CTI OS Toolkit issue after patching CTI OS 7.5.8

Hi all,
We are setting up the UCCE 7.5.1, and we have patched the system with ICM 7.5.8 and CTI OS
7.5.8. We have also patched the agents' PC with CTI OS 7.5.8.
Our developer has actually customized the CTI OS Toolkit softphone, to intergrate it with
a 3rd party application. It was running fine before patching the agents' PC with CTI OS
7.5.8. The customized CTI OS Toolkit could start up after the agents' PCs were patched.
When I tried to uninstalled CTI OS 7.5.8 from the PCs, then it works fine again. What
could be the problem here? Are there any additional steps that I need to take note after
patching CTI OS 7.5.8?
I also noticed that after running the software patch, the CTI OS Softphone would be
replaced.
Appreciate any help and advice on this.
Thanks & Regards,
Eric

The client patches are meant to be applied to the out of the box software. How is the patch supposed to know how to update your custom software? If you are trying to apply the patch onto a customized desktop then you are overwriting or breaking that customization. Your developer needs to apply the new software release to his custom code and provide a patch for you. The previous release remains backwards compatible so there's no rush.

Similar Messages

  • ALV table issue after patching.

    Hi Experts.
    In our applications, there is a button. On click of that button an ALV list will be displayed in the POP-UP.
    First time when we click the button this works fine. After that the ALV list does not get displayed in the POU-UP.
    Every time we have to re login and do the process.
    Note: This is happening only after patching.
    Thanks.

    Hi i have attached the piece of code. This code is written in DOINIT Method of the view in which the ALV is embedded. Everytime the table lt_locations will have the data which needs to be displayed in the ALV. The ALV gets displayed only first time and next time if we click the button, the ALV list is not displayed.
    DATA lo_nd_srlocations TYPE REF TO if_wd_context_node.
    DATA lo_el_srlocations TYPE REF TO if_wd_context_element.
      DATA ls_srlocations    TYPE wd_this->element_srlocations.
      DATA it_srlocations    TYPE wd_this->elements_srlocations.
      DATA lt_srlocations    TYPE STANDARD TABLE OF zxr_locations.
      navigate from <CONTEXT> to <SRLOCATIONS> via lead selection
      lo_nd_srlocations = wd_context->get_child_node( name = wd_this->wdctx_srlocations ).
      get element via lead selection
    lo_el_srlocations = lo_nd_srlocations->get_element(  ).
    SELECT  * FROM zxr_locations INTO TABLE lt_srlocations.
      DATA lo_nd_locations TYPE REF TO if_wd_context_node.
    DATA lo_el_locations TYPE REF TO if_wd_context_element.
    DATA ls_locations TYPE wd_this->element_locations.
        DATA lt_locations TYPE wd_this->elements_locations.
    navigate from <CONTEXT> to <LOCATIONS> via lead selection
      lo_nd_locations = wd_context->get_child_node( name = wd_this->wdctx_locations ).
    get all declared attributes
      lo_nd_locations->get_static_attributes_table(
        IMPORTING
          table = lt_locations ).
    lo_nd_srlocations->bind_table( lt_locations ).
    lo_nd_srlocations->bind_table( lt_srlocations ).
      DATA lo_cmp_usage TYPE REF TO if_wd_component_usage.
      lo_cmp_usage =   wd_this->wd_cpuse_alv_srlocations( ).
      IF lo_cmp_usage->has_active_component( ) IS INITIAL.
        lo_cmp_usage->create_component( ).
      ENDIF.
      DATA lo_interfacecontroller TYPE REF TO iwci_salv_wd_table .
      lo_interfacecontroller =   wd_this->wd_cpifc_alv_srlocations( ).
      DATA lo_value TYPE REF TO cl_salv_wd_config_table.
      lo_value = lo_interfacecontroller->get_model(
    data lr_column_settings type REF TO if_salv_wd_column_settings.
    *data lr_table_settings type ref to if_salv_wd_table_settings.
    lr_column_settings ?= lo_value.
    *lr_table_settings ?= lo_value.
    lr_column_settings->delete_column( 'MANDT' ).

  • Issue after patching after SQL instance with SP3

    Hi All,
    I have recently patched one of 2008 SQL instance in my environment with SP3 and after applying the patch I can see that the version got changed to 10.0.5500, but when checked summary logs I'm seeing below message. Could some one please let me know what are
    the steps to be followed to get this issues fixed.
    I have checked few things from my end and was able to see that uninstalling the sp3 which is applied should fix this and roll it  back to its previous version which was sp2, but what I'm concerned is the missing .msi file. How can i fix this missing
    msi file thing?
    Error Message logged in summary.txt file
    Overall summary:
      Final result:                  The patch installer has failed to update the shared features. To determine the reason for failure, review the log files.
      Exit code (Decimal):           -2068709373
      Exit facility code:            1202
      Exit error code:               3
      Exit message:                  The cached patch file "C:\Windows\Installer\6c1c7e81.msp" is missing. The original file for this cached file
    is
    "sql_engine_core_inst.msp", which can be installed from "Service Pack 3 for SQL Server 2008 (KB2546951) (64-bit)", version 10.3.5500.0.  For more information about how
    to resolve this problem, see “Steps to resolve missing media issue with SQL Server 2008” (http://go.microsoft.com/fwlink/?LinkId=144387) in the Microsoft Knowledge
    Base.
      Start time:                    2015-03-21 12:31:47
      End time:                      2015-03-21 12:32:39
      Requested action:              Patch
    Thanks in Advance, Kranthi

    Hi All,
    Got the fix for this issue from the below video which is very much in detail.
    http://blogs.msdn.com/b/sqlserverfaq/archive/2012/05/08/missing-msi-s-msp-s-error-during-sql-server-patching.aspx

  • Digitial Signature issues after patching Acrobat 9.5 to 9.5.1.

    After installing the security patch on Acrobat 9.5 Digital signing is not working correctly.  Users are getting error - Bad Format.  Machine that was not patched works fine with a imported digital signature.  Is there a fix for this problem. 

    While that is a good answer to my question; it is not a good solution to my situation since it is a corporate license that has to be reinstalled by our IT department. That is a very cumbersome process and puts me, as an end-user testing this new product, in a poor situation and effectively shuts down my production for an unspecified time frame when the trial expires.

  • Solaris 10 on Intel DP35DP with E-SATA issue after patching

    My trusty Intel DP35DP, sata controller set to to AHCI, has 5 sata and 1 E-SATA port.
    I've ignored it for a while, meaning haven't patched it. It currently has a Sata rpool
    disk and a second Sata disk for data. While doing some cleanup, I attached an external
    E-SATA 2TB disk, carved off 200G and added another zpool. worked great.
    I was looking forwarded to patching, so setup a new BE, patched it, activated it
    and booted it. Solaris griped that it couldn't find the E-SATA disk. Rolled back to
    the previous BE. tweaked a few things in the new patched env, no go. roll back
    again.
    The kernel patch the E-SATA is working on is 141445-09. pca reports I need
    to apply 142910-17 and 144489-09. When I boot to that environment, I can
    no longer see or enumerate the E-SATA disk?
    Ideas?

    My trusty Intel DP35DP, sata controller set to to AHCI, has 5 sata and 1 E-SATA port.
    I've ignored it for a while, meaning haven't patched it. It currently has a Sata rpool
    disk and a second Sata disk for data. While doing some cleanup, I attached an external
    E-SATA 2TB disk, carved off 200G and added another zpool. worked great.
    I was looking forwarded to patching, so setup a new BE, patched it, activated it
    and booted it. Solaris griped that it couldn't find the E-SATA disk. Rolled back to
    the previous BE. tweaked a few things in the new patched env, no go. roll back
    again.
    The kernel patch the E-SATA is working on is 141445-09. pca reports I need
    to apply 142910-17 and 144489-09. When I boot to that environment, I can
    no longer see or enumerate the E-SATA disk?
    Ideas?

  • All adapter issue after patch XI SP16

    Hi,
    I did patch the following by SDM from SP15 -> SP16
    SAPBASIS16_0
    SAPXIAF16P_2
    SAPXIAFC16P_5
    SAPXICONS16_0
    SAPXIPCK16_0
    SAPXITOOL16P_3
    and when i get to adapter monitoring(http://sapxid:50000/mdt/amtServlet) , i can not see all of adapter only except for JPR.
    and actually adapters are not running
    visual administrator, i can see XI all of Adapters started
    does anyone know?

    Hi,
    just have a look at question 3 (adapters section)
    on the XI FAQ page and this will solve your problem
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

  • Roles issue after patched PCK SP14

    I udpated pck from sp9 to sp14, now I want to Assign roles in Security Provider, but function is disabled, How to enable it? I installed successfully last time. but at that time, sap team in my company installed both a ABAP system and java system. they can assign the role using a gui tool without using visual admin. now the system is all java -based. it must use visual admin to assign roles. but how to do it? who help me?
    Message was edited by: Spring Tang

    it is so easy, but i ignore it:), there is a toolbar button on the upper side, click it to change the state to Midify state

  • CTI OS Toolkit - Buttons are disable when transfer the call

    Hello guys, i've been in a bad situation and i don´t know how to resolve the problem.
    Here where I work, I installed the CTI Toolkit, but when a agent try to transfer the call to another agent, the toolkit disable all the functions, but it still on, the agent still logged,receive others call, but he can't do anything, because all the buttons are disabled.
    I found a workaround, when occour this, i reset the IP Cisco 7960 Hardphone, so I logged out the agent and logged in again.
    I collect the cti server log, cti os log and the pg log, and I found something, but i don't know how to resolve this problem. Here is a little part of the logs, but I have all the logs completely here, if you want.
    Here is the problem: "The agent Simone Minelli (Id: 5012, ext: 2215)  reported that days 17.09.2010 at 10:25 until 10:26, the CTI OS toolkit  lost
    their task and got the buttons disabled, thereafter transfer  the call to the agent Laryssa Oliveira (ID: 5096, ext: 2202)".
    In appended, i fixed the cti os log, cti server log and the pg log. Thanks everybody!!
    Here is only the cti os log, but fixed there are others:
    10:25:32 CTIOS1-ctios Trace: [agent.5000.5012] AGENT_STATE_EVENT ( eTalking ) [CtiosBaseAgentObject,
         T_BASE_AGENT_AGENT_STATE_EVENT, 89501]
    10:25:32 CTIOS1-ctios Trace: [call.5000.17056904] RTP_STARTED_EVENT [CtiosBaseCallObject,
         T_BASE_CALL_RTP_STARTED_EVENT, 40001]
    10:25:44 CTIOS1-ctios Trace: ClientMgr[1]::OnConnectionClosed, Client[0x40754a0][01211]
    10:26:29 CTIOS1-ctios Trace: [call.5000.17056970] CALL_FAILED_EVENT [CtiosBaseCallObject,
         T_BASE_CALL_CALL_FAILED_EVENT, 2751]
    10:26:52 CTIOS1-ctios Trace: [call.5000.17056904] CALL_CONNECTION_CLEARED_EVENT [CtiosBaseCallObject,
         T_BASE_CALL_CALL_CONNECTION_CLEARED_EVENT, 39001]
    10:27:24 CTIOS1-ctios Trace: [skillgroup.5000.40] QUERY_SKILL_GROUP_STATISTICS_REQ
         [CtiosBaseSkillGroupObject, T_BASE_SKILL_QUERY_SKILL_GROUP_STATISTICS_REQ,
         788751]
    10:27:24 CTIOS1-ctios Trace: [skillgroup.5000.40] QUERY_SKILL_GROUP_STATISTICS_CONF
         [CtiosBaseSkillGroupObject, T_BASE_SKILL_QUERY_SKILL_GROUP_STATISTICS_CONF,
         788751]
    10:27:51 CTIOS1-ctios Trace: [agent.5000.5012]::DisableSkillGroupStatisticsReq()- Empty skill group number
         list provided.[CtiosBaseAgentObject,
         T_BASE_AGENT_DISABLE_EMPTY_SKILLGROUP_LIST, 985]
    10:27:51 CTIOS1-ctios Trace: [agent.5000.5012]::DisableSkillGroupStatisticsReq()- Empty skill group number
         list provided.[CtiosBaseAgentObject,
         T_BASE_AGENT_DISABLE_EMPTY_SKILLGROUP_LIST, 986]
    10:27:51 CTIOS1-ctios Trace: ClientMgr[1]::OnConnectionClosed, Client[0xf841a8][SILVMIN1-VM-2872-2796]
    10:29:41 CTIOS1-ctios Trace: [skillgroup.5000.35] QUERY_SKILL_GROUP_STATISTICS_REQ
         [CtiosBaseSkillGroupObject, T_BASE_SKILL_QUERY_SKILL_GROUP_STATISTICS_REQ,
         789001]
    10:29:41 CTIOS1-ctios Trace: [skillgroup.5000.38] QUERY_SKILL_GROUP_STATISTICS_CONF
         [CtiosBaseSkillGroupObject, T_BASE_SKILL_QUERY_SKILL_GROUP_STATISTICS_CONF,
         789001]
    10:30:03 CTIOS1-ctios Trace: [call.5000.17057099] CALL_DATA_UPDATE_EVENT [CtiosBaseCallObject,
         T_BASE_CALL_CALL_DATA_UPDATE_EVENT, 37001]
    10:30:39 CTIOS1-ctios Trace: [agent.5000.5056] AGENT_STATE_EVENT ( eAvailable ) [CtiosBaseAgentObject,
         T_BASE_AGENT_AGENT_STATE_EVENT, 89751]
    10:30:49 CTIOS1-ctios Trace: ClientMgr[1]::OnConnectionClosed, Client[0x40754a0][01213]
    10:30:56 CTIOS1-ctios Trace: [agent.5000.5012] QUERY_AGENT_STATE_REQ [CtiosBaseAgentObject,
         T_BASE_AGENT_QUERY_AGENT_STATE_REQ, 1501]
    10:30:56 CTIOS1-ctios Trace: [agent.5000.5012] QUERY_AGENT_STATE_CONF ( eLogout ) [CtiosBaseAgentObject,
         T_BASE_AGENT_QUERY_AGENT_STATE_CONF, 1501]
    Thanks!

    Is this with the out of the box CTIOS desktop?  Any customization?
    david

  • Repository connect issue after MDM Patch Upgrade

    MDM Expert
    We recently upgraded our MDM patch from SP06 5.5.63.73 to SP06 5.5.65.91
    after patch upgrade we are not able to connect to repository.SAP is saying that we have wong NLS Character set.It should be 'UTF8' or 'AL32UTF8'
    We checked and found that we do not have character set as per SAP Recommendation but everything was working fine before upgrading the patch.As per SAP in new Patch MDM is lokking for Unicode Character set
    SAP is asking to create new DB Instance for MDM.
    If we create new instance for MDM then how we are going to use our existing repository.Our environment is clustered environment and name of MDM DB instance is also mentioned in cluster.We have to use same Instance name.We are also using oracle failsafe
    Creating new instance seems to be risky for Production environment.Currently we are applying the Patch in Sandbox Environment
    has anyone of you faced this problem while upgrading MDM patch, if yes then how you resolve the issue
    Please help
    Thanks
    Deelip

    Solution provided by sAP

  • Issues after Upgrade from Oracle 10.1.0.5 to 10.2.0.5 in Windows Server2003

    Good Morning Good People,
    I have run in to some issues after upgrading my 10.1.0.5 database to 10.2.0.5. Initially after the firtst upgrade from 10.1.0.5 to 10.2.0.0 one has to run Critical Patch set 4 to get to 10.2.0.5. Well after initial up grade everything worked fine. I could connect to the database from within the server as well as remotely through SQL*PLUS client. However, after completeing the patch I'm still able to connect to the database from within the server, but remotely i get the following error:
    ORA-12514 : TNS Listener does not currently know of service requested in connect descriptor.
    I also get Error ORA-12505: TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: (description=(address=(host=mcquery2)(protocol=tcp)(port=1521))(connect_data=(sid=mcquery)(server=dedicated)))
    I've tried serval different things to trouble shoot the issue but nothing seems to work.
    If anyone has run into s similar issue please help. This is ruining my weekend! LOL!
    Edited by: user10835577 on Aug 29, 2010 9:15 AM

    From the client or the server?
    SERVER:
    tnsnames.ora:
    MCQUERY=
    (DESCRIPTION=
    (ADDRESS=
    (PROTOCOL=TCP)
    (HOST=10.36.27.184)
    (PORT=1521)
    (CONNECT_DATA=
    (SERVICE_NAME=MCQUERY)
    listener.ora
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
    FROM REMOTE SQLPLUS Client:
    tnsnames.ora
    MCQUERY=
    (DESCRIPTION=
    (ADDRESS=
    (PROTOCOL=TCP)
    (HOST=10.36.27.184)
    (PORT=1521)
    (CONNECT_DATA=
    (SERVICE_NAME=MCQUERY)
    listener.ora
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = D:\oracle\product\10.1.0\Client_3)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = cotsdot370.cotsdot.dom)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
    Thanks,
    Malcolm
    Edited by: user10835577 on Aug 29, 2010 12:01 PM

  • Startup after patching (9654983) ORA-32004

    I patched a nearly identical system before this one with no issues however after patching this one
    on attempting to startup I get :
    ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance.
    ORA-24324: service handle not initialized
    ORA-24323: value not allowed
    ORA-01092: ORACLE instance terminated. Disconnection forced.
    What gives?
    Thanks for any and all help in advance,
    Brian

    ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance.
    ORA-24324: service handle not initialized
    ORA-24323: value not allowed
    ORA-01092: ORACLE instance terminated. Disconnection forced.
    What gives? Check the alert.log to identify the obsolete parameter and remove it.
    OR
    Check V$OBSOLETE_PARAMETER to see the matching on and remove it.
    Then,startup the database.
    -Anantha

  • Performance Issues after an Upgrade

    Hello!
    We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
    1) What could be the causes/factors for the performance to degrade after an upgrade?
    2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
    3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
    Please let me know your thoughts on this.
    Thanks,
    - Krrish

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • After patching Portal 7.31 SP9 - SP13, CM BW reports fail

    Our links to the BI credit reports (like Early Warning Risk) stopped working after patching the NW Portal 7.31 from SP9 to SP13.  No other changes were made, and the reports worked prior to the patching. 
    The child window for the report opens, but then comes back with error:
    com.sap.portal.appintegrator.sap.BWReport::BWReport/AskForReport
    And then it asks for a BEx Web Application Query String.
    I would put this in the portal/netweaver forum, but this error seems strictly related to the CM delivered content (we are on the most current 1.41 BP).   We've validated that that the SSO tickets from portal to back end ERP and BI are working properly.  Has anyone had this kind of issue after a patch (while staying on same portal release)?  We didn't make any changes/patches to the back end ERP and BI systems either.

    Yes we have experienced the same thing.  We upgraded from 30 to 353 and now we are getting the BW logon prompt.  It is very frustrating. I have been searching these message boards for help.
    Brien

  • SSRS Report Viewer display issues after KB2888505 and now KB2898785

    After patch KB2888505 both IE 9 and IE 10 started displaying cropped images with horizontal scroll bars when viewing SSRS Reports.  These reports functioned and fit the screen without scroll bars prior to this patch and returns
    to normal once the patch is uninstalled.  There is no compatibility mode icon in the address bar and I have tried all browser modes in the F12 Developer Tools Menu with no change.  Rolling back KB2888505 was a temp fix for my
    users until KB2898785 was installed reverting back to the same cropped reports with the scroll bar.  The only versions of IE in my environment are 9 and 10 and upgrading to 11 is not an option at this time.  Others have reported this same issue so
    maybe we can get more visibility on TechNet.    

    Hi,
    These two KB include too many Individual updates. It's hard to figure out which exact update lead to this issue.
    If you make sure the issue is caused by these updates package. The simple and easier way is to uninstall them.
    Karen Hu
    TechNet Community Support

  • Non priviledged commands fail after patch cluster install

    For several years, to allow users to access system functions for higher clock resolutions in their
    applications, we have made the following mods to two files (per Sun recommendations):
    In the /etc/system file, add lines:
    * 10 ms clock resolution*
    set higher_tick = 1*
    In /etc/user_attr, add:
    dssuser::::type=normal;defaultpriv=proc_clock_highres,file_link_any,proc_info,proc_session,proc_fork,proc_exec
    Everything was fine until I installed the latest patch cluster (from 2-14-2011) on our Netra 210. No issues installing the cluster. Upon reboot, the dssuser cannot do some simple things, like use ftp or ping. Messages like this:
    ping: unknown host
    ftp: socket: Permission denied.
    The root user has no problems using any of these commands. As soon as I comment out the dssuser line from the /etc/user_attr file, everything works as expected. But we need the highres clock settings for our applications. I am unfamiliar with the workings and intent of the entries in user_attr so any help would be most appreciated.
    Mark

    The problem is that after patch implementation, the special privileges for any user defined in the /etc/user_attr file were modified to append the string "!net_privaddr" specifically denying use of common commands ping and ftp for example. The output of ppriv:
    $ ppriv $$
    14870: -sh
    flags = <none>
    E: basic,proc_clock_highres,!net_privaddr
    I: basic,proc_clock_highres,!net_privaddr
    P: basic,proc_clock_highres,!net_privaddr
    L: all
    I had to add the keyword net_privaddr in the user_attr file like:
    dssuser::::type=normal;defaultpriv=proc_clock_highres,file_link_any,proc_info,proc_session,proc_fork,proc_exec,net_privaddr
    to get past this problem. A bug or what?

Maybe you are looking for