CTM 8.5 install
I'm trying to install CTM 8.5 on an HP Proliant DL-360 G4 with Solaris 10. Nothing else has been installed besides Solaris. I cannot seem to even get Oracle installed let alone CTM 8.5 is there an install for dummies guide?
Hi Chris,
Please noted that the specification said:
Sun Solaris 10, release 11/06, on a Sun SPARC-based server
T2 processor on Sun Solaris 10, release 5/08
T2 processor is also SPARC, where SPARC is not Intel (x86) processor, it is a RISC processor(http://www.sun.com/processors/UltraSPARC-T2/).
HP servers (DL) are using Intel processor, AKA x86.
Also, Solaris supports two platforms, x86, and SPARC (http://www.sun.com/software/solaris/specs.jsp). Please take a look at the platform section.
HTH,
jerry
Similar Messages
-
CTM run ends up system exception error message
Hi
After starting "planning run" from CTM profile i'm getting the error message: "Destination address and application CTM were not found in Customizing as an active entry".
There was thread already with same issue, but it was closed without proper answer.
CTM run ends up with error message
Could someone please offer any advice on what can be done here.
Thanks
VenkateshHi Venkatesh,
Please check in your CTM settings if the CTM is correctly installed.
For this you can take help from Basis or got to TX-SM59 -> TCP/IP connections and there you will see your Optimizer server , test the connection once.
Let me know if this helps.
Regards,
Jatin -
Unable to install CTM Client on a WIN 7 64 Bit machine
We recently U/g a 64bit machine to Windows 7 and now we are unable to install the CTM Client. The error we get says unable to install due to machine configuration. Is there an update to the CTM Client we need. we are running 8.5.
Hi, Looks like Windows7 is not supported for CTM 8.5. http://www.cisco.com/en/US/docs/net_mgmt/cisco_transport_manager/8.5/installation/guide/85sysreq.html#wp1072916 CTM supports Window7 32
-
OSD task sequence fails to install application on workgroup computers
Environment:
Windows Server 2008 R2 Standard, SP1
SCCM 2012 R2
Issue:
OSD TS fails to install applications from local DP on Windows 8.1 x86 workgroup computers. Same applications install fine from OSD/TS on domain computers. A standard push installs fine when deployed outside of OSD/TS to workgroup, or domain computer.
- “SMSMP=managementpoint.domain.com” is included in ‘Setup Windows and ConfigMgr’ installation poperties
- “Allow clients to connect anonymously” enable on DP system role, HTTP client communication
- Network Access Account is configured and authentication is confirmed
- Have confirmed no overlapping boundaries
- IIS anonomys and Windows authentication is enabled for SMS_DP_SMSPKG$, anon authentication creds set to "Specific user: IUSR"
After OSD deployment to workgroup computer completes -
AppEnforce.log is missing
smsts.log
App install failed.
Setting TSEnv variable '_TSAppInstallStatus'='Error'
Setting TSEnv variable 'SMSTSInstallApplicationJobID__ScopeId_93E0532F-C5CA-4078-AE13-2BF543602863/Application_486d99ca-817a-4600-889e-50f8e4f91592'=''
Completed installation job.
Step 3 out of 3 complete
Install application action failed: 'Microsoft_Office_Professional_2013_v15.0.4420.1017_CA-copy'. Error Code 0x80004005
CITaskMgr.log
State transition to (Failure), Error(0x87d00222) : CITask(ScopeId_93E0532F-C5CA-4078-AE13-2BF543602863/DeploymentType_f7f47522-3654-43b0-95ef-55198d957bdf.8..Install.ContentDownload)
Initiating task ContentDownload for CI ScopeId_93E0532F-C5CA-4078-AE13-2BF543602863/DeploymentType_5982c24d-07f4-4121-8aa4-4f65a8b7aeb6.15 (Microsoft_Office_Professional_2013_v15.0.4420.1017_CA_x86_P_PW) for target: , consumer: {634F5894-5AB1-4D48-83F7-603E94FE1F3F}
Initiating content download : CITask(ScopeId_93E0532F-C5CA-4078-AE13-2BF543602863/DeploymentType_5982c24d-07f4-4121-8aa4-4f65a8b7aeb6.15..Install.ContentDownload)
State transition to (InProgress), Param(0) : CITask(ScopeId_93E0532F-C5CA-4078-AE13-2BF543602863/DeploymentType_5982c24d-07f4-4121-8aa4-4f65a8b7aeb6.15..Install.ContentDownload)
State transition to (InProgress), Param(0) : CTaskConsumer(ScopeId_93E0532F-C5CA-4078-AE13-2BF543602863/DeploymentType_5982c24d-07f4-4121-8aa4-4f65a8b7aeb6.15.{CC8A099F-8EC4-4484-9191-53FFC1775D18})
Successfully initiated contents download request {5237AC77-651A-4723-AF91-78A1C0497DBD} : CITask(ScopeId_93E0532F-C5CA-4078-AE13-2BF543602863/DeploymentType_5982c24d-07f4-4121-8aa4-4f65a8b7aeb6.15..Install.ContentDownload)
Release task ContentDownload for CI ScopeId_93E0532F-C5CA-4078-AE13-2BF543602863/DeploymentType_5982c24d-07f4-4121-8aa4-4f65a8b7aeb6.15 for target: , consumer {634F5894-5AB1-4D48-83F7-603E94FE1F3F}
Release task ContentDownload for CI ScopeId_93E0532F-C5CA-4078-AE13-2BF543602863/Application_486d99ca-817a-4600-889e-50f8e4f91592.22 for target: , consumer {502180D3-CA3B-4657-AD32-D43F952A6576}
Release task ContentDownload for CI ScopeId_93E0532F-C5CA-4078-AE13-2BF543602863/RequiredApplication_486d99ca-817a-4600-889e-50f8e4f91592.22 for target: , consumer {1A485BC4-DD0C-4659-B034-8D7F9B436B3A}
State transition to (Failure), Error(0x87d00222) : CITask(ScopeId_93E0532F-C5CA-4078-AE13-2BF543602863/DeploymentType_5982c24d-07f4-4121-8aa4-4f65a8b7aeb6.15..Install.ContentDownload)
ContentTransferManager.log
CTM job {1964A4E6-DC01-4A04-983D-AAFD5FB2CA5E} (corresponding DTS job {901A1D57-D363-45FE-A4F4-8509F5556D53}) started download from 'http://HOUMGMT49.APACHECORP.COM/SMS_DP_SMSPKG$/Content_ed232f49-224b-48cc-9c01-0ff31bae851e.1' for full content download.
CTM job {1964A4E6-DC01-4A04-983D-AAFD5FB2CA5E} entered phase CCM_DOWNLOADSTATUS_DOWNLOADING_DATA
CTM job {1964A4E6-DC01-4A04-983D-AAFD5FB2CA5E} entered phase CCM_DOWNLOADSTATUS_DOWNLOADING_DATA
CTM job {1964A4E6-DC01-4A04-983D-AAFD5FB2CA5E} entered phase CCM_DOWNLOADSTATUS_DOWNLOADING_DATA
CTM job {1964A4E6-DC01-4A04-983D-AAFD5FB2CA5E} entered phase CCM_DOWNLOADSTATUS_DOWNLOADING_DATA
CTM encountered error processing reply from DTS. Code 0x87d00215
Cancelled CTM job {1964A4E6-DC01-4A04-983D-AAFD5FB2CA5E}
Two workarounds below (Not acceptable solutions)
*I can add a pause script after Setup Windows and ConfigMgr sequence, wait 5-10 minutes and the applications will install. I assume this is because the CM client has time to fully provision.
* I can add the anon ‘IUSR’ account to the local administrators group on the DP and all applications install (without the pause script mentioned above). I can reproduce the issue repeatedly by removing and adding the anon account.
Any help with this would be greatly appreciated…
Also, I come from a CM 2007 background and somewhat new to CM 2012. Should WebDAV and/or URL Authorization be installed and configured on the DP? According to MS tech support “No”. However, I’ve seen several SCCM 2012 guides on the web that say it should
be installed.
Regards
David K. HarrisonLocationservices.log, CIDownloader.log, CIagent.log, DataTransferService.log also need to be checked. We need to find out what credential the Client trys to use when it downloads content from DP.
Juke Chou
TechNet Community Support -
Are you unable to install iTunes 10 on your windows 7 64 bit platform?
Ok, I was having the same issues and tried uninstalling all Apple software. When I tried to uninstall the Apple updater it gave me the same message about something missing. So I right clicked on it in the uninstall window and clicked repair instead. I installed iTunes again and had no issues.
Hope this helps!!Hi, Looks like Windows7 is not supported for CTM 8.5. http://www.cisco.com/en/US/docs/net_mgmt/cisco_transport_manager/8.5/installation/guide/85sysreq.html#wp1072916 CTM supports Window7 32
-
Hi
Is it possible install CTM 4.7 on solaris 9, release 5.9?
ThanksI think CTM 4.7 on Solaris 9 platform will not work. You could try upgrading the CTM to version 5 and then run it on Solaris 9,release 5.9
-
IE11 SCCM 2012 Deployment - says installed in software center but after re-boot IE8 Remains
Hello,
I have an issue deploying IE11 to the estate, on the pc's the package says installed in software centre but when the users re-boot it's still IE8 on the machine.
The monitoring tool in SCCM 2012 console lists the install as successful.
I have the appenforce log from one of the machiens with the issue:
Starting Install enforcement for App DT "Internet Explorer 11 - Windows Installer (*.msi file)" ApplicationDeliveryType - ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, Revision - 1, ContentPath
- C:\Windows\ccmcache\19, Execution Context - System AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
A user is logged on to the system. AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Performing detection of app deployment type Internet Explorer 11 - Windows Installer (*.msi file)(ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, revision 1) for system. AppEnforce 28/01/2015
12:30:53 6512 (0x1970)
+++ MSI application not discovered [MSI Product Code: {86DC0963-2A1C-42AB-B664-17C12DBF6C6D}, MSI Product version: ] AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
App enforcement environment:
Context: Machine
Command line: msiexec /i "IE11-Setup-Full.msi" /q
Allow user interaction: No
UI mode: 0
User token: null
Session Id: 4294967295
Content path: C:\Windows\ccmcache\19
Working directory: AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Prepared working directory: C:\Windows\ccmcache\19 AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Found executable file msiexec with complete path C:\Windows\system32\msiexec.exe AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Prepared command line: "C:\Windows\system32\msiexec.exe" /i "IE11-Setup-Full.msi" /q /qn AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Valid MSI Package path = C:\Windows\ccmcache\19\IE11-Setup-Full.msi AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Advertising MSI package [C:\Windows\ccmcache\19\IE11-Setup-Full.msi] to the system. AppEnforce 28/01/2015 12:30:53 6512 (0x1970)
Executing Command line: "C:\Windows\system32\msiexec.exe" /i "IE11-Setup-Full.msi" /q /qn with system context AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
Working directory C:\Windows\ccmcache\19 AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
Post install behavior is BasedOnExitCode AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
Waiting for process 7204 to finish. Timeout = 120 minutes. AppEnforce 28/01/2015 12:30:55 6512 (0x1970)
Process 7204 terminated with exitcode: 0 AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
Looking for exit code 0 in exit codes table... AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
Matched exit code 0 to a Success entry in exit codes table. AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
Performing detection of app deployment type Internet Explorer 11 - Windows Installer (*.msi file)(ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, revision 1) for system. AppEnforce 28/01/2015
12:31:05 6512 (0x1970)
+++ Discovered MSI application [AppDT Id: ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3, Revision: 1, MSI Product code: {86DC0963-2A1C-42AB-B664-17C12DBF6C6D}, MSI Product version: ] AppEnforce
28/01/2015 12:31:05 6512 (0x1970)
++++++ App enforcement completed (11 seconds) for App DT "Internet Explorer 11 - Windows Installer (*.msi file)" [ScopeId_F26B70A7-1D38-41D7-AF12-4D44AF3EDFED/DeploymentType_ee666887-31c1-4b60-837d-b7ce84e496c3], Revision:
1, User SID: ] ++++++ AppEnforce 28/01/2015 12:31:05 6512 (0x1970)
This is the CAS log:
Saved Content ID Mapping e9dea25d-d24d-4d5c-a767-52068338e976.1, C:\Windows\ccmcache\12 ContentAccess 28/01/2015 10:12:41 6884 (0x1AE4)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:12:57 9832 (0x2668)
Releasing content request {1738FD09-9D1F-4708-9266-A418E9EB049A} ContentAccess 28/01/2015 10:12:57 9832 (0x2668)
All references to Content 1a757176-8b61-4c70-b147-10cdbbfdd0b5.1 in cache have been removed. Content will be Tombstoned. ContentAccess 28/01/2015 10:12:57
9832 (0x2668)
Saved Content ID Mapping 1a757176-8b61-4c70-b147-10cdbbfdd0b5.1, C:\Windows\ccmcache\13 ContentAccess 28/01/2015 10:12:57 9832 (0x2668)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:13:10 8140 (0x1FCC)
Releasing content request {25035F86-891D-41D3-AD45-F845D8689F88} ContentAccess 28/01/2015 10:13:10 8140 (0x1FCC)
All references to Content cedf67fc-735e-4360-8db4-c8cb5d39663c.1 in cache have been removed. Content will be Tombstoned. ContentAccess 28/01/2015 10:13:10
8140 (0x1FCC)
Saved Content ID Mapping cedf67fc-735e-4360-8db4-c8cb5d39663c.1, C:\Windows\ccmcache\14 ContentAccess 28/01/2015 10:13:10 8140 (0x1FCC)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:14:12 14352 (0x3810)
Releasing content request {BB6AA813-A4F7-4095-B60D-4441E3D7833D} ContentAccess 28/01/2015 10:14:12 14352 (0x3810)
All references to Content 108336d1-2d2c-4d93-87b3-49d335640f2a.1 in cache have been removed. Content will be Tombstoned. ContentAccess 28/01/2015 10:14:12
14352 (0x3810)
Saved Content ID Mapping 108336d1-2d2c-4d93-87b3-49d335640f2a.1, C:\Windows\ccmcache\15 ContentAccess 28/01/2015 10:14:12 14352 (0x3810)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:14:30 13956 (0x3684)
Releasing content request {2CA9AC92-0716-49A7-86D4-434B88B4D07B} ContentAccess 28/01/2015 10:14:30 13956 (0x3684)
All references to Content 3fb07321-f1d1-4b71-90f1-233b355b13dd.1 in cache have been removed. Content will be Tombstoned. ContentAccess 28/01/2015 10:14:30
13956 (0x3684)
Saved Content ID Mapping 3fb07321-f1d1-4b71-90f1-233b355b13dd.1, C:\Windows\ccmcache\16 ContentAccess 28/01/2015 10:14:30 13956 (0x3684)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:15:53 10588 (0x295C)
Releasing content request {47EB54C8-54C9-4FF8-A302-53AF844FA275} ContentAccess 28/01/2015 10:15:53 10588 (0x295C)
All references to Content 9e56a46e-9a6a-42a5-b52b-811231a0ec2e.1 in cache have been removed. Content will be Tombstoned. ContentAccess 28/01/2015 10:15:53
10588 (0x295C)
Saved Content ID Mapping 9e56a46e-9a6a-42a5-b52b-811231a0ec2e.1, C:\Windows\ccmcache\17 ContentAccess 28/01/2015 10:15:53 10588 (0x295C)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 10:16:11 12040 (0x2F08)
Releasing content request {F230295F-5136-49C7-B1FF-68697DA4C421} ContentAccess 28/01/2015 10:16:11 12040 (0x2F08)
All references to Content 21ffbbb7-e491-48c1-b515-f5d6dc72f3fd.1 in cache have been removed. Content will be Tombstoned. ContentAccess 28/01/2015 10:16:11
12040 (0x2F08)
Saved Content ID Mapping 21ffbbb7-e491-48c1-b515-f5d6dc72f3fd.1, C:\Windows\ccmcache\18 ContentAccess 28/01/2015 10:16:11 12040 (0x2F08)
Requesting content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, size(KB) 98073, under context System with priority Medium ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
User policy requested with no user credentials. ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Invalid user. ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Submitted CTM job {7174344D-6757-429C-BA3D-A6FBE9A34DA7} to download Content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 under context System ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Successfully created download request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 12104 (0x2F48)
Location update from CTM for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 and request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download location found 0 - http://USS-LON-SCCMDP1.uss.co.uk/SMS_DP_SMSPKG$/Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download location found 1 - http://USS-LON-SCCMMAN.uss.co.uk/SMS_DP_SMSPKG$/Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download request only, ignoring location update ContentAccess 28/01/2015 12:30:30 5228 (0x146C)
Download started for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 ContentAccess 28/01/2015 12:30:30 12268 (0x2FEC)
Download completed for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 under context System ContentAccess 28/01/2015 12:30:52 5228 (0x146C)
Computed hash: F6BEAA17C60572A0751C74DACE26075CC2621CF72F23B09EFEEA4C928A3B0E54 ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Hash verification succeeded for content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 downloaded under context System ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Saved Content ID Mapping Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, C:\Windows\ccmcache\19 ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Download succeeded for download request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Error: DeleteDirectory:- Failed to delete Directory C:\Windows\ccmcache\19.BCWork with Error 0x00000002. ContentAccess 28/01/2015 12:30:53 5228 (0x146C)
Saved Content ID Mapping Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, C:\Windows\ccmcache\19 ContentAccess 28/01/2015 12:30:53 12104 (0x2F48)
SetCachedContentInUseFlag no change. Value : false ContentAccess 28/01/2015 12:31:05 10856 (0x2A68)
Releasing content request {5DA5E21D-BB3C-4534-964C-1862EB39F3C8} ContentAccess 28/01/2015 12:31:05 12104 (0x2F48)
All references to Content Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1 in cache have been removed. Content will be Tombstoned. ContentAccess 28/01/2015
12:31:05 12104 (0x2F48)
Saved Content ID Mapping Content_1e4c1d46-2dd0-4b10-ba32-44523c43a83d.1, C:\Windows\ccmcache\19 ContentAccess 28/01/2015 12:31:05 12104 (0x2F48)If the command-line you gave ConfigMgr runs successfully, there's not anything else ConfigMgr can do. Thus the logs above don't add any value. Thus, the issue lies with the MSI. Where did you get it from? Have you tried running it with the /l*v command-line
option to add verbose logging and then reviewed this log file? Have you tried manually testing using the System account (done using psexec) to more closely emulate how ConfigMgr invokes the command-line?
Jason | http://blog.configmgrftw.com | @jasonsandys -
Query for Software Updates Reports Install Date for only Some of the Installed Updates
We use the following query to retrieve a list of software updates for a specific collection and software update group. There are many cases where the installation status of a software update is 'installed' but there is no corresponding 'install
date'. Can anyone tell me why?
declare @AuthListLocalID as int
declare @CollID as varchar(8)
Select @CollID=CollectionID
from v_Collection
WHERE CollectionID='ZSV0000A'
select @AuthListLocalID=CI_ID from v_AuthListInfo
where CI_UniqueID='ScopeId_EAD5EB80-CC39-4EA2-B08F-A45BB84F1D76/AuthList_4DEAD110-5740-495E-8BD8-467A55C50A0C'
select
rs.Name0 as ServerName,
catinfo.CategoryInstanceName as Vendor,
catinfo2.CategoryInstanceName as UpdateClassification,
ui.BulletinID as BulletinID,
ui.ArticleID as ArticleID,
Case ui.Severity WHEN 10 THEN 'Critical' WHEN 8 THEN 'Important' ELSE LTRIM(ui.Severity) END as Rating,
ui.Title as Title,
Targeted=(case when ctm.ResourceID is not null then '*' else '' end),
Installed=(case when css.Status=3 then '*' else '' end),
IsRequired=(case when css.Status=2 then '*' else '' end),
Deadline=cdl.Deadline,
CAST(CASE IsNull(AddRem.InstallDate0,CAST('1/1/1900' as smalldatetime)) WHEN CAST('1/1/1900' as smalldatetime) THEN AddRem64.InstallDate0 ELSE AddRem.InstallDate0 END as Date) as 'Install Date',
ui.InfoURL as InformationURL
from v_UpdateComplianceStatus css
inner join v_UpdateInfo ui on ui.CI_ID=css.CI_ID
inner join v_CIRelation cir
on ui.CI_ID=css.CI_ID and cir.ToCIID = ui.CI_ID -- add this
inner join v_CICategories_All catall on catall.CI_ID=ui.CI_ID
inner join v_CategoryInfo catinfo on catall.CategoryInstance_UniqueID = catinfo.CategoryInstance_UniqueID and catinfo.CategoryTypeName='Company'
inner join v_CICategories_All catall2 on catall2.CI_ID=ui.CI_ID
inner join v_CategoryInfo catinfo2 on catall2.CategoryInstance_UniqueID = catinfo2.CategoryInstance_UniqueID
and catinfo2.CategoryTypeName='UpdateClassification'
left outer join v_CITargetedMachines ctm on ctm.CI_ID=css.CI_ID
and ctm.ResourceID = css.ResourceID
left outer join v_GS_ADD_REMOVE_PROGRAMS AddRem on css.ResourceID = AddRem.ResourceID and ui.Title = AddRem.DisplayName0
left outer join v_GS_ADD_REMOVE_PROGRAMS_64 AddRem64 on css.ResourceID = AddRem64.ResourceID and ui.Title = AddRem64.DisplayName0
left outer join (select atc.CI_ID
,CreationTime=min(a.CreationTime)
,ExpirationTime=min(a.ExpirationTime)
,StartTime=min(a.StartTime)
,EnforcementDeadLine=min(a.EnforcementDeadLine)
,LastModificationTime=min(a.LastModificationTime)
,Deadline=min(a.EnforcementDeadline)
from v_CIAssignment a
inner join v_CIAssignmentToCI atc on atc.AssignmentID=a.AssignmentID
group by atc.CI_ID) cdl
on cdl.CI_ID=css.CI_ID
left outer join v_R_System rs ON css.ResourceID=rs.ResourceID
where css.ResourceID in (
Select vc.ResourceID
FROM v_FullCollectionMembership vc
WHERE vc.CollectionID=@CollID)
and cir.FromCIID=@AuthListLocalID
and cir.RelationType=1
order by
catinfo.CategoryInstanceName
, catinfo2.CategoryInstanceName
, ui.ArticleIDHi Mate,
Its really difficult to do get the installed date of the patches as there is no table available in SCCM DB to pull this info i had a requirement in the past but i was unable to do had done it via work around.
This can be done after editing of sms_def.mof file or else using the power-shell script in windows server 2008 where the powershell is a feature by default.
H/W inventory:
For the 2000 servers this has to be installed but if we enable this its mentioned it may utilize upto 100 % of the Memory during the h/w inventory you can check that in your SMS_DEF.MOF -
QuickFixEngineering you can see the warning.uickFixEngineering
http://support.microsoft.com/kb/279225/en-us
Powershell script:
http://msmvps.com/blogs/richardsiddaway/archive/2011/10/23/1760058.aspx
the warning for the quick fix engineering is not there on 2012 but there on 2007 hope the info help you to achieve your output.
Kamala kannan.c| Please remember to click “Mark as Answer” or Vote as Helpful if its helpful for you. |Disclaimer: This posting is provided with no warranties and confers no rights -
CTM 8.0 Solaris 10 Sparc-64 Installation Problems
I am installing CTM 8.0 on a Solaris 10, Sparc 64 Sun Server/Workstation. I am having a problem installing the CTM, I installed Oracle 9i with no problems(that I know of) with patch 9.2.0.8. When I go to start the ctmsetup.sh it checks for the latest version of JRE, which is fine, however it says that I don't have the Solaris patches for JRE and it lists them. Well the patches I have are more up to date then those listed so when I tried to install the patches they listed it said that they were obsoleted by what I have already. Secondly it gives the message "Starting Cisco CTM Server Installation using Install Anywhere" but then the next line says "You pressed Cancel/Upgrade/Install" when I hadn't pressed anything, and it just stays there. Your help is much appreciated.
Thanks!Hi, how you setup oracle 9.2.0.8 patch?? I tried
cd /oraclesw9i/Disk1
./runInstaller -silent -responseFile /oraclesw9i/patchset_64bit_9208.rsp but, with key -silent i have an error: cannot communicate with X server, on my WinXP workstation?
echo $DISPLAY > myws:0.0 -
CTM 9.0 missing objects in nsMgrTool
Hi,
Our company installed Cisco Transport Manager Server Version: 9.0 Build: 600 Patches: 8 and we noticed that when we start the command nsMgrTool -l we don't get the objects: NotificationChannel and EmsSessionFactory.
Does somebody knows what that can be? Here the output of nsMgrtool:
nsMgrTool -l
[configuration loaded from classpath resource file:/opt/CiscoTransportManagerServer/openfusion/classes/jacorb.properties]
/services Context
/services/NotificationService Object
/TMF_MTNM.Class Context
/TMF_MTNM.Class/Cisco Systems.Vendor Context
/TMF_MTNM.Class/Cisco Systems.Vendor/Cisco Transport Manager.EMSInstance Context
/TMF_MTNM.Class/Cisco Systems.Vendor/Cisco Transport Manager.EMSInstance/9_0.Version Context
/TMF_MTNM.Class/Cisco Systems.Vendor/Cisco Transport Manager.EMSInstance/9_0.Version/CTM.EMS Context
Thanks in advance for your help,
Best regards,
DanyTHANK YOU THANK YOU THANK YOU THANK YOU!
[I typed it all, I am sooo happy!]
I made an entire post in here, spoke with an Apple rep, and wrote that in the Apple Feedback page as well. No one could answer it.
And you did!
You are my hero! -
LMS 4.2.2 virtual appliance fresh install : DCR Server Error
Hello,
I have installed a new version of LMS 4.2 on virtual appliance (VMware 4.1) and I have an issue.
When I go the "Device Administration --> Manage Device State" I have the following error :
Server Error
Error
Error in communicating with DCR Server. For more details click here.
DCR Server may be down. Please start the DCR Server and then refresh the page.
Following the details link I have : (I did all the check written below).
DCR Server Error
The communication error may be due to the following reasons:
The DNS resolution does not match with server assigned IP Address. Workaround: DNS resolvable IP Address should be same as server IP Address. DHCP is enabled in the server. Workaround: DHCP should be disabled in the server. The server’s original IP Address may have changed. Workaround: Restart Cisco Prime Daemon Manager. CTM registry corruption has occurred due to rebooting the server without stopping the Cisco Prime Daemon Manager. Workaround: Delete the ctmregistry and ctmregistry.backup file in NMSROOT/MDC/tomcat/webapps/cwhp/WEB-INF/LIB and then restart the Cisco Prime Daemon Manager. DCR Server and related process might be down. Workaround: Check the processes to make sure DCR Server is running, and restart it if not. The hostname change is not done by the hostnamechange.pl in LMS. Workaround: Hostname change should be done using NMSROOT/bin/hostnamechange.pl in LMS. LMS self signed certificate would have been expired. Workaround: Regenerate the certificate and restart the daemon manager.
I try to reinstall LMS 4.2 with or without patches 4.2.1 and 4.2.2 I always have the same problem. The DCR server process is running.
Here the result of the show application status LMS in SSH :
S-CISCO-LAN-MS/sysadmin# show application status LMS
Process State Pi
d
ESS Program started - No mgt msgs received 27
14
EssMonitor Running normally 29
50
EventFramework Program started - No mgt msgs received 32
95
SyslogCollector Running normally 32
96
RMEDbEngine Program started - No mgt msgs received 32
97
DfmBroker Running normally 34
24
DfmServer Running normally 36
62
DfmServer1 Running normally 36
63
FHDbEngine Program started - No mgt msgs received 36
64
EPMDbEngine Program started - No mgt msgs received 40
81
EPMServer Running normally 42
20
AdapterServer Program started - No mgt msgs received 43
20
AdapterServer1 Program started - No mgt msgs received 43
21
FHServer Running normally 43
22
INVDbEngine Program started - No mgt msgs received 43
23
PMServer Running normally 4582
IpmDbEngine Program started - No mgt msgs received 4708
UPMDbEngine Program started - No mgt msgs received 4840
UPMDbMonitor Running normally 4949
ANIDbEngine Program started - No mgt msgs received 4953
MACUHIC Running normally 4990
UTLITE Running normally 4991
CmfDbEngine Program started - No mgt msgs received 4992
CmfDbMonitor Running normally 5104
DFMLogServer Program started - No mgt msgs received 5106
DFMCTMStartup Administrator has shut down this server 0
FHPurgeTask Never started 0
DFMMultiProcLogger Program started - No mgt msgs received 5108
CSDiscovery Never started 0
DCRDevicePoll Never started 0
CSRegistryServer Running normally 5109
Tomcat Program started - No mgt msgs received 5110
TomcatMonitor Running normally 5206
Apache Running normally 5567
DCRServer Running normally 5580
CMFOGSServer Program started - No mgt msgs received 5641
TISServer Program started - No mgt msgs received 5642
DFMOGSServer Program started - No mgt msgs received 5757
NOSServer Running normally 5795
PTMServer Running normally 5796
InventoryCollector Running normally 5797
Interactor Program started - No mgt msgs received 5885
InventoryCollector1 Program started - No mgt msgs received 5886
Interactor1 Program started - No mgt msgs received 6116
UPMProcess Running normally 6117
WlseUHIC Running normally 6118
UTManager Running normally 6119
VNMServer Program started - No mgt msgs received 6120
EssentialsDM Running normally 6121
ICServer Running normally 6310
EnergyWise Running normally 6581
ConfigMgmtServer Running normally 6582
PMCOGSServer Program started - No mgt msgs received 6583
ConfigUtilityService Running normally 6584
CAAMServer Running normally 6585
IPMOGSServer Program started - No mgt msgs received 6586
TopoServer Program started - No mgt msgs received 6587
LicenseServer Program started - No mgt msgs received 6588
FDRewinder Never started 0
NameServer Program started - No mgt msgs received 6591
NameServiceMonitor Program started - No mgt msgs received 6792
EDS Running normally 6870
ANIServer Running with busy flag set 7224
UTMajorAcquisition Never started 0
EDS-GCF Running normally 7257
jrm Running normally 7258
DataPurge Administrator has shut down this server 0
IPMProcess Program started - No mgt msgs received 7535
CTMJrmServer Administrator has shut down this server 0
SyslogAnalyzer Never started 0
ChangeAudit Never started 0
diskWatcher Running normally 8381
I run out of ideas...
Regards,
AbelHi Afroz!
Thanks for the quick reply!
1) I checked files - and indeed, the third link of the file was empty.
I restored contents of the same test server (as an attachment - original files) - now everything is working fine. Many thanks for your advice!
Because of what could this happen?
Current settings are as follows (i did not change them):
[lms42/root-ade etc]# ls -la /opt/CSCOpx/MDC/tomcat/shared/lib/ctm_config.txt
-rw-r--r-- 1 casuser casusers 1037 Jul 22 13:54 /opt/CSCOpx/MDC/tomcat/shared/lib/ctm_config.txt
[lms42/root-ade etc]# ls -la /opt/CSCOpx/MDC/tomcat/webapps/cwhp/WEB-INF/lib/ctm_config.txt
-rw-r--r-- 1 casuser casusers 1084 Jul 22 13:54 /opt/CSCOpx/MDC/tomcat/webapps/cwhp/WEB-INF/lib/ctm_config.txt
[lms42/root-ade etc]# ls -la /opt/CSCOpx/MDC/tomcat/lib/ctm_config.txt
-rwxr-xr-x 1 casuser casusers 1104 Aug 20 12:07 /opt/CSCOpx/MDC/tomcat/lib/ctm_config.txt
2) It was also noted that if address on the link "Inventory>Device Administration>Discovery>Schedule", then an error message appears:
Error
Error in getting the Discovery configuration information, please configure Standard / Custom Discovery and start the schedule.
- no any records for Discovery Schedule and not accessible button Add (for add new Discovery Jobs).
This is related errors? -
SCUP2011 - SCCM2012 SP1 CU4: 3rd party updates fail to install with SoftDistHashMismatchEvent
We publish 3rd party updates like Adobe Flash, Shockwave, Firefox with SCUP 2011 into WSUS.
These 3rd party updates are imported/synchronized into our SCCM 2012 SP1 (CU4) environment and deployed to the clients/servers.
But all of these 3rd party fail to install. Software Center returns the following error: The software change returned error code 0x80091007(-2146889721).
The standard Microsoft Updates are downloaded and installed without any error.
The 3rd party updates are downloaded by the client, but are deleted after checking the hash because of a hash mismatch (SoftDistHashMismatchEvent).
As shown in the CAS.log:
Submitted CTM job {5ACC812D-2126-4696-A852-AED288B4FEB0} to download Content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 under context System ContentAccess 26-03-2014 22:28:31 5956 (0x1744)
Successfully created download request {4F582B67-EDFC-486A-9762-96572A780CBC} for content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 ContentAccess 26-03-2014 22:28:31 5956 (0x1744)
Location update from CTM for content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 and request {4F582B67-EDFC-486A-9762-96572A780CBC} ContentAccess 26-03-2014 22:28:32 3548 (0x0DDC)
Download location found 0 - net:http://sccm.mydomain.local:8530/Content/32/04B9361CDC426D2DBC94B90A7BB0172CAE84D532.cab ContentAccess 26-03-2014 22:28:32 3548 (0x0DDC)
Download location found 1 -
http://sccm.mydomain.nl/SMS_DP_SMSPKG$/fea1aeb3-af1a-45aa-b464-4f90422b4720 ContentAccess 26-03-2014 22:28:32 3548 (0x0DDC)
Download request only, ignoring location update ContentAccess 26-03-2014 22:28:32 3548 (0x0DDC)
Download started for content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Download completed for content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 under context System ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
File 04b9361cdc426d2dbc94b90a7bb0172cae84d532.cab not expected in folder. ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
The content on the local cache location is not available anymore C:\Windows\ccmcache\px. Try downloading later ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Download failed for content fea1aeb3-af1a-45aa-b464-4f90422b4720.1 under context System, error 0x80091007 ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Download failed for download request {4F582B67-EDFC-486A-9762-96572A780CBC} ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Raising event:
[SMS_CodePage(850), SMS_LocaleID(1043)]
instance of SoftDistHashMismatchEvent
ClientID = "GUID:93FA6D8A-9689-46F4-BB57-256BE8995A7B";
DateTime = "20140326212832.587000+000";
MachineName = "SERVERNAME";
PackageId = "fea1aeb3-af1a-45aa-b464-4f90422b4720";
PackageName = "fea1aeb3-af1a-45aa-b464-4f90422b4720";
PackageVersion = "1";
ProcessID = 5124;
SiteCode = "A01";
ThreadID = 5956;
ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Successfully raised SoftDistHashMismatchEvent event. ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Error: DeleteDirectory:- Failed to delete Directory with Error 0x00000003. ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Error: DeleteDirectory:- Failed to delete Directory C:\Windows\ccmcache\px.BCWork with Error 0x00000002. ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
Releasing content request {4F582B67-EDFC-486A-9762-96572A780CBC} ContentAccess 26-03-2014 22:28:32 5956 (0x1744)
The strange thing is that 3rd party updates are downloaded/installed succesfully when using the Windows Update Control Panel applet, while WSUS and SCCM2012 are installed on the same server!
Our environment uses PKI only for communication/authentication, because we manage multiple untrusted networks
All servers are virtual servers (VMWare ESXi 5.5) with Windows Server 2008 R2 SP1 + latest updates.
I already performed the following trouble-shooting tasks without any success:
- I reinstalled the different Site System Roles.
- Removed the SCCM client from the SCCM database and client and reinstalled
- Removed the anti-virus software
- Redeployed the 3rd party updates
- Replaced the E1000 NICs with VMXNET3 (server and client)
- Ensured no proxy between server and client
- Downloading and installing the 3rd party updates manually from the specified download locations
(e.g.
http://sccm.mydomain.local:8530/Content/32/04B9361CDC426D2DBC94B90A7BB0172CAE84D532.cab or
http://sccm.mydomain.nl/SMS_DP_SMSPKG$/fea1aeb3-af1a-45aa-b464-4f90422b4720) succeeds without a error.
I really don't know what's going wrong.
Is it a bug?Hi,
I recommend that you try uninstalling the following KB’s.
Run the following command to uninstall:
wusa /uninstall /kb:2735855 /quiet /norestart
wusa /uninstall /kb:2750841 /quiet /norestart
Meanwhile, here's one video for your reference.
Managing Third Party Updates with System Center 2012 Configuration Manager SP1
http://channel9.msdn.com/Events/MMS/2013/UD-B326
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hello
I have to install CTM server on win. machen my SCM/APO server on aix machine.
I have install standalone gatway with same SID as SCM server. then i install CTM Optimizeer by sapinst it seif .
i have maintain sm59. saying run from explicit host.
them while testing rfc im getting error as.
Connection Error
Error when opening an RFC connection
ERROR: timeout during allocate
LOCATION: SAP-Gateway on host sapodev / sapgw00
DETAIL: no connect of TP c:\optimizer\ctmsvr.exe from host sprlserver after 20
COMPONENT: SAP-Gateway
COUNTER: 2798
MODULE: gwr3cpic.c
LINE: 1872
RETURN CODE: 242
SUBRC: 0
RELEASE: 700
TIME: Fri Aug 1 12:57:06 2008
VERSION: 2
If anybody have doc. on same please.
regards
sachincan you explain how this error is resolved ...
I'm also facing the same issue ...
Thanks -
Unable to alter /tmp directory during Weblogic 10.3.3 install
I am installing on a 64 bit Linux server and each time I run the following command I get the message 'No space left on device'. Doing a df -k on Unix gives me /tmp at 100% full. I tried to change the path for the /tmp but it has not worked.
Any ideas please?
java -d64 -jar wls1033_generic.jar -Djava.io.tmpdir=/proj/db01/software/tmp -log=/proj/db01/software/install_wls_4.log1/
df -hFilesystem Size Used Avail Use% Mounted on
/dev/mapper/system-root 1008M 246M 712M 26%
/udev 6.1G 8.8M 6.0G 1% /dev
/dev/mapper/system-app 248M 11M 226M 5% /app
/dev/mapper/system-appctm 1008M 230M 728M 24% /app/ctm
/dev/mapper/system-apptivoli 3.0G 259M 2.6G 9% /app/tivoli
/dev/xvda1 130M 18M 105M 15% /boot
/dev/mapper/system-home 496M 24M 447M 6% /home
/dev/mapper/system-opt 1008M 455M 503M 48% /opt
/dev/mapper/system-proj 248M 11M 226M 5% /proj
/dev/mapper/system-tmp 1008M 771M 187M 81% /tmp
/dev/mapper/system-usr 4.0G 2.0G 1.8G 54% /usr
/dev/mapper/system-usrlocalTivoli 496M 30M 441M 7% /usr/local/Tivoli
/dev/mapper/system-var 2.0G 512M 1.4G 27% /var
/dev/mapper/system-varoptperf 496M 131M 341M 28% /var/opt/perf
/dev/mapper/datavg-apporacle 7.9G 6.5G 1021M 87% /app/oracle
/dev/mapper/datavg-projoracle 2.0G 120M 1.8G 7% /proj/oracle
/dev/mapper/datavg-projoraclearchive 5.0G 3.5G 1.3G 75% /proj/oracle/archive
/dev/mapper/datavg-projstep 20G 14G 5.0G 74% /proj/step
/dev/mapper/datavg-projstepdbredo01 6.0G 2.6G 3.1G 47% /proj/step/dbredo01
/dev/mapper/datavg-projstepdb01 125G 60G 59G 51% /proj/step/db01
cpnfs01:/proj/cpnfs01/software 700G 637G 64G 91% /proj/software
2/ Get permission denied errors
du: `./lost+found': Permission denied
du: `./app/lost+found': Permission denied
du: `./app/ctm/lost+found': Permission denied
du: `./app/ctm/ctmag63/Documents': Permission denied
3/ I am using a 'Generic Package installer—This type of installer is a .jar file.' Using this as Java is already installed on the server using JDK 1.6. Am trying to install it using a xterm Unix session in graphical mode. This jar file seems to be the only option for a 64 bit Linux.
Thanks,
Pauline. -
Instalation server patch distribution problem
HI!
I have set up an instalation server for GUI 7.10, and included both the GUI and BI components. I have patched them both with patches SAP GUI 7.10 patch level 3 and BI patch level 1 respectively.
The patching completes succesfully, NWSapSetupAdmin application shows that the patches are applied, but when the GUI is installed to a user machine, only the GUI patch is applied, and not the BI patch.
Am I doing something wrong, or is it impossible to distribute this patch via the instalation server?
Thanks,
AYes the client do have a correct certificate. If I change the boundary to point to a Server 2012 or Server 2008 Distribution Point they pull content without issue. When I change the boundary back to a Server 2003 DP they start getting "Access
Denied" once again.
The CAS log looks similar to the ContentTransferManager log in that it reports the link as HTTP instead of reporting it correctly as HTTPS like in the DataTransferService log. Its just not consistent and I have verified that you can't even access the
site through standard HTTP, it errors saying you must use a secure channel (HTTPS) and I am able to browse the site just fine as HTTPS.
A few entries from the CAS log are below:
CContentAccessService::NotifyDownloadProgressEx - downloaded size -2, total size 0 ContentAccess
Location update from CTM for content Content_be7aaec1-0fb3-4c51-8f12-5adb0673b44e.1 and request {293F5F55-5C9B-4E83-A442-B0A930EE447C} ContentAccess
Download location found 0 - http://SERVERNAME/NOCERT_SMS_DP_SMSPKG$/Content_be7aaec1-0fb3-4c51-8f12-5adb0673b44e.1 ContentAccess
Download location found 1 - http://SERVERNAME/SMS_DP_SMSPKG$/Content_be7aaec1-0fb3-4c51-8f12-5adb0673b44e.1 ContentAccess
Download request only, ignoring location update ContentAccess
Be kind and Mark as Answer if I helped.
Maybe you are looking for
-
Help - iTunes V4.8 'Program Error' at end of install.
Please can anyone help with this CD installation failure of itunes only (without ipod connected): The installation of quicktime seems ok then iTunes, but on completion a window opens stating 'Program error, iTunes will close.. an error log was create
-
How do I update CS5's camera raw plug in?
I have CS5, and just upgraded to the Nikon D610. The Camera Raw Plug In currently installed does not include the D610. How do I go about updating it? I've done it for Lightroom, but that update didn't do anything for PS.
-
I am receiving a message "You can't open your current photo library using this version of iPhoto." When I try to open iPhoto. It continues to say, "You have made changes to your photo library using a newer version of iPhoto. Please quit and use the l
-
Atv audio out of sync with computer speakers
I stream music to my atv and to speakers connected to an airport express. My computer speakers and the speakers connected to the airport express are always in sync with one another, but the audio on the atv is always lagging behind. Any way to fix th
-
I haven't used my eleven month old Mac book pro in two months and when I turned it back on it gets stuck at the silver wheel with the wheel of death spinning it has been like this for two hours