Ctrl alt ins

How can I ctrl alt ins on an MBA? Need this function to open an PC via remote desktop.

Thanks--that did not do the trick but I was able to correct in the remote product.
Thank you.

Similar Messages

When I close firefox with ctrl-alt-delete, I want to start over on Firefox, I usually do this when too many tabs and windows are open. However, Firefox always restores the tabs and windows I previously had. How can I stop that from happening?

This happens when FireFox is not responding, and I want to close firefox with ctrl-alt-delete. Too many tabs can make Firefox crash. That is why I want to use ctrl-alt-delete to close FireFox. I tried finding a way to disable this, but I found no option to.

Ending the Firefox program or process with the Windows Task Manager "looks like" a crash. The proper way to exit Firefox is click Firefox button > Exit (or File > Exit, if using the Menu Bar).
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Firefox freezes about five seconds after I open it, and whenever I use Ctrl+alt+delete to close it I get told that it is waiting for a response from me.

I am having a problem with Firefox. Whenever I open it, it runs fine for about five seconds and then freezes. A small white rectangle appears in the upper left corner of the browser window. The screen still scrolls fine, but whenever I try clicking on anything (including the menus in the toolbar), it just gives me an unresponsive 'ding' sound. When I try closing the programme with Ctrl+alt+delete, I get a message saying 'The system cannot end this programme as it is waiting for a response from you'. I originally had this problem with an earlier version of Firefox and tried installing Firefox 4 to see if this helped. It worked for two days and began doing it again. I have already tried un- and re-installing Firefox and restarting my computer, and Firefox will not run properly for long enough to let me disable any add-ons or plug-ins. What can I do to fix this?
I've added a couple of screencaps of the problem. (or tried to)
[http://i53.tinypic.com/161hvh2.jpg The white rectangle]
[http://i51.tinypic.com/dwsq1.png Error message]

Have also since found out that to start FF4 in safe mode you just hold shift whilst double-clicking the icon. We only find these things out after the event, murphy's law!

CTRL + ALT doesn't resize my brush anymore !!!! :'(

Hi everyone !
I'm using OSX 10.8.2 and Photoshop CS6, with an intuos 4, and 10 minutes ago the function CTRL+ALT+left or right on my intuos was visually changing the size of my brush, and now, when I use the same combination, it just drags my photoshop window and move it from left to right...!
I can't remember changing anything in the options of my intuos or Photoshop, and make the settings back to defaults doesn't change my problem.
If you have any answer, clue, tip, or anything helpfull, I'd be sooooooo glad !!
thanks !!

Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Ctrl-Alt-Backspace Again.

I couldn't be bothered to fix this at the time and need to fix it now.
I have followed the Xorg wiki page to the letter concerning DontZap adding the line to keymap etc but still cannot use ctrl-alt-bksp.
Is there a particular place I should be adding the line for the keymap file?
Please help me for my sanity

Xorg log looks ok to me but i'm not a pro on such matters im afraid.
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux Arch 2.6.30-ARCH #1 SMP PREEMPT Fri Jun 19 21:25:17 UTC 2009 i686
Build Date: 28 June 2009 11:20:52AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 5 20:42:48 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(**) Option "DontZap" "False"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x640
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0407:1028:0228 nVidia Corporation GeForce 8600M GT rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 185.18.14 Wed May 27 03:09:07 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 185.18.14 Wed May 27 02:32:54 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 8600M GT (G84) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 60.84.50.00.02
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8600M GT at PCI:1:0:0:
(--) NVIDIA(0): Seiko (DFP-0)
(--) NVIDIA(0): Seiko (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): Seiko (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event10"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(**) Option "SHMConfig" "false"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "VertScrollDelta" "100"
(**) Option "HorizScrollDelta" "100"
(**) Option "VertEdgeScroll" "true"
(**) Option "HorizEdgeScroll" "true"
(**) Option "CornerCoasting" "true"
(**) Option "VertTwoFingerScroll" "true"
(**) Option "HorizTwoFingerScroll" "true"
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(**) Option "MinSpeed" "0.10"
(**) Option "MaxSpeed" "0.60"
(**) Option "AccelFactor" "0.0020"
(**) Option "CoastingSpeed" "0.30"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) Option "AlwaysCore" "true"
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"

Tried installing Windows Vista, cancelled install and now it won't boot from the OEM Vista DVD, all i get is BOOTMGR is missing error... Ctrl Alt Del to restart and when i turn the computer on i get a blank screen and pressing C is not working to boot....

Topic says it all...
My friend started a installation of Windows Vista, but pulled out after deleting all partitions...
So now i power it on, get a blank screen (seems a bit gray because of backlighting, should show the apple logo right?)...
Then after like 15-20sec it will throw out a:
BOOTMGR is missing
Press Ctrl+Alt+Del to restart
I have a OEM Windows Vista DVD in the drive, and i know... Windows 7 is better... but i'm not that fond of stealing software from Microsoft and i have 10 licenses for Vista...
I have tried pressing C while booting up but it doesn't work...
Does anyone here have a magic soloution for me, and no i will not install MacOS on it !!!

Deleting Boot Camp partitions the conventional way will not work . You must use the Boot Camp Assistant to remove a Boot Camp partition. Here is a link to the guide.
http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_10.6.pdf
The way to restart is to hold down the option/alt key during startup* and then selecting the Mac OS. If you have a valid Boot Camp install of Windows it would show up during this type of start up.
* hold down immediately after pressing the power button and until the OS choice screen appears.
To summarize.
1 Use the above method to boot into Mac OS.
2 Download the instructions and read them.
3 Use Boot Camp Assistant to remove the partition.
4 Pick your friends more carefully.

Revolve 810 G1 Unlock Computer when in Tablet Mode. Press CTRL-ALT-DEL or Windows Security Button

1. I have an Revolve 810 G1
Running Windows 7 Pro (64 Bit).
When I change the screen to Tablet Mode
(Folding tablet over keyboard and using as tablet).
I lock my computer.
2. What to know how to unlock without having to Open back up and use the CTL-Alt-DEL keys.
When Locked screen shows: Press CTRL-ALT-DEL or use the Windows Security Button to unlock this computer.
I would like to use the Windows Button on the bottom of the screen
(One Used in Windows 8 to change between Desktop and Metro) to Unlock screen And bring up on screen keyboard to put in my password.
This is probably how it should work, but it does not work.
Even bringing up the onscreen keyboard via the blue power button On the screen to Ease Of Access does not work.
The CLT-ALT-DEL on the on screen keyboard will not unlock the screen.
P.S.
Where is that Windows Security Button when you need it?
Thanks,
Rog

If you are using Windows 7 (not Windows 8), you should be able to touch the Ease of Access button at the lower left of the screen, then select Type without the keyboard (On-screen keyboard). When the on-screen keyboard pops-up, press CTRL, then ALT, then DEL. You should get a password prompt; the on-screen keyboard will stay visible unless and until you close it.
Although I am an HP employee, I am speaking for myself and not for HP.
Please click the little thumbs-up dealybopper to the lower right if my reply was helpful to you. Please mark Accept As Solution if it solves your problem. This will help others, too!

Ctrl Alt Del and Task manager not working

Hi, Ive been having a problem getting task manager to run at all. On a fresh reboot, if I use the ctrl alt del function the according screen will come up like normal, and I will click on task manager. It bring me back to my desktop and nothing pops up.
Its not running in my task bar or anything. Then if I try to use the ctrl alt del function again, nothing happens. Ive tried running task manager straight from the start menu, but then I get an error saying that the version of that file is not compatible with
the version of windows I am running, which is 64 bit W7. It just started happening on my system a few days ago and I have changed nothing the past few days. I have tried to do a system restore, but to my idiocy, I did not know I needed to manually create restore
points. So I can only restore to yesterday which would fix nothing. I have run antivirus and anti spyware programs and they have shown no problems and my hard drive only has a 1% disk fragmentation. Is there a way to uninstall and re download a 64 bit compatible
version of the windows 7 task manager? Or is there a separate reason why it is not working? Thankyou

Also try it By Registry Editor :
Start --> Run --> regedit --> ok
Then
Hive: HKEY_CURRENT_USER
Key: Software\Microsoft\Windows\CurrentVersion\Policies\System
Name: DisableTaskMgr
Type: REG_DWORD
Value: 0=Disablethis key, that is Don't Disable, Enable TaskManager
Regards,
MCP | MCTS | MCITP
The first fix did not work, I tried doing the second one but there is no system folder in
Software\Microsoft\Windows\CurrentVersion\Policies\
The only one its showing is an explorer folder.

Ctrl/Alt Keys not Working in Parallels

Hi,
I'm running Illustrator CS6 using Parallels Desktop 8 and Windows 7. It appears that the ctrl/alt keys do not work. Has anyone found a solution? I've tried resetting my preferences and restarting my computer. Any help would be greatly appreciaed.

Although this is an old thread, I also seem to be having the same sort of issues with Illustrator CS2 in Snow Leopard running under Parallels Desktop 9.
Re. the proposed solution, there does not seem to be a 'Virtual Machine -> Configure -> Options -> Advanced -> Optimize modifier keys for games' option in Desktop 9 - or I've not found it.
I will pursue this in the Parallels forums, but if anyone here has found a solution, I'd be interested to hear it.

What happens to a mail item, Fn-Ctrl-Alt-Del is pressed

What happens to a mail item, when Fn-Ctrl-Alt-Del is pressed while in the mail tool? I can't seem to find the email file anywhere.
Is there a way to disable this key pattern in the mail program?

What happens to a mail item, when Fn-Ctrl-Alt-Del is pressed while in the mail tool? I can't seem to find the email file anywhere.
Looks to me like I permanently deletes the message.
Is there a way to disable this key pattern in the mail program?
Is this really a key combination you find it easy to press by mistake? To answer the question, no, it doesn't look like you can remap that, but note that if you choose Edit -> Undo immediately after deleting, the message will come back.

Firefox 9.0.1 keeps hanging once I access a website with video, when I write e-mails etc. If a press ctrl+alt+del, opens a window to confirm closing, and firefox works again. When I close that confirm window, firefox immediately hangs again.

It stops working if I access websites with videos, and all sort of more complex flash. It I try to write an e-mail, it also stops. I can't do anything. PC keeps working, though. So I press ctrl+alt+del. It opens that window asking if you want to close all the tabs. I notice that firefox start to work again, behind that window. But, once I close the window, it stops again. Sometimes I can close the tab with the video before it hangs again, which can take a few ctr+alt+del's. It doesn't happen with other browsers! It started 1 week ago. Is it an extension? Or a virus (i use avast)? Thank you!

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
* [[Managing the Flash plugin]]
Check and tell if its working.

How can I disable ctrl+alt+del and other keys

I need help on how to disable some keyboard key combinations (ctrl+alt+del)in particular. Disabling other keyboard keys is equally welcomed.
Also how can I disable Windows 2000/XP's Task Manager from exposing my running program to be terminated.
Thanks

I need help on how to disable some keyboard key
combinations (ctrl+alt+del)in particular. Disabling
other keyboard keys is equally welcomed.This is not a java question per se. I would recommend searching on MSDN or some such site to figure this out.
Also how can I disable Windows 2000/XP's Task Manager
from exposing my running program to be terminated.This can be done by limiting the permissions of the Windows user that you would like to prevent from doing this. The user manager lets you do this.
>
ThanksNo problem.

Is there a way to open a second firefox instance using a shortcut key (i.e. Ctrl + Alt + 9), while a first instance is already running?

This happens both in Windows XP and Windows 7. Firefox is the only application that does not allow this consistently (this works with MS-Word, Google Chrome, Notepad etc.).

Yes, but {Ctrl + N} is useful only when you are already in Firefox. I meant quickly launching Firefox while using another application via a user-assigned shortcut key. For example, I am writing a text in MS-Word and I want to run a quick Wikipedia search; now, if Firefox is already running in the background, my shortcut for Firefox (e.g Ctrl + Alt + 9) won't do anything - it will only launch Firefox, if it is the first Firefox window to be opened. Thanks anyway though!

After navigating (sometimes downloading pictures, sometimes not) for approximately 10 minutes, I can no longer see contents of drop down menues, then Firefox freezes up and I have to use Ctrl/Alt/Delete to end my internet experience.

After navigating (sometimes downloading pictures, sometimes not) for approximately 10 minutes, I can no longer see contents of drop down menus, then Firefox freezes up and I have to use Ctrl/Alt/Delete to end my internet experience.
== This happened ==
Every time Firefox opened
== After upgrading to 3.6

Step by step, how did you arrive at seeing this agreement?

[Solved] Ctrl + Alt + F[1-6] -- no signal on display

02/04/13 I made a full system update. When turned off my PC, I noticed that screen is turned off before the system is actually halted. Well, this didn't made me suspicious.
However, today I decided to make a full update with new KDE. I thought that it'd be rational to do it from the virtual console but pressing ctrl + alt + Fx causes my monitor to turn off. Have I missed something?
[mk@linux ~]$ systemctl list-units --type=target
UNIT LOAD ACTIVE SUB DESCRIPTION
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
printer.target loaded active active Printer
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
13 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
[mk@linux ~]$ pacman -Qs nvidia
local/lib32-nvidia-304xx-utils 304.84-1
NVIDIA drivers utilities and libraries. (32-bit)
local/libcl 1.1-3
OpenCL library and ICD loader from NVIDIA
local/libvdpau 0.6-1
Nvidia VDPAU library
local/nvidia-304xx 304.84-1
NVIDIA drivers for linux, 304xx legacy branch
local/nvidia-304xx-utils 304.84-1
NVIDIA drivers utilities and libraries, 304xx legacy branch
Last edited by mkkot (2013-04-07 17:31:25)

It's a known problem with the nvidia 304.84 driver; so update it to 304.88 and from some users' testimonies it should work again. (I use nouveau presently so I cannot say myself).

Ctrl alt ins

Similar Messages

Maybe you are looking for