CTBW_META tcode in SAP BI 7.0 version

I have about 1300 Characteristics for which I need to create three different for each class type (001, 200, 300) in ECC. Creating extractor in ECC with CTBW is working good.
I have a question regarding creating 1300 Infoobjects in BI 7.0, whether CTBW_META tcode works in only SAP BW 3.x version not in SAP BI 7.0..?
Since I need 1300 infoobjects in BI, creating them manually will take lot of time.
So my question is whether CTBW_META works in SAP BW 3.5 version only but not in SAP BI 7.0 or I can create 3.5 datasources in SAP BI 7.0
Thanks

Hi,
It will work Please check this thread for more details:
Implementing Variant Config (VC) as a characteristic in BW 3.5
~AK

Similar Messages

List of Tcodes in SAP

Hi Gurus,
Send me a list of Tcodes in SAP.
Thanks in Advance,
Sakthi

Plant Maintenance (PM)
Stephan Nilsson was kind enough to share some PM transactions. Stephan Nilsson was kind enough to share some PM transactions.
IW31     Create Plant Maintenance Order
IW32     Change Plant Maintenance Order
IW33     Display Plant Maintenance Order
IW34     Create Notification Order
IW51     Create Service Notification
IW52     Change Service Notification
IW53     Display Service Notification
IW54     Create Service Notification :Problem notification
IW55     Create Service Notification :Activity Request
IW56     Create Service Notification :Service Request
IW57     Assign deletion Flag to Completed Service Notifications
IW58     Change Service Notifications: Selection of Notification
IW59     Display Service Notifications: Selection of Notification
Production Planning
Tymon Kerste has provided me with these PP tcodes. Tymon Kerste has provided me with these PP tcodes.
C001     Create Production Order
C005N     Collective Release
C011N     Time Ticket
C012     Confirmation - Collective
C013     Confirmation - Cancel
C00IS     Production order information system
C0GI     Reprocess Goods Movements
C223     Maintain production version
General Notes
You can execute the following commands in the transaction code (tcode) field with Enter. You will find some useful transaction codes below to work in tandem with the following commands:
To call a transaction - In the same session (window) Enter: /nxxxx (xxxx = transaction code). - In an additional session, Enter: /oxxxx (xxxx = transaction code).
If you enter this function before any of the tcodes below, you are able to break out of your current screen/business and begin a completely new session. Otherwise, the current business process has to be terminated, and return to the initial user screen (the main menu) has to be initiated before entering tcode spro). /o tcode saves you the effort of having to do this.
To end the current transaction Enter: /n. Caution: Unsaved changes are lost without warning
To delete the current session. Enter: /i.
To generate a session list Enter: /o.
To log off from the system Enter: /nend.
From John O'Meara
OSS Note 0026171 has additional information on OKCodes in SAP, and is a very useful read
BASIS/ABAP
USMM     Pressing F8 will display all hotpacks applied.
SEARCH_SAP_MENU     Show the menu path to use to execute a given tcode. You can search by transaction code or menu text.
DI02     ABAP/4 Repository Information System: Tables.
LSMW     Legacy System Migration Workbench. An addon available from SAP that can make data converstion a lot easier. Thanks to Serge Desland for this one.
OSS1     SAP Online Service System
OY19     Compare Tables
SM13     Update monitor. Will show update tasks status. Very useful to determine why an update failed.
S001     ABAP Development Workbench
S001     ABAP/4 Development Weorkbench. (from [email protected])
S002     System Administration. (from [email protected])
SA38     Execute a program. (from [email protected])
SCAT     Computer Aided Test Tool
SCU0     Compare Tables
SE01     Old Transport & Corrections screen
SE03     Groups together most of the tools that you need for doing transports. In total, more than 20 tools can be reached from this one transaction.
SE09     Workbench Organizer
SE10     New Transport & Correction screen
SE11     ABAP/4 Dictionary Maintenance SE12 ABAP/4 Dictionary Display SE13 Maintain Technical Settings (Tables)
SE12     Dictionary: Initial Screen - enter object name. (from [email protected])
SE13     Access tables in ABAP/4 Dictionary. (from [email protected])
SE14     Utilities for Dictionary Tables
SE15     ABAP/4 Repository Information System
SE16     Data Browser: Initial Screen. (from [email protected])
SE16N     Table Browser (the N stands for New, it replaces SE16). Provided by Smijo Mathew.
SE17     General Table Display
SE24     Class Builder
SE30     ABAP/4 Runtime Analysis
SE32     ABAP/4 Text Element Maintenance
SE35     ABAP/4 Dialog Modules
SE36     ABAP/4: Logical Databases
SE37     ABAP/4 Function Modules
SE38     ABAP Editor
SE39     Splitscreen Editor: Program Compare
SE41     Menu Painter
SE43     Maintain Area Menu
SE48     Show program call hierarchy. Very useful to see the overall structure of a program. Thanks to Isabelle Arickx for this tcode.
SE49     Table manipulation. Show what tables are behind a transaction code. Thanks to Isabelle Arickx for this tcode.
SE51     Screen Painter: Initial Screen. (from [email protected])
SE54     Generate View Maintenance Module
SE61     R/3 Documentation
SE62     Industry utilities
SE63     Translation
SE64     Terminology
SE65     R/3 document. short text statistics SE66 R/3 Documentation Statistics (Test!)
SE68     Translation Administration
SE71     SAPscript layout set
SE71     SAPScript Layouts Create/Change
SE72     SAPscript styles
SE73     SAPscript font maintenance (revised)
SE74     SAPscript format conversion
SE75     SAPscript Settings
SE76     SAPscript Translation Layout Sets
SE77     SAPscript Translation Styles
SE80     ABAP/4 Development Workbench
SE81     SAP Application Hierarchy
SE82     Customer Application Hierarchy
SE83     Reuse Library. Provided by Smiho Mathew.
SE84     ABAP/4 Repository Information System
SE85     ABAP/4 Dictionary Information System
SE86     ABAP/4 Repository Information System
SE87     Data Modeler Information System
SE88     Development Coordination Info System
SE91     Maintain Messages
SE92     Maintain system log messages
SE93     Maintain Transaction. (from [email protected])
SEARCH_SAP_MENU     From the SAP Easy Access screen, type it in the command field and you will be able to search the standard SAP menu for transaction codes / keywords. It will return the nodes to follow for you.
SEU     Object Browser
SHD0     Transaction variant maintenance
SM04     Overview of Users (cancel/delete sessions)
SM12     Lock table entries (unlock locked tables)
SM21     View the system log, very useful when you get a short dump. Provides much more info than short dump
SM30     Maintain Table Views. (from [email protected])
SM31     Table Maintenance
SM32     Table maintenance
SM35     View Batch Input Sessions
SM37     View background jobs
SM50     Process Overview. (from [email protected])
SM51     Delete jobs from system (BDC)
SM62     Display/Maintain events in SAP, also use function BP_EVENT_RAISE
SMEN     Display the menu path to get to a transaction
SMOD/CMOD     Transactions for processing/editing/activating new customer enhancements.
SNRO     Object browser for number range maintenance. (from [email protected])
SPRO     Start SAP IMG (Implementation Guide). (from [email protected])
SQ00     ABAP/4 Query: Start Queries
SQ01     ABAP/4 Query: Maintain Queries
SQ02     ABAP/4 Query: Maintain Funct. Areas
SQ03     ABAP/4 Query: Maintain User Groups
SQ07     ABAP/4 Query: Language Comparison
ST05     Trace SQL Database Requests. (from [email protected])
ST22     ABAP Dump analysis
SU53     Display Authorization Values for User. (from [email protected])
WEDI     EDI Menu. IDOC and EDI base.
WE02     Display an IDOC
WE07     IDOC Statistics
Human Resources
PA03     Change Payroll control record
PA20     Display PA Infotypes
PA30     Create/Change PA Infotypes
PP02     Quick Entry for PD object creation
PU00     Delete PA infotypes for an employee. Will not be able to delete an infotype if there is cluster data assigned to the employee.
Sales and Distribution (SD)
OLSD     Config for SD. Use Tools-Data Transfer-Conditions to setup SAP supplied BDC to load pricing data
VA01     Create Sales/Returns Order:Initial Screen
VB21     Transaction for Volume Lease Purchases (done as a sales deal)
VK15     Transaction used to enter multiple sales conditions (most will be entered here)
SAP Office
SO00     send a note through SAP, can be sent to internet, X400, etc
FI Financial Management
FGRP     Report Writer screen
FM12     View blocked documents by user
FST2     Insert language specific name for G/L account. (from [email protected])
FST3     Display G/L account name. (from [email protected])
KEA0     Maintain operating concern. (from [email protected])
KEKE     Activate CO-PA. (from [email protected])
KEKK     Assign operating concern. (from [email protected])
KL04     Delete activity type. (from [email protected])
KS04     Delete a cost centre. (from [email protected])
KSH2     Change cost centre group - delete. (from [email protected])
OBR2     Deletion program for customers, vendors, G/L accounts. (from [email protected])
OKC5     Cost element/cost element group deletion. (from [email protected])
OKE1     Delete transaction data. (from [email protected])
OKE2     Delete a profit centre. (from [email protected])
OKI1     Determine Activity Number: Activity Types (Assignment of material number/service to activity type) (from [email protected])
OMZ1     Definition of partner roles. (from [email protected])
OMZ2     Language dependent key reassignment for partner roles. (from [email protected])
Material Management (MM)
MM06     Flag material for deletion. (from [email protected])
OLMS-     materials management configuration menu, most of the stuff under this menu is not under the implementation guide
MM configuration transactions
OLMB-     Inventory management/Physical Inventory
OLMD-     MM Consumption-Based Planning
OLME-     MM Purchasing
OLML-     Warehouse Management
OLMR-     Invoice Verification
OLMS     Material Master data
OLMW-     MM Valuation/Account Assignment
Config Related
OLE     OLE demo transaction
OLI0     C Plant Maintenance Master Data
OLI1     Set Up INVCO for Material Movements
OLI8     Set Up SIS for Deliveries
OLIA     C Maintenance Processing
OLIP     C Plant Maintenance Planning
OLIQ     New set-up of QM info system
OLIX     Set Up Copying/Deleting of Versions
OLIY     Set Up Deletion of SIS/Inter.Storage
OLIZ     Stat Set Up INVCO: Invoice Verif
OLM2     Customizing: Volume-Based Rebates
OLMB     C RM-MAT Inventory Management Menu
OLMD     C RM-MAT MRP Menu
OLME     C MM Menu: Purchasing
OLML     C MM Menu for Warehouse Management
OLMR     C RM-MAT Menu: Invoice Verification
OLMS     C RM-MAT Master Data Menu
OLMW     C RM-MAT Valuation/Acct. Assgt. Menu
OLPA     SOP Configuration
OLPE     Sales order value
OLPK     Customizing for capacity planning
OLPR     Project System Options
OLPS     Customizing Basic Data
OLPV     Customizing: Std. Value Calculation
OLQB     C QM QM in Procurement
OLQI     Analysis
OLQM     Customizing QM Quality Notifications
OLQS     C QM Menu Basic Data
OLQW     C QM Inspection Management
OLQZ     Quality Certificates
OLS1     Customizing for Rebates
OLSD     Customizing: SD
OLVA     C SD Sales Menu
OLVD     C SD Shipping Menu
OLVF     C SD Billing Menu
OLVS     C SD Menu for Master Data
SPRO     Start SAP IMG (Implementation Guide). (from [email protected])
reward points if useful.
thanks,
usha

List of Tcodes in SAP(Technical)

Hi Gurus,
Send me a list of Tcodes in SAP.
Thanks in Advance,
Sakthi

Hello Shakthi,
Transactions:
search_sap_menu - Finds the menu path to a transaction - Can either type in TX code in the search criteria or a description- ie. 1st try SE38 and then ABAP.... the returned result is 'bottom to top'.
EDI Specific Transactions
VOE1 Translation between EDI categories and SD item categories
VOE2 Table EDSC view. Customer link to sales area detail
VOE3 Table view EDPVW. Add partner types that will be transferred to the IDoc
VOE4 Table view EDPAR. Link external partner number with our internal number
WEDI EDI Administrator Menu
BALE Idoc Administration
Scheduling agreements
OVA9 Create entries for each sold-to customer for which you will receive EDI schedule releases. At implementation, the only field that needs to be maintained is "Check PO number," which causes SAP to make sure that the PO number sent on the release matches the PO number on the schedule agreement. This transaction updates table T663A. SAP will not post an EDI schedule release, if this record is missing.
OVAI Create entries for each Vendor / Partner description combination. (Vendors must match sold-to Acct. at Cust., and Partner descriptions must match ship-to Partner descriptions.) This transaction updates table T661W. SAP uses this table to determine the schedule agreement sold-to partner.
OVAJ If you would like SAP to post schedule requirements using discrete dates only, instead of weekly and/or monthly buckets, you can indicate the days of the week that you deliver to this customer. SAP will divide the customer's quantity for a week or month evenly into the days of the week specified by the distribution function code. This code must be sent in the DELINS IDoc in field E1EDP16-ETVTF.
IDoc Transactions
WE09 / WE02 IDoc lists according to content. View IDocs via specific IDoc number or business application detail contained within the contents of a segment.
WE05 View IDocs
WE19 EDI test tool. Use to test inbound Function module changes.
WE20 Partner profile configuration. Add partner detail together with inbound and outbound relationships. We also incorporate message control on the outbound IDocs. Utilize the organizational units to trap functional errors for further processing
WE30 Create IDoc extension type
WE31 Segment create
WE57 Assign function module to logical message and IDoc type
WE60 IDoc type documentation tool
WE82 Link Release detail to Extension IDoc Type
BD55 Conversion rule user exit. Link conversion rule user exit to the different system \ partner combinations
BD87 Reprocess IDocs in error or waiting for action. (Both inbound and outbound in 4.6. Use BD88 in prior versions)
BALA ALE Application Distribution
BALM ALE Master Data Distribution
Output determination
856 - ASN
V/36 Maintain output determination for deliveries (Output determination procedures). V10000 (Header output) has condition type LAVA (usually with requirement 1 NB: Use V/84 V7ALLE SHAD for grouped ASNs. I.e. Group deliveries into shipments
VV21,VV22,VV23 Create output condition records for shipping. LAVA WE (Partner function) - We must add each new partner with VV21
VL71 Reissue output for deliveries
810 - Invoice
V/54 Maintain access sequence for billing documents
VV31,VV32,VV33 Create condition records for billing documents. (RD00 RE Billing party)
VF31 Reissue output for billing documents
855 Order Response
V/30 Sales document output types (BA00)
V/48, V/32, V/43 Maintain access sequence for sales documents
VV11,VV12,VV13 Create condition records for sales documents. (BA00 SP Sold to party)
Requirements coding
V/27 Create code to check requirements for output control. Used to check ZBA0 against BA00 output.
Sales & Distribution
Sales order / Quote / Sched Agreement / Contract
VA02 Sales order change
VA05 List of sales orders
VA22 Quotation change
VA32 Scheduling agreement change
VA42 Contract change
Billing
VF02 Change billing document
VF11 Cancel Billing document
VF04 Billing due list
FBL5N Display Customer invoices by line
FBL1N Display Vendor invoices by line
Delivery
VL02N Change delivery document
VL04 Delivery due list
VKM5 List of deliveries
VL06G List of outbound deliveries for goods issue
VL06P List of outbound deliveries for picking
VL09 Cancel goods issue
VT02N Change shipment
VT70 Output for shipments
General
VKM3, VKM4 List of sales documents
VKM1 List of blocked SD documents
VD52 Material Determination
Workflow
SWEAD Event queue administration
SWE2 Event type linkages
SWE3 Event linkages
PPOME Organizational Unit Maintenance
SWE5 Consistency Checks for Event Linkages
SWUD Workflow Diagnostic Tool
General
The following section provides detail on other useful SAP areas.
Create delivery via transfer orders
Once the order is saved proceed through the following steps. The process assumes the item has values in the warehouse bin.
VL04 Delivery due list. Run the delivery due with your order number to create the delivery
LT03 Create Transfer Order. EG. Warehouse: 101 and enter. Picking background. Save
The Transfer order should now be saved. It now needs to be confirmed.
In LT03 go to menu option Transfer Order -> Confirm Transfer Order
Enter
Save
The transfer order is now confirmed.
VL02N Delivery change. EG: Edit the delivery to do the following Pack External customer material number = COO. External delivery number Waybill number. BOL Transport tag. Carrier Header partner SP (E.G. FXP). Tracking number = Packing Unit
Purchase Orders
ME22N PO Change
ME57 Create PO from purchase requisition
ATP
CO09 Availability overview
Goods Movement
MIGO Post goods receipt
MB51 Material document list
MB01 Goods Movement
Other
MD04 Material Requirements. Shows material requirements and releases against materials
SE38 ABAP Editor. Used to modify ABAP programs
SM01 Transaction list. Lock transactions in the system. Also a good tool to see what transactions are available
SHDB Transaction recorder (BDC)
CMOD User exit \ project tool. Coordinates your changes into projects for the purpose of activating all user exits for a particular project. A user exit needs to be modified before it will work
SE16 Table contents display
SOST View mails sent externally from SAP
SU53 Check authorization object
SQVI Table Quickviewer Used to created quick client dependent reports
ST22 ABAP Dump Analysis
ST01 System trace
ST11 Display developer trace
ST05 SQL Trace
SM21 System log
ST22 Display short dumps
SM12 Display locked entries
With Regards,
Vidya
**Please reward with points

BEx Analyzer through SAP Netweaver ABAP trial version

Hi, I have installed SAP Netweaver ABAP trial version but dont know how to get BEx analyzer. Can someone help to find out that.
Thanks,

Hi ,
I doubt if the BW component is present in the NW 7.0 Abap trial.Please check this in Tcode spam -> supp. package levels (all components are listed.there, or via system information in the gui menu.
When component BW is present you can install Bex/Wad etc. via the sapgui CD.
Check these links...
For setting up BI in NW 7.0 Abap Trial version :
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/how%2bto%2bguides
For beginning your first BI model in NW 7.0 :
A beginner's guide to your first BI model in NW2004S
ABAP Trial Version for Newbies :
ABAP Trial Version for Newbies: Part 1 ' Download and installation of the Trial Version '
Installation & Implementation Documentation Center
SAP NetWeaver 7.0
https://websmp105.sap-ag.de/instguidesNW70
SAP NetWeaver7.0 (2004s) Installation & Implementation Documentation
https://websmp105.sap-ag.de/~sapidb/011000358700005431532005E.pdf
https://websmp105.sap-ag.de/installnw70
https://websmp105.sap-ag.de/~sapidb/011000358700005431552005E
Hope this helps,
Regards
CSM Reddy

How can i find SAP Gui logon pad version

how can i find SAP Gui logon pad version ?

Hi,
That's easy. At the top of the logon, you see a title bar with a general version indication. At the most left of it, you'll see an icon. Click on that and choose about SAP logon and you'll get detailed info.
Eddy
PS. Reward the useful answers and you will get <a href="http:///people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself!

Vendor Ageing Report in SAP B1 8.8 Version

Hi All,
I am using SAP B1 8.8 Version.
I have generated Vendor Ageing Report for all Vendors. In this report I found few vendors are appearing multiple times with different Ageing values. I wanted to know why this happend???
Please do the needfull.
Cheers,
Dasari

Hi
Are any vendor names changed in the past?
Thanks,
Gordon

Is SAP NetWeaver Developer Studio Version: 7.0.12 Compatable with JDK 1.5

Hi
I want to user Java SDK version 1.5 instead of 1.4.
Is SAP NetWeaver Developer Studio Version: 7.0.12 compatible with this or not.
Please let me know

Hi
If you are using EP 7.0, then NWDS 7.0.YY version need to be used. //YY depends on your patch of EP7 .As you have mentioned your are using NWDS 7.0.12, that means your portal SP level is SP12.
In my prject i am using JDK 1.4 for NWDS 7.0.15 and its works fine.I have asked two of my colleagues , they told that in their project they are using JDK 1.5 for EP 7.0 server and application is working fine for them.
So
Thanks
Susmita

Logical system for client 001 for SAP NETWEAVER ABAP TRIAL VERSION for BI

Hi,
I have installed SAP NETWEAVER ABAP TRIAL VERSION for BI. In that I have to create logical system for client 001. I have taken a list of available clients from the abap R3 side. Here is a list of it.
Clients View
Cl. Name City Crcy
000 SAP AG Konzern Walldorf EUR
001 Auslieferungsmandant R11 Kundstadt USD
066 Test EarlyWatch Profiles Walldorf EUR
I cannot get inside the BW side for it asks me to create a logical system for client 001. What to do?
Kindly help me.
Kannan

hi,
? First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
? Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
? You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
? Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
? Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
? R/3 - B W - R/3
? Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
? PC ?Flat file , DB ? Database
? Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
? BW ? RS1 ? SOURCE SYSTEM ? CREATE MANUAL AUTOMATIC CELL
? R/3 ? Test connections login ? back ? replicate method ? active data R/3 Source system you will able to.
hope it helps u
Ramesh

Problems starting SAP NetWeaver AS Trial Version

Hello Forum,
Here is the summary of problem that I am facing starting SAP Netweaver AS Trial Version (post suucessful installation). I am mentioning successful installation is because on the day of the installation, I could start the NetWeaver AS Server and login using user BCUSER and go into SE80 (Object Navigator). The trouble started appearing thereafter.
Here is the summary -
When I dont have MS loopback Adapter activated on my Laptop, I get the following in SAP MMC
The dispatcher process thread begins but haves a status - cannot connect to the message server
When I install and activate MS loopback Adapter on my Laptop, I get the following in SAP MMC
The Message Server and Dispatcher Starts Off, After a while (a minute), Dispatcher status turns to Message Server COnnection OK, Dialog Queue Time 0:00, after a While (a minute), it gives a message and stops. After this point Message Server is shown as running and Dispatcher is stopped.
I am attaching the dev_disp for reference. Obviously I think the problem lurking somewhere in the midst of Network Adapter Configuration - Please help me to resolve the same.
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        NSP
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    95
intno      20050900
make:      multithreaded, ASCII, optimized
pid        4808
Tue Oct 27 07:45:11 2009
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4808) [dpxxdisp.c   1239]
     shared lib "dw_xml.dll" version 95 successfully loaded
     shared lib "dw_xtc.dll" version 95 successfully loaded
     shared lib "dw_stl.dll" version 95 successfully loaded
     shared lib "dw_gui.dll" version 95 successfully loaded
     shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c 5217]
Tue Oct 27 07:45:15 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >UKCL515803_NSP_00                       <
DpShMCreate: sizeof(wp_adm)          6328     (904)
DpShMCreate: sizeof(tm_adm)          3605136     (17936)
DpShMCreate: sizeof(wp_ca_adm)          1200     (60)
DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1280)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 04F00040, size: 4205552)
DpShMCreate: allocated sys_adm at 04F00040
DpShMCreate: allocated wp_adm at 04F01A28
DpShMCreate: allocated tm_adm_list at 04F032E0
DpShMCreate: allocated tm_adm at 04F03310
DpShMCreate: allocated wp_ca_adm at 052735A0
DpShMCreate: allocated appc_ca_adm at 05273A50
DpShMCreate: allocated comm_adm at 05273F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 052F4DB0
DpShMCreate: allocated gw_adm at 052F4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 052F4E20
DpShMCreate: allocated wall_adm at 052F4E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Oct 27 07:45:16 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( UKCL515803) [dpxxdisp.c   11663]
DpStartStopMsg: send start message (myname is >UKCL515803_NSP_00                       <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0   monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Tue Oct 27 07:45:56 2009
MBUF state ACTIVE
ERROR => gateway (pid 5188) died [dpxxdisp.c   15372]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
killing W0-5072 (SIGUSR2)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
killing W1-3868 (SIGUSR2)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
killing W2-5148 (SIGUSR2)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
killing W3-5004 (SIGUSR2)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
killing W4-1640 (SIGUSR2)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
killing W5-4780 (SIGUSR2)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
killing W6-4108 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:06 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
max_rq_id          37
wake_evt_udp_now     1
wake events           total    37, udp     9 ( 24%), shm    28 ( 75%)
since last update     total    37, udp     9 ( 24%), shm    28 ( 75%)
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:11 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >UKCL515803_NSP_00                       < (normal)
DpJ2eeDisableRestart
read msgserver-list from MBUF
DpMBufMod: name [UKCL515803_NSP_00                       ], types 159 state 3 (0x0 0x0 0x0 0x0)
AdGetSelfIdentRecord: >                                                                           <
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c   13116]
NiBufIAlloc: malloc wp ca_blk, to 1188 bytes
ALLOC local ca_blk 10000 (len 1188)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 38)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 lives (PID:5072 HANDLE:1616)
[DpWpDied] W1 lives (PID:3868 HANDLE:1612)
[DpWpDied] W2 lives (PID:5148 HANDLE:1608)
[DpWpDied] W3 lives (PID:5004 HANDLE:1604)
[DpWpDied] W4 lives (PID:1640 HANDLE:1600)
[DpWpDied] W5 lives (PID:4780 HANDLE:1596)
[DpWpDied] W6 lives (PID:4108 HANDLE:1592)
Stop work processes
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:12 2009
NiISelect: TIMEOUT occured (1000ms)
wait for end of exclusive shutdown
[DpWpDied] W0 died (PID:5072 HANDLE:1616)
[DpWpDied] W1 died (PID:3868 HANDLE:1612)
[DpWpDied] W2 died (PID:5148 HANDLE:1608)
[DpWpDied] W3 died (PID:5004 HANDLE:1604)
[DpWpDied] W4 died (PID:1640 HANDLE:1600)
[DpWpDied] W5 died (PID:4780 HANDLE:1596)
[DpWpDied] W6 died (PID:4108 HANDLE:1592)
Stop icman
killing process (5208) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 7
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c   13116]
NiBufIAlloc: malloc wp ca_blk, to 14 bytes
ALLOC local ca_blk 10001 (len 14)
return errno (-17) to T7
errormsg without overhead: take mode 0
FREE local ca_blk 10001 (len 14)
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 4 sent data (wrt=14,pac=1,MESG_IO)
set status of T7 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1556 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1556
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=3)
NiICloseHandle: shutdown and close hdl 4 / sock 1556
NiBufIClose: clear extension for hdl 4
dp_tm_adm[7].stat = DP_SLOT_FREE
DpAMCancel: new state of T7/M0 = 0x19
DpAMCancel: set status of M0 to MODE_CANCEL
DpAMCancel: new state of T7/M7 = 0x8
DpAMCancel: set status of M7 to MODE_CANCEL
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 39)
wake_evt_udp_now 1, no dgram needed
created LOGOFF request for T7 U8 M0 !!
wait for end of work processes
[DpWpDied] W0 handle not set (PID:5072)
[DpWpDied] W1 handle not set (PID:3868)
[DpWpDied] W2 handle not set (PID:5148)
[DpWpDied] W3 handle not set (PID:5004)
[DpWpDied] W4 handle not set (PID:1640)
[DpWpDied] W5 handle not set (PID:4780)
[DpWpDied] W6 handle not set (PID:4108)
wait for end of icman
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:13 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:14 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:15 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5208 HANDLE:1636)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 27 07:46:16 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:5208 HANDLE:1636)
DpStartStopMsg: send stop message (myname is >UKCL515803_NSP_00                       <)
NiIMyHostName: hostname = 'UKCL515803'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Oct 27 07:46:17 2009
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1584 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1584 (pos=2)
SiSelNRemove: removed sock 1584
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 6/20/7
WARNING => wp_ca_blks low (in queue 6, max 20) [dpxxdisp.c   13116]
NiBufIAlloc: malloc wp ca_blk, to 356 bytes
ALLOC local ca_blk 10001 (len 356)
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 42)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1584
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4808) [dpxxdisp.c   10333]
Good Bye .....

Hi Sunny,
Thanks for the reply. I checked NETSTAT command and none of the known ports used by SAP is occupied on my laptop.
Also, when I use NIPING - it gies me a familiar message WASNOTREACHED...
I have also attached my IPCONFIG /ALL Output, if somebody could help further.
Windows IP Configuration
         1.0.0.127.in-addr.arpa
         Record Name . . . . . : 1.0.0.127.in-addr.arpa.
         Record Type . . . . . : 12
         Time To Live . . . . : 600511
         Data Length . . . . . : 4
         Section . . . . . . . : Answer
         PTR Record . . . . . : localhost
         localhost
         Record Name . . . . . : localhost
         Record Type . . . . . : 1
         Time To Live . . . . : 600511
         Data Length . . . . . : 4
         Section . . . . . . . : Answer
         A (Host) Record . . . : 127.0.0.1
C:\Documents and Settings\utxk13>ipconfig /all
Windows IP Configuration
        Host Name . . . . . . . . . . . . : UKCL515803
        Primary Dns Suffix . . . . . . . : drink.brew.beer
        Node Type . . . . . . . . . . . . : Hybrid
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : sn.brew.beer
                                            brew.beer
                                            drink.brew.beer
                                            scottishcourage.com
                                            scottish-newcastle.co.uk
                                            ghodom1.scottish-newcastle.co.uk
                                            heiway.net
                                            nl.heiway.net
Ethernet adapter Wireless Network Connection:
        Media State . . . . . . . . . . . : Media disconnected
        Description . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN
        Physical Address. . . . . . . . . : 00-22-FA-57-5E-D4
Ethernet adapter Local Area Connection:
        Connection-specific DNS Suffix . : drink.brew.beer
        Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Co
nection
        Physical Address. . . . . . . . . : 00-26-55-11-C8-04
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : No
        IP Address. . . . . . . . . . . . : 10.10.210.204
        Subnet Mask . . . . . . . . . . . : 255.255.254.0
        Default Gateway . . . . . . . . . : 10.10.210.1
        DHCP Server . . . . . . . . . . . : 10.10.160.167
        DNS Servers . . . . . . . . . . . : 10.10.160.38
                                            10.10.236.10
        Lease Obtained. . . . . . . . . . : 27 October 2009 08:10:17
        Lease Expires . . . . . . . . . . : 31 October 2009 08:10:17
Ethernet adapter Local Area Connection 3:
        Connection-specific DNS Suffix . :
        Description . . . . . . . . . . . : Microsoft Loopback Adapter
        Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
        Dhcp Enabled. . . . . . . . . . . : No
        IP Address. . . . . . . . . . . . : 10.10.0.10
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . :
Regards
Tushar Kansara

Install Trial BO like SAP Netweaver ABAP Trial version

Hello, i would like to know if it´s possible to install some trial Version of BO in orther to install it in my laptop like i´ve just done with the SAP Netweaver ABAP Trial Version 701 (With SAP-BW 70).
I know that that there are some links to download BO software but i really don´t know where to start and if there is any problem with the installation on my laptop with MaxDB ans SAP server installed... basically i have installed SAP with BW in my laptop and it´s working ok. Wich software may i install and wich are the requirements if i want to practice with BO ?
I´ve just downloaded BO from the following link but it´s the correct one ?
http://www.businessobjects.com/forms/datasave.asp?id=701600000008kgy
Besides this i´ve just found another one
https://www.sdn.sap.com/irj/boc/business-objects-for-sap?rid=/webcontent/uuid/806c9894-42a5-2b10-648a-d900489b76da
Wich one i have to install ? it´s the same ? it works with OS XP-Pro ? anything else to install ?
Thanks in advance,
Best regards,
Joaquin Casas

Hi,
this should get you started:
Install Part #1
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
Install Part #2
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-2-of-4
Install Part #3
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-3-of-4
Install Part #4
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-4-of-4
SAP Authentication
/people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
Publishing part 1
/people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
Publishing part 2
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
Publishing part 3
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
XC, CR and LO Part 1 of 4
/people/ingo.hilgefort/blog/2008/10/03/businessobjects-and-sap-part-1-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 2 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-2-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 3 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-3-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 4 of 4
/people/ingo.hilgefort/blog/2008/10/10/businessobjects-and-sap-part-4-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
Technical Material
/people/ingo.hilgefort/blog/2008/11/19/businessobjects-integration-with-sap-netweaver-bi--technical-material
In regards to the supported platforms look at http://service.sap.com/bosap-support
Ingo

SAP Netweaver ABAP Trial Version password expired

Hi All,
I just got an installer for the SAP NetWeaver ABAP Trial Version and I was able to install the Trial version. However, my license have already expired. So what I did was is to renew the license. But my problem right now is that I can't logon using BCUSER. I'm getting "Logon not possible (error in license check".
During the time when I renew the license, i didn't encounter any errors or problems.
Could anybody tell me what I'm doing wrong?
How can I have BCUSER up and running since I need this account to practice ABAP?
I tried deleting the old license using SAP* user because I don't think it is possible to do using that user.
Thanks
James

I have had a similar issue but the above remedy did not fix my problem. I had successfully installed the trial version and used it until the license expired. After downloading a new license, I installed it using SAP*. The installation was successful however, when trying to login using BCUSER I am still getting that same error.
Under slicense, user sap*, I have the following:
NSP TEMPLICENSE NetWeaver_ADA 26.10.2008 25.01.2009 Perm DEMOSYSTEM 000000000311079138 Valid
Sorry for the sloppy cut&paste but you can see that the install appears to be valid.
Is my only recourse to uninstall and reinstall the trial version? Also, is there some way for me to backup any of the work I have done in SE80 before wiping the install?
Thanks in advance,
Rob

Error Install SAP Netweaver ABAP Trial Version 7.01

Hello everyone,
I'm trying to install SAP Netweaver ABAP Trial Version 7.01.
My operating system is Windows XP Professional.
I have 3 GB of RAM and 80 GB of free space.
   Unfortunately, the installation process is stuck in:
   Phase 18 of 27
   Import Monitor jobs: running 3, waiting 20, completed 5, failed 0, total 28.
   In log files there is no error.
   However, after 3 hours the installation stops.
   Can anyone help please?
Regards,
Viviane

Hi all,
Unfortunately I don't have this directory after the error of installation.
I have the following directories:
C: \ usr \ sap \ NSP \ DVEBMGS00
C: \ usr \ sap \ NSP \ SYS
C: \ usr \ sap \ NSP \ tmp
NSP = SID
I looked for errors in the log files but not found. Below is the log file import_monitor.log
INFO: 2010-03-16 21:05:31
Import Monitor is started.
CONFIG: 2010-03-16 21:05:31
Application options:
dbCodepage=4103
dbType=ADA
extFiles=no
importDirs=C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1;C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP2;C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP3
installDir=C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL
jobNum=3
loadArgs=-nolog -c 50000
monitorTimeout=30
orderBy=
r3loadExe=C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2010-03-16 21:05:31
List of packages with table structure: 'SAP0000'.
CONFIG: 2010-03-16 21:05:31
List of packages with views: 'SAPVIEW'.
TRACE: 2010-03-16 21:05:31 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL' template file is started.
INFO: 2010-03-16 21:05:31 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL' template file is successfully completed.
Primary key creation: before load.
Index creation: after load.
INFO: 2010-03-16 21:05:32
Data codepage 4103 is determined using TOC file 'C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\ATAB.TOC' for package 'ATAB'.
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask run
Loading of 'REPOSRC' import package is started.
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'REPOSRC' import package:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\REPOSRC.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" REPOSRC.TSK ADA -l REPOSRC.log
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask run
Loading of 'DOKCLU' import package is started.
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'DOKCLU' import package:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\DOKCLU.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" DOKCLU.TSK ADA -l DOKCLU.log
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC_1' import package is started.
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSEXC_1' import package:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\SAPSSEXC_1.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" SAPSSEXC_1.TSK ADA -l SAPSSEXC_1.log
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Loading of 'DOKCLU' import package into database:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i DOKCLU.cmd -dbcodepage 4103 -l DOKCLU.log -nolog -c 50000
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Loading of 'REPOSRC' import package into database:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i REPOSRC.cmd -dbcodepage 4103 -l REPOSRC.log -nolog -c 50000
TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC_1' import package into database:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC_1.cmd -dbcodepage 4103 -l SAPSSEXC_1.log -nolog -c 50000
INFO: 2010-03-16 21:15:34 com.sap.inst.migmon.LoadTask run
Loading of 'DOKCLU' import package is successfully completed.
TRACE: 2010-03-16 21:16:02 com.sap.inst.migmon.LoadTask run
Loading of 'SMIMCONT1' import package is started.
TRACE: 2010-03-16 21:16:02 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SMIMCONT1' import package:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\SMIMCONT1.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" SMIMCONT1.TSK ADA -l SMIMCONT1.log
TRACE: 2010-03-16 21:16:29 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SMIMCONT1' import package into database:
C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i SMIMCONT1.cmd -dbcodepage 4103 -l SMIMCONT1.log -nolog -c 50000
Below the log file import_monitor.java
java version "1.4.2_19"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_19-b04)
Java HotSpot(TM) Client VM (build 1.4.2_19-b04, mixed mode)
Import Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
Import Monitor jobs: running 2, waiting 26, completed 0, failed 0, total 28.
Import Monitor jobs: running 3, waiting 25, completed 0, failed 0, total 28.
Loading of 'DOKCLU' import package: OK
Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.
Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.
Below the 'last log file created before the abrupt interruption of the installation:
File name: SMIMCONT1.log

SAP 7.2 Trial Version

Guys,
I am installing SAP 7.2 Trial Version and encountered some security issues while installing.
I attempt to install again but I am stuck on the SAP System Administrator/SAP System Service User, the installation is requesting a password.
This was on installation #2. Define Parameters. I need help.
Kind regards,
EugeneA

The next message I got is:
Do you want to create a customer support message? You can now:
Choose OK to create the support SAPCAR archive SUPPORT.SAR
Choose Stop to stop the task and continue with it later
The SUPPORT archive contains the following files
> C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\change.log C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\FormalPasswordCheck.1.log C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\FormalPasswordCheck.log C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\msiexec.1.log C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\msiexec.log C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\sapinst.log C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\sapinst_dev.log C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\sapinst_loginquirer.log C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\SdbCmdOut.log C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\SECINSTTOOLS.log C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\syslib_priv.log C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\vcredist_x86.1.log C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\vcredist_x86.log C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\controllerKdbClient.dmp C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\stepKeydbClient.dmp C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\start_dir.cd C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\control.xml C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\keydb.xml C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\summary.html C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\instana.xsl C:\Users\ENA\AppData\Local\Temp\sapinst_exe.5836.1295676301\dev_selfex.out C:\Users\ENA\.sdtgui\.sdt_keystore_nw2007 C:\Users\ENA\.sdtgui\log\FileService.log C:\Users\ENA\.sdtgui\log\MIDService.log C:\Users\ENA\.sdtgui\log\NotesService.log C:\Users\ENA\.sdtgui\log\SAPinstService.log C:\Users\ENA\.sdtgui\log\SDTServer.log C:\Users\ENA\.sdtgui\log\server.err C:\Users\ENA\.sdtgui\log\server.out C:\Users\ENA\.sdtgui\log\server.trc.
Kind regards,
EugeneA

Crystal Report In SAP Software (4.7 Version with net weaver)

Dear Sir
With reference to above mentioned subject i want to knowthe complete knowledge about crystal reports, as currently my organization is implementing a SAP Software(4.7 version). the information i required about crystal report is how much it will cost me with complete technical specification such as how crystal report will be integerated and implementated with SAP (Please provide me a complete document so that we can make a decision to purchase crystal report with complete Pros & Cons.
I, therefore request to email me the complete information in this regard on my email adress:[email protected] or on [email protected]

Replied via email directly.
Thomas Stoesser
Business Objects

Design of Crystal Report in SAP B1 8.8 Version

Hi,Please Tell me how can i designed & developed Crystal Report in SAP B1 8.8 version I want to display Sales
Order in crystal report and work order report from screen made by screen printer

Hi
Check below link.
[https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples]
Thanks
Kevin

CTBW_META tcode in SAP BI 7.0 version

Similar Messages

Maybe you are looking for