CSS11501 VIP just stops after a day or two

We have a CSS11501 that we are using to frontend an oracle colaberation suite cluster of unix servers. There are two servers in the first cluster. I have set it up to have a single load balanced vip with the following content services (http, imap, smtp, port 7777, and port 9401). Two other servers have a different load balanced VIP for their http and LDAP funtions. We are trunking in from a Cat3500XL switch the two vlans (10 "public" and 250 "private server") via the gig interface. It works fine for about a day or two then the VIP just stops responding to any traffic. We have done dumps on the servers and they are not getting any traffic through at all. Each server has a seperate VIP & source group set up as a straight pass through for maint access, these continue to work fine. I have tried stopping and starting the services, content rule, and source groups. even totally deleting the VIP and recreating it does not work. Rebooting the switch was of no help as well. If I recreate all of the content rules on a new VIP and assign the services it comes up fine but the old VIP address just stays dead. It is almost like the VIP has a limited lifespan and then shuts down. Any suggestions would be helpfull as this is a new technolagy for me. Thanks.
Burke McCrory
Internet Administrator
Oklahoma Tax Commission

you will have to capture a sniff in front of the css to see if it is receiving traffic for the vip.
You can also do a 'sho summary' and see if the hit counter is increasing.
Then check the upstream device and verify the mac address associated with the vip.
Make sure the L2 cam table is pointing to the CSS.
Do you have redundancy turned on ?
Finally, not sure what is the colaboration suite exactly, but if this is a software loadbalancing tool, you may want to stop using it if you have a CSS. Simply configure the server independent from each other.
In the past we have seen many issues when trying to combine both software and hardware loadbalancing.
Gilles.

Similar Messages

Recorded FLV just stops after a random time

Hello:
I have some long (1 hour or so) flvs recorded from a small
flex app communicating with FMS 3.0.0. It is mostly audio.
When replaying them from
- a client Flash OR from (Method A)
- FMS and then have a Flash client connect to the FMS Live
stream (Method B)
The stream just stops after a while (variable: could be after
2 minutes or 20 minutes). It is very reproduceable which makes me
wonder how come others are not getting this as a google search does
not show other complaining.
I get an Unpublished and then Stop status on the Flash Player
for the stream.
Strange thing: If I play the stream direct from a player
(Method A above), then the higher the BufferTime and the longer it
takes to stop. With a buffer time of 5 seconds, it plays without
stopping.
I actually need to run it with Method B. Setting all kind of
buffers on the server produces no noticeable results.
Any idea?
I can send you my simple test codes for Flash player, FMS and
the flv if need be.
Thank you

quote:
Originally posted by:
peterflex
The stream just stops after a while (variable: could be after
2 minutes or 20 minutes). It is very reproduceable which makes me
wonder how come others are not getting this as a google search does
not show other complaining.
I get an Unpublished and then Stop status on the Flash Player
for the stream.
Were you ever able to solve your problem? I have the same
issue. Thanks,

Okay, let's say you bought an album and there are a few songs on there where you only have half the song(the song just stops after a number of minutes/seconds). What do you do, and can you re-download these songs?

Okay, let's say you bought an album and there are a few songs on there where you only have half the song(the song just stops after a number of minutes/seconds). What do you do, and can you re-download these songs?

How to report an issue with Your iTunes Store purchase

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

After a day or two I can no longer conect to a known WiFi network

After a day or two I can no longer connect to a known WiFi network without rebooting the router. The same thing happens with both routers I have (SMC and a Verizon) and when using a shared connection from my MacMini. This happens with each of FOUR iPhones I've owned and my iPod touch. So... yeah. I'm guessing this is either a software issue or some really odd signals are in the are in my area of New Jersey.
Anyone else having similar issues?
Message was edited by: aplardi

have you deleted the account and re-added it? Have you done a reset or restore as outlined in the iPhone user guide? What troubleshooting have you done?

After upgrading to iOS8 my Exchange account has changed to an invalid address. I can change it but after a day or two it changes back to the invalid address. any help on this would be great.

after upgrading to iOS8 my Exchange account has changed to an invalid address. I can change it but after a day or two it changes back to the invalid address. any help on this would be great. Other user on our exchange server that have iOS 7 or lower do not have this problem. All iOS 8 users in our company have this problem

have you deleted the account and re-added it? Have you done a reset or restore as outlined in the iPhone user guide? What troubleshooting have you done?

Long installation of upgrade 9.5.3 to Acrobat Pro: it has not stopped after three days

I have responded to a request to install upgrade 9.5.3 to Acrobat Pro. After three days I still see "Removing applications." How can I stop this?
Thanks

if windows, use task manager (ctrl-alt-del)

Playback stops after a second or two

My playback unexpectedly began to stop after only a second or two today. Fast forward stutters too. No change in the computer (except software updates). The file is OK as it plays fine on my laptop. Trashed preferences, restored Garageband from a previous time machine version, turned off my airport, all to no avail. Garageband is completely unusable on my G5 Tower at this point. Any suggestions or help would be appreciated. Repairing permissions right now to see if it helps.

I had the same issues with playback stopping after a few seconds. It began happening in every project that I had.
I tried a vast number of things, changing mac settings, changing garageband settings, software update of garageband etc etc...
Nothing made any difference until late last night. I decided to make a brand new project with one simple recorded audio track to see if the problem would happen with the new project.
Playback worked fine in my new project and then when I checked my other projects, they all worked fine as well.
I don't know whether initialising a new project fixed things or whether it was a coincidence but the problem went away for me.
Good luck

I lose emails after a day or two

A friend loses her emails on her iPad after a day or so. In SETTINGS the email account is set to "Notify me before deleting" but it still happens.
Who has the answer??
Ed

You should be able to retain your emails...unless your ISP is deleting your messages. You haven't provided any intormation relating to your provider, but check yours for how long they hold onto older messages.

ITunes doesn't play the next song, it just stops after one track.

I have iTunes 11.0.1. When I play a song in my playlist, I expect the next song to start as the first one ends, but iTunes stops and doesn't play the next song. I'm missing some sort of setting but what?
It's not a smart playlist, just a playlist of favorite music I've built up over the years.
Mountain Lion.

Have the tracks become unchecked? iTunes will skip unchecked tracks, so if they're all unchecked, iTunes will play one and then stop. If this is indeed the case, re-checkmark the tracks - Command-click will select or unselect them all - and you should then have continuous playback.
Hope this helps.

HT204053 I was trying to sync my iPhone with my iPad & I caused a working message "Turning Off Safari Data...." I can't get it to stop after a day

I was trying to sync my iPhone & iPad, and caused a working message to appear "Turning Off Safari Data..." It's been on for a day, and I can't make it stop. Please help!

You could use icloud to sync contacts and calendars.
Both the ipad and iphone are intended to sync to a computer.
You can redownload apps from the app store, assuming that they are iphone compatible.
Downloading past purchases from the iTunes Store, App Store, and ...

Internet just stops after 10-15 minutes browsing

We have had this laptop about a year, mainly for work, but the internet browsing is a bit of a pain. After browsing for about 10-15 minutes it takes an age to load pages and then just can't. No matter how long you wait for it to catch up. shutting down and turning on works, restarts don't. Can't seem to get any help from the support line.
We are using Mozilla Firefox, but it also happens on Internet Explorer.

What is the COMPLETE Model Number?
Are you connecting to the internet via the Modem, WiFi, or LAN?
What OS are you using and at what Service Pack Level?
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

TS3276 Mail import just stops after about 180 - 250 Mails! What's wrong?

I just bought a new Macbook and used Migration Assistant to get all my files from my old to my new one.
Now, when I open Mail it tells me that it needs to import my e-mails (which is good, I want it to do that).
I know that all my mails are on my computer, I can see the files in the library.
BUT: The import starts, goes on for a couple of seconds until about 200 Mails (out of 12000) are important and then the number just doesn't go up anymore. Only the remaining time keeps going up and up. What is wrong? What can I do?
Thanks

Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh.

Importing Video just stops after 1-2 minutes

Am using Director's Cut Take 2 to import Video from a VCR. On my old iMac this worked perfectly with iMovie 6. Now have a MacBookPro.
1st problem - the Firewire drive is not powerful enough to drive the Director's Cut! Now need an external Power Supply! Bad design flaw Apple.
Main problem - Video imports fine but after a time (could be anywhere from 30 seconds to 4 minutes but usually about 2 and a half minutes) the video simply stops importing even though the tape is still running. Sometimes it will start up again of it's own accord but more often than not - that's it - it's stopped.
Anyone know why the import simply stops?
The stuff that has imported looks fine!

Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows:*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Garageband-fix. Start it and Close it. Re-try
• Delete iMovie pref file - or rather start a new user/account - log into this and re-try
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08)
• Program miss-match: iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match: iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match: iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Screen must be set to Million-colors
iMovie pref file resides:
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named: com.apple.iMovie.plist
While iMovie is NOT RUNNING - move this file out to desk-top.
Now restart iMovie.
From LKN 1935: (in this case = iMovie HD (5), I tried it all, but nothing worked.
Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
to my Sony camcorders worked properly as it did before.
Yours Bengt W

IMac with 10.6. Firefox opens but does web pages will not load. It just "thinks" indefinately. Can't think what may have caused, just stopped working one day

Safari works fine. Have reset, reinstalled, disabled ad-ons. Am coming up with blanks on the support site.

https://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating
If you are using a third-party firewall, you might want to check that. Other security software can also cause problems with an updated version of Firefox.

CSS11501 VIP just stops after a day or two

Similar Messages

Maybe you are looking for