CTM Planning run
when i run CTM planning run it shows error
"error in server slection"
i check in /sapapo/opt09 in this transcation it shows
CTM01 VERSION COULD NOT BE FOUND
DPS01 VERSION COULD NOT BE FOUND
MMP01 VERSION COULD NOT BE FOUND
ND01 VERSION COULD NOT BE FOUND
SEQ01 VERSION COULD NOT BE FOUND
SNP01 VERSION COULD NOT BE FOUND
VSR01 VERSION COULD NOT BE FOUND
how can i resolve this
regds
Similar Messages
-
Error occurred during CTM planning run
Hi folks,
Appreciate your co-operations!
I am facing the problem while running the CTM with the profile DEMO2.
CTM Planning Run gives one error and alert.
Error: Error occurred during CTM planning run
Technical Data
Message type__________ A (Cancel)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 401
Problem class_________ 1 (very important)
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ A
Alert: Internal error has occurred (<!> Segmentation fault)
Technical Data
Message type__________ E (Error)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 571
Message variable 1____ <!> Segmentation fault
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ C
Log file display
<i> 04:37:59 optsvr_main.cpp(1363) 'SuperVisor' => Commandline : 4 respected parameters ...
Args:
m0001006
sapgw04
28812935
IDX=1
<i> 04:37:59 optsvr_main.cpp(645) 'SuperVisor' * SAP APO CTM Engine [CTM/ctmsvr]
<i> 04:37:59 optsvr_main.cpp(646) 'SuperVisor' * Copyright u00A9 SAP AG 1993-2009
<i> 04:37:59 optsvr_main.cpp(647) 'SuperVisor' *
<i> 04:37:59 optsvr_main.cpp(648) 'SuperVisor' * Version : 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
<i> 04:37:59 optsvr_main.cpp(649) 'SuperVisor' * Platform : ntamd64/x64
<i> 04:37:59 optsvr_main.cpp(650) 'SuperVisor' * Interface : 2.0
<i> 04:37:59 optsvr_main.cpp(651) 'SuperVisor' * Build date : Nov 25 2009 22:59:47 [1259186387]
<i> 04:37:59 optsvr_main.cpp(652) 'SuperVisor' * Build machine : PWDFM163
<i> 04:37:59 optsvr_main.cpp(653) 'SuperVisor' * Latest change : 407661
<i> 04:37:59 optsvr_main.cpp(654) 'SuperVisor' * NW release : 7100.0.3300.0
<i> 04:37:59 optsvr_main.cpp(655) 'SuperVisor' * Perforce branch: 7.0_REL
<i> 04:37:59 optsvr_main.cpp(656) 'SuperVisor' *
<i> 04:37:59 optsvr_main.cpp(676) 'SuperVisor' * Hostname : m0001006
<i> 04:37:59 optsvr_main.cpp(677) 'SuperVisor' * OS version : 5.2.3790 (WinServer2003, NTAMD64) SP2.0 (Service Pack 2), SERVER ENTERPRISE TERMINAL SINGLEUSERTS
<i> 04:37:59 optsvr_main.cpp(678) 'SuperVisor' * PID : 6768
<i> 04:37:59 optsvr_main.cpp(683) 'SuperVisor' * CWD : D:\usr\sap\SC6\DVEBMGS04\log
<i> 04:37:59 optsvr_main.cpp(684) 'SuperVisor' *
<i> 04:37:59 core_sysinfo.cpp(453) 'SuperVisor' * free disk space: 190433 MB
<i> 04:37:59 core_sysinfo.cpp(454) 'SuperVisor' *
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * Memory information:
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * physical memory: 10238 MB total, 6511 MB available [63% free]
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * page file : 73212 MB total, 60889 MB available [83% free]
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * virtual memory : 8388607 MB total, 8388499 MB available [99% free]
<i> 04:37:59 optsvr_main.cpp(693) 'SuperVisor' *
<i> 04:37:59 optsvr_main.cpp(783) 'SuperVisor' * running in invoke mode
<i> 04:37:59 optsvr_rfcconnection.cpp(871) 'MsgMgr' <RFC> RfcPing(RFC_HANDLE=1) received in thread#6912
<i> 04:37:59 optsvr_rfcconnection.cpp(692) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_SET' for sending of parameters/options
<i> 04:37:59 optsvr_rfcconnection.cpp(703) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_GET' for receiving of parameters/options
<i> 04:37:59 optsvr_rfcconnection.cpp(712) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PROGRESS' for progress informations
<i> 04:37:59 optsvr_rfcconnection.cpp(721) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_MESSAGE' for messages
<i> 04:37:59 optsvr_rfcconnection.cpp(730) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_RESULT' for (intermediate) result informations
<i> 04:37:59 optsvr_rfcconnection.cpp(739) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_SYSINFO' for system informations
<i> 04:37:59 optsvr_rfcconnection.cpp(748) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PERFINFO' for performance informations
<i> 04:37:59 optsvr_rfcconnection.cpp(1269) 'MsgMgr' <RFC> skipping empty profile value [GENERAL] sPROFILE_CUST_ID
<i> 04:37:59 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 7
number of received data: 10569
number of sent data : 1349
overall reading time : 9073
overall writing time : 162
<i> 04:37:59 optsvr_main.cpp(1110) 'SuperVisor' * Starting MainScript ...
<i> 04:37:59 optsvr_main.cpp(1445) 'SuperVisor'
***************************** OPTSVR - OPTIONS ***************************** *
[CTM_PROFILE]
nCTMENGINEPACKAGESIZE = 500
sCOMPONENT = SCM
sCTMLOGFILE = ctm.DEMO2.0000_0001.20091201043758.log
sCTMLOGFLAG = 0
sCTMPROFILE = DEMO2
sRELEASE = 700
[general]
bUNICODE = true
nSLOT_MAXIMUM = 1
nSLOT_MINIMUM = 1
nSLOT_RESERVED = 1
sAPO_RELEASE = 700
sAPPLICATION = CTM
sExeDir = d:\apoopt\ctm\bin
sExeName = ctmsvr.exe
sHOST = m0001006
sInvokeMode = invoke
sLANGU = E
sMANDT = 700
sPRODUCT_NAME = APO
sPRODUCT_PATCHLEVEL = 0001
sPRODUCT_RELEASE = 700
sPROFILE = DEMO2
sSESSION = tju5Bmz21}6WVG0Sn6pv3W
sSYSTEM = SC6
sUNAME = MBATCHA
[init]
sSECTION0001 = INIT
sSECTION0002 = GENERAL
sSECTION0003 = PASSPORT
sSECTION0004 = CTM_PROFILE
[PASSPORT]
bIS_REMOTE = false
nACTION_TYPE = 1
nSERVICE = 1
sACTION = /SAPAPO/CTMB
sPRE_SYSID = SC6
sSYSID = SC6
sTRANSID = 2205DEDE7A5BF16DA07D001CC46CF90E
sUSERID = MBATCHA
************************** OPTSVR OPTIONS - END **************************** *
<i> 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from []
<i> 04:37:59 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->download
<i> 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 806 to OutputInterface from [MG]
<i> 04:37:59 ctm_modelgen.cpp(166) 'CTMModelGenerator' ======================================================================
<i> 04:37:59 ctm_modelgen.cpp(167) 'CTMModelGenerator' MG::download
<i> 04:37:59 core_msgmgr.cpp(1110) 'MsgMgr' renaming tracefile
<i> 04:37:59 core_msgmgr.cpp(1111) 'MsgMgr' old name: optsvr_trace20091201_043759_1a70.log
<i> 04:37:59 core_msgmgr.cpp(1112) 'MsgMgr' new name: ctm.DEMO2.20091201_043759_1a70.log
logfile reopened : Tue Dec 01 04:37:59 2009
logfile name : ctm.DEMO2.20091201_043759_1a70.log
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PRDAT_RFC_READ
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPAR_RFC_READ
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_LOC_RFC_READ
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PPM_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_TRANS_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_RES_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SSTCK_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_CAL_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPER_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_INCMD_RFC_READ
<i> 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_DEM_RFC_READ
<i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SUP_RFC_READ
<i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_UCMAP_RFC_READ
<i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:38:04 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 810 to OutputInterface from [MG]
<i> 04:38:04 ctm_modelgen.cpp(735) 'CTMModelGenerator' MG::download done
<i> 04:38:04 ctm_modelgen.cpp(736) 'CTMModelGenerator' ======================================================================
<i> 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CTMModelGenerator' [6]->download = success [ctx size : 1]
<i> 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Solve' with 9.22337e+012 seconds left
<i> 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Match' with 9.22337e+012 seconds left
<i> 04:38:04 ctm_executionmanager.cpp(102) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(103) 'SuperVisor' statistics:
<i> 04:38:04 ctm_executionmanager.cpp(104) 'SuperVisor' number of demands: 7
<i> 04:38:04 ctm_executionmanager.cpp(105) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(107) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(108) 'SuperVisor' parameters:
<i> 04:38:04 ctm_executionmanager.cpp(118) 'SuperVisor' time continuous planning
<i> 04:38:04 ctm_executionmanager.cpp(125) 'SuperVisor' backward scheduling
<i> 04:38:04 ctm_executionmanager.cpp(184) 'SuperVisor' CBCLP enabled
<i> 04:38:04 ctm_executionmanager.cpp(457) 'SuperVisor' ======================================================================
<i> 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CtmEngine' [7]->run
<i> 04:38:04 ctm_executionmanager.cpp(523) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(524) 'SuperVisor' EM::execute for packet 1
<i> 04:38:04 ctm_executionmanager.cpp(1570) 'SuperVisor' EM::execute for packet 1 done
<i> 04:38:04 ctm_executionmanager.cpp(1571) 'SuperVisor' ======================================================================
<i> 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CtmEngine' [7]->run = success [ctx size : 1]
<i> 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->upload
<i> 04:38:04 ctm_modelgen.cpp(1097) 'CTMModelGenerator' ======================================================================
<i> 04:38:04 ctm_modelgen.cpp(1098) 'CTMModelGenerator' MG::upload of packet 1
<e> 04:38:05 ctmsvr_script.cpp(229) 'SuperVisor' <!> STRING EXCEPTION : <!> Segmentation fault
<i> 04:38:05 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:38:05 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
[CHECK_UPPERBOUND]
nPEAK_MEMORY_NTAMD64 = 45344
[CHECK_LOWERBOUND]
<i> 04:38:05 optsvr_main.cpp(1209) 'MsgMgr' Performance values:
bSuccess false
nCPU_TIME 0
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
tracefile ctm.DEMO2.20091201_043759_1a70.log
<i> 04:38:05 optsvr_main.cpp(1235) 'MsgMgr' Performance Monitor values:
ENGINE_VERSION 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
nCPU_TIME 0
nHD_FREESPACE 190433
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
<i> 04:38:05 optsvr_dsr.cpp(96) 'MsgMgr' <writeDSRdata> tracing not active => no DSR written
<i> 04:38:05 optsvr_main.cpp(1256) 'SuperVisor'
Finished->FAILED ...
<i> 04:38:05 core_memmgr.cpp(564) 'MsgMgr' transferring memory of heap 6912 to main heap
<i> 04:38:05 core_memmgr.cpp(606) 'MsgMgr' finished transfer of heap 6912
<i> 04:38:05 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 116
number of received data: 420457
number of sent data : 39262
overall reading time : 5.30093e+006
overall writing time : 3831
<i> 04:38:05 optsvr_main.cpp(1332) 'MsgMgr'
OptimizeServer says GOOD BYE
Please help me to resolve this issue.
Thanks & Regards,
KhadarHi Khadar,
1) The information you have provided is the CTM optimiser log.
Run the job in background and in sm37 and click on job log &
analyse the exact error happened. In case if you are not able
to do, please provide the error log.
2) Check the livecache is stable in its operations when the job
runs (check with basis team)
3) Run consistency check for master data before CTM run
4) Check for any struck queues and clear those and rerun
5) If you feel more inconsistencies in system, run livecache
consistency and rerun CTM run
Regards
R. Senthil Mareeswaran. -
Hello,
I tried to execute CTM planning run, it prompts me with this error message.
"Check the settings in SAP APO Customizing for the optimization server."
I already assigned "CM01" as Optimization Server Id in CTM Profile, but it still prompts the error message.
Does anyone encountered this error ?
Thanks in advance.
D'GeePlease go through Note 886103 - System Landscape Copy for SAP SCM and make sure you did right settings .
Manish -
Consolidation of Planned orders after CTM planning run
Hi everyone,
We use CTM planning engine and create planned orders for the unfulfilled demand. Since Demand is coming from various locations multiple planned orders are created at the supply location. But the requirement is that all these planned orders need to be consolidated to 1 planned order.
How can we acheive this without disturbing the existing pegging relationships?
For example:
Current scenario:
3 planned orders at location X based on the demand from locations A, B and C. Then a pegging relationship exists (Purchase Requistions) between A and X; B and X; C and X.
Requirement:
Above 3 planned orders need to be consolidated to 1 Planned order and still the pegging relationship to supply the demand locations should exist.
Please let me know if anyone has similar business scenario and has working solution approach
ThanksHi,
You can increase the lot size to club your demand requirements. You can also try using period type lotsize to club daily, weekly, monthly requirements.
Regards
R. Senthil Mareeswaran. -
Exclude sales orders based on sales order type from CTM planning run
Dear people,
We have sales orders in R/3 with custom sales order types, like ZE01, ZE02 etc.
These sales orders are CIFed to APO and all sales orders have ATP category BM. We use CTM and we want to exclude sales order with sales order type ZE01, is this possible?
Which enhancement could be used to exclude sales orders with selection on sales order type?
Edited by: Peter237 on Jan 19, 2012 12:35 PMDear,
Check the requirement type of your sales order line item in VA02 procurement tab it should be Reqmt type of customer reqmt KSL
Also check the strategy assign in material master and MRP group OPPR and then check the setting of strategy 10 in OPPS there should be
Customer Requirement planning
Reqmt type of customer reqmt KSL Sale frm stck w/o ind.req.red.
Requirements class 030 Sale from stock
Allocation indicat. No consumption with customer requirements
No MRP :- 1 Requirement not planned, but display.
Please try and come back.
Regards,
R.Brahmankar -
How to set "FAST_READ" in CTM planning run?
Dear gurus:
I've already implemented the notes "Note 1070611 - CTM order reading performance problem" into our system. And the notes tell me, I have to activate this function by set the field "FAST_READ" = "X". But I cannot find this field in CTM profile or global setting of CTM. So I cannot make sure it is used or not. Thanks for your help.
regards,
ScottHi Scott
Regarding on the parameter, I think you can define it n CTM profile.
Please go to t-cd /SAPAPO/CTM and open your CTM profile.
Then from the menu, please go to "Control" => "Planning parameter".
Then put FAST_READ in parameter field and put value X in value field.
Hope this help your problem.
Best Regards
Keiji -
CTM planning for process industry
Hi,
We are taking CTM planning run in a process industry scenario where we are having continuous processing. But when we do CTM planning CTM creates PP/DS planned order to meet the delivery date of orders and for some orders their are unscheduled gaps between operation due to non availability of next resource.
Is it possible to create orders in CTM without any unscheduled gaps between the operations as is the case in case of orders created using PP/DS?
Regards,
Sanjog MishrikotkarHi kiran Ghule,
With the functions of the Quality Management (QM) module, you can implement it.
The QM application component supports tasks associated with quality planning, quality inspection and quality control. In addition, it controls the creation of quality certificates you can do this
Explore your self in this module if any problem then come back.
Regards
R.Brahmankar -
End Planning Run After Order Selection - issue not clearing down all plans
Hi,
We are using the CTM Profile with "End Planning Run After Order Selection" ticked in the basic settings tab in order to clear down previous CTM runs. So we have a CTM deletion profile.
The issue is that it requires more than one execution to clear down the Planned Orders / Purchase Requisitions. You execute the Deletion CTM Profile once and it will clear down some of the Purchase Requisitions and Planned Orders and leave some still in place. You then have to execute the deletion CTM profile one or two more times in order to delete the remaining Planned Orders / Purchase Requisitions.
This is clearly not realiable for a batch process to clear down plans. Has anyone else experienced this and does anyone have a solution. The solution cannot be based on RLCDELETE or /SAPAPO/DELETE_PP_ORDER
MarkHi,
Can you check your planning mode and deletion mode combination defined in the ctm profile.
Prerequisties for deleting the orders:
u2022 They are within the planning and deletion periods
u2022 They do not have pegging relationships with demands outside of the planning period
They lie outside of the production horizon, stock transfer horizon and the planned delivery time
In addition, all location products of an order must be included in the Master Data Selection so that CTM can
delete the order. Also, CTM cannot delete any manually fixed orders.
If you have selected the SNP Order order type in the CTM profile, CTM cannot delete any PP/DS orders. This
restriction is also valid the other way round for the PP/DS Order order type. If you select this order type, CTM also
deletes SNP orders.
Thanks,
nandha -
Planning run to consider Ware house stock before PREQ for Vendor
Hi All,
I need some help in setting up the system for below requirement :
1.When i am running my planning run at DC 1st I need to consider available stock at my Warehouse ( STO) and then create a PO for Vendor to fulfill any remaining demand .
2.While checking the stock at warehouse i need to check for Main product Stock and then check for Substitute Product stock as well before creating PO
Your valuable suggestions greatly appreciated for Prob1 or Both
Thanks in Advance,
ChandraChandra
What kind of solver are you running? Heuristics or CTM or Optimizer?
Sam -
CTM planning generates excess stock
Hello experts ,
We are using CTM planning and we have given build up safety stock and the lot sizing procedure in product master is by period (W). Now CTM planning is generating excess stock for this material . Why is it ?? Can anyone help pleaseIt is not clear in your Q whether the excess stock created while running CTM is lesser or greater in magnitude than the Lot Size. I would not be too surprised if the excess stock is lesser than Lot Size. Not that lot sizing restrictions only apply on supply side and hence there could be a situation where supplies are created in excess.
One other situation where this can happen is when there are unpegged fixed supply orders in the system. In that scenario the order may not be sensed as a supply order by CTM. You can verify that by looking at Pegging Overview related transaction in PPDS. Or do a supply simulation in CTM profile. It can clearly let you know the supply orders considered.
Excess stock can also be generated if there are Quantity Based Safety Stock requirements in the system.
To isolate the problem, I would also try out scenarios with standard lot size instead of periodic just to make sure that there is nothing funny happening with the latter setting. -
How to exclude Sales Orders from a planning run
Hi,
I run MD02 and i discover that planned orders are being created as procurement proposals for sales orders and the planned independent requirement.
I want planned order to be created only for the Planned independent requirements ONLY.
Is there a way that sales orders can be excluded from the planning run?
Thanks in advance for your suggestions.Dear,
Check the requirement type of your sales order line item in VA02 procurement tab it should be Reqmt type of customer reqmt KSL
Also check the strategy assign in material master and MRP group OPPR and then check the setting of strategy 10 in OPPS there should be
Customer Requirement planning
Reqmt type of customer reqmt KSL Sale frm stck w/o ind.req.red.
Requirements class 030 Sale from stock
Allocation indicat. No consumption with customer requirements
No MRP :- 1 Requirement not planned, but display.
Please try and come back.
Regards,
R.Brahmankar -
Exclusion of Sales Orders from CTM Planning
Gurus,
Without customizing, is there a way to exclude selective sales orders, say by certain delivery priority number, from CTM planning? Is there any standard configuration setting that SAP APO offers for this?
I want to exclude the SOs with delivery priority no. X from being identified and planned by CTM.
Appreciate a quick response on this.
Thanks,
ChandraHi Chandra,
1) If the sales orders that you want exclude are falling under certain
fixed time period, then you can restrict selecting those orders
using transaction /SAPAPO/CTMORDSEL - Order Selection
and in the selection tab, you can filter those under radio
button "fixed time period" and select the ATP categories
2) In material master, if you provide very low priority and also if
you maintain time based priority in SNP 2 tab, till that period with
that low priority, the system will consider that item for lowest
priority during planning
Regards
R. Senthil Mareeswaran. -
Safety stock not covered by schedule lines in planning run
Hi !
In our organization we are trying to implement scheduling agreements and automatic creation of delivery schedule lines through MRP. We have MRP type PD and it considers the reservations created by PM orders and Production orders as requirement elements. When I do the planning run, it creates schedule lines for the PM order reservations and purchase requisition for safety stock. I need it to create schedule lines for all scenarios. Kindly help and suggest a solution.
Regards,
SatyaHi,
Please refer the below links.
Schedule Lines not getting created in MRP
Re: No Scheduling line is generated when RUN MRP
Hope it helps you.
Thanks. -
SNP Optimiser issue (Annual Planning Run)
Dear Friends,
My fiscal year is 01.04.2010 to 31.03.2011, Now I am trying to run Annual planning run for the current FY.
After the run, If i see in SNPOPLOG, all demand is showing as unfulfilled. If i run for the next FY it is planning.
I want to run for the current FY, what settings I need to do?
sreeWhat is the time bucket profile of data view in which u are running optimizer. If it is a single yearly bucket you cannot run optimizer in current year. (your first bucket cannot have the start date in past)
Choose 12 monthly buckets. and run planning. You may 'view' the planning results in single annual bucket.
even if you do this, there will be no plan in current month. system will plan from next month onwards.
Hope this helps.
Regards,
Nitin
Edited by: Nitin Thatte on Apr 13, 2010 6:01 PM -
Error - Background Processing: Planning Run
Hey Guys,
I want to schedule a background planning run. The report /SCMTMS/CL_TS_VSR_BGD is terminated
because of the following error. Has anyone an idea how to solve this issue?
Kind reagards,
Christian
Error in the ABAP Application Program
The current ABAP program "/SCMTMS/VSR_OPT_BGD" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"/SCMTMS/CL_TS_VSR_BGD=========CP " in include
"/SCMTMS/CL_TS_VSR_BGD=========CI " in
line 42:
"Direct access to the components of the global interface /SCMTMS/IF_SRV"
"MGR_TYPES is not allowed (INTERFACE /SCMTMS/IF_SRVMGR_TYPES LOAD state"
"ment is missing)."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SANNG "
Error in the ABAP Application Program
The current ABAP program "/SCMTMS/VSR_OPT_BGD" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.Can you refer the following SAP Notes will help you to resolve your problem.
1230638 Memory consumption for VSR planning run too high
1285772 Planning: Write application log from VSR batch reports
1279704 Planning: Various performance improvements
Maybe you are looking for
-
Help - my songs don't show up on 30G w/ video...
Everything worked yesterday... I connected to my PC and added some files (not songs) & disconnected with no issues. Today, I turn on my Ipod and nothing is on it. However, when I connect it to my PC, and click into MY COMPUTER & show hidden files, IP
-
Script to get application stats running on multiple windows servers
Hi, I am beginner in powershell and trying to write a script to get the different stats of an application/s running on windows WAS server. am trying to gather all the stats into one custom object and planning the tabular output to send via html mai
-
I'm interested in the open source commands offered in "osxutils 1.7" Probably due to my naivete but also possibly due to an installation hiccup, when I "installed" this after downloading, I do not find the commands installed anywhere and they are cer
-
Setting Activity parameter property "literal" with OMB Plus
Does anybody know how the property "literal" can be set to "false" with an OMB command? To change e.g. the value, the following command works: OMBALTER PROCESS_FLOW 'LOAD_STAGE' \ MODIFY ACTIVITY 'STG_POS_MAP' MODIFY PARAMETER 'P_AUDITID' SET PROPERT
-
Chromebook won't print last page (Google Cloud Print)
I have an MF6160dw. When I print from my Chromebook, the printer will print everything but the last page. The printer shows an error.