CTI OS desktop client freezes after release of transferred call

Using CTI OS desktop v7.5(9), UCCE 7.5(9), Endpoint is CIPC 8.6.3 on CUCM 7.1.3
ACD call received by Agent 1 on ext 1111
Agent 1 transfers to 1112
Agent 2 answers transferred call on 1112 using answer call button.
Agent 2 disconnects using Release Call button on CTI OS desktop
Call disconnects but stays in grid with status 'Talking' and buttons on CTI OS desktop become unresponsive. CIPC is fully usable independently.
Agent 2 can reset by killing the CTIOS Desktop process and restarting.
This condition ONLY occurs as the result of an inbound transfer to Agent 2. It does not appear to happen when a call is transferred to Agent 1 in a similar scenario (Agent 1 is on a 7942)
Any thoughts as to why this occurs?
Thanks so much for any assistance!

Hi,
looks like for some reason the CIPC does not informs the CUCM about the call released event. Or it does, it's only the JTAPI gateway that misses it.
Did you try upgrading/downgrading the firmware of the CUPC?
Also, I am not quite sure that CIPC 8.x is supported. It might be, but it certainly is not on the list:
http://docwiki.cisco.com/wiki/Unified_CCE_Software_Compatibility_Matrix_for_ALL_7.x_Releases
G.

Similar Messages

PO change after Release

Dear All,
One our client wants after release of the PO (we have only 1 level), system should not allow to chage the PO.will it possible?
Regards
venu gopal

hi
use shortcut as
OLME>Purchase Order>Release Procedure for Purchase Orders>Define Release Procedure for Purchase Orders>Release indicator-->maintain 1 in 3rd column
Vishal...

HP Pavilion P7-1225 Desktop Freezes After Startup. Frustrated!

Hi,
My family's HP Pavilion P7-1225 desktop computer freezes a few moments after startup, most times. However, it will occasionally work just fine for hours and then suddenly lock up. Over the weekend a sort of clicking sound was heard followed immediately by the freeze. Restarted a few times, heard noise, got lock up. We're not hearing the noise now but it's still freezing up.
We have yet to talk to HP Support about it, but no other professional has been able to solve it (and we have had many try). Please help!
Thanks in advance,
Leo

Hi Leo,
Many things could be causing your issue. Intermittent freezes can be very difficult to solve. Since so many professionals have already tried to solve your issue then it's probably time to contact HP Support. As such, I am not going to suggest what has probably already been suggested and/or tested.
I don't know if you are using an UPS but transient changes in line voltage (too low or even too high) will often times cause a failover and clicking noises (relay closing and opening) with some UPSs will be heard. I hear clicks from my UPS at times even though the lights don't flicker. A poor or faulty UPS could cause issues like you are experiencing. You might also having an electrican check the circuits in your house. You might want to isolate your PC equipment off circuits that might have high current start up devices that might cause local voltage surges.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Remote desktop (MAC) app freezes after a sleep/scree-timeout

Hello,
My company needs the Remote Resource Connection -> Remote Desktop Client to be used to connect to Windows (7) desktops over the Internet. The connection is through duo-authentication and once connected all works fine. Highly recommending the Microsoft
Remote Desktop for MAC therefore.
One small annoying glitch I found was when the MAC goes to sleep or screen shuts off (This happens about in a minute to save battery). Once the screen awakes, the Remote Desktop doesn't seem to be able to restore it state. What I notice is that the screen
for Remote Desktop is Frozen. MAC is not frozen, its healthy and all the rest of the apps seem to work fine, just this Remote Desktop app isn't. I will have to either kill the process from the command line (terminal) or just exit the Remote Desktop app (well,
its not frozen, the menus work fine) and restart the process of logging in.
Any advise to fix this issue? Or is this a bug and needs fixing? Please ask if you need further from me.
Thanks
Madu

Hi,
Would you please provide us the log file after you reproduce the issue. Also, please give us the timestamp you put your Mac to Sleep.
Thanks.
Jeremy Wu
TechNet Community Support

Missing "sharing" option in system preferences after installing apple remote desktop client version 2.10

Hi All,
I installed a wrong version of Apple remote desktop client , 2.10 and the sharing menu under system preferences vanished. I tried to uninstall the Apple remote desktop with,
http://support.apple.com/kb/HT2577
but no luck, but after restarting the macbook pro with lion 10.7.2, i see my sharing option enabled but when clicked, it says the system preference has to restart and confirming that it restarts in 32 bit mode and even after clciking the sharing option it says, "you can't open sharing preferences because it doesn't work on an intel-based mac"
. So i strongly believe the apple remote desktop is creating the issue.
Can someone help how to fix this please?
Thanks

Same problem here. I manage several remote Macs, but I have one MacBook which I can get no ARD access to (black icon). I can ping the IP, I can SSH into the MacBook, the ARD and Remote Login services are checked ON, the firewall is OFF. The ARD service is configured to allow my admin user full access - however, I get nothing. I have no trouble getting into the other Macs.
Any ideas?

When will Apple fix Lion OS X v10.7 from freezing after my 27" Mac is put to sleep? I must admit that I am amazed that Apple would release an OS that has this problem, for that matter any serious problem.

When will Apple come up with a fix for Lion OSX v10.7 from freezing after Lion is put to sleep? My 27"Mac freezes after being put to sleep and a hrad boot is required to be able to use the system. I have complained to the local Apples store numerous times. The Genious Bar re-installed the OS and it crashed the very next day and continues to crash two or three times per week. I am amazed that Apples would relase a product, any product before it has been proven to be solid, then again, look at the release of the newest IPhone 4-S.

Neil from Oz wrote:
So do you have a question about how to fix your system?
The question/problem is "My 27"Mac freezes after being put to sleep."
Gabor, I can't help, except to report that I, too, experience very frequent unexplained crashes and freezes in Lion. However (so far) not when I put it to sleep.
There are a lot of reports about freezes. Here's one. Maybe you should join that thread. Someone there is also reporting that "Lion has a bug that freezes the system when waking the system from sleep."
Are you getting freezes/crashes at other times or only when sleeping the computer?
And does it successfully go to sleep?
Does it freeze when you wake it, or at the point where you're putting it to sleep?

Log in user (admistrator) freeze after desktop screen

all other log in users are working fine, but my administator log in freeze after desktop screen,
I used the original G5 install disk to start up the computer to run tool disk, but it can't repair the problem, I have techtool pro and it reports a problem and also says the computer it's corrupted, what should I do.

Unfortunately, no. This is one of my classroom machines, and I don't have the storage capacity to keep them all backed up.

Remote Desktop Client 8.1.3 Display Issue

We're running Microsoft Remote Desktop 2012R2 services including a Gateway/Connection Broker/Licensing server and Remote Desktop Session Hosts servers. Our clients include Windows systems, iPads and iPhones.
Since the upgrade to Microsoft Remote Desktop Client for IOS 8.1.3 (which fixed our gateway connection issues using the previous 8.1.x IOS clients), we're still unable to use our iPads with a published application that runs a time clock to check
children in/out of daycare centers.
When launching the published application, the display does not scale to full screen. A portion of the screen contains a black bar around the bottom and to the right of the window. The touch control needed is hidden by
the black bar. This issue did not exist in clients prior to 8.1.x nor does it exist in Windows clients.
Using the Pan Control does not resolve the issue. If you activate the Pan control, the application is so magnified that you only see about 1/4th of the upper left of the screen. Moving the window around or pinch to zoom in/out does not resolve
the issue.
Note that we have also published Microsoft Office 2010, Adobe Reader, Calculator and network share folders. None of these apps experience the issue with a black bar hiding a portion of the application window.
Any suggestions?

Hi Dharmesh - Yes, we did reinstall the RD 8.1.3 IOS client on our iPads a few times. And to answer your question, we are using a childcare software from the following company:
http://www.procaresoftware.com/
Microsoft Office 2010 as a published application appears to be functioning correctly with the iPads, although it hasn't been extensively tested. Most of our remote desktop Office users are on Windows 7 systems.
I've notified the Procare Software technical support team of this iPad issue and they forwarded the information on to their developers. They are releasing an updated version of their software some time in the next week. They have enhanced
the resizing / rotation support for tablets in the next upgrade release, but are unsure whether our iPad display issue will be resolved.
If the issue is not resolved by the upgrade, they suggest we seek a resolution from Microsoft. In the meantime, Procare stated that I could share this information with you. They're also copied on this forum to keep up with your comments.
Note: After we install the future upgrade of Procare Software, I'll report back here with the results.
Regards.

CC desktop client doesn't display available updates

After a rocky start I was finally able to download the desktop client. It was fine at first and allowed me to install CC trials, update trials, sync settings, etc.
I'm still able to sync settings and use my software, but CC doesn't display all the new updates that came out recently. It's been like this for a couple days that I know of, and I was able to download all of those updates on Monday from my work machine which is also running trials off the same account.
Mac OS X 10.8.4
Creative Cloud 1.0.0.183

Wow, Adobe customer support is the worst I've ever used. Not these boards, these have helped me a lot in the past, but everything else.
Support has done nothing but vehemently try to convince me that I don't have a problem. "If CC desktop says 'up-to-date' then it's up-to-date." This has been their mantra. I plead with them, "No, my version of Premiere Pro is at 7.0.0 and the current release is 7.0.1." Then they just read the same line from their script, "If it says 'up-to-date' …"
One support guy even said to me, after I explained and re-explained my issue many times, "I don't understand, so why is your other computer getting updates and this one is not?" Gee, I don't know, THAT'S WHY I'M CALLING YOU!
I'm told to try the same basic things I've tried time and time again. I keep getting passed off to other people who quickly give up and tell me there's nothing they can do except pass me off to someone else.
It's been over a month that I've had this problem, ever since I installed Creative Cloud. I have encountered lots of bugs in the software, there are certain things I cannot do in my apps and I really need to get this resolved.
Sorry to rant and rave on a forum meant for utility, but this is the worst customer support experience I've ever endured, and I guess i'm trying to illustrate that THIS FORUM IS MY ONLY HOPE.
Please, any tips, advice, suggestions, any help from you knowledgable forum members is really appreciated. I really like the CC suite in theory, but I can't continue to be a creative cloud member if I am resigned to only using buggy release software for the foreseeable future on my primary computer.
I am not going to pay $50 a month for something so broken that I am not getting any support on.
Thanks,
Evan

My Mac freezes after waking up

I have a rMBP mid 2014 that keeps freezing after sleep, but not every time, since I upgraded to latest Yosemite 10.10.3. I can move the mouse and close all active programs, but it takes long time and will anyway not restart after that. I have to force power off and then power on again, then it will work for a while.
I have tried to do the upgrade again och even tried to reinstall Yosemite again, but it didn't help. Here's a report:
EtreCheck version: 2.2 (132)
Report generated 5/5/15, 11:24 AM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (Retina, 13-inch, Mid 2014) (Technical Specifications)
    MacBook Pro - model: MacBookPro11,1
    1 2.8 GHz Intel Core i5 CPU: 2-core
    16 GB RAM Not upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n/ac
    Battery: Health = Normal - Cycle count = 52 - SN = C01446209C2FT60AN
Video Information: ℹ️
    Intel Iris
        Color LCD 2560 x 1600
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:10:5
Disk Information: ℹ️
    APPLE SSD SM0256F disk0 : (251 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 249.80 GB (87.51 GB free)
            Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/Parallels Desktop.app
    [not loaded]    com.parallels.kext.hypervisor (10.2.0 28956 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.netbridge (10.2.0 28956 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.usbconnect (10.2.0 28956 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.vnic (10.2.0 28956 - SDK 10.7) [Click for support]
        /Library/Extensions
    [not loaded]    com.Elgato.Thunderbolt2DockChargingSupport (1.0.0 - SDK 10.10) [Click for support]
    [not loaded]    com.Elgato.ThunderboltDockChargingSupport (1.0.0 - SDK 10.10) [Click for support]
    [not loaded]    com.elgato.ElgatoThunderboltDockAudioRename (1.0.2 - SDK 10.10) [Click for support]
Startup Items: ℹ️
    HWNetMgr: Path: /Library/StartupItems/HWNetMgr
    HWPortDetect: Path: /Library/StartupItems/HWPortDetect
    StartOuc: Path: /Library/StartupItems/StartOuc
    Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Agents: ℹ️
    [loaded]    com.acronis.acep.plist [Click for support]
    [running]    com.teamviewer.teamviewer.plist [Click for support]
    [running]    com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
    [failed]    com.apple.spirecorder.plist
    [running]    com.bombich.ccchelper.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [running]    com.teamviewer.teamviewer_service.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Program (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    XtraFinder    Program (/Applications/XtraFinder.app)
Internet Plug-ins: ℹ️
    MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
    SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
    nplastpass: Version: 3.1.77 - SDK 10.10 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
    Open in Internet Explorer
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        Macintosh HD: Disk size: 249.80 GB Disk used: 162.29 GB
    Destinations:
        Images [Network]
        Total size: 2.20 TB
        Total number of backups: 17
        Oldest backup: 2014-12-01 13:56:38 +0000
        Last backup: 2015-04-06 09:44:01 +0000
        Size of backup disk: Excellent
            Backup size 2.20 TB > (Disk size 249.80 GB X 3)
Top Processes by CPU: ℹ️
        77%    mdworker(9)
         3%    WindowServer
         2%    fontd
         0%    Microsoft Lync
         0%    taskgated
Top Processes by Memory: ℹ️
    820 MB    kernel_task
    377 MB    com.apple.WebKit.WebContent(5)
    360 MB    Microsoft Outlook
    246 MB    Dock
    164 MB    mdworker(9)
Virtual Memory Information: ℹ️
    10.00 GB    Free RAM
    6.03 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 5, 2015, 11:13:37 AM    Self test - passed
I'd be grateful for any help.

Rid the MBP of CleanMyMac. It may very well be the source of your problems.
NO so called cleaning or performance applications should be installed in a Mac. At best they will do nothing, at worst they can corrupt your system.
Ciao.

IOS Remote Desktop Client Logon Issue Prompts to Logon 3 Times with RDGW

I have an issue when connecting from the Remote Desktop client iOS on multiple iPads/users.
First a little background: We have an RDS Web Access / RDS Gateway (2012 R2) setup and properly configured. We can logon using it just fine from the Mac OS version of the app, Android version of the app, or from a Windows PC. When we try to
connect via the iOS app we get the prompt to logon 3 times. Due to security reasons, we do not want them to store their credentials on the iPads, which is the only method I have found to eliminate the triple password entry. It only prompts once on the Mac
OS version, Android version or from a Windows PC.
The password isn't being entered incorrectly and the servers are not registering any Audit Failures for the logon attempts. Can you assist?
Additionally I would like to recommend the addition of a feature to be able to setup remote resources but prompt for the password on app launch for security reasons. That way they would have to enter it once but then they could access any resources needed.
Thanks,
Nate L

I am not comfortable posting the entire log file but let me give you the high level summary. The settings section for the active connection:
[2014-Jun-17 12:45:23] RDP (0): Final rdp configuration used: {
    activeUsername = "domain\username";
    arcTimeout = 1800;
    configurationVersion = 8;
    console = 0;
    gatewayId = XXXXXXXX;
    host = "InternalServerHostName.domain.local";
    label = "";
    mouseMode = "-1";
    offsetX = 0;
    offsetY = 0;
    peerIp = "ExternalRDSGatewayIP";
    port = 3389;
    previousMouseMode = 1;
    previousUtilityBar = 0;
    screenshotScale = "0.125";
    soundMode = 1;
    swapMouseButtons = 0;
    type = rdp;
    utilityBar = "-1";
    zoomFactor = 1;
    connections =
        ...bunch of addresses...
    host = "ExternalRDSGatewayHostName";
    id = XXXXXX;
    port = 443;
    temporary = 1;
    type = rdp;
    kCFProxyTypeKey = kCFProxyTypeNone;
It then attempts to connect to the InternalServerHostName.domain.local.
[2014-Jun-19 09:40:01] RDP (0): Resolved 'InternalServerHostName.domain.local' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
[2014-Jun-19 09:40:01] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
[2014-Jun-19 09:40:01] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-19 09:40:02] RDP (0): Showing credentials dialog
It then displays the same settings again with the exception of an additional line after the gatewayId line:
gwAutodetectState = kConnectionGwAutodectedForceGW;
Then it goes through the interface list, not using any proxy, correlation id, then resolves name:
[2014-Jun-19 09:40:10] RDP (0): Resolved 'ExternalRDSGatewayHostName' to 'ExternalRDSGatewayIP' using NameResolveMethod_Unknown(0)
[2014-Jun-19 09:40:11] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 217
    User Message : The gateway failed to connect with the message: 403 Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator.
[2014-Jun-19 09:40:11] RDP (0): Error message: The gateway failed to connect with the message: 403 Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator.
)(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2014-Jun-19 09:40:11] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Jun-19 09:40:11] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-19 09:40:11] RDP (0): Showing credentials dialog
Then it displays the same settings again except for the gwAutodetectState line changing to:
gwAutodetectState = kConnectionGwAutodectedHTTPSTried;
Then it connects ok. I went to our firewall (MS Forefront TMG) and monitored for traffic from the iPad iOS App (based on network it is on). I don't see the initial connection attempt at all, which is expected because according to the log above it looks
like it tries to connect to the host directly...which it shouldn't?
Then in the second attempt I see it trying to go to http://ExternalRDSGatewayHostName:443/remoteDesktopGateway/ which again it shouldn't be doing because that URL (the remoteDesktopGateway) is not part of the RDSGW or RDSWA 2012 R2 IIS
config or am I missing something? It should be going to Rpc or RDWeb right? or do I need to allow that path through too?
Thanks,
Nate

Firefox 4 freezes after i open it (keeps loading the page non-stop and i cant click or do anything

firefox 4 freezes after i open it (keeps loading the page non-stop and i cant click or do anything, plus there is no option to report an error so i cant even get this checked and this seems to be the case on 3 different computers i use all have windows 7 32bit.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

Office 2013 - RemoteApp & Remote Desktop Client

When launching Office products from the Remote Desktop Client with Remote Resources / RemoteApp in OSX Mavericks. e.g. Office Word 2013 it is extremely slow and unresponsive. It opens to fill the screen but not full screen, cropping above the dock and below
the MAC toolbar. This is not apparent in Windows Surface Pro / RT / 7 / 8, Android, iPad / iPhone iOS
If I restore down the Window it seems to remove a white outer bar and then works as intended, even if I manually click and drag more or less to the same size of the maximised window. I believe this may be due to the Office 2013 shadow. In GPO I have:
- Added a registry to DisableAnimation
-Enabled 'Disable Office Animations' in the Office 2013 ADMX
-Enabled 'Do not use hardware graphics acceleration' in ADMX
Before:
https://heathsideschool-my.sharepoint.com/personal/bmoore_heathside_surrey_sch_uk/_layouts/15/guestaccess.aspx?guestaccesstoken=zfEfs30OKP8jaTL5vAjZBnFqPefGBcD4nNUqZHs3JAs%3d&docid=05b1d2a4c002e4152844656608eef7a9d
After:
https://heathsideschool-my.sharepoint.com/personal/bmoore_heathside_surrey_sch_uk/_layouts/15/guestaccess.aspx?guestaccesstoken=9aUKxic763dU7n2z3vxSDBkbXhyDo%2fo3P0jrEh08gtw%3d&docid=092297a567b51448e98ea674e3fab97f6
I am running:
OSX Mavericks
Mac Retina
Server 2012 R2
Kind regards,
Bobby Moore

Hi Bobby,
Let us start with opening Word in its application safe mode. Follow these steps to do so:
Hit Windows key on the keyboard, and start typing
winword /safe in search bar and hit Enter.
If the application works fine safe mode, try disabling the add-ins for the application and check the result:
Click the File tab.
Go to Options.
click Add-ins.
Select or clear the options that you want.
unchecked the add in like send to Bluetooth and something regarding office one not.
Let us know if you need further assistance .

After installing 10.9.4 computer freezes after sleep

After I installed 10.9.4, my Imac bean to freeze after being asleep. Sometimes I can move the mouse, but it has no effect on anything. Most of the time I move the mouse or keyboard and I get eh color wheel of death. Here is my info, can you help?
EtreCheck version: 1.9.12 (48)
Report generated August 6, 2014 at 7:06:43 PM MDT
Hardware Information:
iMac (27-inch, Mid 2010) (Verified)
iMac - model: iMac11,3
1 2.93 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
ATI Radeon HD 5750 - VRAM: 1024 MB
iMac 2560 x 1440
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 5:12:25
Disk Information:
WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 902.82 GB (631.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 84.56 GB (38.76 GB free)
PIONEER DVD-RW DVRTS09
USB Information:
Apple Inc. iPhone
Logitech USB Receiver
Apple Internal Memory Card Reader 31.91 GB
NIKON D7000 (disk1s1) /Volumes/NIKON D7000: 31.91 GB (28.3 GB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Fitbit Inc. Fitbit Base Station
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
FireWire Information:
G-TECH OEM ATA Device 00 800mbit - 800mbit max
EFI (disk2s1) <not mounted>: 209.7 MB
G-DRIVE (disk2s2) /Volumes/G-DRIVE: 999.86 GB (937.8 GB free)
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] arcana.PRAM (6.1) Support
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
[loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.52) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.45) Support
Startup Items:
ArcanaStartupSound: Path: /Library/StartupItems/ArcanaStartupSound
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.avast.init.plist Support
[loaded] com.avast.uninstall.plist Support
[loaded] com.avast.update.plist Support
[running] com.crashplan.engine.plist Support
[running] com.fitbit.galileod.plist Support
[failed] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.rim.BBDaemon.plist Support
[loaded] com.timesoftware.timemachineeditor.backupd-auto.plist Support
[failed] com.vmware.launchd.vmware.plist Support
[not loaded] com.vsearch.daemon.plist Support
[failed] com.vsearch.helper.plist Support
Launch Agents:
[loaded] com.avast.userinit.plist Support
[failed] com.google.keystone.agent.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[failed] com.vsearch.agent.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.avast.home.userinit.plist Support
[running] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items:
SpeechSynthesisServer
Canon IJ Network Scanner Selector EX
Dropbox
CrashPlan menu bar
Fitbit Connect Menubar Helper
Internet Plug-ins:
Easy-WebPrint EX: Version: 1.1.0 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
AdobePDFViewerNPAPI: Version: 10.1.10 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Silverlight: Version: 5.1.10516.0 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.10 Support
npDDRia: Version: 0.0.14.2 - SDK 10.9 Support
EPPEX Plugin: Version: 3.0.5.0 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
avast! Online Security: Version: 9.0.2022.120
1Password: Version: 4.2.3
Dragon Dictate: Version: 12.81.000.006
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Secrets Support
ArcanaStartupSound Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 840.81 GB Disk used: 252.37 GB
Destinations:
G-DRIVE [Local] (Last used)
Total size: 931.19 GB
Total number of backups: 33
Oldest backup: 2014-03-03 19:34:10 +0000
Last backup: 2014-03-13 00:00:27 +0000
Size of backup disk: Adequate
Backup size 931.19 GB > (Disk used 252.37 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      1% WindowServer
      1% fontd
      1% CrashPlan menu bar
      0% Fitbit Connect Menubar Helper
      0% Dropbox
Top Processes by Memory:
164 MB softwareupdated
131 MB mds_stores
131 MB com.avast.daemon
123 MB CrashPlanService
106 MB Finder
Virtual Memory Information:
4.89 GB Free RAM
1.83 GB Active RAM
525 MB Inactive RAM
781 MB Wired RAM
1.96 GB Page-ins
0 B Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$ \$.+\$/\\\2x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print($2,$3,a[n],$1)|p;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Remote Desktop Connection freezes Windows 7 64-bit

At home, I just upgraded from a Windows 7 Ultimate 32-bit desktop to a new Dell with Windows 7 Ultimate 64-bit OS. Remote Desktop Connection from my old home PC to my work PC worked great for years even after upgrading both to Windows 7 Ultimate. Now everytime I try to use Remote Desktop Connection (RDC) to connect into my work PC (with Windows Ultimate 7 32-bit) the RDC window will freeze after a new seconds of use. If I wait approx 3 minutes the RDC window will unfreeze for a few seconds before freezing again. If I minimize the RDC window on my home PC, I can continue to work because it's only the RDC window that is frozen. Here is everything I've tried already that has not helped:
1. Trying reducing the home PC screen resolution
2. Downloaded the latest 64-bit driver from NVIDIA for the GTX 260 graphics card
3. Taken my home PC to work to test behind the company's firewall--doesn't help
4. Disabled Window Auto Tuning (suggestion from this website)
5. Called Dell support--they tried for about an hour to help but couldn't; thier suggestion was to order Windows 7 32-bit version OS and install it
6. Tried running the 32-bit version of mstsc.exe - no help
7. Using MSCOMFIG, disabled all Startup items - no help
I have another home PC running Windows XP, it works perfectly using RDC to connect to my work PC. Also, I have no problem at all using RDC from my work PC back into my home PC (the other direction).
Here may be a clue: if I start up my new Dell Windows 64-bit OS in Safe Mode, the RDC session does not freeze.
Any suggestions would be appreciated!

Hi,
Since it works in Safe Mode, I suspect this should be related to some conflicts, please try the methods in the following Knowledge Base article to have a check:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
In addition, please also ensure the NIC drivers on all of the computers are up-to-date.
Hope this helps. Thanks.
Nicholas Li - MSFT

CTI OS desktop client freezes after release of transferred call

Similar Messages

Maybe you are looking for