CTI OS Supervisor desktop Sorting by agent status

Hi All,
Could you please let me know how to sort the agents by their status like ready/not ready/logout. Is it required for us to custom the application or is it available in the normal CTI OS supervisor toolkit. We are running on the version 8.0(1)

Paul, I think you're talking about the Cisco Supervisor Desktop, and not the CTIOS Supervisor desktop as mentioned by Dass.
The ctios supervisor desktop team lists are not sortable. You will need to create a custom desktop for that.
Brian
Edit: There is an example of an agent team list that comes with the ctios toolkit. On my install it was at:
C:\Program Files\Cisco Systems\CTIOS Client\CTIOS Toolkit\dotNet CIL\Samples\All Agents Sample.NET
As far as I remember these lists are sortable. Perhaps you can use this example in your custom app.

Similar Messages

  • CAD Agent blinks in and out of Supervisor Desktop

    Got a problem that started yesterday. Running UCCX 7.0(1)sr5 and I've got this agent that comes and goes from the supervisors desktops. Cadence is about every 2 seconds she appears then disappears.
    Any ideas?
    Thanks in advance.

    Hi Cbelcher,
    Problem
    Cisco Agent Desktop agent appears and disappears from the Cisco Supervisor Desktop.
    Intermittently Agent begins to disappear and appear on the Supervisor Desktop under Team Agent state Report.
    Solution
    This problem is caused when multiple threads do not exit correctly  under Agent desktop PC. When the CHAT communication on TCP Port 59000  and 59020 between Client and Server has been lost due to network  interruption/outage. CAD is unable to recover from this and creates  multiple Agent.exe instances.
    Exit out affected Cisco Agent Desktop application and launch CAD again.
    Reference:
    http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008035309f.shtml
    Hope it helps.
    Anand
    Please rate helpful posts by clicking on the stars below the right answer !!

  • Supervisor Desktop - Real time status shows the deleted agents

    Hi All,
    Recently we modified only the agent IDs for few agents.In ICM we just edited the previous entry. We have not deleted and re created it. Now the problem is the in "Supervisor Desktop - Real time status" the old entries are also reflecting in logout state. Exit_OPC will help us to remove this stale values. But is there any other metheod to to achieve this without impacting the production?
    Regards,
    Adithya

    Hi David,
    Thanks for your response. We cannot reinstall the Supervisor desktop there are multiple supervisors for this team. Will wait and check if the stale entry goes automatically. Please let me know if u come across any other process which will help in doing this.
    Regards,
    Adithya

  • Agent disappearing from Supervisor Desktop

    Greetings -
    Can someone help find a solution to my below problem..
    Environment:
    Cisco Unified CCX premium
    9.0.2 SU2 version
    Agent desktop: 9.0(2) (Premium); Build: 9.0.2.2021
    Problem:
    We have three agents out ten who regularly disappear from supervisor desktop.  I opened a TAC case with Cisco but could not figure out what is causing the problem.  The agent desktop is installed on Win7 64bit, Kaspersky antivirus and no firewall between UCCX and agent.  Between UCCX and agent, we have a Cisco 4500 connecting 6500.  I also opened a case with Cisco switching team to check if switches have any role in agent disappearing, but nothing was found on the switches.  It is interesting that only three users are affected out of all.  The affected users' logs on to CAD without any issues in the beginning of the shift, however, after couple of hours i.e. around 11 am agents start to disappear from the supervisor desktop.  After the agent disappears, the CAD chat windows appears like below and the <Unavailable> status in the chat windows changes constantly every 10 seconds to <Initializing>
    The UCCX capture shows the following:
    <AGENT_DESKTOP_user11>.  The application will be logged out.
    2014-08-20 03:09:46:249 WARN FCCS3008 Network communication error <COMM_FAILURE> sending message to application <AGENT_DESKTOP_mwoods>.  The application will be logged out.
    2014-08-20 03:09:50:021 WARN FCCS3008 Network communication error <COMM_FAILURE> sending message to application 
    The agent logs shows that the heart beat is sent to the UCCX but UCCX dose not receive anything.  While all these are happening, the user can still receive and answer calls, the supervisor though cannot see the user, the reports she runs displays user metrics.  However, after few hours, the agent will appears again on supervisor desktop or re logging will make the user appear again.
    Has anyone experienced this strange issue? 
    Thank you in advance.

    Thank you for prompt response. 
    What I did few weeks ago was, created a new account, assigned queues to that new account and then asked the used to use that account just to check if the issue is specific to user account.  Even then, the agent (newly created account) was disappearing. 
    I am sure if I ask the user to use the working agent account, will not have a problem.  I will have to check with the supervisor if they want to try this out.  I will update you momentarily. 

  • IPCC/UCCX CAD and Agent/Supervisor desktop on Windows 7

    Any word on when Windows 7 will support CAD for Agent and Supervisor’s?

    The product Bulletin indicates CAD will be compatible with Windows 7 in version 7.5(8)
    Cisco Agent Desktop, Cisco Supervisor Desktop, and Cisco CTI Toolkit Options
    Version 7.5(8), FCS Q1CY10
    Version 8.0, FCS Q1CY10
    However, the release notes for 7.5(8) do not show this as being compatible.  Any Ideas on when this is projected? 
    Version 8 does offer Windows 7 support.

  • Cisco Agent Desktop / Supervisor Desktop Issue with Full Disk Encryption

    Has anyone had any issues related to running Cisco Agent Desktop or Cisco Supervisor Desktop on a machine running full disk encryption?  Our desktop team installed full disk encryption software from Check Point, and it seams to be causing some issues with call monitoring, screen pops via workflow and connectivity to the UCCX server.  It's not effecting every machine (that we know of), but the fix for us right now is to provide a desktop without the encryption software.  I'm just wondering if this is related to us, or if there is any supporting documentation out there? 
    Any help is apprecicated.

    CAD for IPCCX v4 does not support windows 7. See compatibility matrix:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
    In my experience if you already have CAD installed and you upgrade the OS (without a fresh rebuild) CAD will work - but it is NOT supported. You should test this though.
    You will not be able to install the older version of CAD on windows 7, the installer will give you errors.
    Brian
    please rate helpful posts

  • Supervisor Desktop Agent View

    Hi,
    I'm currently running UCCX 8 and have strange issue in Supervisor Desktop with the name display for one of the agents!
    For all the other agents the information keyed into end user (on CUCM8) for the last name, first name fields is showing correctly in desktop. However i have one agent where it is showing a completely different name to what is entered in the end user entry!
    Has anyone any ideas as to where else it could be pulling this information from or why it is displaying incorrecly for one agent yet the other 30 are correct?!
    Thanks

    The other thing to do is to download a free ldap browser (almost everyone uses the same one - version 2.8.2 of Jarek Gawor's application) and connect to the Calabrio LDAP - use port = 38983 and set the BASEDN to  o=Spanlink Communications. It will look like this for an anonymous connection:
    Have a browse through the LDAP until you find your agent. Check what is there - this is the source, and sync will just populate the source from the SQL database. This may shed some light on the problem - why it is not being updated to match the SQL DB.
    For anyone who plays with CAD at a big site, the LDAP browser is essential.
    Regards,
    Geoff

  • Agent and Supervisor Desktop is in Partial service

    Hi,
    My CAD and CSD shows the status in the bottom as Partial service,when i analyse the service status by clicking on that " Agent Statistics Viewing is Inactive ". What i need to do to enable it.My environment is CME 7.0 , UCCX 7.0 with IP Communicator.
    Thanks,
    Hari

    Hey Jasper,
    Please do the following and attach the log for my review.
    On the agent desktop, go to c:\program files\cisco\desktop\config
    Open agent.cfg in notepad
    Configure Threshold=OFF to Threshold=DEBUG
    Close any version of agent desktop that's open on the computer, and relogin in. Once you are logged in and see partical service...  close the agent desktop program.
    Please attach the log file for that time period to this post.  The log file is lcoated in
    c:\Program Files\Cisco\Desktop\log
    Please confirm you are able to login and pull historical reports for the last 24 hours as well.
    Is this an HA setup for single server?

  • Agent and Supervisor Desktop Updates

    With version 7.x of UCCX, if we did an update to our UCCX server, the updated agent and supervisor desktops downloaded automatically the next time a user logged on.
    Last night I updated our 8.5.1 server to the latest build.  I went to run the agent and supervisor and it just gave me a message that I had to install the latest version.  It doesnt appear to auto update.  Is there a way to make that work.

    Hi John,
    Did you run the "Cisco Unified CCX Client Configuration tool " after upgrading your UCCX system. If not please run it and relaunch the CAD or CSD, they will get automatically get upgraded.
    Hope this helps.
    Anand
    Please rate helpful posts !!

  • UCCX numbers off on Agent desktop and CTIOS supervisor desktop

    Hello,
    We have a big problem with the numbers displaying on are agent desktops as well as as the CTIOS supervisor desktops the numbers are off, such as the number of call recieved at the end of the day, etc.  It seems like at certain times of the day the numbers reset back to zero and the number of calls received by an agent through the whole day are smaller than they should.  Can you please help us.
    Thanks.

    Thanks. So you are looking at real-time reports.
    1. Is this an issue with all agents or only few ?
    2. What OS they are running ?
    3. Try installing CAD on Win XP or Win 7 32-bit to see if the behavior is same ? I wouldnt recommend reinstalling CAD on their existing boxes, as few registry settings might not be removed completely & will show the same behavior. Therefore, grab a new machine with above mentioned OS & do a fresh install on it to see if it helps.
    4. Were there any OS patch upgrades taken place recently on agent machines ?
    GP.

  • UCCX Supervisor Desktop Agent team summary

          Supervisor desktop agent team summary report are not showing accurate.  Before restart the server we are facing a Agent logon time its not correct under the supervisor desktop agent page.
    After restart that problem is resolved the Agent logon time but its giving another issue.
    The issue the Call Preseneted time not accurate.
    The running UCCX version is: 8.5.1.11004.25
    Attached the snapshot.

    What's wrong with the calls presented column? It looks like three of the four people didn't answer one of the calls presented to them which is what that column is supposed to show.

  • Supervisor Desktop, Agents window is very jittery on certain queues

    We have Supervisor Desktop installed on Windows 7.
    On all of the Supervisors, the Agents window in the lower left hand is so jittery (very fast), you cannot make out who the agents are.
    We have two queues and it only happens when a particular queue is selected.
    We have two version of the software and it happens on both of them.
    8.02.400
    8.02.9
    I took some snapshots during the jitter and it looks like one of the agents (also a supervisor) is going away, and another agent is showing up twice.
    This happens so fast you can't see it, it just looks like all of the agents are kind of a blur.
    Has anyone ever seen anything like this?

    Might be a problem with a client firewall on the disappearing agent/sup.. that can disrupt comms so the agent logs in/loses connection/logs in etc ad infinitum.
    Check for Windows Firewall or any third party sutff and turn it off.
    Also check the desktop chat service logs on the UCCX server to see if there are lots of errors for any particular agent.
    Aaron HarrisonPrincipal Engineer at Logicalis UK
    Please rate helpful posts...

  • Cisco Supervisor Desktop show "Agent Logs - call" and "Agent Logs - state" in N/A ::: UCCX 8.5.1

    Hi team.
    The Cisco Supervisor Desktop don't show any logs in the "Agent Logs - State" and "Agent Logs - Call" in some agents.
    I restarted the Cisco Desktop Services in CCX Serviceability but the issue continue.
    I appreciate any help respect this case.
    Thanks a lot.
    ErnestoG

    Hi Ernesto,
    Did you click or selct the Specific Agent\Inbound call which is currently being handled by the Agent. From the Screenshot you have attached (first one) doesn't look like the call has been selected.
    Please select or click on that Specific Agent\Inbound call from CSD and check these values.
    Hope this helps.
    Anand
    Please rate helpful posts !!

  • Cisco Agents not Displaying on Supervisor Desktop

    2 Cisco agents were not displaying on the Supervisor Desktop, but were able to take calls. The agents were correctly configured in the UCCX. Logging off and back on did not correct the problem. The agents restarted their computers to resolve the problem. Any idea what could have caused this? Thanks

    Community Feedback Forum is a "Please do not post content other than feedback regarding the Cisco Support Community experience within this community." community.
    Moved to Contact Center

  • No Service on Agent Desktop and Supervisor Desktop

    This issue was brought to our attention because the Supervisors logging into Supervisor Desktop are unable to see their agents in the team list.
    The Agent Desktop window aswell as the Supervisor Desktop show "No service" at the bottom, this is the same for all agents and supervisors on the contact centres for this particular IPCC Express cluster.
    But calls are still routing through fine, the only actual issue seems to be supervisors not being able to monitor their agents.
    All services are up and the servers appear to be operating normally.

    Yes, I can confirm that we did end up restarting our service with no call drops (I realise now that once a call has been answered, it is no longer using the CCX port and, therefore, won't drop).
    Per my post here: https://supportforums.cisco.com/thread/2081178
    ll.... I restarted the "Cisco Desktop Call/Chat Service" service in  CCX Serviceability > Tools > Control Center - Network Services.
    The service was only restarted on the Publisher (we have pub + subscriber in HAoWAN config).
    Once  the service had restarted - the publisher remained 'master' of the  service. I didn't bother to restart the sub's service at any stage.
    The service restart took about 1 literal minute total - from clicking 'restart' to cycle back to IN SERVICE.
    As part of the process, I had called into one of our contact center numbers and had an SDA take my call.
    I restarted the service while on the phone to them - they didn't get booted from CAD and the call didn't drop.
    Also  of note - another call was made into the system during the service  restart and another SDA on shift was able to take the call with no signs  of impact.
    CAD/CSD chat and also the team views in CSD started working again...issue solved.
    In  turn, agents and supervisors logged out of CAD/CSD, closed the app,  then re-opened it just in case (although I honestly don't think this was  necessary).
    I  have yet to find anything online that says specifically what this  service does (or any of the services in Network Services) in parts and  as a whole.
    I can only say that it is important in allowing Chat (clearly) and for Supervisor Desktop to be able to function at all really.
    We  didn't seem to experience any outage of any kind - so I will assume  that the consequences of service restart in this instance were little to  none.
    I couldn't say what the consequences would've been had the service failed to restart again - forcing a system bounce (yuck).
    Anyway - issue solved, hope this info proves useful to someone else!
    PS. If you're new to the whole UCCX business, CSD = "Cisco Supervisor Desktop" and CAD = "Cisco Agent Desktop".
    Also some additional interesting info per David King:
    "...here is the link to the  CAD install guide that I quoted regarding what the call/chat service  does. It also explains the other Desktop services as well. The service  descriptions start on page 11.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/installation/guide/cad80ccxig-cm.pdf
    Hope this helps.

Maybe you are looking for

  • Problem in loading metadata resources in 10.1.2 for developer

    when the process invokes the mail service: <invoke name="sendEMail" partnerLink="mailServicePL" portType="mail:MailService" operation="sendMessage" inputVariable="mailMSG"/> the bpel reports the following error <sendMessageFault xmlns="http://service

  • How to best add VoiceOver accessibility for children's graphic books?

    iBooks Author seems fairly intuitive for the most part with the exception of adding accessibility (VoiceOver) for children's graphic books. My story is written as a rhyme and prefer the story to be heard as initial (or primary) VoiceOver after each p

  • Installing Mavericks to external HDD, can I have more than one Partition?

    Hi, I am about to install Mavericks on an external SSD drive, which I shall be using instead of the internal HDD. My question is do I have to format the SSD with one partition, or can I use 2 or 3 ? Thanks

  • Load balancing connections in 3.7

    Hi, in our current setup we use read-write and read-only proxies. With 3.7 a client that is supposed to connect to a read-only proxy can be redirected to a read-write proxy (and a read-write to a read-only). Is there a way to partition proxies for lo

  • How to get rid of genieo search on safari?

    I have genieo virus on my laptop, macbook air OS X 10.9.2. As soon as I enter a name in the safari address bar, I have genieo search appearing. I've read lots of things and tried many solutions but nothing works and it's terribly irritating. My defau