CTM set up time along with mfg time at supplier
Hi All,
where to enter the set up time along with mfg time at supplier in ctm ....Set up time is nothing but time required for the supplie r to procure his RMs and set up the mfg lines before commensing of prodn, lot specific.
the setup time you define can be modeled as procurement time in procurement tab at supplier. Mfg time should be modeled in PPM as the operation lead time.
Similar Messages
-
Just bought new time capsule- need help setting up WiFi network with another router
Here ismy situation.
I had a wireless network setup up at home using a Belkin wifi router.
I have 2 macBooks (1 pro, 1 air) and 2 iphones that connect wirelessly and a desktop PC that is hard wired to the ethernet port. In addition, I have a Verizon wireless network extender plugged in by ethernet. All of the hard-wired gear is in our 3rd floor attic office (and the wireless signal was strong throughout the house).
The Belkin wifi router was plugged into a wall ethernet jack that is in turn wired into a Linksys router in the basement (along with multiple other ethernet ports througout the house) and is hardwired to the Cable modem next to it. All of the hard-wired ethernet stuff (including the router in the basement) was there when we bought the house, and I have no clue in the tangle of wires how to sort them out (but don't really think I need to)
I just purchased a TimeCapsule to do wireless backups of my 2 macbooks, and tried to set it up alongside the existing wireless modem.
Needless to say, this did not work well. I called AppleCare, and was told that the TimeCapsule needs to be the "1st" wireless adapter, so I went into the basement, and connected the time capsule directly to the cable modem, and then out to the basement router. The Belkin router still needs to be in the attic to supply the PC and the Verizon adapter (so it is near a window for GPS signal).
If I try to name the WiFi network the same SSID on both the TC and the belkin router (to have dual signal strenth coverage) the whole thing gets messed up and the TC cannot be "found" by the aiprort Utility software.
What I have done now is that I have 2 side-by-side wireless networks with 2 unique names (actually 3, because I enabled the 5Ghz signal on the TC), but our wireless devices do not "switch" automatically from one SSID to another stronger signal SSID as we move through the house
Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.
OK.. sounds like a mess.. or at least messy and the previous people should have left a log book with all the IP address info in it.. you have far too many routers.. but from here it is impossible to tell how they are configured. Most are probably just setup as AP.
Naming rule for wireless.. Same SSID same security different channel.
SSID ie wireless name to work on the PC side should have no spaces and no special characters. TC name should also follow that rule. So the devices need to all set with fixed channels.
Don't worry too much about iStumbler and what is outside your house.. there isn't enough channels at 2.4ghz anyway. And you are going to need to use them all. There are only three non-overlapping channels. 1, 6, 11 so set each device to one of those channels. The TC should be as close as you can to where you normally use the MacBooks.. and turn on the 5ghz. You will have to leave it to automatic name so the Macbook can also roam across from 2.4 to 5ghz. But if you care to use a different name and force it onto 5ghz the speed is much better as long as you are in the same room.
Roaming is great in theory.. often in practice it just doesn't work.. you need to step in and turn off wireless and then turn it back on.. you can quickly see which router it is connecting to by hold down the option key when you click the airport fan in the top menu area.. and look at bssid.. you will have to figure out which number MAC address relates to which router.
Also do not be surprised if Lion gives you issues. It seems to often drop out and lose connection to the TC as a backup device even if internet is still working. -
Whenever I launch Firefox, multiple tabs also start to open along with the Mozilla Firefox Start Page, which is very irritating. How can I stop this to happen each time I launch the browser?
See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved
It is also possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore -
I updated my iPod Touch to 6.0.1. -- after much prompting from iTunes. Now my music is GONE (along with apps, photos and podcasts). After syncing a bunch of times some of it came back, but not all of it. How odd is that? How can I get my music back?? I'm really bummed! Everything shows in iTunes, but it's not synching right. So glad I updated. NOT.
Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
Therefore, remembe the passcode that you enter this time.
It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup. -
CK11N (Cost estimate with qty structure) Set Up time calcualtion
Greetings..
I have an following activity data for operation 10 with base qty 40.33 kg
Op.10 Set Up Time 10 min
Op. 10 Machine Time 20 min.
Now for this material when i create Cost Estimate with qty structure (CK11N) for this material, i m getting the result of costing itemization for costing based on COSTING LOT SIZE as 1 kg
Set Up time coming 10 min along with its cost.
Op. Time coming 0.496 min along with its cost.
But when i change costing based on USER ENTRY with entry equal to base qty of routing as 40.33 kg
Set Up time coming 403.33 min along with its cost.
Op. Time comming 20 min along with its cost.
Why set up time is multiplied by USER ENTRY qty.
It should give the set up time as 10 Min for USER ENTRY 40.33 kg.
Formula for Setup requirement is SET UP TIME (SAP005 = SAP_01)
Edited by: SAP PP on Sep 15, 2009 2:22 PM
Edited by: SAP PP on Sep 15, 2009 2:23 PMHI,
Request you to check the Setup fromula in the work center Costing Tab screen. Also chech whether you are using any formula in the routing details in the User defined fields (which will be picked from the WORK center data.
Hope this will help you.
regards
radhak mk -
Setting up new book with single pages but facing preview and breaking up pages at print time
I have a new book to design. Last time on a similar project (with 100 pages) I had a massive cry at print time as the printer wanted single pages with bleeds. I had set up the book with facing pages. When I unchecked to non facing pages I lost all my formatting and margins... I spent hours fixing this up.... I do need to show double spreads to the client as we go along and I do want to work in a mode that shows both left and right next to each other (ie in a book format). What do you suggest? I have been looking at setting up as single pages side by side and then at print time I think I can move all my right hand pages over with the break up page function and then fix up all my bleeds manually.? thanks in advance
lisalip schrieb:
no my printer needs 5mm bleed all around for the books I am doing and wants single pages with crops and bleeds
I will check the link and hope ok
I do prefer to design with facing pages but as I said it was a nightmare for me last time when setting for print
You confuse single pages with non facing document.
Every page has to be its own page. When your document has facing pages you have to set up a document with facing pages. There is no way around. Otherwise you will have problems with the left and the right page number and a lot of other issues.
If the printer needs single pages you have to export your document as PDF with single pages. That means deactivate the spread option in the PDF export dialog.
Here I have an example:
Situation:
In the 2 spreads on the top you don't have a problem when you export to a single page PDF. The bleed is taking material from the opposite page. It is ok and not disturbing.
But the bottom spread is different. Here you see a design break. It would be disturbing, if you take material from the opposite page. In many cases you would not realize it, but there are several situation where it might be a problem like glue or o-wire bindings where the bleed might become visible.
So you have to go to the page panel.
You have to select the spread first, then you go to the fly-out menu and select don't "allow selected spread to shuffle" pages. The numbers of the spread will appear in rectangle brackets.
Now you can drag the right (or left) page away from their counterpart on the spread. First you have to deselect any pages from that spread, so you can click on any thumbnail of any other page of any other spread. Then click on the right page of that spread. Only this pages has to be selected.
You see the icon of your curser changes as it is in the image above. Drag it as far as you see a thick vertical line. Then release sthe curser.
As result you have now seperate pages. You need only to extend the image, here on page 6. I have taken an image which is large enough, so I need only to move the image frame edge to the bleed.
When I export a single page PDF, as your printer wants I don't get problematic bleed from the opposite page.
You can download this example as IDML file. https://www.dropbox.com/s/qnotrl1ihe7umh7/SinglePages-Spread%20Ordner.zip -
How do I put date along with time on my new iPad?
I need to put date along with time on the top bar on my new I pad but just can't do it, need some help. Thank you in advance.
Unless you can do it with a third party app - and I haven't seen one that will do it - you can't put the date at the top of the iPad. Those features are built into the iOS and there is no user setting to change or add anything to the time setting at the top.
-
when i send an email to someone i recieve multiple copies of it it my folders [ usally varying between all mail, trash, and important] they all say my name on them. i recieve about 20 - 40 of them at a time , even after i delete them next time i check my mail they are back . along with this any message that has been sent to me in the past that i have deleted also reappears but only as single messages. im recieving hundreds of all these a day and it has made my email become unmanagable and im extremly frustrated. my computer is new and i never made any change to the preferences before this started happening so i have no idea . has anyone had this problem , have any ideas or know how to fix it? your help would be greatly appreciated . also to add i also recieve them whenever checking mail on my iphone i never had a problem on the phone until i activated the email on my new imac. and the email app uses my gmail acount if that helps?
no, I didn't ask to burn a picture....this is why I am confused to how the picture got on there.
I understand what you are saying regarding the multi-session thing (how do I avoid this if my other cds with photos on them have this, and I don't know they do?)
but what I do know is that cd had photos on it (it definately wasn't full, and maybe that is why I haven't had a problem with others...they have all been full) and no one else uses my Mac, so I know no one else put the picture on that cd. I may have inadvertantly burned the picture, but if I did, I don't know what I did to make it burn the picture onto the cd.....
The only thing that happened was I opened iphoto so I could save some of the pictures that were already on the disc, but when I went to look for the pictures on the cd, the only thing that was on it, was an iphoto picture....which I didn't ask to be put there.....
I have previously burned pictures onto CD using my Mac with no problem, and I've pulled pictures off CD that were burned using a PC. So I guess I need to know how to determine if the cds have this multi-session thing going on?
iMac Intel Core Duo Mac OS X (10.4.7) -
I updated to 3.6.15 and every time I open Firefox the Thank You for upgrading window pops up along with my normal homepage. How do I get rid of that?
This link shows how to do that - https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
-
How do I set up Time Machine to work with an Iomega network hard drive?
I have just bought a new iMac having switched from Windows, and am very much a beginner when it comes to all things Apple. Previously I had used my NAS hard drive with my old windows pc. i successfully used it to transfer a lot of data from the old pc to the iMac but can't seem to get it recognised when I try to configure time machine. I have downloaded the latest version of Iomega Home storage manager which appears in the application folder in the dock, but when I click on The HSM icon it just disappears and nothing happens. I can access the drive through the Bonjour service and can see its contents in Finder. I have looked through the forums here but much of the info assumes a level of knowledge that i don't have. Is there an 'idiot's guide' anywhere to enable me to set up time machine to use the network hard drive?
You would probably benefit from a couple of things, first going through these 2 links
Time Machine FAQs & Time Machine Troubleshooting.
If you still have questions there is a TM forum, because TM is part of OS X you will find the forum in the Snow Leopard forum. Click Apple Support Communities and in the search field type Snow Leopard. Once you are in the correct forum you can narrow your search by clicking Refine this list.
Roger -
How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO. -
How to set up time capsule with BT home hub 4.0 & Openreach
Idiots guide needed.
My TimeCapsule (year old model) had been running well from my BT Openreach box (without using the Home Hub 4.0) but recently had issues with connection dropping - BT said they've sorted out their end and can't see any remaining issues and can't offer me any more support if I'm not using the Home Hub 4.0
I reset the TC to run straight from the Openreach Box still have issues with wi-fi dropping in and out (both on ethernet and wi-fi).
Can I:....
1) set up Time Capsule running from BT Home Hub 4.0 which itself runs from BT Openreach white box (thus continuing to get support from BT)
or should i go back to
2) Time Capsule running straight from BT Openreach Box
Can some one post an idiots guide to either option?
Other stuff that may be important.
Macbook air running Yosemite (mid 2011 model)
Apple TV
Airportexpress
Time Capsule
2 x iphone 4s
Kids PC
Ethernet and wifi for above - I generally run everything hard wired via ethernet.The easiest and sure way is to use bridge on the TC as the method of connection. The TC then becomes a device in your network and gets its IP from the main router that I presume BT supply.
Method is,
1. Plug the TC WAN port into the BT supplied modem by ethernet.
2. Plug the computer you are using for the setup into the TC by ethernet.
3. Run the airport utility .. go to internet tab on the top menu..
In the bottom option, Connection Sharing choose off (bridged mode)
4. Go to the wireless page and setup wireless connection as you like it.. using whichever band you want. And make sure security is set to the highest setting, wpa2 personal. Put in a decent wireless passkey.
5. Press the update and fix whatever else the TC will show as needing fixing.. usually security stuff.
6. You can then disconnect the ethernet and connect by wireless if you want. Any port on the TC will now be a LAN port, including WAN.
This is assuming BT supply a wireless router with built in vdsl/other type of modem. If so you normally will not be able to bridge the modem, unless BT are using pppoe authentication which they haven't in the past.
If you really need to use the TC as a router then you will need to work out an alternative method. You can double NAT by placing the TC in the DMZ of the BT router if that is an option. It is not without issues in general. -
HOW TO SET UP time capsule with time machine?
I have not been successful in setting up time capsule with the time machine,can someone give me steps to follow?
What part are you having problems with? You need to make sure File Sharing is enabled on the Time Capsule (which is done in AirPort Utility). Then you just connect to the Time Capsule either wirelessly or via ethernet cable and when you go to Time Machine setup your computer should recognize your Time Capsule as a valid storage for Time Machine backups.
-
How to set up time capsule with BT Infinity
how to set up time capsule with BT Infinity
The easiest and sure way is to use bridge on the TC as the method of connection. The TC then becomes a device in your network and gets its IP from the main router that I presume BT supply.
Method is,
1. Plug the TC WAN port into the BT supplied modem by ethernet.
2. Plug the computer you are using for the setup into the TC by ethernet.
3. Run the airport utility .. go to internet tab on the top menu..
In the bottom option, Connection Sharing choose off (bridged mode)
4. Go to the wireless page and setup wireless connection as you like it.. using whichever band you want. And make sure security is set to the highest setting, wpa2 personal. Put in a decent wireless passkey.
5. Press the update and fix whatever else the TC will show as needing fixing.. usually security stuff.
6. You can then disconnect the ethernet and connect by wireless if you want. Any port on the TC will now be a LAN port, including WAN.
This is assuming BT supply a wireless router with built in vdsl/other type of modem. If so you normally will not be able to bridge the modem, unless BT are using pppoe authentication which they haven't in the past.
If you really need to use the TC as a router then you will need to work out an alternative method. You can double NAT by placing the TC in the DMZ of the BT router if that is an option. It is not without issues in general. -
I would like to set up a homegroup with a new Macbook Pro and 2 Windows PCs. The PCs are wired to an Airport Time Machine and the Mac is wireless. All computers have internet through the Airport Time Machine.
The method for setting up file sharing is described here:
http://homepage.mac.com/rfwilmut/notes/sharing.html
Maybe you are looking for
-
User in hr can able to create records in PA30.But will give read only access for all infotypes
Hi Team, I have created one test role in HR. It will give Read access to all info types. But user can able to create Info type records in PA30. Please find the P_ORGIN values below. Authorization level R Infotype * Pe
-
Product costing Cycle run for first time to complete backlog
Dear sir, In my Company we went live in April 2011 and since then we never did settlement of Product costing as process was not stream line , but now (in Aug-2011) it is stream-line and we wanted to do Proper costing Cycle run & settlement too. Can y
-
How can I buy Lightroom 6, not Lightroom CC, in Canada?
When I start Lightroom it says there is a new upgrade avaiable and gives me a link. But every time I go to the link all I get is a link to Lightroom CC. I am NOT a CC user. This has been going on for days! I need a working link or I need Adobe to cha
-
Can't import QT compatibile videos into iTunes 6
Here is what it says about importing video into iTunes 6 in the Help menu: You can also watch other QuickTime-compatible videos (for example, files that end in ".mov" or ".mp4") in iTunes. Drag a video into the iTunes window, as you would any song fi
-
Where I can maintain Text symbols and Selection texts?
Hi there, I need to maintain Text symbols and Selection texts of a program manually, but I can't find the tabs of Text symbols and Selection texts. My SAP is ECC6.0. Please help me with that... Thanks a lot, Bing