CTS+ : Deletion of an iView

Hi experts,
Just a quick question about the transport of portal content by CTS +: Is it possible to transport the deletion of an iView?
Thank for your answers

CTS+ transports EPA files, so everything that is possible to transport by an EPA can be transported by CTS+. In < 7.3 you cannot transport a deletion of a single iView. Using the XML transport you can transport the whole content of the folder and state: delete first.
br,
Tobias

Similar Messages

  • How can we know who deleted the objects (iView, Page, ...) ?

    Hi All
    Can you tell us how to find the Portal user id that deleted iView ?
    Thank you very much,
    Anek.

    Hi
    As far as I know, such an audit trail is not created.
    It is really down to individual companies to set in place standards and controls for migrating metadata between environments. Most companies have their DBA or senior administrator do such migrations and don't let multiple people have permission to do so. Even though you might have multiple Discoverer administrators you really should have one Discoverer controller who has overall responsibility.
    I think you should take what happened as a wake up call to enforce stricter control going forwards. Migrating from production to test is nowhere near as dangerous as the other way round.
    Best wishes
    Michael

  • Accidently deleted UWL iView

    Dear Expert,
    I accidently deleted the UWL iview and pages. Do anyone know how to create it back. I am on ECC 6.0 and i believe the UWL is an web dynpro application. Anyone know the exact application name and i could recreate back the webdynpro iview?
    Thanks.
    Regards,
    Bryan

    Hi,
    UWL iview is not a WEbdynpro application instead it is based on the par file com.sap.netweaver.bc.uwl.ui
    You can create an iView based on the component of this par file.
    Create New iView--> Baesd on portal Component-> com.sap.netweaver.bc.uwl.ui --> Select UWL as the component which should act as UWL iview for you.
    Hope it helps

  • Delete an iView

    Hi All,
    I have a problem,
    I'd like to delete a WebGui iView; the system tell me the object has dependent objects that will be invalidate, but if I answer YES nothing appens...
    I checked around my Portal Content but I'm quite sure I deleted every referred...
    I had this problem only because I COPY (!!!) this iView lots of time using it on different "subcompanies", but the original one as a ID Prefix something like com.company.subcompany1, and it's the same also on the copied one (not com.company.subcompany2).
    Is there any way to see the dependent objects???
    Regards.

    Hi Giorj,
    try the PCD Inspector:
    https://www.sdn.sap.com/sdn/downloaditem.sdn?res=/html/PCDInspector_download.htm
    Regards, Karsten

  • ESS iviews blank screen

    Hello ,
    I am on EP7.0 and getting the blank screen for some iviews for ESS ,I have already modified the code for those services for which I am getting the blank screen using NWDI and I am getting blank screen only for services for which I modified the code ...
    When I goto Content Admin.->Webdynpro and try to run it runs successfully , also the Applicaiton name and namspace properties for the correspondng iviews are missing
    Please help.
    Message was edited by:
            SubhashTripathi

    Hello Subhash,
    We had a similar thing happen to us in NetWeaver Portal 70 when we went to SP10. There were some "Z" menu area customizations done on the backend and on the Portal side we created copy of the iView changed the applications property to point to the "Z" menu area ex:
    sap.xss.menuarea=ZEMPLOYEE_BENEFITS_ERP2005
    We then placed this iView on the page and flagged the original one to be invisible in navigation. When we went to SP10 even though it was flagged as invisible the portal was looking for the "Non Z" area menu. We fixed it be deleting the original iView from the page instead of merely flagging it as invisible in navigation.
    Good luck,
    Bert

  • Unable to deploy the PAR file after the first successfully deploy.

    Hi, my gurus.
    I found a problem when I developed the JspDynPage.
    That is after  first deploy the PAR file successfully,I found there is a miss in portalapp.xml, so I correct the miss and then do a second delpoy.But it didn't work.
    I goto the Server's file system to find the portalapp.xml,
    the content of xml was still the old one.
    Anyone can help me, I don't want restart the J2EE Engine,
    because the restart will last for 15mintues.
    Thanks.

    Hi,
    I dont think there is no need to restart your J2EE Engine.
    Becuase i dont think you have a requirement to create an iview from that PAR File
    If it is so delete the previous iview and create a new iview.
    From the updated PAR File in ur System
    Every Time when you uplaod the PAR the old instance will be lost.and new changes will come into effect on each upload done by you.
    There is no question of restarting ur J2EE Engine.
    Whenever there is a change in you PAR.
    Hope this Helps you.
    Thanks & Regards,
    Lokesh.
    Reward Points if helpfull

  • Problems deleteting PCD-objects at level 9

    Hi
    Recently our PCD-structure have gotten deeper. Our PCD-structure starts with the folder "Portal Content" at level 1. As a result of the structure getting deeper, I am experiencing problems with deleting PCD-objects, iViews or pages, at level 9. When I right-click on the object and select delete, the tool for finishing the delete never appears.
    Level 8 objects are ok. I am at SAP EP V6.0 SP13.
    Has anyone else experienced problems with this. Were you able to find a workaournd?
    Help would be much appreciated.

    Hi Reidun,
    I am using EP 6.0.14.0.0
    I tried it and I am not facing this problem.
    I think..I came with a same kind of problem earlier.
    When I try to create the directory structure in my local File System using Java it was not creating deeper directories more than level 7.
    This is because of some restriction in char length I think.
    Do onething..Try to Reduce the length of your folder/roles/pages/iviews  names.
    like
    Sample :
    If you have
    "MyPCDFolderStructureOne" then reduce it to
    "PCDOne" - just for sample
    Regards,
    Karthick

  • Error initiating travel expense form

    Dear Guru's,
    We have an issue displaying the Travel Expense form in ESS. We are not using the PDF forms but the HTML , no ADS has been set up and followed the exact steps mentioned in SAP Note 1032311. So we deleted the URL parameter in the URL parameter from the resource and set the PDC path as a non-static URL to the tripform. We deleted also the Iview property ....UsePDF=true.
    Next we changed the setting in the Travel Management Expert View refering to Adobe Forms from 0 into 1, and we modified feature TRVFE using the SAP form PTRV_EXPENSE_FORM .
    We tested the forms in trx TRIP, PR05 and PR_WEB_1200 and all results were positive since the form is displayed. However using the Iview create travel expenses the ' Error intiating trip forms' remains. The Iview My trips and expenses gives the same negative result trying to display/print the form. However the Iview display trip form seems to do something and is only given the error that the trip parameter for the pernr is missing while previewing it, which is clear since no trip has been selected.
    Help needed.
    Kind regards.

    Please check you have the correct roles assigned for the URL in PCD path as this is a common cause of this type of error
    As per the note..it needs to be;
    ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_fol
    der/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/
    com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_trave
    l_expenses/com.sap.pct.erp.ess.tripform
    Can you open it from portal in administrator mode?
    Also check note 944221 to check the ADS config.

  • Enabling Personalize option in the Masthead.

    Hi All,
              I want to assign personalize option in masthead to the users so that they can manage their passwords, and also i want to hide other options available in the Personalize like Changing themes etc. I want to restrict the user only to password management. I am getting the the personalize link in the masthead only if i assign eu_role to the user. My queries in this regard are listed below:
    1. Is it mandatory to assign eu_role to the user to get the personalize link in masthead.If not then how to achieve this.
    2. How can i modify the Default Standard Portal user role(eu_rule) to restrict the user from changing themes and only restricting them to manage passwords only in the Personalize link in the masthead.
    I hope somebody must have explored these areas. Awaiting a suitable reply.
    Thanks and Regards,
    Sarabjeet Singh.

    Hi Sarabjeet,
    Just want to make sure everything is clear.
    The navigation service gets the navigation hierarchy for the current user. The iViews/pages underneath any top level nodes that has a merge ID of PORTAL_PERSONALIZATION are placed in the personalization window, and the top level node is not displayed in the navigation iViews.
    To add personalization iViews for a new roles, you can create your own workset of personalization iViews and add it as an entry point in your role.
    To delete default personalization iViews, simply delete them from the standard user role (don't worry, these are just delta links which you can restore).
    In SP14 and above, there is a navigation cache, so you may need to clear the cache if you change the structure within a role.
    Hope this help.
    Daniel

  • Hide or remove delete button - ESS personal data iView

    Hi, regarding for example ESS(50.4) personal data overview iView. 
    How to hide or remove delete button in the personal data overview iView screen(I know that this can be done on the ITS server side (web studio), but I want to do this in R3)
    /Best Regards
    Patrick

    Achim was right on. Edit/Change the Internet Service in R/3. A few things to consider though....
    (1) if using the original service, you may want to create a copy of theme 99 into your own theme (any number will do...99 is just the default theme). If doing so, be sure to change the service's service file (yeh, I always loved that about SAP's naming) to point the ~theme paramter to your new theme.
    or
    (2) Copy the entire service into your own "Z" service. Then modify the templates as you wish. You will need to point the iView to this "Z" service too.
    Also, it is best to do it via SE80 vs. file level because then it will be part of a transport and follow the correct path through the landscape.
    Now, if you really want to go back to R/3....find the function module or program the transaction code for your service actually calls, make a "Z" version of it, modify it, create your own "Z" t-code to call it, and THEN modify the internet service's service file (either the original SAP one or a custom version) to call your new "Z" t-code. Lot of work...yes, I know....but that's the way it's done if you gotta get back down to the ABAP level.
    Hope this helps!
    Message was edited by: Christopher Solomon

  • Delete Attachment link and the launchWebdynpro button in the UWL iview

    Hi,
    Can anyone help me in deleting or hiding the Attachment link and the launchWebdynpro button in the UWL iview. I dont want to do it in the iview properties which would affect all the tasks. Is there a way I can do it in the backend.\
    I appreciate the help.
    Thanks

    Hi Surjith,
    I have the same problem. How can I remove the link? After I called the mentioned function module, the attachment was removed (content) but in the UWL the file name is still there:
    From UWL:
    myFile.pdf by WF-BATCH (94 kb)
    myDeletedFile.pdf   <-- I removed this one with the function module
            CALL FUNCTION 'SAP_WAPI_ATTACHMENT_DELETE'
              EXPORTING
                workitem_id     = me->mv_wf_instance_id
                att_id          = ls_att_id
                delete_document = abap_true
              IMPORTING
                return_code     = lv_return.
    Could you please help me?
    Thanks,
    Thomas

  • PI 7.1 CTS+ - Manually deleted object in PRD system

    Hello,
    We have PI 7.1 with CTS+ configured. However, there was a condition that an object was deleted manually in PRD system not via CTS+. After this all the transports that were connected to that object and transported to PRD system were imported successfully but ! the changes weren't set in PRD. That means, the CHR transported to PRD but the changes are not applied.
    Any idea how t solve this problem ?
    Please advice,
    Dimitry

    Hi Dimitry,
    please check if the XI object you're trying to import have a lower version in PRD than in DEV/QAS.
    In the opposite way if the XI object has a more recent version in PRD you'll not be able to update the object, since for the sistem the version you're trying to import is an old one.
    Hope this help
    Best Regards,
    Francesco

  • Delete CTS Projects not linked to IMG projects anymore?

    Hello all,
    I have a few CTS Projects in my Solution Manager system that I am not able to delete because the corresponding IMG projects have already been deleted.  I know these CTS projects exist still, because they are all listed in the "Project" drop-down list in the Transport Organizer Web UI.
    Any insights on how to do this?
    Thanks,
    Michele

    hi,
    I havent really worked upon this, but has the IMG project been delinked from SOLMAN Project list? Or has it been deleted altogether from the satellite system? Probably you can try and check in the dev system and if it still exists there, then delete the CTS project.
    Regards
    Sneha

  • Customising Business Package iView by deleting fields/column

    Hi,
    I wanted to know the tools/procedure require to customise existing business package iViews (in a MSS implementation).
    If we want to say delete/add a particular field or column in an existing iView, what tools do we need? Visual Composer or Web Dynpro? Is there a step-by-step guide available for this?
    Your input is greatly appreciated!
    Thanks,
    Aniruddh

    HI Aniruddh
    If you want to change the iview, upload the par file of the iview to NDS, save it in another name.
    Then make the necessary changes, and again upload to the portal.
    Then make an iview based on the new par file.
    But I don't think SAP provides the source code along with the business package. So making the changes to the par file will not be a straight forward method. You will have to decompile the class files and make changes in them.
    It is a tedious activity.
    Regards
    Rajeev.

  • Customising existing iView by deleting fields/columns

    Hi,
    I wanted to know the tools/procedure require to customise existing iViews (in a MSS implementation).
    If we want to say delete/add a particular field or column in an existing iView, what tools do we need? Visual Composer or Web Dynpro? Is there a step-by-step guide available for this?
    Your input is greatly appreciated!
    Thanks,
    Aniruddh

    That is a question which requires a long answer. basically both tools were created as UI-Tools, VC as generating tool for UIs (the old name GUIMachine pays some respect to that) and WD as metadata-driven UI tool (which also generates the UI-code).
    While VC originally was supposed to be something like the Rolls-Royce under the "iView-Wizards", WD was to be supposed to be the new SAP UI for the ABAP and Java-world and be a successor of ABAP Dynpro and HTML-B.
    As it turns out, UI alone without access to the BAPIs, WebServices etc. is not enough, so both were enhanced far beyond their original intentions.
    VC is now a browser based tool (thin IDE) that allows you to build applications, without ever touching coding.
    WD is a tool included in the NetWeaver DevStudio (based on Eclipse) and therefor more of a "fat IDE".
    In the coming NetWeaver-release out of VC-model UIs as WebDynpros (or other UI-technologies like Macromedia Flex) will be generated, so both worlds will be integrated.
    For quick applications without writing code (e.g. done by business experts), VC is a good tool.
    For applications that need to be pimped, i.e. code added to the generated code, WD is a good tool.
    And if I start now talking about CAF or ESI then it will be a very long night...
    Mario

Maybe you are looking for