Ctbw data source not found in source system

hi,
by reading and posting couple of threads i was finally able to create a data source in ctbw
0MATERIAL_ATTR 800 001 MARA ATTR 1CL_OMAT002
so i went to rsa3 and tried to test this data source 1CL_OMAT002
i am getting error in this way
<b>DataSource 1CL_OMAT002 is not defined in the source system</b>
can anyone suggest me how to proceed further
and also if the above problem is resolved what should i do in bw side
should i replicate 0MATERIAL_ATTR or 1CL_OMAT002 or both?

Hi,
Have you generated the data source after creation.
in CTBW you will have to click on "generate data source" after you have created and saved the data source.It will activate all the classes used in that data sources.
Once done go to RSO2 and give your data source name there and see if this data source appears there with it's field or not...if not then your data source is not getting generated properly.
Try this and once successful then go to RSA3 and try to extarct data.
Thanks

Similar Messages

Crm data source 0BP_RELATIONS_46BC_ATTR not found in BI system

Hi all,
i have a data source ( 0BP_RELATIONS_46BC_ATTR ) in source system ( crm ) i have activated it and found more 5000 records in source system but it not found in BI system ,i tyied to install from BI CONTENT but there also i cant able to find it , can any one help me where to install the data source
0BP_RELATIONS_46BC_ATTR which i can't find in Bi content
Regards,
shahina....!

Hi,
first of all be patient. We all have our own issues.
Back to your issue:
Did you replicate the datasource? If not, do so and it will be available in BW. Assign it to a infosource or a datatarget to be able to load data.
Siggi

Build unsuccessfull product not found on the system or has been upgraded: daqmx 8.7

I get the following error when doing a build:
The build was unsuccessful.
The following product(s) are not found on the system or have been upgraded:
NI-DAQmx 8.7
I just upgraded from LabView 8.6 to 8.61.
Any ideas?

Hi Friend
You haven't mentioned whether it is occurring while building exe or installer. And I hope this occurring when building a installer. You just try this
Go to installer properties under category select "additional installers" and uncheck all items under the "national instruments installers to include" and then build. If its builds successfully there is no problem in your exe.
You can make separate installer of corresponding Run time engine and Device Drivers from the labview DVD.
This problem may happens when the installer failed to find the path of labview source distribution DVD where the Run time engine and device drivers are located.
Regards
Sam
[email protected]

Error "Bridge CS6 was not found on this system. To use this command, please reinstall Bridge CS6"

Hi all,
We are having issues with Adobe Bridge working properly with Photoshop. When trying to access Bridge through Photoshop we receive the following error "Bridge CS6 was not found on this system. To use this command, please reinstall Bridge CS6"
- We have the Master Collection CS6 installed
- Bridge CS6 is working fine as a stand-alone program
- This is installed on Windows 7 x64
- I am unable to find an uninstall location for Bridge CS6, it is not under control panel > Adobe Master Suite
- All adobe products are up-to-date as of this morning.
Any help would be appreciated.
Thanks,
Message title was edited by: Brett N

Bacterin1 wrote:
It has not worked previously.
Does not make a difference is bridge is open or not.
Yes, we are accessing it through File/browse in bridge.
OK, back to square 1.
Does Bridge work normally? Does it load Bridge CS6 or does CS5 come up? Only one version can run at same time.
If you double click on an image it opens in CS6?

Error while running February 2014 CU for SharePoint 2010 Foundation: The expected version of the product was not found on the system

I ran SP2 and SP2 for Language Pack successfully before.
Here is how it looks:
Product
Version
Status
Language Pack for SharePoint Foundation 2010 - Portuguese/Português (Brasil)
Installed
Microsoft SharePoint Foundation 2010 1046 Lang Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010 1046 Lang Pack Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Language Pack for SharePoint, Project Server and Office Web Apps 2010 - Portuguese/Português (Brasil)
Installed
Microsoft Access Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Document Lifecycle Components Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Hotfix for Microsoft Office Server (KB2512800)
14.0.5138.5000
Installed
Microsoft Excel Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Excel Web App Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft InfoPath Form Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (Portuguese (Brazil)) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Web Apps Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Web Apps Proof (Portuguese (Brazil)) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Web Apps Shared Coms Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft OMUI Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Project Server Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Search Server 2010 Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Hotfix for Microsoft Office Server (KB2475878)
14.0.5135.5000
Installed
Microsoft Shared Coms Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010 1046 Lang Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Portal Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Slide Library Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Visio Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Web Analytics Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Word Server Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft XMUI Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
PerformancePoint Services in SharePoint 1046 Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010
Installed
Microsoft SharePoint Foundation 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010 1033 Lang Pack
14.0.4763.1000
Installed
Hotfix for Microsoft SharePoint Foundation 2010 (KB2512804)
14.0.5138.5000
Installed
Microsoft SharePoint Foundation 2010 Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft® Search Server 2010 Express
Installed
Microsoft Office Server Proof (Arabic) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (English) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (French) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (German) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (Russian) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (Spanish) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Search Server 2010 Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Search Server 2010 English Language Pack
14.0.4763.1000
Installed
Hotfix for Microsoft Office Server (KB2475878)
14.0.5135.5000
Installed
Microsoft Search Server 2010 Express
14.0.4763.1000
Installed
Microsoft Shared Components
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Shared Coms English Language Pack
14.0.4763.1000
Installed
Microsoft SharePoint Foundation 2010 1033 Lang Pack
14.0.4763.1000
Installed
Hotfix for Microsoft SharePoint Foundation 2010 (KB2512804)
14.0.5138.5000
Installed
Microsoft SharePoint Foundation 2010 Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Web Analytics English Language Pack
14.0.4763.1000
Installed
Microsoft Web Analytics Web Front End Components
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
However when I try to run February CU or December CU I get the error:
The expected version of the product was not found on the system
it's possible that I messed up because
I think I installed a SharePoint Server Service Pack 2 in a SharePoint Foundation Farm.
these are the files I ran:
1 - SP2 pt-br
oserversp2010-kb2687453-fullfile-x64-pt-br
2 - SP2 for Language Pack pt-br:
oslpksp2010-kb2687462-fullfile-x64-pt-br
3 - ran configuration wizard (had na error message the first time and success in the second try)
4 - December CU or February CU:
Download SharePoint Foundation 2010 February 2014 CU
The expected version of the product was not found on the system
In the first step I think I should have installed
wsssp2010-kb2687464-fullfile-x64-pt-br
Now I try to runthis and I get:
The update is already installed on the system.
Hopefully this is a QA Environment but it would be a pain to start over.
Any suggestion?
Thanks
J.Clua

Hi,
Here are all errors logged:
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [81606c80-44b3-47c9-8c24-136bdeb07d64]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id 81606c80-44b3-47c9-8c24-136bdeb07d64 is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [4b6e8a49-765d-47a1-92f8-91f61d07bbed]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id 4b6e8a49-765d-47a1-92f8-91f61d07bbed is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [af6d9aec-7c38-4dda-997f-cc1ddbb87c92]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id af6d9aec-7c38-4dda-997f-cc1ddbb87c92 is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [00bfea71-dbd7-4f72-b8cb-da7ac0440130]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id 00bfea71-dbd7-4f72-b8cb-da7ac0440130 is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:16:17 PM]: Found a missing feature Id = [5daabc0d-5714-4b95-9238-95d58704bc11], Name = [Blog Rating], Description = [This feature allows visitors
to rate blog posts], Install Location = [Blog Rating]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:16:17 PM]: The feature with Id 5daabc0d-5714-4b95-9238-95d58704bc11 is referenced in the database [WSS_Content_AcademiaTI], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:23:56 PM]: Found a missing feature Id = [af6d9aec-7c38-4dda-997f-cc1ddbb87c92]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:23:56 PM]: The feature with Id af6d9aec-7c38-4dda-997f-cc1ddbb87c92 is referenced in the database [WSS_Content_GlobalIT], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [DEBUG] [3/11/2014 5:25:49 PM]: Retrieving site definition for language 1046...
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: Found 21 web(s) using missing web template 75801 (lcid: 1046) in ContentDatabase WSS_Content_EXP.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: The site definitions with Id 75801 is referenced in the database [WSS_Content_EXP], but is not installed on the current farm. The
missing site definition may cause upgrade to fail. Please install any solution which contains the site definition and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: Found 1 web(s) using missing web template 75802 (lcid: 1033) in ContentDatabase WSS_Content_EXP.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: The site definitions with Id 75802 is referenced in the database [WSS_Content_EXP], but is not installed on the current farm. The
missing site definition may cause upgrade to fail. Please install any solution which contains the site definition and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id = [75a0fea7-2d1e-451a-b445-16bc346d7d8e]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: The feature with Id 75a0fea7-2d1e-451a-b445-16bc346d7d8e is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id = [75a0fea7-5f69-4282-83ae-22808c0fbfd9]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: The feature with Id 75a0fea7-5f69-4282-83ae-22808c0fbfd9 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id = [75a0fea7-6e3f-4d4a-8f78-245bda567b60]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-6e3f-4d4a-8f78-245bda567b60 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-040e-4abb-b94b-32f1e7572840]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-040e-4abb-b94b-32f1e7572840 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-b5a0-47d5-90e6-4b3205b02278]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-b5a0-47d5-90e6-4b3205b02278 is referenced in the database [[OWSTIMER] [SPContentDatabaseSequence] [ERROR]
[3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-b5a0-47d5-90e6-4b3205b02278]], but is not installed on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature
and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [f7b9c169-1418-41f3-888f-8ac436e17a0a]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id f7b9c169-1418-41f3-888f-8ac436e17a0a is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-f13a-4670-8b69-97e90d05f7c8]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-f13a-4670-8b69-97e90d05f7c8 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-377d-4b4f-b864-984379ed0f42]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-377d-4b4f-b864-984379ed0f42 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-9d96-4f02-a800-a3512154efcd]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-9d96-4f02-a800-a3512154efcd is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [90cd055f-f21f-42c5-b3fe-bb67173583d4]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 90cd055f-f21f-42c5-b3fe-bb67173583d4 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-0017-4993-85fe-c37971507bbc]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-0017-4993-85fe-c37971507bbc is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-fe65-41c3-a965-c5df83fb098b]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-fe65-41c3-a965-c5df83fb098b is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-7c51-4a75-92c1-cbaccb371622]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-7c51-4a75-92c1-cbaccb371622 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-b0ef-434e-90d6-ce997d970564]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-b0ef-434e-90d6-ce997d970564 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-37d2-484b-b362-dcff1538e2a4]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-37d2-484b-b362-dcff1538e2a4 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [49c44827-4747-4e89-999c-f199ad95cfa8]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id 49c44827-4747-4e89-999c-f199ad95cfa8 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: Found a missing feature Id = [75a0fea7-42e8-4527-8313-f63c4c49a7e6]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id 75a0fea7-42e8-4527-8313-f63c4c49a7e6 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: Found a missing feature Id = [75a0fea7-a4ce-4a83-867d-f6be0ffdd867]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id 75a0fea7-a4ce-4a83-867d-f6be0ffdd867 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]: Action 4.0.23.0 of Microsoft.SharePoint.Upgrade.SPSiteWssSequence failed.
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]: Inner Exception: Já existe um campo com este nome.
O nome especificado para este campo é igual ao de outro campo da lista. Escolha outro nome e tente novamente.<nativehr>0x81020013</nativehr><nativestack></nativestack>
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateField(String bstrUrl, String bstrListName, String bstrXML)
   at Microsoft.SharePoint.Library.SPRequest.UpdateField(String bstrUrl, String bstrListName, String bstrXML)
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]: Exception: Já existe um campo com este nome.
O nome especificado para este campo é igual ao de outro campo da lista. Escolha outro nome e tente novamente.
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]: Upgrade [SPSite Url=http://sjkqa41:7779] failed. Microsoft.SharePoint.Upgrade.SPSiteWssSequence has the ContinueOnFailiure bit set. Moving
on to the next object in sequence.
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]: Inner Exception: Já existe um campo com este nome.
O nome especificado para este campo é igual ao de outro campo da lista. Escolha outro nome e tente novamente.
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
   at Microsoft.SharePoint.Library.SPRequest.UpdateField(String bstrUrl, String bstrListName, String bstrXML)
   at Microsoft.SharePoint.SPField.UpdateCore(Boolean bToggleSealed)
   at Microsoft.SharePoint.SPFieldIndexCollection.IndexOneField(Object field, Boolean bIndexed)
   at Microsoft.SharePoint.SPFieldIndexCollection.Add(SPField field)
   at Microsoft.SharePoint.Upgrade.RestoreWorkflowAndDatasourceLibraryPermissions.Upgrade()
   at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]: Exception: Action 4.0.23.0 of Microsoft.SharePoint.Upgrade.SPSiteWssSequence failed.
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:37:44 PM]: Upgrade Timer job is exiting due to exception: Microsoft.SharePoint.Upgrade.SPUpgradeException: Upgrade completed with errors.
Review the upgrade log file located in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\Upgrade-20140311-164603-307.log.
The number of errors and warnings is listed at the end of the upgrade log file.
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.CheckPoint()
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.LogEnd()
   at Microsoft.SharePoint.Administration.SPUpgradeJobDefinition.Execute(Guid targetInstanceId)
Despite all the erros, can I consider these farm updated in terms of SharePoint build?
Thanks
J.Clua

"Font not found on the system" for work logo font

I just started a new job and every single AI file I work with in illustrator is using VTypewriterRoyal - the company logo.
It automatically defaults to Myriad with the msg:
"Font not found on the system; missing font has been substituted."
I've spent way too much time changing it back from Myriad once in AI + scouring the web for answers. Haven't come up with any.
No one else at work seems to have this problem. I've tried installing and uninstalling the font.
Redownloading as OTF instead of TTF.
Nothing is working, so I really really hope someone can help me since I'm going to be considered slow if I keep having to take the time to change every ******* file I open.
Adobe support is seemingly overly complicated and this issue is making me crazy!!!
Someone please help. I'm on a brand new iMac 27" using 10.6.8....
Thanks.

check your spelling/spacing
I see
VTypewriter Royal
and
VTypewriterRoyal
They are different names...one has a space, the other does not
They must match exactly to work correctly

The ovmcore-console libraries were not found on the system!!

Hi all,
I need help to open serial console from Oracle VM Manager GUI.
I'm using the beta version 3.3 of Oracle VM Manager and the agent with Oracle VM Server 3.1 installed on a SPARC Enterprise T5240.
I created a virtual machine with the manager, but when i try to launch serial console i have the following message:
"Error 404: Page not found.
The ovmcore-console libraries were not found on the system.
Please install the correct ovmcore-console rpm suitable for your system on the Manager server.
See the Oracle VM Installation Guide for additional information."
any help ?

Thank you for testing Oracle VM Manager 3.3 beta.
We are still reviewing ovmcore-console package and have not made it public yet. Meanwhile, please use the following workaround to access the VM console:
You can redirect the remote port to local using the ssh(1) command.
1) From Oracle VM Manager UI, find out the UUID of the virtual machine. For example: 0004fb0000060000e98127266687b615.
2) Log into Oracle VM server (dom0), use xm list command to get the domain id. In this example, the domain id is 2. The VNC port number will be 59xx, starting with 5900.
# xm list -l 2 |grep 59
(location 127.0.0.1:5900)
3) From your own desktop, then you can execute the command in a local shell to redirect the port to your desktop:
$ ssh -L 12345:localhost:5900 -N -f root@OVS
4) The "5900" port will be redirected to "12345" of your local desktop, so that you can run the following command to connect the guest console:
$ vncviewer local:12345
5) For Windows, you can set up an ssh tunnel by using PuTTY for example.

Could not automatically scale X because monitoring data was not found

I have never been able to get Auto-Scaling by CPU to work. I have created new cloud services, waited days before setting it up, but this warning always gets generated when it tries to scale:
Could not automatically scale XXX because monitoring data was not found
The cpu data displays on the monitoring tab and the auto scale configuration screen.

Hi wikek,
Thanks for your posting!
Is your question similar with this post(http://stackoverflow.com/q/19730570 )? I am not sure but it is possible that the cloud service and VM has had maintainence on yesterday, please see this comment form
Azure dashboard (http://azure.microsoft.com/en-us/status/#history ):
Starting at 2nd Sep, 22:18 PM UTC to 3rd Sep, 03:45 AM UTC, a very limited subset of customers using Cloud Services and Virtual Machines in West US may have experienced intermittent errors or timeouts when attempting to access services. The issue was
intermittent, and customers would likely have been successful when retrying a request. Engineers have validated that full service availability has been restored to our West US customers. This incident is now mitigated.
It could leverage the VM or Cloud service performances. And I suggest you can contact with azure support to resolve this issue.
http://www.windowsazure.com/en-us/support/contact/
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

EP5: Access Data Source (System Conf) properties

Hi ,
I am using EP5.0.In my portal , I have a tab called "System Configuration" and in that I have a sub tab called "DataSources" . I am putting in details such as URL , Username argument (say UName ) (not the username itself) and the password argument (say Pwd) (not the password - the argument like PWD ). these arguments are like -
used in the URL to check like UName = '..' and Pwd ='...' and these arguments may be different for differnet datasources... I want to get these details in the iview program ...
like
for datasource
'sdn'--- username argument = UName
password argument = Pwd
'sap'--- username argument = UserName
--- password argument = Pass
I want these details in the program ......
I should be able to pass the data source name and then it should give me these details ...so that i can use these arguments in my user mapping for other users...
what api should i use? what should i use....
please reply as soon as possbile...
avinash...

Hi all ,
Can anyone help me out with the above mentioned problem please ? Its urgent....
Thank you,
Avi

Recover Child Data Source - System Center Data Protection Manager 2012 SP1

I'm trying to write a script that, given an input file, recovers data from 1st of the month redirected to a folder.
It's all working, but I need to be able to restore only a folder from a D: drive that is protected for instance.
how can I restore a folder and it's contents from powershell? I can restore and redirect a whole drive for the recovery point I want, but I can't figure out how to restore a childdatasource. I've identified the cds, but how can I make that a recoverableitem
to feed the recover cmdlet?
Mark

Child data source isn't the way to do this, I should have checked each recoverable item in the recovery point, that would like the top level items such as top level folders/vm's/sql dbs, etc.
Mark

Microsoft ODBC data manager not found

I created a Universe using Information Design Tool and published it to the repository. My data source was MS SQL server 2008. At this point I am able to view the result values in query in IDT.
Now when I try to preview the query in SAP Dashboard Design, I am getting the below error while using Query Builder in SAP Bo XI4 Dashboard designer.
Request processing failed. (XLS 000009)
Request processing failed. (XLS 000009) []<com.businessobjects.dsl.commons.exception.NestedException: [Microsoft][ODBC Driver Manager]Data source name not found and no default driver specified&gt
My Specifications are :
MS SQL Server 2008 in 64 bit OS
BO 4.0
I tried creating system DSN in odbcad32.exe in the PC but it didn't work. I still get the error.
Any suggestion on how to resolve it.

Forget the Federation server. You need the Connection Servers up.
This is a DSN problem.
For this 1 SQL server connection, you need BOTH 32-bit and 64-bit DSN defined on the BI Processing Server, with the same name.
Good info here: https://websmp204.sap-ag.de/~sapidb/011000358700000018202011E/index.htm
Regards,
H
p.s. lots of notes about this :
1495318 - Error: Data source name not found and no default driver specified
1543358 - Error: "A database error text is [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified.
1396736 - " : [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified" error when testing connection in Universe Designer on 64-bit Windows OS

/SAPAPO/SYSDIR - Entry not found for Logical System

Hi Guys...
I have upgraded a new SCM 5.0 box from a database copy of APO Production. Ran the BDLS to convert the logical system pointing to Quality box. The challenge I am facing is to define a Distribution Definition in SPRO for Planned Independent Requirements. One of the values required in the Publication Definition is 'Logical System'. I need to point this APO Quality system to R/3 Quality system.
Since this happened to be an upgrade from an APO production database, this does not have the R/3 Quality system in the list of Logical Systems when I do the drop down. All it has is the logical system name of the APO Quality System (Self) and R/3 Production System.
When I create a new entry by manually entering the logical system name of R/3 Quality System, it says no entry found in /SAPAPO/SYSDIR. My question is, how do I populate this directory with the logical system name of R/3 Quality system? Your answer at the earliest will be highly appreciated with correct points.
Thank you.

Location in APO is nothing bu the Plant Master Data ( Or Vendor Master, Customer etc)
Goto Transaction- /sapapo/loc3 to view both the plants JNa and JWA
I think that you would have to define the integration mdoels which define what data( MASTER and TRNSACTIONAL) has to flow from R3 and APO and vice versa.
Contact your APO Functional Team to set these up for the new logical system(SCM Quality) in the transactions- CFM1 and CFM2 and define the data which has to flow between the systems ( R3 and APO)
For your 2 locations:
Follow these steps in the meanwhile with the help of APO Functional Guy
(1) Define the CONNECTIVITY steps which I have mentioned in the previous reply in R3 Quality
(2)Goto transaction- CFM1
Enter a model name- LOC( Any Name)
Enter a logical system- SCM Quality
APO Application- Lo(Any NAme)
Select PLants check box and
IN the right hand side- General selection options input the 2 locations- JNA and JWA in the Plant Field
Save this and execute and then save it.
(3) Goto CFM2 and automatically you should see the same model as you deifned in CFM1.
Execute this.
The above steps make sure that the Location( Or PLant) master data is sent over to APO Quality.
Now the source system should have been changed on the location masters in APO.
Hopefully this should resolve the issue and you will be able to enter a publication type for your locations- JNA and JNW
There are many other steps which you need to do apart from these for your entire setup.
Good Luck with this problem
Regards
Kumar

Korean data is not displaying in BI system

Hello BI Experts,
Do you have any idea or some settings in BI system as korean data is not displaying in BI ODS, while source system in correct data. Korean data is displaying # value in PSA and ODS.
Thanks,
Sapna

hi,
as mentioned in earlier post ,you need to have your system unicode enabled,
check in menu -> system->status...in your BW system field called unicode system
Also try running program program RSCPINST - which is used to set the language setting to load the data.
if the chain language setting is not maintianed for loading :
click on Add button ->Key :KO and Language :korean->save it
try to load the data again and check it
hope it helps
regards
laksh

"Data network not found" message

I've had my phone for about 3 weeks now. Yesterday, I'm on the road and the phone will not pick up a data network signal. I figured it was just a bad area, but then I roamed all over Boston and could not pick up a data signal even though the bars were full. Went out of town and same problem. Later, I realized that I couldn't make or receive calls either. Finally, I turned off the phone then turned it back on, which fixed the phone call issue (and all these messages came up), but then I tried using Safari and the message came up again. What's more, once that message came up I couldn't make calls anymore either until I restarted the phone! Now I'm back in my apartment and it's as if nothing happened. What gives? I saw a post about resetting the network. Does this happen often to other people?

    Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
        Message:
                The network path was not found.
        Data:
          WatsonData = [email protected]rror
Above message says that your registry is not consistent and some of the parameters are missing from registry.Or
Account installing SQL server does not have permission to access this. I think case can be here that account with which you logged into your system to install SQL Server might not have certain privileges. Can you take help
of domain admin account add it as a local administrator in this machine always right click on setup file and select run as administrator. Before this make sure you remove all SQL Server components from add remove program
I strongly recommend you to have a good look at below thread
http://support.microsoft.com/kb/2000257/en-us
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Problem while importing data schema not found

Hi,
I'm facing problem while importing data through system to a schema and impdp gives me error that schema XYZ was not found but when I query dba_users schema exist there what could be the reason of this.
Regards,
Abbasi

Hi,
Here is complete listing
bash-3.2$ impdp system/abc schemas=XYZ DIRECTORY=data_dir DUMPFILE=Today_dump.dmp LOGFILE=Today_log.log PARALLEL=8
Import: Release 11.1.0.7.0 - 64bit Production on Friday, 07 January, 2011 11:18:57
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39002: invalid operation
ORA-39165: Schema XYZ was not found.
Regards,
Abbasi

Ctbw data source not found in source system

Similar Messages

Maybe you are looking for