read the documentation in SE38 for FAGL_SWITCH_TO_OPEN_ITEM
and please check whether all criteria's are fulfilled or not.
I hope this helps.
Regards
Eugene

CSS with device view manager.

Similar Messages

Maybe you are looking for