Cts+ configuration in XI on SPS12
hi
i am trying to configure cts+ for xi java objects transport. can any body suggest me any document or the procedure
thanks in advance
akhil
Dear Akhil,
Here is what you are looking for..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00246ec1-dec5-2a10-58b9-e111c091c00b
Cheers,
Jazz
Similar Messages
-
CTS+ Configuration in PI 7.4 for SLD specific data
Hello Guys,
I am doing CTS+ configuration for PI System SLD Vesrion 7.4 to transport J2ee as well as SLD specific data through transports. My CTS server is Solman System.
I have created a CTS user in Solman System and in PI NWA I have defined destination to point to Solman System. But i am running into several errors.
Could anyone please help me what user authorization are required for CTS user in Solman to transfer Non-Abap Data and SLD specific data through transports.
Its very urgent.Did you happen to see this document of a CTS+ configuration for 7.3 (should be fairly the same for 7.4)? CTS+ Configuration for PI 7.3
Steps 1.2 and 8.2 have references to roles. -
CTS+ configuration in PI 7.4 to transport SLD specific data
Hello Guys,
I am doing CTS+ configuration for PI System SLD Vesrion 7.4 to transport J2ee as well as SLD specific data through transports. My CTS server is Solman System.
I have created a CTS user in Solman System and in PI NWA I have defined destination to point to Solman System. But i am running into several errors.
Could anyone please help me what user authorization are required for CTS user in Solman to transfer Non-Abap Data and SLD specific data through transports.
Its very urgent.Hi Bharatram,
Apply the below roles to the user
SAP_XI_CMS_SERV_USER
SAP_XI_DEVELOPER_J2EE
SAP_XI_CONFIGURATOR_J2ee
and refer the below blog
CTS+ Configuration for Process Orchestration (PI/PO) and AEX 7.31 (JAVA Only Stack)
regards,
Harish -
CTS+ configuration in XI. Need help.
Hi All,
I have followed the How to Doc " Enhanced CTS configuration in XI" from the link below
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20965d21-6c93-2a10-d4a0-9f3c27a939fc
But, functionality is not working. I need advice from any body who followed this document to configure CTS+.
With regards to Pre-req, I have applied all of them correctly in terms of Tp ver, support packs and Java support packs.. I am 100% sure about it. Our Netweaver system is Netweaver04S/Netweaver 7.0 SPS 14.
To begin with have some confusion from the document from Page 15 point 8 and page 18 point 15 regarding the CTS export directory. Our SAp install directory is S: drive and rest of the path. I have created folder called "ctsExport" in S:usrsap<SID>SYSglobalxi, but for the same system (dev) I am not sure how they can point to two different drives? Is that error in document?
and Further in points 25 and 28, for name "com.sap.aii.ibdir.core.transport.exportCtsDirectory" corresponding value is "true" and not the directory path as shown in screens. I am not sure, where I am getting wrong and how to correct the problem.
Please advice..
If I could correct problems in these areas, I will move forward to correct any other problems...
Regards,
KHello,
Please try to use the guide for your SP version, it's' may help you better https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00246ec1-dec5-2a10-58b9-e111c091c00b
BR,
Franklin -
Hi,
Currently we have cts+ already configured for our portal systems in our landscape through solution manager 7.0.
Recently we had setup a new solution manager 7.1 and need to perform cts+ configuration using this new solution manager 7.1 as we are planning to remove our old solution manager 7.0 very soon.
We are using NWDI system for transporting our portal transports.
Please help me with steps on how to configure cts+ using solution manager 7.1 using NWDI.Hi Naveen,
Please find given below BBPCRM & SAP_BW version..
BBPCRM 500 0013 SAPKU50013 BBPCRM BBP/CRM Supp. Pack.
SAP_BW 701 0003 SAPKW70103 SAP Business Warehouse Component Supp. Pkg.
This problem is not only with Bussiness process tab (T-Code: Solution_manage) also System monitoring Still i searching solution for this But once we are restarting System that time this problem is not occuring but after some time system is giving this DUMP
Regards,
Suresh -
Hi guys,
I have one problem when I try to export a software component via CTS. This is the first export that I will release after the CTS configuration.
The transport domain is the SAP PI developent enviroment it's composed with DEV, QUA and PRD systems.
When I try to export one software component I obtain the next error in Integration Repository:
Default request is not configured (for applType: XI, user: username, sid: XD1, SC: b38bcd00e47111d7afacde420a1145a5). Create a corresponding default request (e.g. via your Transport Administrator)
I have configured one standard request for this issue.
Can anybody helpl me?
Best Regards
IváHi Arun
Google "CTS+ Configuration Guide" and you'll find multiple PDF guides (most 7.0 stuff is still valid for 7.1 in terms of CTS+ it hasn't changed that much):
Best practices for CTS+
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10456aac-44f7-2a10-1fbe-8b7bcd7bcd58?overridelayout=t…
CTS+ for Portal Environment
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0ebf83b-6201-2b10-b58b-c14d3d3b6f61?overridelayout=t…
7.1 SP specific guidance:
Help has guidance as well where you find the relevant steps:
Performing Configuration Steps for Non-ABAP Transports - Change and Transport System - SAP Library
In other words plenty of guidance how to do this without the need for someone to detail this out . I would say, start by following the help.sap.com steps and use those other PDF guides as a reference to help you out. If you have further questions while configuring or if you get stuck, post another question on SCN forums.
Kr
Tom -
CTS+ configuration for CRM Java stack
Hi gurus,
I want to implement CTS+ configuration for java stack of CRM system.
Please any one help me on this is there specific setting for that.
In the process of configuration it is asking for SDM password.
So I am confused that wh which SDM Password will be supplied SOLMAN or CRM SDM password.
Please help urgently.
Thanks in advance
DhirajHello Dhiraj,
You might want to have a look at SAp Note 1045501, it states:
> The "Best Practices for Implementing CTS" guide in SAP Developer Network (SDN) explains the architecture and components of CTS. It contains descriptions for possible system landscapes and configuration examples for various application cases. https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10456aac-44f7-2a10-1fbe-8b7bcd7bcd58
Please follow the link. Then just click on the view how to Guide button. This document talks about the dual stack landscape.
I hope you find it a bit more helpful than the first document.
Regards,
Paul -
Hi,
I am doing CTS+ configuration. We have DEV(7.00 SP14), QAS(7.00 SP14) and SOL(7.01 SP5) system. All are dual stacks. My requirement is i have to transport DEV(Source) to QAS(Target) using SOL(Communication) system. I have confugured SOL system as a domain controller.
I have completed all the configurations. When i do testing, i come to know Target System field is empty in CTS_BROWSER.
Can you please suggest where i did mistake? Thanks in advance.
Thanks,
Ramesh.N
Edited by: Ramesh Narayanan on Aug 30, 2011 5:09 PMHi Daniel,
if you configured a transport route which consists of DEV, QAS and PRD, this is the way a transport request will go. You are not able to change this in the transport Organizer Web UI. Only if you had configured more than one QA - e.g QA1 and QA2 - then you would be able to choose one of these two systems in Transport Organizer Web UI.
Kind regards
Karin -
ChaRm and CTS+ configuration
Hello Experts,
Can anyone forward ChaRm and CTS+ configuration document to me, I have received Business requirments and trying to configure the same. I would appreciate step by step configuration guide for both.
Thanks in advance.
Regards,
Swapnil Lakhe
lakhess<at>gmailHi,
Please find the below steps for Charm confirguration :
1.SAP Solution Manager Implementation Guide SAP Solution Manager Basic Settings SAP Solution Manager System Activate Integration with Change Request Management
Click on the Execute icon with the text Activate Integration with Change Request Management
Double click the Activate Change Request Management and set up client
It will show the following window type your Change Request Management Client Number
Click on the Integration Solution Manager
If you have different system for Change Request Management gives the RFC destination for that System.
Click back button
Double click on the Integration Change Request Management
You have to maintain the following data here
Column 1: Application: CHARM
Column 2: + : W
Column 3: RFC Destination: NONE
Column 4: + : CUST620
Column 5: + : 1.0
2.SAP Solution Manager Implementation Guide SAP Solution Manager Scenario-Specific Settings Change Request Management Standard Configuration
General activities
Click on the Execute button with the text u201CActivate BC Sets u201C
It will take us to SCPR20 Transaction which is used to Activate the BC sets
Select the BC set SOLMAN40_CHARM_BASICFUNC_001 , it is for solution manager version 4.0
Click on the Activate Button
Create a Request for Activating the BC Set
Click Save button to assign with a TP .Other wise Create a new Transport Request (TP).
In Overwrite Data Box, select the Overwrite data, and in Activation Mode box select Expert Mode Option , Click on OK Button to activate this BC set.
3.SAP Solution Manager Implementation Guide SAP Solution Manager Scenario-Specific Settings Change Request Management Standard Configuration
Transport Management System.
In Order to do all the Settings under the Transport Management System do follow the steps.
All the below settings has to be done in satellite system not solution manager
1. Define Transport Routes for System Landscape
Go to Transaction STMS
Choose Overview -> Systems.
Double-click each system.
The Display TMS Configuration: System <system ID> screen appears.
Select the Transport Tool tab page.
If the entry CTC does not appear in the Parameters column, enter it there, and then in the Value column, enter 1.
Save your entries.
Configure Transport Strategy
Go to Stms Transaction
Go to Menu Overview Transport Route
Doubt click on Each System . In the Transport strategy group box, select Single transports
(since only Import Single and Import Project All are used).
In the Quality assurance group box, deselect Delivery after confirmation
1. Choose Continue.
Activate TMS Trusted Services
Choose Overview -> Systems.
Choose Goto -> Transport domain.
In Management Tab
In Security Options group box
Click on Trusted Services Active
Go to QA Approval Procedure
You should not assign any QA approval system there
Save your Entries
Call Transaction STMS.
Choose Overview Systems. The system overview appears.
Choose SAP System Create Domain link.
The dialog box Request for Linking 2 Domains appears.
Enter the system name, host name and system number of the domain controller you want to link to, and then confirm your entries.
Your SAP System performs the following actions automatically:
o Generates the required RFC destinations.
o Sends the address data of the controller to the controller in the other domain.
You can now see that you have requested the domain link to the other domain in the system overview.
Click the Distribute and Activate TMS Configuration ICON on the Application Toolbar
After that Go to SAP System Check Connection Test, transport directory and transport tool
Check all once whether it is having inconsistency.
4.Check Configuration of Transport Domain
Log on to every domain controller that is connected to your transport landscape.
Call transaction STMS
Apart from the information "You are logged onto the domain controller", you should not be able to see other messages or warnings.
Generate RFC Destinations to Client 000
Call Transaction SMSY.
Go To Landscape Components
Go to your Satellite System
Click on the Domain Controller System
In the Right side Tab strip, Click on the Clients, Select 000 client Click on RFC generate Button
Give the User name for Read Access and Change Manager
Click the OK Button to Continue
Add Import Authorization to Operator/Administrator
Make sure that the operator and administrator users in client 000 of the target systems have the same name as their user in the Solution Manager system.
Assign import authorization to the operator and administrator users in client 000 of the target systems (SAP_CHANGEMAN_OPERATOR and SAP_CHANGEMAN_ADMIN roles).
5.Set Project Assignment of Requests as Mandatory
If you want to enable your change request project is mandatory while creating a request for workbench or customization object, follow the steps
Go to Transaction
/N/TMWFLOW/CMSCONF
Select the Change Request Management System
Double click on the Project Assignment column
A new windows opened as follows
In the Attribute Required for Requests Box , Select Mandatory on the Default for all clients List
In the Client u2013Specific Setting Activate the tick mark of the Right side of the Table Control
6.Change Transport Request Option
Requirements
u2022 Repository changes are permitted in the system where you want to change the transport request option. (If they are not, proceed as described in SAP Note 327351.)
u2022 You do NOT use template projects.
Go to Transaction SE38
Enter the following Program SAPLSCMA
Click on the Display Button
Click the Find icon and type the following keyword,
G_ACTIVATE_CORRECTION_SYSTEM
Click on the OK Button to search
Using Modification, Edit the Program in Change Mode
Delete the following lines ,
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
And Insert the following lines ,
no_automatic_recording = 'X'.
Call Transaction SCC4
Select the Change Request Management Client and Click the Display ICON.
Go to Transaction SE 11
Enter the table SCMATREED
Choose Display
In Menu Click on Goto -> Indexes,
Choose Yes in the dialog box, and enter the index name 001, and the following short description: Index for Node in SCMATREE.
Maintain Number Ranges
Go to Transaction SNRO
Enter Object Name /tmwflow/M
Click on Number Range Button on the Application Toolbar
Click on the Change Intervals Button
For the new interval, enter 01, and use the F4 Help function to select a value for the From Number field.
The system returns 000000001 to 999999999.
Save the Entries
Come to the SNRO First Screen again; follow the same procedure for the following objects
/tmwflow/d and /tmwflow/v.
SAP Solution Manager Implementation Guide SAP Solution Manager Scenario-Specific Settings Change Request Management Extended Configuration Schedule Manager
( Note in HLL We have using the Standard SAP Variants )
Create Customer-Specific Variant for Task Lists
Click on the Execute button
To Create a New Entries, Click on the Create New Entries Button
Type the Variant Name in the Variant Column Starts with the name space of u2018Zu2019, and in the Description Column you can maintain the description
Define Additional Tasks for Task Lists
Create Customer-Specific Header and Footer Tasks
Install Template Report
For all the above Refer IMG Node, follow the Steps
SAP Solution Manager Implementation Guide SAP Solution Manager Scenario-Specific Settings Change Request Management Change Transaction
Check Installation Activities
Make sure that you have performed the iBase IMG acitivities before you proceed with the Change Transaction IMG activities: SAP Solution Manager -> Basic Settings -> SAP Solution Manager System -> Service Desk -> iBase.
Check the all the following settings has been done .
Initially Create and Assign the Component Systems as iBase Components
Manually Create and Assign the Component Systems as iBase Components
Assign Business Partners to iBase Components
In the following Link all the Settings comes with BC Set.
SAP Solution Manager Implementation Guide SAP Solution Manager Scenario-Specific Settings Change Request Management Change Transaction
USER Authorization
Administrator
SAP_CM_SMAN_ADMINISTRATOR
Change Manager
SAP_CM_SMAN_CHANGE_MANAGER
IT Operator
SAP_CM_SMAN_OPERATOR
Developer
SAP_SOCM_DEVELOPER
Regards
Sreedhar Reddy.A -
Hi All,
My question is :
Once we have configured the ABAP-Stack of a dual-stack system into the transport domain through CTS, so can we now move the JAVA-based objects as well or we need to do something else also.
If so, what is that?
RegardsHi Chilbul,
Your question is pretty vague. As per it, we don't know if you have actually carried out all the steps of CTS+ configuration prior to including the abap stack in transport routes or not.
If you have already completed CTS+ configuration and this was the last step you did, then your java developers should be able to include their objects in a transport request.
However, if you haven't done the CTS+ configuration yet, then please do that. For reference, these are some documents that should help you:
CTS+ config for dual stack systems -->
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10456aac-44f7-2a10-1fbe-8b7bcd7bcd58?quicklink=index&overridelayout=true
Other helpful guides:
/people/dolores.correa/blog/2009/06/05/cts-configuration-in-solution-manager-70-ehp1
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0249083-c0ab-2a10-78b8-b7a7854b1070
Regards,
Shitij -
ChaRM & CTS+ configuration for BOBJ 3.1 and 4.1
Hi ,
I am looking Change & Release Management control using SAP solman for BOBJ object .
I have checked the few link for ChaRM & CTS+ configuration guide for BOBJ 3.1 and 4.1 version.
But still not more clear about the BOBJ configuration in CHaRM.
Please post the related details or link for the same.
Also i am looking how to systems stay in sync using the ChaRM for BOBJ version.
Rg,
Karthiksee this powerpoint I picked up a few years back > https://drive.google.com/file/d/0B1emKh_80XNDV1haY1dzRW9sc28/edit?usp=sharing
Have you checked this guide?
http://scn.sap.com/docs/DOC-28446
Hope this helps! -
CTS+ configuration for NWDI - Development configuration error
Hi All,
I really need some help on this. we are configuring CTS+ on Solution Manager system for NWDI, EP landscape (EPD, EPQ,EPP) and SLD system.
we made EPD as development system and trying to use CM Services to configure the NWDI scenario SDA/SDC Deployment.
I have created all NON-ABAP systems and created the CTSDEPLOY Http connections. I am getting the popup to configure the Development Configuration,"What is the User I have to use here and of which system?" and what are the authorizations required to configure this.
As soon as the popup comes, It is asking for the user ID and Password. I am entering Solution Manager (Admin user with all CMS actions also assigned) user then it is giving the following error on the screen. " Could not connect to SLD; contact your System Administrator: User SAPNWDI is not allowed to do this function "
I have give the SLD url correctly, and the admin user for SLD and Password. I have cross checked the user for password, every thing is fine.
I really appreciate your help.
Thanks,
Ramu J.http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
Hi Ramu,
Pls answer me for below.
specified SLQ as my SLD
1.
You said SLQ is you SLD, but You configuring CTS on solution manager. but solution manager has its own SLD.
a. SMG solution manager SLD
b. SLQ is also SLD
If there is two sld then you should get error
" Could not connect to SLD; contact your System Administrator: User SAPNWDI is not allowed to do this function "
This is becuase you are giving the user which is present in SLQ SLD but CTS is checking the Solution manager SLD.
For CTS you should have centralied SLD.
2.
Can you tell me one more thing, in CTSDEPLOY do I need to give the SMG host and port number or EPD's host and Port number?
You have to specify the host and port in CTSDEPLOY of the system on which CTS contoller should work i.e EPD or SMG.
To resolve your all this problem first of all make the SLD as central . i.e Make solution manager ( CLQ ) as SLD or SLD system in you landscape ( SLQ ) as SLD.
don't keep two different SLD . If you keep Solman as its own SLD then CTS will search component from SMG SLD
Pls follow the guide
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
3.
Could not connect to SLD; contact your System Administrator: User SAPNWDI is not allowed to do this function
Can you tell us in which system this SAPNWDI user is present
Check the SLD of of system in which SAPNWDI user i present
system is whether in SMG SLD or SLQ SLD
If you are not clear with my above suggestion pls let me know.
Thanks
Anil
Edited by: Anil Bhandary on Oct 24, 2009 10:28 AM -
CTS+ Configuration - Web UI is not displaying JAVA transport requests
Hi,
After Configure CTS+ in XI landscape.
Issue 1: Web UI is not displaying any of the JAVA transport requests
Issue 2: The below option is not visible in STMS.
STMS >> Overview >> "Import Queue Web UI"
Completed the below settings,
RFC CTSDEPLOY is working fine.
I have maintained proxy class and logical port in transaction "LPCONFIG"
Activated CTS_BROWSER in SICF
Domain Controller : DEV
Also, Validate the above configuration and suggest.
Environment : SAP Net weaver 7.0
Product : SAP XI Dual stack system.
Thanks, GaneshHi
I believe you may have 2parts UI
one is server
another one is
login
repository and user name
Did you connect give correct repository name?
regards
Muthu -
CTS+ configuration on separate stacks
Hello,
I'm configuring CTS+ on a SAP NETWEAVER 7.0 in EHP1.
I've finished the configuration of the ABAP and the JAVA stack but when i want to check the transport tool on the JAVA production side , i've got this error:
Check Transport Tool 17.12.2010 15:00:28
PBJ PROD BI JAVA
tp Interface u221A
Transport Profile u221A
RFC Destination u221A
tp Call u221A
Deploy Web Service
Web Service CTSDEPLOY is active in client 000 u221A
Destination Host=<hostname>, Service=50.. u221A
Proxy CO_TFLDEPLOY_PROXY_VI_DOCUMENT u221A
Connection Test Length of test call: 22 msec u221A
File Transfer Error code: 8
Deploy Tool u221A
I can't find why i get this error code, I want to check in the tp log but nothing appears.
Can you help me please ?
Kind Regards.Yes. the scenerio is very much possible.
Please refer to 3.1.3 for different ABAP and JAVA stacks in the following document http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10456aac-44f7-2a10-1fbe-8b7bcd7bcd58?quicklink=index&overridelayout=true
And then you need to integrate NWDI with CTS+,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0f75302-bf8b-2b10-d991-ee42c8de8eec?quicklink=index&overridelayout=true
Thanks,
Bidwan -
Is CTS+ configuration a prerequisite to Quality Gates ?
Hello,
I have heard that CTS+ has to be configured first before I can configure Quality Gates on my Solution Manager system.
Does anyone know if this is true?
Thanks,
JudithDear Judith,
According to SAP Note 1256490 it states TMS has to be activated.
So this would cover ABAP systems.
The Note also makes reference to Note 1256490 - regarding an issue for NON-ABAP systems and CTS+,
which would indicate that TMS is the prerequisite transport for ABAP systems, but it can be infered for
non-ABAP systems CTS+ is the required transport.
Hope this helps.
Regards,
Paul
Maybe you are looking for
-
Hi, Ever since I updated to mountain lion on my macbook pro 13 inch. All the videos that contain adobe flash player has been choppy. Please Help!
-
10.1.3 Faces: Javascript error on PPR
Hi all, I'm getting a Javascript error during PPR in IE 6.0. This error does not appear in FF 2.0. The error is "Invalid Argument" on line 2984 of adf/jsLibs/Common10_1_3_2_0.js: form.removeChild(tempParams[paramName]); Research suggests that this er
-
Suddenly cannot send messages from ipad. Can send from iPhone and they show up on messages but when sending from ipad a they say not delivered
-
Hello All, APEX Version: 4.0.2.00.07 DB: Oracle 11G R2 WebServer: EPG Wallet info has been configured at APEX Instance Level, so APEX can access SSL enabled sites. When I run following code in page process, to make SOAP request to our intranet JIRA i
-
Account Assignment Features through Transaction PP01
Hi All, Using PP01 Tansaction i try to do the Account Assignment feature for a Org. unit. When i enter both company code and personal area it is giving an error message as "Company code 0001 has been set in the structure above" Let me know how can i