CSTPACHK package extension: Auto Account Generation in Average Costing

Dear All,
I would like to use the client extension, for the account generation while doing a material transaction.
The costing type of ours is Average.
Currently, when a material transaction is been made from one subinventory to another.
it is showing the source subinventory DFF account for both debit and credit lines in the Material transaction - distributions,
which ideally we need to have the source (Credit) and target (Debit) subinventories material accounts in the DFF of Subinventories
Does anyone have a working example of the CSTPACHK package extension for Auto Account Generation in Average Costing
if any Please update...?
Many thanks in advance...
Edited by: santark on Feb 2, 2010 2:50 PM

Hi,
Can you please advise the steps you did for CSTPACHK extension, we have the requirement (Average costing) where we need to get the different material account id (one segment of the GL account should be overwritten)for the Transaction based on the item for the cost manager to cost the transaction.
Your help is appreciated.
Thanks
Priya

Similar Messages

Auto accounting generation while creating a iexpense report with project

Hi all,
i have a auto account generator setup for a particular employeee... when i change the segment value in auto accounting generator it is not refelcted while creating a iexpense report.
please help me.
Thank you.

Hello,
1. You need to make sure you are entering the 'Project/Task/Expenditure type' information in the Expense Report Line level.
2. If you need to customize the account generator, then you need to change the process 'Default Account Generator for Web Employees' in the workflow 'PAAPWEBX' in the workflow builder.
The project account generator you are modifying is the auto accounting setup which will be used during the cost distribution process to generate an account for the 'Expense Reports' created in Projects.
If you want to customize the account generation for a project related expense report in iexpense then you need to customize the 'Project Expense Report Account Generator (PAAPWEBX)' workflow.
Hope this helps!
Thanks,
Sathish Raju
www.projectsaccounting.com

PA: Revenue Generation Auto Accounting Error

Hello all,
I ran PRC: Generate Draft Revenue for a Single Project report, I got AutoAccounting Error under Draft Revenue Generation Exception Report
I know this is because of Accounting Rules, but i don't know which Auto-Accounting Function Rules that I have to check.
Please guide me to move forward.
Thanks and Regards,
Muthu

Hi,
You can verify "Revenue and Invoice Accounts" Function Name and Unbilled Receivable Account & Unearned Revenue Account based on your Revenue Generation ahead of Invoice generation or vice versa.
Thanks,
SG

Account Generation Extension Workflow

Dear all
i have more than material account in inventory and i used average cost so i used category account
so i want to know how the application don't used the org account and used the category account ??
how i make my category account effect?
how and from where i can make the workflow see the category account not the org account
Essam Essmat

This question may fit perfectly into Oracle Inventory forum rather than Oracle Workflow.

Drivers - Can you do both "Apply Driver Package" and "Auto Apply Device Drivers - PNP" in the same Task Seqeunce ?

Hi All,
It has been mentioned to be that it is possible to have both "Apply Driver Package" and "Auto Apply Device Drivers - PNP' " specified in the same task sequence, with some kind of logic specified that if the Apply Driver Package step does
not run due to the hardware wmi query not being valid then the 'Apply Device Drivers -PNP' will run instead. Vice-versa - if the "Apply Driver Package" wmi query is correct and driver package applied then the 'Auto Apply Device Drivers -PNP'
will not run and be skipped.
Is this possible ?
I can't seem to find any documentation or reference indication this can be done. :-(
Many thanks everyone..

To add some info here, note that the end result of both tasks is the same. Neither actually *installs* drivers in any way. Both simply copy the drivers to the target system and inject them into the image being deployed where they are then available to Windows
Setup (which runs during the Setup Windows and ConfigMgr task) to install based upon the Windows Setup standard PNP detection.
Thus, using both task types, depending upon what is in the driver packages and what is detected by the OSD PNP detection (which differs slightly from the OS PNP which is far more complex and has been described as a "black art"), potentially injects
more drivers into the image potentially making more drivers available to Windows Setup. This could of course increase your deployment time.
I've thought about this approach before and it is technically valid, but I've never had to resort to it. I've always just made sure that the drivers packages are complete. If you're trying to address the scenario of hardware without a explicit driver package,
I could see it working but I could also see it causing problems because drivers are weird. In general, I would recommend always testing new hardware and anything not accounted for is considered unsupported.
Jason | http://blog.configmgrftw.com | @jasonsandys

Receiving Error Message : Cost Of Goods Sold Account Generation Failed

Hi All,
We need some assistance with this issue...for a given item when the Customer RMA order Line is being received into a given organization/sub inventory/locator we are getting this error message in the Receiving Transactions Interface ( RTI ) as mentioned below.
Cost Of Goods Sold Account Generation Failed with error :RVTII-030: Subroutine rvtiicreate() returned error
Cause: Subroutine rvtiicreate() returned an internal error.
We checked for this item in the organization the Cost of Goods Sold Account has been defined in the Costing Tab in the Item-Org Assignment and this GL account is also enabled on the GL side and is Active.
The scenario is like this :
1. Firstly this item is shipped out on an Outbound order line to the customer location and we checked for the valid Sales Order Issue transaction against this item for this order. We checked for its Inventory Distributions as well.. these look to be valid.
It shows : Inventory valuation account is decremented while the Deferred Cogs of Goods Sold account is incremented.
2. Then this item is being entered on Return order line and after booking the order line . It goes to Awaiting Return status. Next the user tries to attempt the Receipt for the Customer RMA order line for this item we are getting the error mentioned below in the RTI tables :
Cost Of Goods Sold Account Generation Failed with error :RVTII-030: Subroutine rvtiicreate() returned error
Cause: Subroutine rvtiicreate() returned an internal error.
Coudl someone please assist us with this issue as this is happening in Production instance ..that would be very helpfull of you..
This is an urgent issue
thanks

Hi,
Standard workflow "OM : Generate Cost of Goods Sold Account" has following steps:
1/ Start generating Code Combination
2/ Get CCID for a line
3/ Copy Values from Code Combination
4/ Validate Code Combination
5/ End generating Code Combination
If I want to modify the segment4, the custom function to set the attribute FND_FLEX_SEGMENT4 need to be inserted just after the step "Copy Values from Code Combination" (NOT just after "Get CCID for a line").
Is it what you have done?
J.

Implementing Auto Contract Generation/Negotiation and Execution

Would love to hear from anyone that has implemented auto contract generation/negotiation and execution. Were there any lessons learned you could share during implementation? Were there things you found out - too late? Are you seeing adoption? How long did the implementation take? Pain points along the road? Things you would do differently? We are getting ready to take this trip ourselves and I have a feeling it will not be smooth sailing.

Hello Sravan
Your message isn't clear fo me
If you used import for new master data you can use automatic key generation ability for inbound port
The another way:
You can create special key field in MDM and
create simple workflow which fire when ADD record.
That worklflow call assignment which fill key field
Regards
Kanstantsin

Account generation workflow custom process not visible in lov

Hi guru,
i have created a sample process in "Project Supplier Invoice Account Generation".
but when i upload the work flow in data base by the concurrent program . i dont find the sample process in " account generation window" in GL.
Please help gurus.
Regards
vishal

Hi,
See the foll notes for solution:
Note 541877 - CUF: Customer fields as checkbox
Note 1016297 - Header customer fields are not displayed in bbpsc02
Note 1034079 - Customer fields not visible in shopping wizard
BR,
Disha.
Pls reward points for useful answers.

Business partner auto code generation

hi how to create business partner auto code generation. its based on customer group for example we have more customer group..dealer, distributor,subcontractor...
here dealer and distributor group starting cardcode is - C000001,C000002,C000003..... etc
when i was choose subcontractor its starts SUB00001,SUB00002...... etc
vendor is maintain same starting letter in all groups V000001,V000002
Thanks in advance
Thanks & Regards
B.Lakshmi Narayanan

hi thanks for your valuable replies...
i changed the codes...pls check its right or wrong
declare @temp as char(20)
IF $[OCRD.GroupCode] = 104 and $[OCRD.cardtype] = 'c'
BEGIN
set @temp=(select isnull(max(right(cardCode,7)),0) + 1 from Ocrd where (groupcode= 104) and (len(cardCode)=7))
set @temp='TRA'isnull(replicate(0,7-len(@temp)),'')@temp
select cast(@temp as char(20))
END
ELSE IF $[OCRD.cardtype] = 'C'
BEGIN
set @temp=(select isnull(max(right(cardCode,7)),0) + 1 from Ocrd where (len(cardCode)=7))
set @temp='C'isnull(replicate(0,7-len(@temp)),'')@temp
select cast(@temp as char(20))
END
ELSE IF $[OCRD.cardtype] = 'S'
BEGIN
set @temp=(select isnull(max(right(cardCode,7)),0) + 1 from Ocrd where (len(cardCode)=7))
set @temp='S'isnull(replicate(0,7-len(@temp)),'')@temp
select cast(@temp as char(20))
END
Thanks & Regards
B.Lakshmi Narayanan

Auto accounting for deferred expenses

Hi all
I would like to know if there is a functionality in Oracle to perform auto accounting for Deferred Expenses. I'm giving below an example of my exact requirement for my professional colleagues to reply.
Scenario:
The school fee for an employee's kid is paid on 1 Jan 2012 for the school year 1 June 2012 to 31 May 2013. I would like to account for the payment now as on 1 Jan 2012 showing this as Deferred Expenses and the monthly auto accounting/booking needs to start from 1 June 2012 to finish on 31 May 2013.
Is there any functionality available which will help me do this without any monthly manual intervention.
Regards
Anand
+971 4 3086738

If you are using R 12.1.1 or higher versions you can use multiperiod accounting.
Further I am assuming that you want to account for school fees from oracle payables.
Thanks,
Sid

Auto-Accounting Functions And Function Transaction scenarios

Hello Experts,
Do somebody have the complete information about the the list of Auto-accounting functions triggered @ time of events or functions like costing, revenu , billing etc?
Example - Expense Report Cost Account is fired when you run PRC:Distribute expense report cost ? sure ?? or when entered i-Expense? It will be gr8 to have some detail understanding on Auto-Accounting fucntions and their cause of origin.
Provider Cost Reclass Credit Account / Provider Cost Reclass Debit Account - Origin??
Thanks

Hello Experts,
Do somebody have the complete information about the the list of Auto-accounting functions triggered @ time of events or functions like costing, revenu , billing etc?
Example - Expense Report Cost Account is fired when you run PRC:Distribute expense report cost ? sure ?? or when entered i-Expense? It will be gr8 to have some detail understanding on Auto-Accounting fucntions and their cause of origin.
Provider Cost Reclass Credit Account / Provider Cost Reclass Debit Account - Origin??
Thanks

LMS Content Packager Extensions Question

Does anyone have experience with the three content packager
extensions for Learning Management Systems (LMS') and are you aware
of which SCORM edition these packagers were written for? I have
found incompatabilities between The Content Packager for IMS and
the SCORM 2004 3rd Edition Testing Suite. I have not been
successful in creating a package that will pass based on this
Extension.
I found three packagers listed - and all of them seem to be
three years old or older.
Content Packager for IMS for
Dreamweaver 8
Content Packager for IMS for Dreamweaver MX 2004
The Content Packager for IMS
Any ideas?

I believe "Content Packager for IMS" (aka "L5 SCORM
Producer") extensions are stuck back in SCORM 1.2. They only
package the IMS Manifest and the wrappers (if you choose to use
them). I could be wrong, but I think if they are to pass SCORM 2004
conformance tests, they require the XSD and DTD files as
well.

System offline - coincided with removing TV package from my account

On 7/17 I removed the TV package from my account, as you may have guessed from the post title. It took a few days, but I noticed that the home monitoring and control was no longer sending notifications. When I tried to log into the app, it told me "you do not have home monitoring and control" - same with the web portal designed to manage this service.
My first call to tech support went something like this:
"Are you sure that no one accidentally turned this off on my 7/17 call?"
"There is absolutely no way that could have happened."
Voice mail from Verizon, later:
"Someone accidentally turned this off. It should work now."
My next call, after the system still did not work, resulted in the agent asking me to do a reset of the gateway device, and to wait 30 minutes - call back if it's not working. Guess what, that didn't work - nice that the agent got off the call so quickly.
After several additional calls, it is not working. I now have an open and "escalated" support ticket, essentially useless equipment, and no faith whether the service is actually enabled in all the right places on Verizon's side.
Solved!
Go to Solution.

Well, good luck, you will need it. When something like that happens they normally have to rebuild your whole account. And since they don't sell HM&C anymore, they may not beable to setup a new account with that option. :-(
My suggestion is to ride the hard. Call several times a day if you have to and get a superviser's name, deal only with that person and demand a daily update. Here's the direct number in case you don't already have it: 866-785-8153
If they can't get you working again and you want to sell your equipment, let me know.
Oh, and first rule of tech-support, don't let the tech off the phone until the problem is resolved or they have to send you to the next level support.

Project Supplier Invoice Account Generation from Sub Ledger Accounting rule

Hi gurus,
we are implementing project module with the financial.
We need to customise the Project Supplier Invoice Account Generation.
We are preferring the Sub Ledger Accounting generation rule in place of the workflow method(where we need to customize the default workflow for account generation from AP to PA).
We have done the setup for the SLA to generate accounting (from AP invoices TO pa). But still we are getting the same error("the system cannot generate distributions for line 1 because payable account function Project supplier invoice charge account has not been customized. please replace the dummy function in default account generation process"
Please help me.. to solve the problem..
As Its a very urgent customization on the verge of going live..
thnkz in advance
Regards
Vishal

Hi
Customizing the Payables and Purchasing Account Generator for project related documents is mandatory. The accounting rules in SLA is optional.
Since you said you are pleased with the set up of the accounting rules by SLA, you might set up a very simplistic account generator rule, so it will generate a constant account. SLA will later on override the constant by the real rules.
Dina

Deleting segment rule pairings of Auto accounting in Oracle Projects.

Hi,
We are unable to delete the segment rule pairings which are assigned to a function transaction in auto accounting setup in our client instance. But the same can be deleted in Vision instance. Is there a setup to enable the delete option?
Thanks,
Roshan.

Hi Roshan,
You should remove the Rule assignment from Segment rule pairing which you want to delete from all the functions before deleting the same.
With Regards,
Byju

CSTPACHK package extension: Auto Account Generation in Average Costing

Similar Messages

Maybe you are looking for