CSS11000 does not take config after reboot with new image

CSS11000 was upgraded with new IOS image.
However, it did not take the current config (which was 'wr m') when rebooted from the new image. It seemed to have taken the config from another disk partition -?!. We had to revert back to the old boot image....then it worked (with the right config).
Being unfamiliar with CSS's, I'd appreciate any expert's hints on this. Thanks!

When you upgrade/downgrade to a version you have previously run, the CSS will restore the config you had when you ran that version the last time.
I haven't bothered to check the docs or figure out myself, how to disable this behavior.
I just get a copy of the config via FTP before i boot the new version, and then i FTP it back and reboot again, this usually works although i have seen it dump the config ones.

Similar Messages

  • ADFS 2.0 service does not automatically start after reboot

    Hello,
    We have two ADFS 2.0 servers in a farm.  Any time these servers reboot, the ADFS service does not automatically start, even though the service is set to auto start.  If I manually start the service it starts within 10 seconds.
    The error in the logs show:
    A timeout was reached (30000 milliseconds) while waiting for the AD FS 2.0 Windows Service service to connect.
    The AD FS 2.0 Windows Service service failed to start due to the following error:
    The service did not respond to the start or control request in a timely fashion.
    But after the reboot is completed, I can manually start the service with no problems.  Again, this ONLY happens on restart.  I've searched the forums and found potential solutions for people who have consistent issues with starting ADFS every time.
    Any ideas?

    UPDATE - I built a 3rd ADFS server and was unable to reproduce the problem, until...
    I went in to the service properties of ADFS and saw that even though I specified a Log On As account during the ADFS wizard, it changed itself back to "Network Service".  I re-entered our ADFS service account username and password, it was
    accepted, and I rebooted.  On the next reboot, the service did not start automatically (with the same errors as the other ADFS servers), but I was able to manually start it.
    I then went to the original ADFS server having the problem, switched it to use "Network Service", rebooted, and the service started up properly on reboot.  I then changed it back to the named domain service account, and the issue came right
    back.  There are no other errors in the System Log indicating a problem with anything else.
    So my guess is that something is happening to prevent the service from starting with the named Domain account on server reboot.  But what?

  • Z510 : bluetooth does not connect but after reboot

    Hi, My Z510 never connectss to bluetooth but after a reboot. Activating/deactivating bluetooth does not work. Any tip ? Cheers,/D

    I received the following response from Nokia support:
    "Thank you for emailing the Nokia Care Center.
    In response to your inquiry about your Nokia N8-00, we would like to inform you that even when you set the automatic connection between the two devices, you will still need to connect manually because the Automatic connection is used for you to not to enter a passcode anymore whenever you connect your device to your Bluetooth device. For verification, visit the link provided below and kindly go to page 98:
    http://nds1.nokia.com/phones/files/guides/Nokia_N8-00_UG_en.pdf
    However, rest assured that your suggestion will be taken into consideration for our future reference. We are hoping for your understanding and patience regarding this matter.
    If you have any additional questions, please do not hesitate to contact us again. To ensure proper handling of your case, kindly continue using the current subject line.
    You may check out all the phones and accessories and purchase them online through www.nokiausa.com. For further inquiries, you may call our Sales Department at 1-866-596-6542 and we will definitely be of assistance in finding the product for you.
    Thank you for your e-mail."
    In summary, Nokia thinks this annoyance is an intended "feature". This issue is NOT solved.

  • My Mighty Mouse does not turn on after reboot after my Snow Leopard upgrade

    I am having issues with my wireless mighty mouse, it does not turn on automatically like it used to and now I have to turn it on and off for my Mac to see the mouse again. It will them connect any help?

    Hello dw:
    For future reference, there is a Bluetooth forum here:
    http://discussions.apple.com/category.jspa?categoryID=145
    Also, go to system preferences>bluetooth. Highlight your mouse. Click on advanced. Click on the little gear at the bottom>show more info. Then click on the gear again and make your mouse a favorite.
    If that does not help, try trashing a preference file (com.apple.bluetooth.plist) and restarting.
    Barry

  • Oracle does not start automaticly after reboot

    I've installed O 9i on win2ksrv after installing DB2.
    Then I create a database and this db starts successfully.
    After reboot the database is shutdown and can only starts manually by sysdba.

    Hi,
    Have you checked the space of ORAARCH or SAPARCH folder/directory ? The problem may be "Archive destination full".  If its full then try to move some old Offline redo log file to other safe location as a backup and then try to restart the Oracle Instance again.
    Regards
    Bhavik G. Shroff

  • LightRoom 2.3 Does not show up in "open With" when image right clicked..Why?

    Hi,
    I noticed that when I right click on an image and highlight OPEN WITH LightRoom does not show up as a choice.. Just CS4 and other programs. Is there a way to get it to show up?

    You can do it. Right-clicking and "opening with" LR is no different than dragging a file from Windows Explorer into the grid view. In either case the import dialog will be launched. If it's already in the catalog you'll get that dialog.
    Windows is seemingly unpredictable from time to time as to adding file associations to the context menu. In any case, if you go to the bottom and click "choose program" you can select LR from the expanded list, or navigate to find it if necessary (which shouldn't be necessary).
    Typically once you choose it once, it will continue to appear in the short list for that file type, though it depends what new pieces of software you install and how they're associated with file types either upon or after installation.
    You can also drag the file(s) from your Explorer window into the grid view, or drag onto the LR icon on your desktop or in your quick launch, which will launch LR and bring up the appropriate dialog.

  • Photoshop CS4 does not recognize raw photos taken with newer cameras. Anyone else have this problem?

    Photoshop CS4 will not recognize RAW2 photos taken with my new Panasonic Lumix FZ100 camera. This camera is listed in Adobe's 6.2 Camera Raw update for Photoshop CS5 but cannot be loaded in CS4. I paid a lot of money for CS4 and don't want to buy CS5 just because I bought a new camera, but it appears that Adobe no longer updates Camera Raw for CS4 or with newer cameras. When I called the Help Desk to find out if there was some kind of patch I could get to make CS4 compatible with my new camera a gentleman in New Delhi informed me that he couldn't even answer my question until I paid $40 since answering questions about CS4 was a "paid service." I hung up in a rage. Does anyone else have this problem and is there a solution?

    This camera is listed in Adobe's 6.2 Camera Raw  update for Photoshop CS5 but cannot be loaded in CS4.
    Adobe does indeed not update obsolete versions of Camera Raw for new camera types.
    And guess what: It’s the camera producers who seem to like to change their raws – so how about spreading some of your indignation their way?
    I paid a lot of  money for CS4 and don't want to buy CS5 just because I bought a new  camera
    The upgrade is cheaper than buying the full version.
    Anyway, you could try the free DNG Converter which should be able to handle everything the most recent version of Camera Raw can handle.
    Edit:
    http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh&promoid= HTENC

  • When editing externally (Smart Photo Editor) , LR5 does not stack, show or updates the new image in the catalog

    I am using  the latest version of Smart Photo Editor to edit in external editor from LR5. On LR4 the new image appeared in the catalog, not so with LR5. I have to go to the folder and Sync it so the image appears. Then all my other images are compiled and i will only see that one image which is the "latest import". MAybe something on the settings?

    i found LR5 the most bug infested LR version ever.
    i "use" it only as test setup.
    real work i still do with LR 4.4.
    dav_miller wrote:
      How does this issue get reported to Adobe as a bug or is the fact that it is in the forum take care of that?
    nope.. in this forum you will only hear that this is not such a big issue and will be fixed soon.
    honestly im waiting for some bugs to be fixed since v3.6..... and i gave up on reporting new bugs to adobe.
    i just hope that some day they will be fixed.
    there is a text layer bug in photoshop i reported back in 2011 and that´s still in photoshop CC.....

  • ITunes does not recognize iPhone after reboot

    Windows XP SP3, iTunes 10.6.1.7, iPhone 3g v.4.2.1
    Running on a Windows XP machine, iTunes will not regonize any one of 3 iPhones plugged in to any one of 4 USB ports using any one of 3 different USB cables. 
    If I uninstall, then reinstall iTunes from its setup file, all the iPhones are recognized on any USB port with any cable and all can sync successfully with no errors.
    But, if I reboot the machine, iTunes no longer sees any of the iPhones plugged in to any of the USB ports again even though they appear as devices under My Computer and you hear the normal two tones indicating successful device connection.  The only way to have the iPhones appear in iTunes is to uninstall and reinstall iTunes again each time after the machine is rebooted.
    Does anyone have a suggestion as to what could be causing this and how it can be fixed?
    Thanks,
    Chris.

    Thanks for the suggestion.  I tried stopping and restarting Apple Mobile Services, Bonjour and iPod services but it had no effect.  The problem still remains - everything works for all 3 iPhones immediately after reinstalling iTunes but none of them can connect with any of the USB cables after a reboot.  This problem is still present as of upgrading to 10.6.3.25.
    BTW, I do have other choices.  I can become disenchanted with the product, use it less and less, then eventually migrate over to some competitor's product.
    Cheers,
    Chris.

  • Bookmarks get changed randomly / Bookmarks Bar does not stay showing after reboot

    This is a brand new installation of FireFox 17.0.1 download directly from Mozilla. The previous installation was completely removed using Revo in an attempt to find the cause of this problem.
    I have my bookmarks saved to a .json file so after full installation of FireFox, I rebooted the computer, came back into FireFox, enabled the Bookmarks Bar and imported my Bookmarks. Looks good so far. Then I shut it down and rebooted the computer. The bookmarks are gone, the FireFox size is back to default, and the Bookmarks bar is no longer showing.
    In my previous installation, sometimes the bookmarks were there, sometimes they weren't. But even when they were, the actual URL that the bookmark was supposed to go to had been changed to some site that was opened at some point during the previous session (but not bookmarked).
    The same types of problem do not occur in Opera, Safari, Chrome, or IE so I don't believe it is anything interfering with the saving of customizations.
    Anyone have any ideas?

    Bookmarks shouldn't have been changing by themselves. Your places database (which stores history and bookmarks together) might have been corrupted. Your new installation should not have that problem, at least not right out of the box.
    Sometimes Windows permissions, files in use, or other factors can cause Firefox to lose changes or start up incorrectly. This article might help: [[How to fix preferences that won't save]].
    Are you just running the standard release of Firefox directly on Windows? In other words, I assume:
    * It's not the "Portable" edition of Firefox.
    * You are not using sandboxing or virtualization software that isolates Firefox from the system.

  • Touchpad does not retain settings after rebooting on Equium series

    the touchpad on my equiem is too sensitive, I can adjust setting and works fine for that session but when i reboot it returns to default, i have saved the settings etc but still wont stay set

    Hi
    Its strange and not usual.
    Did you try to reinstall the touchpad driver???
    Try to download and to install the newest version of touchpad driver from the Synaptics website and please repost the results.

  • Does not load pictures after updating with latest version

    I have windows 7 and just updated the latest version of firefox. Since I did this, none of the pictures load in my email.

    See:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    If images are missing then check that you aren't blocking images from some domains.
    *Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    *Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    *Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"

  • IPhoto does not recognise camera since synching with new iPhone

    Ever since I've setup my new iPhone, Iphoto will not recognise my camera (Panasonic DMC-FX36); even though it recognises the iPhone camera OK. I've previously used the Panasonic camera without a problem and this has only started happening since synching the iPhone for the first time (not sure if this is coincidence or not).
    I can't find anything in iPhoto that suggests any settings have changed... I've also tested an older camera (Canon iX series) and found the same problem.
    Most frustrating as I have a heap of photo's of my newborn daughter and no way to share them... and a sinking feeling that I may lose them... any suggestions appreciated.
    Cheers

    Thanks, I should have mentioned that I've tried Image Capture without luck...i.e. no device connected. The Camera actually asks for the prompt PC or Pictbridge... I've always selected PC, now the camera just freezes after I select the PC option... I have a card reader in my printer, but same problem, device not recognised.... Do you suspect it would be the camera or the iPhoto app?

  • Sync does not work on htc desire with new android upgrade

    upgraded to the new android firefox, had to re sync my device. And none of the bookmarks have transferred over. Left it 24 hours and still none of my bookmarks. tried clearing my sync data and redoing, no joy. This is on an HTC Desire.

    Hi!
    Sorry to read that you are facing issues with the new Beta. Indeed there's a known issue with having the new Beta with other sync versions in Android. You can learn more here:
    https://wiki.mozilla.org/User:Anaaktgeboren/NativeSync#Android_Sync_behavior_with_multiple_Firefox_versions_installed
    Make sure that you don't have any previous Firefox version in your phone to make it work.
    Let me know if it works.

  • HT1414 my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

    my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

    I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped

Maybe you are looking for

  • How do I change the midi staff style from piano (i.e. bass and treble clef) to a drum score?

    Is there a way to change the staff style in Logic Pro 9 from piano to drums? In the score window I have tried selecting layout then staff styles... then clicking the downward arrow next to piano and changing to drums (but there is no box to select ap

  • IPad VGA adapter, picture is dull & pink connected to my projector

    I'm having a problem with my VGA connector, and I desperately need a fresh point of view in this issue. When I connect my iPad to my projector, the picture has a dull reddish, pinkish hue to it. This is true for everything- video app, Netflix, slides

  • Imported VHS-C Footage Includes Codes

    I have a couple of dozen VHS-C tapes that I want to capture in iMovie to create a library for future video projects. No longer having the original camcorder, I bought a JVC camcorder from eBay, ran the S-video and RCA audio to a Sony Digital Hi8 camc

  • Email Scheduling Question

    I'm wondering if you can set up email distributions to email addresses that aren't on the same domain as the sender.  Here is what I have for the settings in my Adaptive Job Server. I have also created a publication with the following settings: I hav

  • Under Yosemite Spotlight doesn´t find my files

    Under Yosemite Spotlight doesn´t find my files on the computer and connected hard drives. What can I do?