CTM with Inbound Quota..with demand and time split

Hi Experts,
I am trying to use two different quota figures for two different time periods( with no overlap).
Product X at Loc1 is supplied by Vendor1 and Vendor2.
Inbound Quota with Demand Split is used as given below:
A) 1st Jan2011 to 31st Dec2012     Quota for Vendor1= 80   Quota for Vendor1= 20
B) 1st Jan2013 to 31st Dec 2099    Quota for Vendor1= 50   Quota for Vendor1= 50
But CTM considers it as given below.
A) 1st Jan2011 to 31st Dec9999     Quota for Vendor1= 80   Quota for Vendor1= 20
B) 1st Jan2013 to 31st Dec 9999    Quota for Vendor1= 50   Quota for Vendor1= 50
I have two queries....Why CTM is not considering correct time period for Line A? Also why its taking end point as 31st Dec 9999 and not 31st Dec 2099?
Will appeciate your opinion.
Thanks

Hi Sachin
Thanks for the input.
However, this does not solve the issue with decreasing time phased safety stock in combination with multiple demand priorities.
If you run CTM with the settings you mentioned, it will respect the demand priorities, but builds up safety stock when the time phased safety stock is decreasing. (This is a release restriction). According to the documentation available, you should run CTM with the additional settings 'do not plan demand' and 'consider shortage' to overcome this. However, it does not repect the other demand priorities anymore. I tried multiple runs (with use of pegging, with different planning settings), but they all do not lead to the required result.
Edited by: S. Geurds on Nov 17, 2008 1:57 PM

Similar Messages

Problem with date and time preference

hi there,
i set my date and time and the time support yesterday and then i click the lock button to prevent further chance and last night i shut down my iMac, open it again in the morning the lock open back up and the timezone support change.
i redo that again and restart my iMac the same thing happen. is this a problem with my software or everyone have this problem?
any idea what should i do?
thanks in advance
regards AL

Having the same problem, & am running Parallels (which I haven't used for some time) not boot camp. I tick the box labeled "Set time automatically" & lock the "click the lock to make changes". When I reboot, the Lock is unlocked and the "set time...." is unticked. Any ideas. Cheers.

Problem with date and time syncing itouch to macbook

i have a problem with the date and time on ical when i sync my itouch4 w my macbookair. whatever i entered into my calendar in itouch will appear different in my ical( with a 6 hrs advance difference) and the alarm i set on my itouch in the calendar doesnt ring at the right time as set even though it is shown the time that i wanted.
Both my macbook n itouch are set to the same time zone and i have checked this many many times n the time is the same on both machine. but i just dont understand why is there a time difference when synced and my alarm just dont sound at the time it was supposedly set. it rings hours later n showing a different time that it was set but in the parenthesis the right time that i had set it.
One time my computer ran out of battery n went into sleep mode and when i open it again, the time n date setting was all off. which im surprised why it had gone off. So did this create the problem i have now with the date n time sync or something else?
please help!!!!

Having the same problem, & am running Parallels (which I haven't used for some time) not boot camp. I tick the box labeled "Set time automatically" & lock the "click the lock to make changes". When I reboot, the Lock is unlocked and the "set time...." is unticked. Any ideas. Cheers.

When I create a calendar, in iphoto 8, I had an information pane lower left corner with date and time of the picture. Can it possibly be that the iphoto developers forgot about that in iphoto 9? This was very helpful when placing images according to date.

Today I updated to the latest iphoto version. The update itself went smooth and nice as one is used to from Apple. But when I wanted to finish my already started calendar, I have encountered two problems. The first is that I can't view the aperture library anymore directly from iphoto. Instead I have to open the iphtoto library in aperture but then my calendar isn't there. So now I have to copy images back and forth. No problem.
However, the old iphoto had a small information area in the lower left corner which was very nice to place images on an exact date. This seems to be gone...?? Really? How am I supposed to sort images according to date and time when I have to back to the library view every time? That's not very convenient..Or am I missing something?
Thanks for ANY help!
Patrick

The first is that I can't view the aperture library anymore directly from iphoto.
THat is exceeding strange since iPhoto '08 could not open or share an Aperture library - that ability was first introduced in iPhoto '11 - with the latest version of iPhoto and or Aperture you can open the same library with either application - http://support.apple.com/kb/HT5043
In the current version of iPhoto the photos are sorted by date in the film strip - I've not recently done a calendar so do not remember the specifics -
LN

Issue with Date and Time Picker on Windows 8.1 and Office 2013

We are having a issue with the Developer tool in Excel called the Date and Time Picker which puts a calendar field into the spreadsheet where you can select a date from the calendar popup
If we change this date field and then save and close and reopen it reverts back to the previous date before the change was made
If we do the same process on a Windows 7 machine with Office 2013 it saves the changes we made to the Date and Time picker field

Hi jdono2,
I'm using Windows 8 and Office 2013,and I can't reproduce this issue.
Please make sure you have already upgraded to the latest version of excel, try to reregister the MSCOMCT2.OCX.
Also you can try to use another date picker add-in to test this issue.
http://social.msdn.microsoft.com/Forums/office/en-US/36f83f24-cd76-4f8e-aa7b-5f166666e7d3/excel-2013-popup-calendar?forum=exceldev
Wind Zhang
TechNet Community Support

CRYSTAL REPORT GRAPH WITH DATE AND TIME

Post Author: Dino Dentone
CA Forum: Charts and Graphs
Dear forum,
I am developing a Visual Studio .net 2005 Windows Form,i have a sql table with 2 field:1) DATA (date and time)2) Temperatura (numeric)I have to make a line graph with numeric data axes.I have insert two parameters' to customize the filtering, so i can have a graph of the temperature between to date and time.If i choose two date's and time (parameters) like 20/04/2008 00:00:00 trought 20/05/2008 00:00:00 i have no problemBut if a choose a range minor of 1 day (some hours like from 15/05/2008 00:00:00 trought 15/05/2008 08:00:00) i have no graph.It sound like it don't use the time values?Thank's for the Help.

There is some debugging info on the website. I've had problems getting the text to work. It was generally that I installed either the wrong 'version' of ImageMagick (the recommended one works for me--I'm running Vista x64 and one time installed the x64 version and it didn't work). I also installed Ghostscript to get the font list to work correctly. At one time I installed the x64 version of Ghostscript and it didn't work with the plug-in, either.
I installed two items:
ImageMagick: ImageMagick-6.4.9-3-Q16-windows-dll.exe
Ghostscript: gs863w32.exe
I don't know if it is necessary but I also added the fonts from
ghostscript-fonts-std-8.11.tar.gz to the c:\Program Files (x86)\gs\fonts directory. Some, none, perhaps all, may already be installed just by installing ghostscript--it has been so long that I don't remember exactly. I do know that the contents of the gs fonts directory contains all the files in the .gz, I just don't remember if I put them there separately or as part of the gs install :)
You need to make sure the font size is large enough. I usually use about 2-4% of height and export a single photo to make sure I see the text correctly.
Tim does respond to email when he can so if you can't get it to work you can always drop him a line.

Script to find locks in Database with Date and time.

Hi all,
I used to have a script which i have lost now due to a recent laptop crash. This script used to find locks in the database.. along with the date and time since when it is locking the session.
It was quite a comprehisive one. I think i found it on this forum only, but not able to find it now. Can someone please help me find one such comprehensive script.
Currently I am using this script.. which is also good.. but does not have the date and time stamp on it. Is there something better.?
SET LINESIZE 165
SET PAGESIZE 66
COLUMN oracle_user     FORMAT a15      HEADING 'Oracle User'
COLUMN usercode        FORMAT a12      HEADING 'SID/Serial#'
COLUMN os_user         FORMAT a10      HEADING 'O/S User'
COLUMN program         FORMAT a25      HEADING 'Program'
COLUMN mode_held       FORMAT a15      HEADING 'Mode Held'
COLUMN mode_requested FORMAT a15      HEADING 'Mode Requested'
COLUMN lock_type       FORMAT a15      HEADING 'Lock Type'
COLUMN object_name     FORMAT a30      HEADING 'Object Name'
COLUMN lock_time_min   FORMAT 999,999 HEADING 'Lock Time (min)'
SELECT
s.username                                 oracle_user
+, l.sid || '/' || s.serial# usercode+
+, s.osuser os_user+
+, s.program program+
+, DECODE(l.lmode,+
+1, NULL,+
+2, 'Row Share',+
+3, 'Row Exclusive',+
+4, 'Share',+
+5, 'Share Row Exclusive',+
+6, 'Exclusive', 'None') mode_held+
+, DECODE(l.request,+
+1, NULL,+
+2, 'Row Share',+
+3, 'Row Exclusive',+
+4, 'Share',+
+5, 'Share Row Exclusive',+
+6, 'Exclusive', 'None') mode_requested+
+, DECODE(l.type,+
+'MR', 'Media Recovery',+
+'RT', 'Redo Thread',+
+'UN', 'User Name',+
+'TX', 'Transaction',+
+'TM', 'DML',+
+'UL', 'PL/SQL User Lock',+
+'DX', 'Distributed Xaction',+
+'CF', 'Control File',+
+'IS', 'Instance State',+
+'FS', 'File Set',+
+'IR', 'Instance Recovery',+
+'ST', 'Disk Space Transaction',+
+'TS', 'Temp Segment',+
+'IV', 'Library Cache Invalidation',+
+'LS', 'Log Start or Log Switch',+
+'RW', 'Row Wait',+
+'SQ', 'Sequence Number',+
+'TE', 'Extend Table',+
+'TT', 'Temp Table',+
l.type)                                 lock_type
+, o.owner || '.' || o.object_name+
+|| ' - (' || o.object_type || ')' object_name+
+, ROUND(l.ctime/60, 2) lock_time_min+
FROM
v$session     s
+, v$lock l+
+, dba_objects o+
+, dba_tables t+
WHERE
l.id1            = o.object_id
AND s.sid            = l.sid
AND o.owner          = t.owner
AND o.object_name    = t.table_name
AND o.owner          <> 'SYS'
AND l.type           = 'TM'
ORDER BY
+1+
+/+

What Brian said is true so are your sure your query was not just reporting the start time of the current transaction from v$transaction.start_time, or the start time of the session: v$session.logon_time, or perhaps the time since the last database call (v$session.last_call_et) which for an active session would be the time the current SQL statement has been running?
HTH -- Mark D Powell --

Need help for Flash quiz with score and timer

Greetings, I need to urgently create a flash
game with 10 questions, 3 answers per question. At the end of the
quiz I need to get the time the quiz was completed for, what answers the player answered correctly and the time its completed into a database, + a couple of fields like name and phone that the user fills also needed to be added into db with the score and time. I need it by the end of tomorrow and I do realise i dont have the knowledge to make it, So if there is anyone that wishes to help or trade services I can give you back the favour by creating some html/css/web design content for you. Thanks in advance and please excuse me for my terrible english.

download flash cs6 and use it to publish your ad or expand flash cc's publishing capabilites. if you have a flash cc subscription you can download and use flash cs6 after logging into your cc acount.
here's how to expand publishing capabilites of flash cc: http://forums.adobe.com/message/5511080#5511080#5511080

Getting the date along with day and time on top right of sreen

I know this sounds stupid, but I can' get the date to show up on the top right hand corner of screen to the left of the speaker icon. With tiger I had a facsimile calendar with the date and time of day on the bottom of my screen next to dock. Very nice. That disappeared with intro of Leopard ... any advice will be welcome. Steve in Phoenix

This is the standard function and features of the menubar clock in OS X 10.3 thru 10.5.
You will need to find a third party application to do what you wish.

Connection with iMac and Time Machine VERY slow

People
For the past of couple of days the connection with my iMac and Time Capsule has gone askew. The iMac shows the wireless connection at 5GHz with a transmit rate over 200. However, internet is slow and backing up about 300mb is in its 24th hour and it's only reached 180mb.
I don't understand what may have happened. The two machines have been best mates for a long time and now something's gone wrong. The only thing I did a couple of days ago is install the Update for the Apple Magic Mouse.
On the other hand, my MacBook, which also have the Magic Mouse update, has not trouble with internet speed - wireless, once again - and the Time Machine backups are happening without a hitch.
I bit the bullet and turned off the Time Machine and rebooted it. Unfortunately, it's made no difference.
Does anybody have any suggestions?

Both your 5 GHz band and the guest band have the same SSID unless you have assigned separate names to them. I think it's much easier to identify them if they have separate names of your choice.
If you have a separate name for the guest 2.4 GHz band, click on the Airport icon at the top of your screen and then click "Join other network". The 2.4 GHz band should appear as a choice and you can connect to it.
I'm using Leopard, not Snow Leopard so I don't know if things display the same way on our operating system. If you want your computer to connect to a given network:
Click System Preferences, then Network.
Click the AirPort connection on the left and then click the Advanced button at the lower right. You can drag the network that you want your computer to connect to first to the top of the list.

Name of the file (in utl_file) with date and time

Instead of the below:
vHandle1 := utl_file.fopen('/home/oracle/testdir', 'test.csv', 'W');
I want something like this:
vHandle1 := utl_file.fopen('/home/oracle/testdir', 'test19dec200611.35.csv', 'W');
i.e the name of the file should have the date and time too so that every time the original is not overwritten.
Is this possible?

OR maybe we can use this:
utl_file.frename('/home/oracle/testdir','test.csv,'/home/oracle/testdir','test'||to_char(sysdate,'DDMONYYYYHH24:MI')||'.csv',TRUE);
Will it work?
Can we download this file and open it through oracle (and not any front end like ASP etc.)

Create a folder with date and time

hey yall. i'm working on a program to assign files to a created directory. for the sake of organization, i want to create a folder that is the date and time it was created. (ie c:\\new\\02-Jun-2008\\file.txt) i know i'm missing something. here's the code i have so far to create the folder:
Format formatter;
Date date = new Date();
formatter = new SimpleDateFormat("dd-MMM-yy_hh:mmaaa");
String s = formatter.format(date);
String path = "C:\\new\\";
String destination = path + s;
File d = new File(destination);
d.mkdirs();
i know its trivial for any advanced user but im only a student and any advise or useful links are great. i'll keep searching in the meanwhile. thanx.

got it myself. failed to remember NO : are allowed in windows. <sigh>

Working with data and time

Hi,
I want to know how can i access server date and time and
display it in my flex page on a label
plz help me finding solution
regards
Rajeeva

Hi,
I want to know how can i access server date and time and
display it in my flex page on a label
plz help me finding solution
regards
Rajeeva

Need help with date and time calculations please

Hello there.. Im stuck, and im hoping someone can help..
Working on a list to manage and track PTO. User completes PTO request form,
Fields
Name
Start Date (with time)
End Date (with time)
Total Number of Days/hours requested: (calculation)
Full Day: (Yes/No)
ok business need
user has the ability to request a certain number of hours as opposed to a full day.
After searching around on google. I found this calculation to help me figure out how many BUSINESS days being requested.
=IF(ISERROR(DATEDIF([Start Date],[End Date],"d")),"",(DATEDIF([Start Date],[End Date],"d"))+1-INT(DATEDIF([Start Date],[End Date],"d")/7)*2-IF((WEEKDAY([End Date])-WEEKDAY([Start Date]))<0,2,0)-IF(OR(AND(WEEKDAY([End
Date])=7,WEEKDAY([Start Date])=7),AND(WEEKDAY([End Date])=1,WEEKDAY([Start Date])=1)),1,0)-IF(AND(WEEKDAY([Start Date])=1,(WEEKDAY([End Date])-WEEKDAY([Start Date]))>0),1,0)-IF(AND(NOT(WEEKDAY([Start Date])=7),WEEKDAY([End Date])=7),1,0))
This works great as long as its a [Full Day]="YES", displays results in column labeled Number of days
now if [Full Day]="No", displays results in column labeled Number of Hours
BUT this is my issue (well part of it) it calcuate the correct number of hours.. but puts a "1" in "Number of Days" why.. dates have not changed.. I think Its something with the above calculation but I could be way off.
the end result is I need number of days to concat with number of hours
i.e 1 full day 4 hours 1.4
0 full day 5 hours 0.5
1 full day 0 hours 1.0
so that the total can be deducted via workflow.. from the remaining balance in a tracker. (seperate list)
Any angels out there??

Posnera-
Try changing time zones and see if the travel itinerary times change.
Fred

2 external hard drives with iTunes and Time Machine

Hi folks.
My 160gb hard drive on my iMac is full so I've bought 2 x 1tb external hard drives, my plan being to move my iTunes library to one of them (as this uses the majority of space) and run it from there and use the 2nd hard drive with Time Machine.
My question is this, will Time Machine backup any changes to my iTunes library if it isn't on the computer's internal hard drive?
Thanks!
Brian

Just be sure the iTunes volume is formatted +Mac OS Extended (Journaled).+ Most drives come formatted for Windoze, and TM can't back them up.
See #1 in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html] (or use the link in *User Tips* at the top of the +Using Snow Leopard+ forum) if you need to reformat and aren't sure how.

CTM with Inbound Quota..with demand and time split

Similar Messages

Maybe you are looking for