Ctrl-Clic combination not working

Hi!
I'm developing dashboards in Oracle BPM Studio 10.3.1, in the properties tab I selected a method on the onClic property, but when the user clics twice on the graphic it shows a gray screen and the user has to exit the screen and excecute the global activity again.
So I change it to ctrl-clic but nothing happens... Is there anything that I have to enable to make it works?
Thanks
Ana

Hi ,
Just try and decrease the Code insight Pop up speed to less than .3 secs. This might resolve your problem.
Even I had the same problem and listed under thread
----Re: SQL Developer 2.1 not showing hints/object list on key Stroke
This will work if you are facing the same issue.
Edited by: user10315959 on Jan 7, 2010 11:25 PM

Similar Messages

I have a macbook air and I can't cut and paste in itunes. The right clic does not work. How can I work this out?

I have a macbook air and I can't cut and paste in itunes. The right clic does not work. How can I work this out?

Great tip Stephen!!
I was so frustated from this issue that I used to use Windows iTunes for mass editing info, adding Lyrics etc and then transfering songs to Mac. This tip has alleviated my pain!!
Thanks for the tip. This question should be tagged as answered.

I cannot past with the lastest version. CTRL V does not work either

I cannot past with the the most recent version released today. CTRL V does not work either
== This happened ==
Every time Firefox opened
== When my system updated the newest version today

Issues with the right-click context menu not working can be caused by the [http://toolbar.yahoo.com/ Yahoo Toolbar] (Tools > Add-ons > Extensions)
See:
[[Troubleshooting extensions and themes]]
http://support.mozilla.com/en-US/forum/1/380010
https://support.mozilla.com/en-US/forum/1/552540?
https://support.mozilla.com/en-US/forum/1/472971
Also see:
https://support.mozilla.com/en-US/kb/Clipboard+not+working
http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings
http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. ~~red:1.5.0_02 (very old)~~; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates. Allow the download/update to occur. If you use this method, no need to proceed with the instructions below, '''but''' do look at the two bulleted items at the bottom "'''NOTE for IE:'''" and "Also see:". Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

Ctrl+Z does not work in Forms 11g on Windows (undo function)

In Oracle Forms 11g on Windows, the undo function, ctrl+Z does not work as it did in Forms 6i.
The ctrl+C and ctrl+V (copy/paste) work fine.
I looked into the Forms key mapping resource file and no solution there.
Thanks

I'm not sure what functionality you believe you had previously, but UNDO does not have any automatic functionality built-in. This is clearly explained in the Builder Online Help. Here is some of that text. Notice carefully what it says about "Undo":
<blockquote>Magic Item Property
<blockquote>Description_
Specifies one of the the following predefined menu items for custom menus: Cut, Copy, Paste, Clear, Undo, About, Help, Quit, or Window. Magic menu items are automatically displayed in the native style for the platform on which the form is being executed, with the appropriate accelerator key assigned. Cut, Copy, Paste, Clear, Window, and Quit have Built-in functionality supplied by Oracle Forms, while the other magic menu items can have commands associated with them.
Usage Notes_
The following settings are valid for this property:
Cut, Copy, Paste, Clear
These items perform the usual text-manipulation operations. Oracle Forms supplies their functionality, so the designer may not enter a command for these items.
Undo, About
These items have no native functionality_, so the designer must enter a command for these items. Any type of command can be used for these items, except Menu.
...</blockquote>
</blockquote>

Ctrl key is not working

ok I recently bought a used laptop and threw arch linux on it and eventually got everything working correctly. However the ctrl button does not work which each means I can't run awesome commands like ctrl+c and ctrl+d. The best way I have found so far to work around this problem is to use stty to bind commands to some other key. For example stty "somekey" erase. I would like to map the ctrl key to the alt key or possibly the windows/power key.
How would I look up the symbols for alt and windows/power so that I can use alt or windows/power as ctrl?

Mr.Elendig wrote:I would rebind caps-lock to ctrl.
thats cool, I actually found out how to do that in virtual console. I simply switched the keyboard layout to emacs. I'm still having problems changing the keyboard layout in xfce though.
RADIO EDIT:I actually found out how to change the keys in X using Xmodmap. I think I write a wiki article about this...
Last edited by Hilariousity (2009-07-23 08:28:17)

Undo or CTRL-Z does not work in an item with an lov

When you change a required item of a record and this item has an LOV behind it. The required item is not validated. Because it's not validated no changes are seen by the item. So your changes can't been undone. In oracle forms the CTRL-Z combination works for the item, in the headstart demo application the CTRL-Z doesn't work and the undo button is not enabled.
The example of the multi-select LOV in the headstart demo-application (form hsd0012f) has the same problem. When you make the id item empty, you can't undo the changes.
How can I undo the changes?

Is there a way to undo the changes? What work-around can the developer add to make the undo work.

Ctrl/Alt Keys not Working in Parallels

Hi,
I'm running Illustrator CS6 using Parallels Desktop 8 and Windows 7. It appears that the ctrl/alt keys do not work. Has anyone found a solution? I've tried resetting my preferences and restarting my computer. Any help would be greatly appreciaed.

Although this is an old thread, I also seem to be having the same sort of issues with Illustrator CS2 in Snow Leopard running under Parallels Desktop 9.
Re. the proposed solution, there does not seem to be a 'Virtual Machine -> Configure -> Options -> Advanced -> Optimize modifier keys for games' option in Desktop 9 - or I've not found it.
I will pursue this in the Parallels forums, but if anyone here has found a solution, I'd be interested to hear it.

CTRL+shift+t not working in Ubuntu 14.04

Suddenly CTRL+shift+t (for undo close tab) not worked!
I try
browser.sessionstore.max_tabs_undo: 0
browser.sessionstore.max_windows_undo: 0
and
sudo chown $USER:$USER ~/.mozilla/firefox/ -R
But still my problem exist. Could you please help me to solve this problem? Firefox ver 36.0

If you set the prefs to 0 then you disable this feature and you won't be able to restore a closed tab or window.
To make this work these prefs need to have at least a value of 1.
* browser.sessionstore.max_tabs_undo: 10
* browser.sessionstore.max_windows_undo: 3
Do you see any items listed in "History > Recently Closed Tabs/Windows" after closing a tab?
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Ctrl+tab is not working in editing mode

I have JcheckBox and JTable in my JPanel. When user clicks or presses F2 to edit any cell value of the JTable a comboBox will appear with possible values. (This comboBox is coming from table CellEditor). When user presses ctrl+tab from the table focus should transfer to JComboBox all time. It is working only when the user presses ctrl+tab from the table cell which is not in editing mode. If the user presses ctrl+tab from the table cell which is in editing mode (i.e. focus is on the ComboBox of the cellEditor) it does not work. Please help me to find the solution.
I give a sample code here for your reference.
public class Frame1 extends JFrame {
public Frame1()
super();
this.setLayout( null );
this.setSize( new Dimension(400, 300) );
JTextField ch = new JTextField();
ch.setVisible(true);
ch.setBounds(10, 10, 10, 10);
this.add(ch, null);
DefaultTableModel tmodel = new DefaultTableModel(3, 1);
tmodel.setValueAt("0 0 1",0,0);
tmodel.setValueAt("1 0 1",1,0);
tmodel.setValueAt("2 0 1",2,0);
JTable custLayersTable = new JTable(tmodel);
custLayersTable.getColumnModel().getColumn(0).
setCellEditor(new ComboEditor());
custLayersTable.setBounds(new Rectangle(40, 40, 280, 145));
custLayersTable.setSurrendersFocusOnKeystroke(true);
this.add(custLayersTable, null);
public static void main(String[] args)
Frame1 a = new Frame1();
a.setVisible(true);
final class ComboEditor extends AbstractCellEditor
implements TableCellEditor
public Component getTableCellEditorComponent(JTable table,
Object value,
boolean isSelected,
int row,
int column)
Vector<String> layerValSet = new Vector<String>();
for(int i=0; i<3; i++)
layerValSet.add(row+" "+column+" "+i);
mComboModel = new DefaultComboBoxModel(layerValSet);
mComboModel.setSelectedItem(value);
mEditorComp = new JComboBox(mComboModel);
return mEditorComp;
public Object getCellEditorValue()
return mEditorComp.getSelectedItem();
private DefaultComboBoxModel mComboModel;
private JComboBox mEditorComp;
}

Thanks a lot for your reply.
Since the textField is in a different class i could not use the transferFocus API directly. I tried the following code in the keyreleased event of Combo Box but it was not working.
KeyboardFocusManager.getCurrentKeyboardFocusManager().focusNextComponent(
e.getComponent().getParent());
I also tried the following code in stopCellEditing and is not working.
KeyboardFocusManager.getCurrentKeyboardFocusManager().focusNextComponent();
Is there any other way to achieve this?

Ctrl+Tab and Ctrl+F6 still not working in Excel 2013?

I am using Windows 7 64-bit. I just switched to Office Home & Business 2013 (32-bit), and I discovered that ctrl+tab behavior in Excel 2013 is incredibly broken.
If you are using any other programs concurrently with Excel, then it makes switching tasks through ctrl+tab impossible. Switching workbooks in this way has unpredictable behavior: often, Excel will switch to a workbook that is hidden behind other windows
(fails to foreground the window correctly). Even when it appears to be switching appropriately between windows, the order of switching is wrong: rather than cycling through all windows, it seems to switch between workbooks somewhat randomly.
See similar issues discussed here: https://social.technet.microsoft.com/Forums/office/en-US/f288d91d-835a-48c4-a39c-738ca05002c4/ctrltab-and-ctrlf6-not-working-properly-in-excel-2013?forum=officeitpro
and here: http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/cycling-between-open-windows-using-ctrlf6-or/7314b632-7f48-44f1-8e96-7d7000ac86d8
There does not appear to be any solution to this issue so far. I have attempted to repair my installation of Microsoft Office, but it did not correct the problem.

Hi Dlup12345,
Based on my testes with local environment (Windows 8.1 and Excel 2013:15.0.4675.1000), the two Keyboard shortcuts worked as expected. In my view, this issue might be occur with Keyboard shortcuts, because you said the issue occurred intermittently. If we
only open multiple Excel files without other program, the shortcuts should worked fine. Please check if other program affected Excel shortcuts.
If you have any update, please feel free let us know.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Hotkey (Ctrl+B) is not working after migration from Forms 6i to 10g

Dear Gurus,
Need your help regarding the following problem:
After migrating from Forms 6i to 10g (Rel 2), Ctrl+B (used to list the blocks in a form) hotkey is not working anymore (all other hotkeys are working fine). I've checked my FMRWEB.RES and it contains an entry for Ctrl+B:
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
Additional Information:
OS: AIX
NLS_LANG = UTF8
fmrweb_utf8.res also contains the same text for Ctrl+B as above.
I tried to reproduce it on my Windows Machine (with NLS_LANG set to AMERICAN_AMERICA.WE8ISO8859P1) and its not working as well. I don't have right to put move files on AIX server but i can try anything (on my local system) suggested by the Oracle gurus.
Best Regards,

Dear Gerd,
"are you sure, that it is the hotkey"
Yes, i am dead sure. Since:
(1) It was working fine in forms 6i
(2) If you run a form and select Help => Keys, you will see Ctrl+B on the top of list
The problem is its not taking into account the keys which i am defining in the file (although i am following the same procedure detailed on metalink.oracle.com).
Regards

Ctrl+Right Click not working

Hi all,
I am using EP version 6.4 and ESS/MSS 100 SP 22. Backend system is ECC 5.0 and SAP-HR/EA-HR SP75.
I am unable to do end user personalization in the portal iviews. Ctrl+Right Click is not working. Any idea whether this works on this version or not?
Thanks

Webdynpro Personalization is a feature available from EP 7.0.
I don't think it will work in EP 6.0 versions.
Thanks,
Shanti

Command, option, ctrl, fn keys not working

thanks to a visiting dog who got tangled up the power adapter my laptop ended up on the floor, wide open with the keyboard popped out. I have inspected the connector cable and it looks OK to the naked eye. I disconnected the keyboard cable and re-connected.
When using an external USB keyboard all keys function normally. When using the built-in keyboard the only keys not working are the command, option, ctrl and fn keys. I have restored modifier keys to default (I had never changed them) but this did not help. I also toggled the "use F1-F12 to control..." option in the keyboard preferences to no avail and have restored keyboard shortcuts to no avail.
Is my keyboard shot? Is the a pref file I might delete?

Hi, Mel. If the external keyboard works properly, I'm afraid you have to figure your built-in KB has been dogged to death. I hope the pet owner will do the right thing by you. I also hope the KB is all that was damaged. How are your adapter cord, plug, and DC-In port? Does your battery still charge OK?
Whenever anything visits my house that's active, inattentive, and built low to the ground, my Powerbook runs on battery power only. I haven't seen one yet, but the new magnetically-connected, easily- and harmlessly-detached MacBook Pro AC adapters sound like a superb idea to me. Too bad our PBs can't use 'em.

Shortcut key Ctrl+L does not work. How to fix it?

In my Photoshop Elements 9 and Photoshop Elements 11, The shortcut key Ctrl+L for Level does not work. I press it, the Level does not show up. How may I fix it?

1. Make sure that your image is in RGB mode. Go to Image Menu>Mode>RGB.
2. Check that no two layers are selected in the layers panel.
Even then the shortcut does not work , then it that case you can always use the workaround "Enhance Menu>Adjust Lightening>Levels.

CTRL+F11 does not work

Hi,
When ever I try to query the request its shows an error
Steps to reproduce the error:
1) Select sysadmin resp
2) Select concrrent request
3) click on find request ( I can find all my requests)
4) A new form is opened , just say F11 to get into query mode
5) please enter % in any feild and execute it
I have the below error
"please fill inthe selective in atleast one of the the following feilds for performance reasons"
It was working before the upgrade.
Changes upgrade patchset level 18 to 19.
And if the format is x% it works
it does not work when I give %x .. It is not accepting first character as wild character
Thanks

Hi 123;
Please check below
How to Change / Customize the Key Mappings (F10, F11, etc.) for Forms in E-business Suite [ID 782325.1]
How to Change / Customize the Key Mappings for Webforms? [ID 209671.1]
Using Forms 9.0.4.2 or Higher [Shift F10] & [Shift Ctrl F10] Key Mappings No Longer Work [ID 340651.1] << could be similar as yours
Also check [this page|http://oracle-magic.blogspot.com/2007/01/do-you-want-to-remap-your-keyboard-keys.html] << as you can see you can check related fmrweb.res file(take backup first) for your issue
Hope it helps
Regard
Helios

Ctrl-Clic combination not working

Similar Messages

Maybe you are looking for