Ctrl-E opens image in 1/2 width PS

LR 3.3, CS5, W7, 27" monitor: ctrl-e opens an image in a 1/2 width PS window biased right (except that the toolbar shows up on the far left). Click on maximize sorts it out but it's a nuisance. Can't remember when it started, most likely after 3.2. Any insights?
Paul

Thanks Mark, yes, I've done that. It's a weird behaviour. If PS is open in the background, no prob. But if it's just open on the taskbar, then ctrl-e in LR opens a half-screen PS (except for the toolbar which is in it's normal position on the far left). Perhaps it's an OS thing.
Paul

Similar Messages

Skips Camera Raw when opening image from PSE organizer to CS

I have PSE7 from before and recently purchased CS6. I want to keep using PSE as an organizer and edit in CS6. When opening a raw file (CR2) from the organizer to CS using Ctrl-h the image opens directly in CS without opening in Camera Raw first. If I open an image directly in CS it goes through CR first. How do I send the image directly to Camera Raw and then to CS from the organizer? I am running on Windows 7 64 bit. The Camera Raw for PSE7 if 5.6 and 7.3 for CS6. Tried posting under photoshop (http://forums.adobe.com/message/5006582#5006582), where it was suggested I post in the elements forum.

Unfortunately PSE7 can’t be updated to Camera Raw 7 and this is undoubtedly preventing the file from opening in the CS6 raw dialog. Your best bet is to open from CS6 Bridge by double clicking the thumbnail in Bridge. In any case Elements will create an export copy for external editing with Ctrl+H and you will end up with lots of duplicates and sidecar XMP files stacked in version sets in the Organizer. I think for raw files you will find Bridge much easier. If you finally save as PSD, Tiff or jpeg after you finish editing that version will also be visible in Bridge but you could also import it into Elements e.g. if you wish to add it to an album.

CS 5 won't open images from Lightroom 3

Hi,
I just upgraded to CS5 from CS3, and I've been using Lightroom 3 since it came out. The installation went fine. After working on some images in Lightroom 3.3, I tried to open them in CS5 12.02, and strange things started to happen. Some times the images open, some times they don't. This applies to NEFs, TIFFs, and PSDs. Sometimes when I try to open an image from my Lightroom catalog, CS5 mysteriously opens small jpegs of photos that are not even in my catalog. In fact, they are images I don't even recognize and did not even know were on my computer.
I called Adobe Customer Support. They were helpful, and they had me set CS5 as my external editor as well as being the primary editor. They also helped me reset my preferences for both Lightroom and CS5. This seemed to work, but when I opened Lightroom and CS5 the next day, the problem started happening again, even when I open images in CS5 using the second external editor.
I spent over and hour on the phone with Customer Support the first time, and I'm trying to get help elsewhere before I call again.
I have a MacBook Pro running Leopard 10.5.8 with 4 GB of RAM.
Any help would be very much appreciated! Thanks!

derMueller wrote:
Another expirience is, when I try to open directly from Photoshop any other image, Photoshop ignores the XMP and opens the original file without any modification.
That's normal if the raw files were originally edited in Lightroom. Lightroom stores all edits in the catalog, not the xmp sidecar. You can set Lightroom to write to xmp as well, but that slows it down a little and so it's off by default. The Lightroom shortcut ctrl/cmd+S will also save to xmp.
I do have a warining at several images in Lightroom = "metadates have been changed - would you like to overwrite data or import ?"
That's related to the above, and also normal if you go the other way - edit in ACR and then move to Lightroom. It'll then be in xmp, but not the Lightroom catalog.
As for the missing on-screen image, that's a common video driver bug (although I suppose other causes are possible). For Windows you can download updated drivers directly from the manufacturer's website, but that's not possible with Mac. You'll have to wait for Apple to fix it.

When i open a new document, my "width" and "lenght" add two zeros automatically to file size??? For example basic A4 size in mm is 210 00mm x 297 00mm? And i can´t do nothing about it! Why on earth?

When i open a new document, my "width" and "lenght" add two zeros automatically to file size??? For example basic A4 size in mm is 210 00mm x 297 00mm? And i can´t do nothing about it! Why on earth?
This "error note" must have something to do about it?

elppaelo,
You may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Opening images in Safari

When I click on an image on a web page using Safari, instead of opening the image in a new window (as it did 2 weeks ago) the image is downloaded to the desktop.
If the image is a link to another web page it behaves correctly. It only happens if the link is to open the image in another window. Safari's preferences are set to download to the desktop but it's the automatic unwanted download I want to stop.
For example, if I click an image on a Wikipedia page it opens another window with a medium resolution version of the image. All OK so far. If I click the medium resolution image it used to open a window with a full resolution image but now downloads a full resolution image to the desktop. If I click the 'full resolution' link underneath the image it does the same thing. If I ctrl-click the image and select 'open image in a new window' it opens an empty Safari window and downloads a medium resolution copy to the desktop.
Anyone got any ideas? I've got a desktop full of picture of USS Iowa trying to work out what's happening.
Peter

I was only able to resolve this issue by an archive and reinstall of OS 10.4. It was one of a number of bugs that developed after replaceing the keyboard. My guess is that the old wireless keyboard was sending garbage to the computer some of which corrupted parts of the system software. Nothing short of a reinstall worked. I'm relieved to report that it now works fine.

OSX 10.6.8 Firefox 30.0 can't open images from google image search results I can't left click on a google image search result to open the image.

OSX 10.6.8 Firefox 30.0 can't open images from google image search results
I can't left click on a google image search resultt to open the image. This works fine on Safari so is not a mouse issue. When I tried to ask this question in Firefox when I left clicked on the ASK THIS button nothing happened
Originally posted in OS section - Sorry

Do you otherwise have problems with the mouse in Firefox?
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Keyboard shortcut for cycling through open images

hi guys, i am working in a PC Photoshop now. Which is the Keyboard Shortcut for cycling through open images? Where i can change it if i want it? I mean clying through open images and not applications which is Control+TAB.
Thanks for any info!
S

Actually Ctrl+Tab is the photoshop windows keyboard shortcut for cycling through open images.
Does that not work for you?
MTSTUNER

Hot key to open image from Camera Raw?

Is there a key combination in Camera Raw v4.1 to open the image in Photoshop CS3 instead of having to use the mouse to click on the Open Image button?
Thanks to anyone who can help me out.

Barry,
You are under yet another misconception if you think I have been commenting on your workflow. I have not, and will not.
From the beginning, I have been focusing on a single issue: what single-key stroke may affect the Open button in the ACR dialog box. The answer was (and remains) that there is no single-key stroke that will open the image in Photoshop if you're having Bridge host ACR. Command+O will open the image on the Mac, or Ctrl+O on Windows.
Jeff then pointed out to you that the Enter key activates the Done button
as long as Bridge is hosting ACR, and that the same Enter key activates the Open button
if Photoshop is hosting ACR.
The question of deciding whether Bridge or Photoshop is going to be hosting ACR is a separate question from using Bridge to open your images.
Of course you can open your image through Bridge and
still have Photoshop host ACR.
Thus, your workflow has nothing to do with what I've been trying to convey to you.
And I have no comment, criticism or suggestion in connection with your workflow.
As Jeff has repeatedly explained to you, it makes more sense to have Bridge host ACR when you're only making global adjustments to your images, and to have Photoshop host ACR when you need to make localized adjustments, (e.g. selections) to your images or to print them.

CS3 Extended having problems opening image files.

I had a CS3 Master Collection from The Art Institute forced us to buy that I had never opened because Photoshop 7 worked fine & I didn't need all the other crap that came with CS3 in the Master Collection. So I had been using Photoshop 7 for years & years, but when I got a new computer, Photoshop 7 didn't work anymore. If you can't tell me what's wrong with CS3, maybe you can tell me how to get my old 7 working on 64 bit windows?
Getting this stuff out of the way:
*Brand new computer, Windows 7 Pro, 64 bit.
*Adobe Creative Suite 3 Master Collection, installed about 3 months ago.
*CS3 Extended was working just fine for 1 or 2 months with no problems.
*Problem: CS3 stops responding or hangs exsessively when opening image files.
*Already tried alt/ctrl/shift reset.
*Already deleted all the printers.
*Already tried the tilde in front of the TWAIN.
*This Master Suite takes like 3 hours to install, so reinstalling is something I'd rather avoid.
*Yes, it's updated.
*Yes, the licence was renewed.
PSE Error Log:
2011:06:05 23:52:09 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:53:08 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:53:55 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:54:19 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:54:54 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:06:05 23:54:54 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:06:05 23:54:54 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:55:02 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:06:05 23:56:22 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:56:49 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:57:17 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:58:01 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:58:17 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:58:43 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:05 23:59:51 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:00:34 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:00:58 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:01:26 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:01:54 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:02:18 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:02:54 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:03:21 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:05:20 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:05:33 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:06:00 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:09:33 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:16:38 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:20:43 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:22:23 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:23:42 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:25:42 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:31:55 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:34:05 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:35:05 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:37:58 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:38:31 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:39:38 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:40:06 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:40:45 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:41:12 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:41:59 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:42:58 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:44:01 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:44:31 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:46:09 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:46:47 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:48:18 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:51:02 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:51:54 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:54:01 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:56:09 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:56:42 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:57:16 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 00:57:36 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:06 03:22:50 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:06:17 02:18:38 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:06:17 02:18:38 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:06:17 02:19:00 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:01 05:01:58 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:01:59 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:01:59 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:01:59 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:00 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:00 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:00 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:01 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:01 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:01 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:02 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:02 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:02 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:02:03 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:04:02 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:10:44 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:01 05:13:42 : ..\winsupp\Printing.cpp : 1297 : REQUIRE failed
2011:09:03 22:18:39 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:03 22:18:39 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:03 22:26:03 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:03 22:26:03 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:03 22:26:49 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:03 22:28:02 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:03 22:28:02 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:03 22:28:29 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:04 21:18:10 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:04 21:18:10 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:05 15:49:01 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed
2011:09:05 15:49:01 : ..\..\le\sources\ExifSupport.cpp : 2866 : REQUIRE failed

Terabyte drive. 80% free space.
Yeah, I reinstalled. Can't believe I had to go through 4 discs to reinstall one program for the suite.
Reinstalling windows is overkill when" error check," & "SFC /scannow," & "boot repair" are sufficient.
Found out that it WILL work if you don't have a browser window open, but I like to listen to stuff on the net when using photoshop. I dunno why the browser makes photoshop refuse to open or create new images, but it would be helpful to know.
Also, despite not having a printer, the error log seems to indicate that it's part of the problem.
Oh, I forgot to mention that I did defrag after reinstalling. I know someone will bring it up if I don't.

Photoshop CS6, Mac OS, switching through open images with OS command no more possible

Using Photoshop CS6 (13.0.1) on a Mac Pro OSX v 10.6.8 it is no more possible to switch through open image windows with the OS related key combo "command <".
There is also no Photoshop own configurable command available, that could solve this issue.
CS5 or versions below always allowed that, and I very much miss this practical and fast switching between images, much faster then having to maneuver down through the "windows" menue.
Anybody knows a solution?

thanks conroy, Ctrl+Tab does the trick! - Gerhard

PS CS6 zoom sometimes affects all open images

I'm trying to figure out how to replicate this issue. This is on Win7 x64 with PS CS6. On an infrequent basis, when I zoom in on one open image, the same zoom magnification will be applied to all the other images I have open. When this happens and I have several image files open, you can imagine it's annoying to have to reset the view for all those open images.
It looks like the zoom inheritance sometimes happens when I drag a layer from a zoomed-in image onto another open image window that's at a different zoom magnification. But it doesn't happen every time.
If this is a "feature" please tell me how to avoid or disable it.

The shift+Ctrl+0, + and - or 1 are shortcuts I want to ask to have implemented as a JDIs on the feedback site. Also, a shift+clicking the contextual menus of the zoom/hand tool (or spring-loaded ones) Done: http://feedback.photoshop.com/photoshop_family/topics/photoshop_jdi_allow_more_zoom_all_wi ndows_shift_shortcuts#add_product_label
Note: the CTRL or ALT+Spacebar do respect the Shift modifier to work on all open document.
I'm wondering if I will not also ask to have the double-click (and shift-double click) of the zoom and hand tool not register as a tool change (be spring loaded) done: http://feedback.photoshop.com/photoshop_family/topics/photoshop_jdi_make_double_clicking_t he_zoom_or_hand_tool_a_spring_loaded_event?topic_tools=open
Thanks for that feature, Chris, I use it a lot!

Photoshop-When opening image without tab view, image opens with only a portion in view

I having an issue with CC.
When electing in the preferences to not open image in Tabs. The images open with only about 25% of the image area showing. Forcing me to (command) 0 for full to screen preview or (command) +/- to see the image.
I am not talking about seeing the image at 100% resolution just the entire image within the floating window without having to command before view.
Sidenote: Adobe Customer Service is all based in India. I spent 4 hours on the phone only to hear that this is that way photoshop works.
There would be no logical explanation for this. Since the first version of Photoshop this has not been the case.
I think this should be called view porn with wife in the room mode. Other than that I see no point.
Can anyone help?
Lv
Chadwick Tyler

Moving discussion to Photoshop forum.

When opening an image Photoshop Elements 12 is opening it in Camera Raw, it is not a RAW image and it is cropped How do I uncrop the opened image?

When I am opening a .jpg image not an actual raw camera image from Elements 12 it is being opened as a camera Raw image and the image is cropped, I can't find anyway to get the image to uncrop or zoom out so that the entire image is visible so that I can actually edit it to something that is useable. The images were taken with an iPad and copied I suspect using the organizer from Elements 11 but I can't be sure. If I could just uncrop the opened image so that the entire image is visible this would not be a big deal.
Is there a way to uncrop the image that is being opened by Camera Raw? Am I going to have to get my hands on the source of the images (the iPad) and copy the images again using explorer and not let them be copied with the organizer?

Uncheck the boxes at the bottom of the dialog Scale styles and resample Image so that only constrain proportions is checked. If you the change the resolution box from 240 to 300 you will get back to your original dimensions.
This is a meaningless thing to do, you still have the exact same number of pixels, you have only changed the metadata number in the file for ppi, and your prints are not affected by this number.
You could also use the same method to change the dimensions to 6 x 4 or 9 x 6 etc.
There are some cases (actually most cases) where you need to CROP the photo to change the dimensions, when the aspect ratio of the original photos is different than the aspect ratio of the final photo; the specific case in 99jon's example is the only case you ever want to change dimensions using Image->Resize->Image Size, where the aspect ratio doesn't change from 6x4 to 9x6 (or 12x8 or 18x12 or ...), and even then, you could do the same thing simply by telling the printer the size you want, you don't really need to do anything in PSE.

Open image capture question

I am having trouble using the detect separate items feature in the Apple open image capture feature. Instead of separating the scans, it just does one big scan. Is anybody else having this problem? If it works for you, what type of scanner do you use?

Have you tried VueScan? It works well with several scanners. I would give it a shot. I have an old UMAX scanner that has no driver available for Mac OS X and VueScan made it work.
http://www.hamrick.com/
Here is the link to the latest Cannon driver. Looks kind of old.
http://tc.versiontracker.com/product/redir/lid/203799/LiDE20LiDE30v7010X.app.sit

Lightroom (Win7) 4.3 "Edit in" function opens Elements 11 but doesn't open image

Howdy All,
I'm running Windows 7 64bit Lightroom 4.3, right clicking on the current open image and selecting "Edit In" "Photoshop Elements 11.exe" which does cause Elements 11 to open but without opening the image originally selected from within Lightroom. I saw that Mac users need to point the "Edit In" Preferences to the proper location of the Photoshop Elements Editor but I couldn't find info that confirms I'm pointing at the "right" Photoshop Elements 11 file for Windows 7 users.
Note that I had to manually enter the "Photoshop Elements 11.exe" within the preferences settings because I had previously uninstalled Elements 9 which had been the choice within the preferences setting for "Edit In".
How do I get this Lightroom4.3/Elements11 sequence to automatically open the RAW image in Elements 11 with the current set of edits made in Lightroom?
Thanks, Dave
(My 1st post in this forum!)

Howdy All,
After going back into Lightroom/Preferences for the thousandth time, all of a sudden instead of having PhotoshopElements11.exe as the only logical choice, I now had a folder within the Adobe folder called Photoshop Elements 11 (that had its own special Adobe folder icon) and within that folder was no longer "Photoshop Elements11.exe" but now "Photoshop Elements Editor"! That, of course, was what I was looking for all along. Once that was selected within Preferences, Elements now pops-up with an image ready for editing. I'm not sure why Photoshop Elements Editor is now a choice when it wasn't last night. I had already performed re-installs of both products, several re-boots etc. and never had Editor as a choice. I hadn't even shut down my PC overnight either! I was beginning to think that Editor was only a Mac term and that Win7 used some other name that I had yet to discover. Maybe my PC was just waiting for 2013 :-). All is well.

Ctrl-E opens image in 1/2 width PS

Similar Messages

Maybe you are looking for