CTRL+V is requested by this forum body to paste here

I want to paste a photo to this forum body.
The forum body request that I use CTRL+V to paste.
This does NOT work here.
I can paste text, but NOT a photo.
I can paste with CTRL+V the photo I want to paste to a WORD document (.docx) but not here.
What am I doing wrong?
This question was solved.
View Solution.

Hi,
To insert an image with your post, use the 'Insert/edit Image' option in the text editors toolbar to upload it from your computer- see the image below.
Note: Although the image will be immediately visible to you, the rest of the community will not be able to view it until it has been approved by a moderator.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

First, I would like to know if its 2014 in this forum like it is here in NJ. Second, I'd love to pick the brains of some Galaxy S5 people. Im assuming I'm in the wrong spot. If you are a guru and a Samaritan,

First, I would like to know if its 2014 in this forum like it is here in NJ. Second, I'd love to pick the brains of some Galaxy S5 people. Im assuming I'm in the wrong spot. If you are a guru and a Samaritan, please email me at (Removed)
Private info removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

Apple does not give away its products.
Unless you are the 1,000th person to show up at a new Store and Tim Cook is there and his assistant is filming you to be posted on their Home Page.
That is yet another FaceBook SCAM.

Approximately 6% of all requests for help on this forum are ever "solved."

Approximately 6% of all requests for help on this forum are ever "solved." And approximately 34% of all requests for help on this forum are never responded to. Even with all the caveats, these numbers are embarrassing. Good luck everyone!

More facts and stats from the horse's mouth - http://www.mozilla.org/foundation/annualreport/2009/sustainability.html
"Total assets as of December 31, 2009 were $143 million compared with $116 million at the end of 2008, an increase of 23 percent. Unrestricted net assets at the end of 2009 were $120 million compared with $94 million in 2008, a 28 percent increase."
"Mozilla consolidated expenses for 2009 were $61 million, up approximately 26 percent from 2008 expenses of $49 million. Mozilla operating expenses in 2009 continued to remain highly focused on people and infrastructure."
"At the end of 2009, Mozilla was funding approximately 250 people working around the world."
Yes, Mozilla is indeed doing very well but they're a bit worried about the IRS audit that is currently going on.
Now, if we take the figure from the 2008 cnet article that 80% of expenses are spent on Mozilla employees as a relatively stable benchmark for 2009, we see that employee salaries averaged out to around $200,000 dollars annually for each employee, which obviously isn't what each employee is actually getting paid, but what it does mean is that given typical corporate scaling of salaries, some folks in this non-profit are making lots and lots of money.
The individuals who should be the most upset about Mozilla's unwillingness to invest even a fraction of its profits into building a real and responsive user support system are the collective-community-driven-volunteers who commit their free time so Mozilla can continue to cash in big time at their expense. A brilliant model!
Again, Firefox users appreciate the work that you and the other unpaid/unacknowledged volunteers do here.... Mozilla appreciates it more.

Authorisation request for this document was cancelled

Forum,
I have an approval stage and template configured in SAP when a sales order is raised it prompts the user for authorisation. Whilst this is ok'd the order is placed in a 'Draft' status. Upon trying to add one particular order, i get the following message:
The authorisation request for this document was cancelled. The document cannot be added inless the authorisation request is restored.
As he needed to get the order processed. I advised he duplicate the order and re-add it this time ensuring the correct authorisation procedure is carried out.
Why would this occur?
Regards,
Juan

HI Juan
The question u have asked is nor very much clear the first scenario is that once the approval is rejected the document saves in draft well if thats the concern than this is the way the approval procedure is defined that without approval the document should not have any affect on the system whereas rightly said by fellow geniuses u can have multiple person to approve if one is not present other can approve it this would save time and effort for you
The second scenario is that the approval procedure u have assigned gives u the message with one particular document and its fine with rest if thats the case then i would request you please check the query if there is any associated with the approval procedure
Regards,
Manish

"You do not have permission to post in this forum"

I have another account that cannot do anything much at all, and I would like to get it fixed without a five day wait for a Genius Bar appointment, then a 1 hour bus trip each way with an "I can't help with that" in the middle.
The account has been broken for over a year. This is what happens:
I can submit a question to the community.
I can open any postings that show as matches.
If there are no matches and I get thrown to the list of communities, then I can't view or post to any of them. I see the product names and icons (iPad, for example, but the list of related communities on the right is missing for all products. Which seems unfair because I own most of them.
You do not have permission to post to this forum
It appears you are not allowed to view what you requested. You might contact your administrator yadda yadda.
I have posted about this before:
https://discussions.apple.com/message/17393255#17393255
with no real answer (a threat of possible help, if you like, but with no resultant benefit.)
My question is - how does one get help with the help forums? I have phoned Apple's help desk and they said they could not do anything.
I would really like to get my primary account working - it connects to the right email address, it all set up and comfortable - and it does not use my name and location as an alias (who's idea was that? Fire that person!)
If you know of any court of appeal, help desk support forum support line, 21-step program or anything else that might help, please tell me. This has gone on long enough.
I tried to do something about this from the other account but to get support for the support communities you have to be able to post to them.
"That's some catch, that Catch-22"
"It's the best there is."
Thanks in advance for your help.
PG.

Seventy-one - To my knowledge, I have been a model citizen. And not impertinent of you at all - a very reasonable question. All words have been 1-3 or 5+ letters long, I certainly have not received any communication (that I have been able to find) that indicates a transgression. And there is another question - which castle, and are you saving for the deposit?
Bleach - other user name is "Ploughguy". But I was more after a means of contacting those with influence myself. Most fora like this have a contactable moderator or administrator. I am rather amazed that one needs the intercession of the saints. Such as St Roger...
Roger - This situation. The "can't look-can't post" situation. It has been (not) happening for some time.
I previously raised the issue here .
BTW, I created yet another ID because I was not careful enough when I set up the second ID and it defaulted to "NameFromSuburb". This is OK for johnfromnewyork but a huge privacy risk if you are ranulffromlittlestorpingintheswuff - an unusual name in a small place. I do not know how that default got through the peer review. Basically it says "ranulf has the good taste to own an Apple something which is portable and fenceable, and he lives not far from here". I have suggested to the privacy people that it is a very bad idea. And yes, I realise my alias is already out there. I have asked the privacy people to blow it away.

Hi there how are you guys out there of this forum? I got a question for y'a

Hi there how are you guys out there of this forum? I got a question for y’all
I wanted to know how I could record different folders using iTunes
Cause when recorded 2000 thongs on the DVD
There were 2000 songs to go through
So I really wanted to have had folders and then the music recorded inside them
So I could get right to where I wanted real quickly
Could anyone please teach me how to do that real quickly?
Can we do it with iTunes?
I know we can do it with Nero.

1) Go to file, select new playlist. Creat the playlaist.
2) Download your music into iTunes.
NOTE: CHECK 'Recently Added' before you download your music.
If the select boxes has a check in them, turn it off by
holding down the 'ctrl' key and selecting one of the
checked boxes. This shold turn off all the checks.
It would be better to clear 'Resently Add' of all
previous downloads, but I don't know how to do that
yet.
3) under 'PLAYLIST' on the right, select 'Recently Add'.
all of your song should show there with a check in the selection
box.
4)Hold the shift key and select the frist (selete records name),
then the last recorded tune. All of the recordings shouls light
up blue.
5) While holding the 'shift' key, drag one of the records to your new
playlist. All of the blue highlighted song will transfer to the new
playlist.

How to make this forum better?

Hi friends
I have the ability to create an announcement inside this forum. So I'm thinking about this possibility. I'm following this forum for about a time just to be sure it's free of spammers (and also for learning each time more about scripts and participating when having time).
I'd like your opinion....
What do you think about creating an announcement called "Read it before posting your questions here". The body of the announcement should tell the users links from where are the manuals of Illustrator Scripting and the JavaScripts Tools Guide. This could help people find useful informations of Illustrator scripting and know more about it. Do you think it would be useful?
Also, do you think some times...is there some users who ask questions, but, at true their objectives is to make the specialists here to create an entire code for them?? ...like..."Hey, I want to create a snow ball in Illustrator. How could I do via script?"
If you perceive there are such users, do you think would be good to include in the announcement a paragraph to warn about this?? So, this would alert this forum is a place essentially for "help"?
Can you share your inputs about this subject, on how I could create a good announcement to help new users to use it better?
Thank you very much
Best Regards
Gustavo.
Message was edited by: Gustavo Del Vechio

Carlos
When I open the Illustrator scripting main page (http://forums.adobe.com/community/illustrator/illustrator_scripting), logged or not, the new yellow widget appears above the list of discussions. See my print of screen.
Other unecessary widgets was taken off from the avaliable area of the page.
Don't you see it in your side?
Best Regards
Gustavo.

"The page isn't redirecting properly, Firefox has detected that the server is redirecting the request for this address that will never complete" has anyone come across this staement?

This statement pops up on some occasions when I am sending an Email, but the Emails are usually received by the recipient! who are mostly Family so I have been able to check that that have been read.

Hi mawhitehead,
try these
* '''The page is not redirecting properly''' - MozillaZine Knowledge Base http://kb.mozillazine.org/The_page_is_not_redirecting_properly
* '''Network.http.redirection-limit''' - MozillaZine Knowledge Base http://kb.mozillazine.org/Network.http.redirection-limit
* I am unable to access my gmail calender. It states that refused because of cookies being blocked. https://support.mozilla.com/en-US/questions/786049
* tried posting new thread on sourceforge shareaza forums, firefox gives problem loading page, https://support.mozilla.com/en-US/questions/757368
* Firefox has issues redirecting, cookies are all on, I think I voided my warranty. https://support.mozilla.com/en-US/questions/755435
* firefox message: "The page isn't redirecting properly" Firefox has detected that the server is redirecting the request for this address in a way that will never complete. https://support.mozilla.com/en-US/questions/695393

Class unloading doesn't work as described in this forum !!!

Hi,
to the problem of dynamic class unloading many people in this forum wrote:
- write your own class loader
- load the class to be unloaded later
- set all instances of your own class loader to null
- if the work is done set all instances of the loaded classes to null
- call the garbage collector and the classes will be removed
I constructed a simple test for the problem:
- the test class
public class Impl {
public String getVersion () {
return "1";
- instanciating the test class
- printing the value of getVersion() to the screen
- changing the return value of getVersion() and recompiling it (the test application is still runnig)
- unload try (see below)
- instanciating the test class
- printing the value of getVersion() to the screen
Back to the tipps above. Why doing this? The theory says a class loader stores every loaded class for
suppressing unnecessary reloads. In reality the classes are NOT stored in the own class loader but in
the parent of it. If no parameter is given to a class loader's constructor the parent of a class loader
is the system classloader.
Let's have a look at the source code of java.lang.ClassLoader.loadClass(...):
protected synchronized Class loadClass(String name, boolean resolve)
throws ClassNotFoundException
// First, check if the class has already been loaded
Class c = findLoadedClass(name);
if (c == null) {
try {
if (parent != null) {
### here the loadClass() of the parent is called and the
### loaded class is stored within the parent
c = parent.loadClass(name, false);
} else {
c = findBootstrapClass(name);
} catch (ClassNotFoundException e) {
// If still not found, then call findClass in order
// to find the class.
c = findClass(name);
if (resolve) {
resolveClass(c);
return c;
My Idea was: Give a null to the class loader's constructor so the classes cannot be stored within a parent.
Here my test class loader (it is build as it is described within javadoc of java.lang.ClassLoader
except the constructor):
import java.io.*;
public class MyClassLoader extends ClassLoader {
public MyClassLoader () {
super ( null );
public Class findClass ( String name ) {
byte[] b = loadClassData ( name );
return defineClass ( name, b, 0, b.length );
private byte[] loadClassData ( String name ) {
byte[] ret = null;
try {
InputStream in = new FileInputStream ( name + ".class" );
ret = new byte[in.available ()];
in.read ( ret );
} catch ( Exception e ) {
e.printStackTrace ();
return ret;
The loading of the class works fine
ClassLoader cl = new MyClassLoader ();
Class c = cl.loadClass ( "Impl" );
Object i = c.newInstance ();
Impl impl = (Impl)i;
The class "Impl" was found and instanciated. But the cast "Impl impl = (Impl)i;" causes a
"java.lang.ClassCastException: Impl"
May second idea was deleting all instances of the class to unload from the class loader via reflection.
A strange way I know but if this is the only way I will do it. But this doesn't work too.
After deleting the class from the class loader and all its parents the class is still anywhere in the depth
of the VM.
Can anybody help me with this problem?
Thanks in advance,
Axel.

<pre>
I made a similar and simpler program and it worked:
import java.net.URLClassLoader;
import java.net.URL;
public class DynamicExtension {
 public static void main(String args[]) throws Exception {
 URL[] ua = new URL[] { new URL("file://c:\\TEMP\\") };
 URLClassLoader ucl = new URLClassLoader(ua);
 MyLoadable l =
 (MyLoadable) ucl.loadClass("LoadableObject").newInstance();
 l.printVersion();
 Thread.currentThread().sleep(10000);
//you have ten seconds to replace the old version of the LoadableObject.class file
//so yo?d better had compiled the new one before executing this
 ucl = new URLClassLoader(ua);
 l = (MyLoadable) ucl.loadClass("LoadableObject").newInstance();
 l.printVersion();
 ucl = null;
 l = null;
 System.gc();
public class LoadableObject implements MyLoadable {
 public void printVersion() {
 System.out.println("version 1");
 protected void finalize() {
 System.out.println("finalizing " + this);
public interface MyLoadable { void printVersion(); }
C:\Java\TIJ2\Test>java DynamicExtension
version 1
version 2
finalizing LoadableObject@1bd03e
finalizing LoadableObject@4abc9
The ClassCastException was due to the fact that one class was loaded by the system class loader, the one that appers as Impl impl = (Impl), and the other by MyClassLoader. That mean that they are different for the VM because they are in different namespaces: The namespace for MyClassLoader is the set of classes loaded by itself and those returned to it by his parent class loader as a result of a request to MyClassLoader?s parent class loader to load a class.
Setting null for the parent of MyClassLoader was in fact the cause of the problem, because that caused a call to a native method called findBoostrapClass. I guess this method looks for the classes in the bootstrap classpath where MyClassLoader shouldn?t be. This causes MyClassLoader loaded the class itself. If MyClassLoader had had the system class loader as its parent the result had been that only one classloader would have loaded the class. This is what happens in the example above so no ClassCastException is thrown.
In the source code for ClassLoader
there is the following:
* The classes loaded by this class loader. The only purpose of this
* table is to keep the classes from being GC'ed until the loader
* is GC'ed.
private Vector classes = new Vector(); /*
and:
* Called by the VM to record every loaded class with this loader.
void addClass(Class c) {
classes.addElement(c);
I would like to have seen findLoadedClass checking the already loaded classes in this Vector, but this method is native. Anyway, as the code for loadClass shows, the parent or bootstrap classloader is checked if findLoadedClass doesn?t find the class; Can we guess that findLoadedClass only checks the clases loaded by the classloader, not its parent?
By the way, could an example like this be made in c++?
</pre>

Welcome to this forum on "Core J2EE Patterns" by the Sun Java Center

Welcome to this forum on Core J2EE Patterns by the Sun Java Center!
CONTEXT:
This forum is intended for discussing the patterns from the Sun Java Center J2EE Pattern Catalog and other topics discussed in our book, Core J2EE Patterns.
We, the authors of the book, welcome you to this forum.
WHO WE ARE:
We are Enterprise Java Architects from the Sun Java Center (SJC), which is the Java consulting organization of Sun Microsystems. We are a world-wide group of architects focusing on all consulting related to Java technologies.
Visit our web-site for more information on SJC:
http://www.sun.com/service/sunps/jdc/index.html
BACKGROUND:
Over the last few years, we at SJC have worked with our customers in architecting, designing, and implementing solutions on the J2EE platform. We have worked on documenting the J2EE patterns for over two years and released the patterns for public review in Beta form via the Java Developer Connection in May, 2001.
The beta version of the patterns is available online as The Sun Java Center J2EE Pattern Catalog at:
http://developer.java.sun.com/developer/technicalArticles/J2EE/patterns/
Subsequent to the release, we received great feedback and comments from hundreds of reviewers. We then worked towards incorporating the feedback into the pattern documentation. One of the common comments was about the lack of code examples in the online documentation. The latest pattern documentation provides many code examples and incorporates all the feedback received so far.
BOOK INFORMATION:
Core J2EE Patterns, the book, was released at JavaOne 2001 during June 4-9, and will be available in stores around the end of June 2001.
The book includes the complete updated Sun Java Center J2EE Pattern Catalog with 15 patterns covering these J2EE technologies: Java Server Pages (JSP), Servlets, Enterprise JavaBeans (EJB), and Java Message Service (JMS). In addition to the J2EE Pattern Catalog, the book also provides other chapters that discuss design considerations,
bad practices, and J2EE Refactorings. Example code is included for all patterns and strategies.
If you wish to view the complete table of contents or order the book, please visit one of the following online bookstores:
Fatbrain.com: http://www1.fatbrain.com/asp/bookinfo/bookinfo.asp?theisbn=0130648841
Amazon.com: http://www.amazon.com/exec/obidos/ASIN/0130648841
COMMUNITY:
The online community for discussing the patterns included in our book Core J2EE Patterns has grown over the past year, since our first presentation at JavaOne 2000. This community is supported by our LISTSERV and is available for public participation at:
http://archives.java.sun.com/j2eepatterns-interest.html
You can view the past discussions on this list at the above URL.
FORUM LOGISTICS:
John and Dan are on the east coast and Deepak is on the west coast. We will be tuned into the forum and answering the messages periodically between June 19 and June 25, 2001. If you want to discuss the J2EE Patterns after June 25, you are invited to join the aforementioned J2EE Patterns Interest list.
FORUM DISCLAIMER:
All responses to questions posed in this News Group are given on an "as is" basis. We believe the solutions or explanations given here are correct, but do not guarantee that responses will be complete, without error and/or work for all platforms and system configurations.
The forum is now open! Let the discussion begin...
John Crupi - Chief Java Architect
Dan Malks - Enterprise Java Architect
Deepak Alur - Enterprise Java Architect
---Authors of Core J2EE Patterns

Rajakannan,
There are numerous ways to implement a templating mechanism in support of the composite view pattern, included in the catalog as a presentation-tier pattern.
The goal is to avoid simply having monolithic views with all the formatting code embedded directly withing the view. If we have common subviews that are shared across several or more views then we end up with a copy-and-paste type of reuse...undesirable. So, modularity is one issue. Another major force when considering the Composite View pattern is that we may want to manage the layout of our pages and the content of our pages separately. We may have some logical regions defined, such as a search panel and main body, and a subview that plugs into those logical regions that map to a physical page (ie: x.jsp and y.jsp). We may then want to vary one independent of the other...ie: we may want to modify the layout of the page w/o changing the content and we may want to vary the content w/o touching the layout.
There are a number of implementation strategies that can be used to implement the Composite View pattern, ranging from relatively simple to much more sophisticated. We describe each in our book and include source code examples.
The example in the book that allows for supporting all the issues described above is implemented using the "Custom Tag View Management Strategy" and uses a tag library written by David Geary, that supports the Composite View pattern. The library is also included in David's new book, Adv. JavaServer Pages, Prentice Hall, 2001.
Again, it's simply one implementation and, as you mention, there are many different ways to implement this strategy.
Thanks for your question,
Dan

Purpose of this Forum (Server General) *** Please Read Before Posting ***

Welcome to Windows Server General Forum !
This is an English TechNet forum, Please post your queries in English !
Scope:
The name "General" has a very broad significance and sometimes that might lead to some ambiguities.
The scope of this forum is to answer General "Server Administration" related queries pertaining
to Windows Server 2003, Windows Server 2008 / R2 and 2012 operating systems.
Again, "Server Administration" has innumerous aspects and at times it becomes bit difficult to categorize
them.
We try to answer your questions in General or provide troubleshooting support in depth as and when necessary
based on the context of the query.
Questions could be related to AD, GP, Server OS related Queries/issues/errors, general troubleshooting etc…
list is too huge and it's highly difficult to elaborate them here :-)
We understand that this scope and purpose can be a little confusing, we apologize for any confusion.
If you might not know the scope or purpose of this forum, we'll redirect you to read this thread if we need
to explain how this forum works.
Out of Scope:
Queries on following (but not limited to…) are Out of scope in this forum.
Scripting
SBS
- Small Business Server
IIS
Coding/Development:
Windows Client Operating Systems
Exchange
Server
Lync
TFS
SQL
server
Visual
Studio
.Net
SharePoint:
SCCM, SCOM
Third Party Applications
etc…
We might (but do not claim to) answer some of the out of scope questions directly here. If we do,
then it's just a Bonus ! and it's not the purpose or in the scope of what this forum provides.
Moving Threads:
It may happen that, your question might have been moved to this forum in an attempt by another moderator from
a different forum to help you find the correct forum or we might move your threads to an appropriate forum as and when necessary.
If a community member gave you the URL/link of a specific Technet forum, then you may request a move to that
specified forum (If a link to the forum category is specified; you'll still need to pick a specific forum from that category) or thread will be moved to the appropriate forum if a Moderator is around.
NOTE:
We cannot move a thread to another Microsoft forum that's not in the TechNet Forum System such as ASP.net,
IIS.net and Answers.Microsoft.com etc… So we can only provide links to those forums.
Marking Answers:
We propose a reply (such as a link about where to go ask your question) to a recent question as an answer,
and then we will usually wait one week (~7 days) before we mark it as the answer. We prefer you (the Asker/OP - Original Poster) to mark the answer, but we do not require it if you abandon the thread for a long time.
If you (the Asker/OP - Original Poster) refuse to let us propose and mark an answer (without telling us why
and helping us figure out the alternatives/workarounds), then we might need to lock a thread or move it to the Off Topic forum.
Please Read Before Posting:
How
to ask a question efficiently in TechNet forum
We have dedicated Server
Forums for different products/technologies, please consider posting your queries in appropriate forum for better help and support.
If you can't figure out where exactly to post your questions, please seek help in "Where
is the Forum For...?" forum and you will be given a URL/Link to an appropriate forum where you can post your questions.
Official
Microsoft Forum Sites
Credits:
Ed
Price - MSFT (Forum Owner)
This sticky has been created inspired by the Sticky on Where is the Forum for.. forum.
Regards, Santosh
MVP - Directory Services
I do not represent the organisation I work for, all the opinions expressed
here are my own.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
Blog | Wiki
If you have issues with your account verification or you can not post images, please get your account verified
by posting request in below linked thread.
Verify Your Account 7

Something new (or not noticed by me before) then as this thread appears as normal discussion in
My Thread view.
Regards, Dave Patrick ....
New UI has this functionality i.e. if you reply on a sticky, it will appears as a 'Discussion' in thread view.
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here, are my own and posted AS IS.

Any description on how to use the Text Editor used for this Forum?

I am very frustrated when trying to use the text Editing functions (without use of HTML, that I do not undertstand) that can be used to create Posts in this Forum .
Can somebody point me to a good description of the Text Editor used to enter/edit Posts in this Forum? Thanks a lot in advance.

Ian,
Thank You very much for your answer.
Based on your answer, I guess and fear, that there exist no "user guide" for this Text Editor.
I will wait a little bit more to see whether I get more information/answers. If not, i will probably write a "Feature Request" to request that Adobe provides us or point us to a reasonable User-Guide for this Text Editor.

How can I post the screenshot in my topic in this forum?

Dear Expert:I want to load the screenshot in my topic which I posted to this forums. I just copy and paste the screenshot in the topic body when I edited, and I can see it when I edited. But after I submit to post it to the forums, the screenshot disappear.Could anyone tell me how to post the screenshot or picture to the forums and others can view it? It'll be helpful for me to describe problem clearer and others understand it clearer.Many thanks for your help!Steven

I created a Flickr account and uploaded my screenshots there. Then I insert the URL to the picture. I believe that you have to change the input format to allow HTML tags as well. Unfortunately, you may not have permissions to do all that...I am not sure. In any case, you can insert the link to your flickr picture and we can navigate to it. Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

Does anyone from Adobe monitor this forum? Do they even care about this program?

I've clicked on many of the questions here as I try to learn how to use Story, but I have yet to see any responses from anyone at Adobe. It seems like they treat Story like an afterthought and don't care about its users. My frustration has grown more and more to the point now where I'm not going to use it any more, at least not until they add some basic functionality that is badly needed but missing. The tutorial section on Adobe TV, in one word, sucks. Badly. It's too bad, Story has some real potential, but Adobe has dropped the ball on it.

Hi CTL Video,
CTLVideo wrote:
I've clicked on many of the questions here as I try to learn how to use Story, but I have yet to see any responses from anyone at Adobe. It seems like they treat Story like an afterthought and don't care about its users.
I monitor this forum, as well as, Adobe Story quality engineers and other staff. I often see responses from the quality engineers. If you post specifics, we can try to help.
CTLVideo wrote:
My frustration has grown more and more to the point now where I'm not going to use it any more, at least not until they add some basic functionality that is badly needed but missing.
Have you filed any feature requests? Here's the link: http://adobe.ly/feature_request
That's the best way to communicate with the team.
CTLVideo wrote:
The tutorial section on Adobe TV, in one word, sucks. Badly. It's too bad, Story has some real potential, but Adobe has dropped the ball on it.
Feel free to create a separate post with suggestions on tutorials you'd like to see.
Thanks,
Kevin

(off Topic) CountryList of regular of this forum

WorldCup of Soccer is doing now.And Japan won twice :D
I think this SQL-PL/SQL forum is WorldCup of SQL B-)
Then let us listing CountryList of regular of this forum :-)
if you want to be added anyone below List.please teach me ;-)
create table CountryList(country,Name) as
select 'Africa','Billy Verreynne' from dual union
select 'Austria','cd_2' from dual union
select 'Austria','Richard Foote' from dual union
select 'Azerbaijan','Kamran Agayev A.' from dual union
select 'Brazil','fsitja' from dual union
select 'Canada','John Spencer' from dual union
select 'Canada','Tubby' from dual union
select 'Canada','Hans Forbrich' from dual union
select 'Denmark','Peter Gjelstrup' from dual union
select 'France','Nicolas Gasparotto' from dual union
select 'Germany','michaels2' from dual union
select 'Germany','Sven W.' from dual union
select 'India','Karthick_Arp' from dual union
select 'India','Satyaki_De' from dual union
select 'India','Arunkumar Ramamoorthy' from dual union
select 'India','ravikumar.sv' from dual union
select 'India','009' from dual union
select 'India','schavali' from dual union
select 'India/US','Aman' from dual union
select 'Italy','Massimo Ruocchio' from dual union
select 'Japan','Aketi Jyuuzou' from dual union
select 'NetherLands','hoek' from dual union
select 'NetherLands','Alex Nuijten' from dual union
select 'NetherLands','Rob van Wijk' from dual union
select 'NetherLands','Toon Koppelaars' from dual union
select 'NetherLands','Sybrand Bakker' from dual union
select 'Russia','Volder' from dual union
select 'Switzerland','Laurent Schneider' from dual union
select 'UK','BluShadow' from dual union
select 'UK','APC' from dual union
select 'UK','Boneist' from dual union
select 'UK','William Robertson' from dual union
select 'UK','Jonathan Lewis' from dual union
select 'Uruguay','Walter Fernandez' from dual union
select 'USA','Frank Kulash' from dual union
select 'USA','Centinul' from dual union
select 'USA','Justin Cave' from dual union
select 'USA','SanjayRs' from dual union
select 'USA','Charles Hooper' from dual union
select 'USA','Daniel Morgan' from dual;Edited by: Aketi Jyuuzou on Jun 27, 2010 4:45 PM (Add any people who are mentioned by below replys.)

One thing I have requested of OTN leadership is that we be able to in our profiles have the ability to list, and search, for a bit of personal information.
Charles Hooper (US)
Daniel Morgan (US)
Hans Forbrich (Canada)
Jonathan Lewis (UK)
Richard Foote (Australia)
And if you want information on anyone that is an ACE or ACE Director you can find it here:
http://apex.oracle.com/pls/otn/f?p=19297:3:2799519986939112
and here
http://maps.google.com/maps/ms?ie=UTF8&hl=en&oe=UTF8&msa=0&msid=101461418394975592073.000439f71111bb8cdc3b5

CTRL+V is requested by this forum body to paste here

Similar Messages

Maybe you are looking for