CTS+ Automated activation of change lists after import
Hi,
is there a way to have a CTS+ transport automatically activated after transport?
Problem is that change lists of the transport user get overlooked. We would like to automatically activated everything after the import of a CTS+ transport.
thx holger
Hi,
we created a transport with a right mouse click for a complete namespace and transported it to the target system ESR/IR and Integration Directory. It had to be manually activated (Change list of the CTS+ User)
That is what we want to skip.
---> Now when I write this I remember that this is a "feature", you guys are right -- sometimes you had to check your comm channels etc. and make these specific changes..
Right?
(You cannot always remember everything, true? That is why we have sdn as collective brain)
Edited by: Holger Stumm on May 12, 2010 11:18 AM - remembers now
Similar Messages
-
Automatic Activation of change list
HI All,
I have two questions regarding Change list.
1) User "1" has imported one TPZ file, does user "2" have the rights to activate it in the Change list.
2) Is there any way to achive automatic activation as soon as you import a TPZ file in IR or ID with out manual activation.
Regards,
Raj
Thanks in Advance.Hi,
I think you can do it this way...
goto the changelist and choose the change list of USer1 and then try to activate it.
I have never tried this.but you can try.
Rgds,
Kumar -
Error during activation of change list
I want to activate my changes in the change list of the intergration configuration. After activation I receive the error message:
unerwarteter Fehler bei Nachrichtenverarbeitung:
javax.transaction.HeuristicMixedException:
com.sap.engine.ts.exceptions.BaseHeuristicMixedException: One or more
XAResources were not commited because of Exception in the second commit
phase.
at com.sap.engine.services.ts.jta.impl.TransationImpl.commit
(TransactionImpl.java:451)Hey Gregor,
This link talks about the status of change lists:-
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/frameset.htm
and this one shows how to organize change lists:-
http://help.sap.com/saphelp_nw04/helpdata/en/ab/3adb41083f6024e10000000a1550b0/content.htm
I hope they are helpful.
Regards
Sushumna -
IMovies Changing Order after importing from DVD to iMovie
I take a burned DVD from our camera and then import it to iMovie. When I do this, after I get through importing it into iMovie, it changes the order of the film. Why is it doing this and is there a way to keep the order in place??
CoachC33 wrote:
I take a burned DVD from our camera and then import it to iMovie. When I do this, after I get through importing it into iMovie, it changes the order of the film. Why is it doing this and is there a way to keep the order in place??
I'm not familiar with those 'DVDcorders', but what I've read here so far, the problem is: iM isn't able to read out the meta-data on some of those disks which create the time-stamp. instead, it catalogs by date-of-import
two things .. :
• check, time/date is set in your recording-device ..
• iM09 has a feature, to set the recording date (and time) of a clip manually after import; read iM's Help how to accomplish that ..
and Welcome CoachC33 to the boards .. -
Incorrect song list after import from CD
After importing, iTunes showed an incorrect songlist -- a different CD from the same artist. I manually corrected all the song titles.
It also will not get the album artwork, even though the CD is in the iTunes store for purchase - why won't it import the album in the coverflow mode?Hi Mom-o-Val.
Welcome to the Apple Disscussion Boards!
There could be more than a couple reasons why iTunes is pulling the wrong info for your CD.
Could you tell me what CD it is?
mwn -
Power Point Slides Change Color After Importing
I built a lot of training material (22 Captivate
modules/movies)- Power Point slides for text, mixed with software
simulations. Several of the modules need updating, however, since
we upgraded from Office XP to Office 2007, I have been unsuccesful
in importing the edited Power Point slides. Instead of the gradient
pale-blue background with black text (as it appears in my Captivate
movies as well as in Power Point) the moment you choose your slides
to import into Captivate, they become purple with teal text. I had
a co-worker access my files on a share drive and attempt it on her
machine, with the same result.
Anyone else having Captivate anomolies after upgrading to
Office 2007?I have also had inconsistent results with PowerPoint imports
in both Captivate 1 and 2. There seem to be less in version 2. The
problem that I have been experiencing is with fonts. I will have a
slide that clearly is within the frame in PowerPoint, but when
imported into Captivate flows off the bottom of the slide. This is
also incosistent from slide to slide. Here's what I have been
doing. It's isn't ideal, but hopefully time will get this issued
ironed out.
1) I go through my normal import procedures for PowerPoint
presentations by look closely at the thumbnails provided before the
final import. If it looks like there is going to be a problem, then
I bail out at this point.
2) I go back into PowerPoint, call up my presentation, and
the do a File > Save As> and then select the file type at the
bottom as JPEG. It will then ask you if you want to save all. I put
them in another directory and PowerPoint saves each slide image as
an individual JPEG image.
3) I go back to Captivate and import these as images in the
file creation sequence.
This usually results in a pretty clean set of slide.
Hope this helps.
Greg -
Error while activating the object from change list in IR
Hi Friends,
I am trying to activate a mapping object taken from History.But I am getting error "version management was unable to execute the last action because temporary internal lock has been set" while activating from change list.
Regards,
Suresh.Hi Suresh,
have a look at the integration builder start jsp. There is a Link "Administration". On this page, on the left side, you can click on "lock overview" and check if your object is locked. Then you can remove this lock.
Best Regards
Sven -
Change Status only after Import a Document.
Hello Dears,
Someone knows how I can lock the user status to change only after import a document in the support message?
Thanks,
FS.
Edited by: Fabio Sato on Apr 13, 2009 8:18 PMHello to all.
Until now, no one have an idea of how to do this, without a ABAP development?
Regards,
FS. -
Transporting directly from ID transporting from transport change list
Hello,
am using CTS+ transport.
Here, what would be the difference after activating, all my objects of a CS go into tranportable change list and then i release for CTS transport, for all the objects of the CS.
And, what if I do not do the above step and after activating my change list, right click on my CS and hit "export" and use the mode of transport as "cts" and transport the entire CS?
My IR objects got successfully transported by the 2nd method.
MY ID objects are failing, am not too sure, if this is the reason. Groups and tragets in SLD are correctly maintained.
Thanks,
vishalHi Vishal,
What we do is: (From Dev to QA)
in Dev:
1) Right click on software component,select Export, mode CMS
2) Select objects to be transported.
3) Export
in QA:
1) go to change list of lsadmin.
2) Transfer list to your name
3) Make necessary changes(communication channel parameters,etc)
4) activate.
Same has to be done from QA to Prod
Are you doing the same?
Thanks
Regards,
shweta -
ABAP Mapping - Message shown in Standard Change List Process Log
Hi
I am working with ABAP Mapping program. I had created ABAP class using ABAP workbench. Before this, in exchangeProfile..data was provided for com.sap.aii.repository.mapping.additionaltypes ==>> as " R3_ABAP|Abap-class;R3_XSLT|XSL (ABAP Engine) " and 'Saved'.
In Interface Mapping, after providing the Class Name under 'Mapping Program' and activated. After activation (Standard Change List), it is showing the following messages under 'Processing Log'.
--> Standard Change List - Process Log message
Activation of the change list canceled Check result for Interface Mapping IM_ABAP_MAPPING | http://ABAP_Mapping_SREE: Type R3_ABAP of
program ZSREETEST is invalid because it is not registered in the exchange profile . Check the values for the exchange profile parameter
IntegrationBuilder.Repository.com.sap.aii.repository.mapping.additionaltypes
--> End of Log message
Can some one please guide me in resolving the ABAP mapping issue.
Thanks in advance.
..SreeSree,
The log says that there is ABAP mapping included in your exchange profile. Do the things what michal have told and also check your mapping program whether working fine or not in SXI_MAPPING transaction.
You can see this weblog for reference:
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
---Satish -
Cannot activate or rejected change list in Integration Builder
I cannot activate any object in Integration Builder, and Activation and Reject buttons are not active in change lists too
What can be the reason?
PS: there is no problem in Integration Directory.
ThanksHi,
This could be due to improper authorization, ask you basis to check your authorizations.
You can see about XI user authorization in below link .
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
Regards,
Sarvesh -
Changing default route after import route-target
Hi there,
Before I import route-target, the default route is set to 192.168.0.22 . After import the vrf, suddently it change to another PE, which is 192.168.0.19 . How do I force the default route to use 192.168.0.22 ?
before adding route-target import 4000:1
PE#sh ip route vrf customer 0.0.0.0
Routing entry for 0.0.0.0/0, supernet
Known via "bgp 100", distance 200, metric 0, candidate default path,
type internal
Last update from 192.168.0.22 00:14:08 ago
Routing Descriptor Blocks:
* 192.168.0.22 (Default-IP-Routing-Table), from 192.168.0.3, 00:14:08 ago
Route metric is 0, traffic share count is 1
AS Hops 0
PE#sh ip bgp vpnv4 vrf customer 0.0.0.0
BGP routing table entry for 100:239:0.0.0.0/0, version 335256
Paths: (2 available, best #2, table customer)
Not advertised to any peer
Local
192.168.0.22 (metric 4) from 192.168.0.45 (192.168.0.45)
Origin incomplete, metric 0, localpref 100, valid, internal
Extended Community: RT:100:120
Originator: 192.168.0.50, Cluster list: 192.168.0.45
Local
192.168.0.22 (metric 4) from 192.168.0.3 (192.168.0.3)
Origin incomplete, metric 0, localpref 100, valid, internal, best
Extended Community: RT:100:120
Originator: 192.168.0.50, Cluster list: 192.168.0.3
after adding route-target import 4000:1
PE#sh ip route vrf customer 0.0.0.0
Routing entry for 0.0.0.0/0, supernet
Known via "bgp 100", distance 200, metric 0, candidate default path,
type internal
Last update from 192.168.0.19 00:00:09 ago
Routing Descriptor Blocks:
* 192.168.0.19 (Default-IP-Routing-Table), from 192.168.0.3, 00:00:09 ago
Route metric is 0, traffic share count is 1
AS Hops 0
PE#sh ip bgp vpnv4 vrf customer 0.0.0.0
BGP routing table entry for 100:239:0.0.0.0/0, version 335386
Paths: (3 available, best #1, table customer)
Flag: 0x1820
Not advertised to any peer
Local, imported path from 4000:1:0.0.0.0/0
192.168.0.19 (metric 2) from 192.168.0.3 (192.168.0.3)
Origin incomplete, metric 0, localpref 100, valid, internal, best
Extended Community: RT:4000:1
Originator: 192.168.0.19, Cluster list: 192.168.0.3
Local
192.168.0.22 (metric 4) from 192.168.0.45 (192.168.0.45)
Origin incomplete, metric 0, localpref 100, valid, internal
Extended Community: RT:100:120
Originator: 192.168.0.50, Cluster list: 192.168.0.45
Local
192.168.0.22 (metric 4) from 192.168.0.3 (192.168.0.3)
Origin incomplete, metric 0, localpref 100, valid, internal
Extended Community: RT:100:120
Originator: 192.168.0.50, Cluster list: 192.168.0.3
thanks in advance.
maherMaher,
Here's an example:
router bgp xx
address-family vpnv4
nei x.x.x.x route-map localpref in
ip extcommunity 1 permit rt 4000:1
route-map localpref permit 10
match extcommunity 1
set local-preference 110
route-map localpref permit 20
BTW: if the route with RT 4000:1 had a different RD both routes would get imported in the VRF and you could set the local-pref using an import map instead of an inbound route-map on the VPNv4 session.
Hope this helps, -
CTS - Don't Always Want Transportable Change Lists
Is there a way to turn off automatic creation of the Transportable Change Lists? At times, especially during the trial and error of development in the IB-Repository, I do not like having a bunch of transportable change lists created. I end up deleting them manually since I always do initial transports of the entire SWCV after I am done.
In the past I have turned off the change lists by SWCV when using CMS for transports (config exists in Administration section of Integration Builder). Is there something like this for CTS?This change did not resolve my issue (and we bounced the system to make sure it took effect).
If anyone knows of anything else, please chime in.
When I make a change in IB-Repository, then go to the "Change Lists" tab and activate the change, a "Transportable" change list automatically generates. I would like that turned off and I will only make transports when I am ready.
Thanks -
Software Component Version cannot be changed after Importing Objects
Hi Gurus,
I was trying out the import export function of XI. I export a message mapping and then re-import it back into XI. However, after doing that, it is telling me that the Software Component Version cannot be changed. I'm now unable to make any changes to any of the objects.
Is there anyway to go ard this?
Thanks in advance.Hi,
I tried ticking the check box. But its giving me the following warning
Originality indicator for the software component version set later Ensure that the software component version only contains one original repository
i ignored the error and activate the change list.
However, im still unable to make changes. I tried ticking the "Original Objects" as well but still unable to change.
Thanks. -
Unable to move object. Change lists were not part of the same import
Hi All
I am facing a strange problem.
We have applied SP16 patch on our XI box and imported all the scenario objects and design objects which were exported as .tpz file .
After importing scenario object,all objects moved to a new node 'XI 3.0 Import' in change list and when I tried to activate this change list it gave me an error
<b>"Unable to move object. Change lists were not part of the same import"</b>
even if I try to move it Standard change list, it gives me same error.
Any solution?Hi,
Hope you are activiating the complete change list. You get this error because you trying to activate a part of the change list.
Please look at the URL:
Importing to QA box
Integration Directory (ID) transport to Prod system
Regards
Vijaya
Maybe you are looking for
-
Accessing/attaching files from desktop folder crashes applications
Hello, In gmail and yahoo on chrome, opera, firefox and safari, when I try to attach a file from the desktop, the browser crashes. In photosop/dreamweaver/etc. cs4 when i try opening a file from the open dialog box, that application crashes as well.
-
How to create objects in ABAP Webdynpro?
Hi, I want to create the object for the class: <b>CL_GUI_FRONTEND_SERVICES.</b> then i want to call file_save_dialog method. how shoud i write the code, plz?
-
Viewing PDFs in Acrobat X on Server 2012 freezing or taking a while to display
Hello, We have users that view large PDF files in Acrobat X Professional on a Windows 2012 Terminal Server. For the most part, there are no issues when they RDP into the server from a regular laptop, desktop or thin client. However, a particular us
-
All Aplications 'unexpectedly quit' -PLEASE HELP!
Hello. My powerbook seems to be going a bit crazy recently. It started with garage band- it kept crashing whenever I tried to open or save a project then it started happening with other programs and now it seems whenever I try to do anything signific
-
Has Anyone experienced the menu bar on a MacBook Pro 15" Retina ocasionally not appearing on startup?