CTS+ in NW 7.2

Hi,
We have going for NW 7.1 in few months for our PI.
I have heard that SDM is not there in NW 7.1. Is it correct?
If yes then how CTS+ will work as we have defined the SDM ID and passworin while configuration of CTS+ onout NW 7.0 system at present.
Your help will be greately appreciated.
Regards,
Sume

Hi,
in 7.1, the Deploy Controller is needed for deployments. So the only thing that you have to do is change the deploy port. If you go to the details of your system in STMS, you should see a parameter 'DEPLOY_URL'. This parameter should have a value like http://<server>:5xx18 where 18 is the deploy port of SDM. you would have to change this to http://<server>:5xx04. In addition, you have to provide a user who has deploy permissions on the engine. To do so, choose Goto -> SDM / DC User /Passwort while you are in the details of your system in STMS
kind regards
Karin

Similar Messages

Error while transporting using CTS

Hello Everyone,
While transporting the ESR changes from Dev to integration environment i am getting this error.
Its a SOAP to RFC scenario and first time it worked fine. today when i did some changes and wanted to move again through CTS its giving a problem . Its SAP 7.11 version.
CTS Deploy Service - Version 0.93 06.03.2007
========================================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL =
SoapFaultCode:5 Authentication failed. For details see log entry logID=1ADC6A3175029F4D000000040025
>>>80B2 in security log.
Deployment
End date and time : 20120119234349
Ended with return code: ===> 12 <===
Thanks
Ravi

Hi Ravi,
Please check this forum thread which talks about same issue:
CTS+ For PI Error: SoapFaultCode:5 Authentication failed
Regards,
Ashutosh

CTS+ Transports in SAP PI 7.1

Hi experts,
we have a new installed SAP PI 7.1. Our scenario is that we have a single SLD for each PI System on dev, test and prod.
Now we are facings some troubles regarding the SLD setup. Our target is to use CTS+ to transport IR and ID objects. In the how to guides I found in SDN I found always settings within the visual admin to get this scenario run. But as I understood there is no more visual admin in SAP PI 7.1.
What are the required steps to connect my sld from dev --> test --> prod and what is additional to perform to get my ID objects transported from dev --> test --> prod.
Regards,
Björn

Hi Bjorn,
CTS+ is a transport mechanism used to transport NWDS, IR, ID objects.....basically JAVA objects......
For CTS+ and NWDI...check it :
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d96022-9df5-2910-90b8-8e0580e0987e?overridelayout=true
Regards,

Error when I am trying to export a SDA/SCA from CTS+

Hi,
We have configured NWDI and using CTS+ for transports. We are using the DI CM Services concept. So we didn't create any Tracks in CMS.
When I am trying to create an export from CTS+ system -> Development Configuration-> DI Export Services -> SCA / SDA export.
In this wizard it is successfully running 3 steps., but in 4th step (CTS Request), when it is supposed to generate the Transport request using the transport organizer, it is giving the following message.
Error during read of Transport Organizer URL for system 'EPD' and user 'ABC': !NO_DEST_DETAILS_CHECK_STACKTRACE
Error during read of transport request for system 'EPD' and user 'ABC': !NO_DEST_DETAILS_CHECK_STACKTRACE!
I tried to find some info in the application log file but did not find much information except couples of line below.
#1.#0019B9C3EE7C006500003FD0000007E500047FFB5C5B95BE#1266617469867#/Applications/DI/Export#sap.com/tcdictsconfigservice~appl#com.sap.di.cts.export.service.core.DIExportServiceBean.getDefaultRequest#ABC#44454##smp.com_SMP_519331850#ABC#a3cf42441da311dfac9d0019b9c3ee7c#SAPEngine_Application_Thread[impl:3]_21##0#0#Info#1#com.sap.di.cts.export.service.core.DIExportServiceBean#Plain###Failure: Error during read of transport request for system 'EPD' and user 'ABC': !NO_DEST_DETAILS_CHECK_STACKTRACE!#
I really appreciate, if some one can help.
Thanks,
Ramu J

Hello Ramu
I see that you have not been able to find a solution for this.
Can you provide some more information which may help the other SDN posters to assist you?
Thanks
Kenny

Error when adding EPA file to transport request via CTS

I have a rather strange problem. Sometimes when attempting to add an EPA file to a Transport Request via CTS I get the following error in my logs with a corresponding short dump. This does not happen all the time.
#000255D36E8F005B00015391000003DC00046C0470FF1359#1244666238275#com.sap.portal.pcdadmintools#sap.com/irj#com.sap.portal.pcdadmintools#MOROZOWSKIJO#24750##rp1.conair.com_RP1_2406850#MOROZOWSKIJO#28167c7055fe11dea0f1000255d36e8f#SAPEngine_Application_Thread[impl:3]_10##0#0#Error#1#/System/Server#Java### [com.sapportals.portal.pcd.admintools.export.ExportCTSHandling] Could not attach epa file to transport request
[EXCEPTION]
{0}#1#com.sap.tc.di.draft.ts.TsExecutionException: Error executing function (check stacktrace for details):CTS_FILE_APPEND_TO_REQUEST, (service=com.sap.tms)
     at java.lang.Throwable.<init>(Throwable.java:216)
     at java.lang.Exception.<init>(Exception.java:59)
     at com.sap.tc.di.draft.ts.TsException.<init>(TsException.java:19)
     at com.sap.tc.di.draft.ts.TsServiceException.<init>(TsServiceException.java:16)
     at com.sap.tc.di.draft.ts.TsExecutionException.<init>(TsExecutionException.java:16)
     at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoExceptions.throwTsServiceException(TmsJCoExceptions.java:74)
     at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoExceptions.throwTsException(TmsJCoExceptions.java:35)
     at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter.addFileToRequest(TmsJCoAdapter.java:536)
     at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsTransportService.handOverAsStream(TmsTransportService.java:253)
     at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsTransportService.requestUpdate(TmsTransportService.java:202)
     at com.sap.tc.di.draft.ts.impl.TransportRequestImpl.transmit(TransportRequestImpl.java:97)
     at com.sap.tc.di.draft.ts.impl.TransmissionPackageImpl.transmit(TransmissionPackageImpl.java:49)
     at com.sapportals.portal.pcd.admintools.export.ExportCTSHandling.attachFileToPackage(ExportCTSHandling.java:209)
     at com.sapportals.portal.pcd.admintools.export.pages.ExportStatusPage.prepareGenericPageSettings(ExportStatusPage.java:417)
     at com.sapportals.portal.pcd.admintools.export.pages.ExportStatusPage.dispatchPageRequest(ExportStatusPage.java:241)
     at com.sapportals.portal.pcd.admintools.export.ExportMain.doContent(ExportMain.java:89)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:166)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:111)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:200)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:115)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:177)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:200)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:115)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:177)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:438)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:404)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:848)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:79)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:848)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:332)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:0)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:335)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:963)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:249)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:0)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:92)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:30)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:35)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:103)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: The current application triggered a termination with a short dump.
     at java.lang.Throwable.<init>(Throwable.java:194)
     at java.lang.Exception.<init>(Exception.java:41)
     at java.lang.RuntimeException.<init>(RuntimeException.java:43)
     at com.sap.mw.jco.JCO$Exception.<init>(JCO.java:1117)
     at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:516)
     at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1224)
     at com.sap.mw.jco.JCO$Client.execute(JCO.java:3909)
     at com.sap.mw.jco.JCO$Client.execute(JCO.java:3417)
     at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter.executeFunction(TmsJCoAdapter.java:112)
     at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter.executeFunction(TmsJCoAdapter.java:133)
     at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter.addFileToRequest(TmsJCoAdapter.java:531)
     ... 38 more
Edited by: Jon Morozowski on Jun 10, 2009 10:57 PM

Here is the short dump in the ABAP system.
Short text of error message:
INTERNAL ERROR UPDATING REQUEST DESC OF RP1K900690
Long text of error message:
Technical information about the message:
Message class....... "PU"
Number.............. 601
Variable 1.......... "INTERNAL ERROR UPDATING REQUEST DESC OF"
Variable 2.......... "RP1K900690"
Variable 3.......... " "
Variable 4.......... " "
I have checked the RFC destination in the J2EE Admin and that works OK. This has me kind of stumped.

One CTS+ for multiple landscapes?

We have about 15 landscapes (ECC, R3, CRM, BI, PI, etc.)
Each landscape has its own single SLD.
We want to configure ONLY one CTS+ on an SM7.0 to handle all of the change
request management for the 15 landscapes.
Is this possible?
Thanks!

Hi,
You can have a single CTS on multiple landscapes.
Checkout the pdf which shows the SAP best practice
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10456aac-44f7-2a10-1fbe-8b7bcd7bcd58
Rakesh

How to Migrate the open transports in CTS+

Hi Experts
We are planning to implement CTS+ in our organisation, after implementing the CTS+ it's possible to migrate the open transports in CTS+
Thanks & Regards
Venkat

Hi venkat,
what i understand is you are already having some TR on which work is gng on and now you want to add.
no problem
in your CTS+ when you create a TR just merge the old TR into this
or
you can also you the Copy objects
in SE09
this is very common technique use by developers so just ask them to check in se09.
how it ans ur query
Regards
Prakhar

CTS+ error while transporting

Hi Folks,
We have configured CTS+ for our systems using PI7.1 system as the CTS+ system.
Please find the below error.
Deployment
Transport request   : SIDK900107
System              : SID
tp path             : tp
Version and release: 372.04.40 701
CTS Deploy Service - Version 0.93 06.03.2007
Deploy web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL =
Double-stack system SID
Deploy for XIR
Deploy File = fed1b8b087ae11deadef001a4bf58938
Error in execution of Web services CTSDEPLOY , exception is cx_ai_system_fault
SOAP:1.007 SRT: Unsupported xstream found: (HTTP Code 401 : Unauthorized)
Return Code = 12
Highest Return Code = 12
Deployment
End date and time : 20090813064458
The RFC is working fine.
Any suggestions ?
Thanks
Pradeep

Hi,
can you look at this configuration
[https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20ccd0ec-2839-2b10-0097-828fcd8ed809&overridelayout=true]
Regards,
Muralidhar

Error while transporting ID objects via CTS

Dear All,
I am facing some issue in Transporting ID objects from Dev to Q.
We have a Central SLD for Dev and Qual. Prod has a different SLD.
I have used Transport targets in SLD to point the Dev to Qual and Qual to Prod.
After this, I created Business Systems in Integration Directory using the Bus Systems from SLD.
When I try to *export these Business Systems in Integration Directory from Dev to Q via CTS * then I get the fol error:
>>>cation Component   NDPL_File_Dummy_P: Obligatorytransport target for business system NDPL_File_Dum
>>>my_P not found in System Landscape Directory
>>>on: Import failed because of business system transfer of object Communication Component   NDPL_File
>>>_Dummy_P: Obligatory transport target for businesssystem NDPL_File_Dummy_P not found in System Land
>>>scape Directory
>>>stprocessTransport(TransportPostprocessor.java:67)
>>>rocessing.InternalImportPostprocessorDir.postprocess30And70Import(InternalImportPostprocessorDir.jav
>>>a:93)
>>>rocess(AInternalPostprocessorDir.java:146)
>>>g.gen.DirPostprocessor.doPostprocessing(DirPostprocessor.java:95)
>>>apt.XIDirPropagationProvider.transportFinished(XIDirPropagationProvider.java:96)
>>>server.transport.impl.pvc.GenPvcTransport.genPvcImport(GenPvcTransport.java:75)
>>>r.server.transport.impl.pvc.DirPvcTransport.pvcImport(DirPvcTransport.java:74)
>>>rver.transport.impl.service.TransportServiceImpl.pvcImport(TransportServiceImpl.java:876)
>>>p.aii.ib.server.transport.impl.service.TransportServiceImpl.importZippedStream(TransportServiceImpl.
>>>java:991)
>>>portServiceImpl.java:773)
>>>D_WRITE_VERSIONSET(CmsHmiMethods.java:534)
>>>s.process(CmsHmiMethods.java:131)
>>>isServiceImpl.java:167)
>>>at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:98)
>>>edMethodAccessor490_10000.invoke(Unknown Source)
Please help...
regards,
Piyush

>
Piyush Mathur SAP wrote:
> >>>cation Component   NDPL_File_Dummy_P: Obligatorytransport target for business system NDPL_File_Dum
> >>>my_P not found in System Landscape Directory
h
has the transport path been set? you should have the target BS in the QA SLD present

CTS+ : Error while importing transport into Portal QA system

Hi All,
we have configured CTS+ for Portal systesms, then we have created a
test transport in Portal Development system (PD5). SOlution manager is the communication systesm. We are also able to release this transport from transport organizer web UI.
This tranpsort is available in transport queue of Portal Qua system , but on importing this transport in PQ7 we are getting following
error
Problem during file access, stopping. Error is:'The file (/usr/sap/trans_SM/data/PD5K900003/Test_CTS_20110215_031956.epa) does
not exist on the filesystem.'.
We have checked in /usr/sap/trans_SM/data/PD5K900003/ file
Test_CTS_20110215_031956.epa exist.
CTSDEPLOY and sap.com/com.sap.tc.di.CTSserver connection are working fine.
Kindly suggest.
Regards,
Akhilesh

Error is
puhi078:sp5adm 54> more PD5T900003.PQ7
59y0C1 ETP199X######################################
1 ETP189 DEPLOYMENT
1 ETP101 transport order     : "PD5K900003"
1 ETP102 system              : "PQ7"
1 ETP108 tp path             : "tp"
1 ETP109 version and release : "372.04.71" "701"
1 ETP198
2 EPU601X"CTS Import Service - Version 0.94" "04.04.2008" " " " "
2 ETW000 ========================================================================
2 EPU601 "Deploy web service destination =" "CTSDEPLOY" " " " "
2 EPU601 "Directory =" "/usr/sap/trans_SM/data" " " " "
2 EPU601 "SDM Deploy URL =" "http://cqhepad1.contact-energy.co.nz:50018" " " " "
2 EPU601 "SLD Deploy URL =" " " " " " "
2 EPU601 "XI Deploy URL =" " " " " " "
4 EPU607 Non-ABAP system "PQ7" (communication system "SP5")
1 ETW000 Start import with id:4D5ADEC1C8D6540AE10000000ACE01D3
4 ETW000 DeployProxy (patch level:0) called with following parameters:
4 ETW000 Deployable(0)
4 ETW000 Deployable-Type:0
4 ETW000 Deployable-Id:4D5A0D6A05111633E10000000ACE01D3
4 ETW000 Deployable-TransportContainerId:PD5K900003
4 ETW000 Deployable-ContentLocator:/usr/sap/trans_SM/data/PD5K900003/Test_CTS_20110215_031956.epa
1EETW000 Problem during file access, stopping. Error is:'The file (/usr/sap/trans_SM/data/PD5K900003/Test_CTS_20110215_031956.epa) does not
1EETW000 exist on the filesystem.'.
3 ETW000 End import with returncode:'12'
4AEPU601 "Highest Return Code =" "12" " " " "
1 ETP189 DEPLOYMENT

Tp return code 12 while trying to release a request in enhanced CTS

Hello All,
I have installed PI 7.1 on windows with Oracle DB. I have followed all the pre requisites to configure enhanced CTS feature and configured Enhanced CTS making DEV as source system and QAS and PRD as Target Systems. For the firast time when i tested i was able to export --> Release and then import but from the second time when i m trying to release a request it has been showing the error tp return code 12.
I didnt get a hint for this in SAP Notes orin any other place. Could you please help me in solving this.
Thanks,
Subbu

Hi mister subbarayudu panguluri
you can check your configuration of your CTS+ with these documentations:
[http://help.sap.com/saphelp_nwpi71/helpdata/en/9a/775de286874bc78dcb1470bc80f0f9/frameset.htm|help.sap.com, configuration of CTS+]
Best practice
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10456aac-44f7-2a10-1fbe-8b7bcd7bcd58&overridelayout=true]
Notes
1003674 - Enhancement for non-ABAP systems in CTS
1146170 - CTS+: Changes from NW 7.0 SP13 -> NW 7.0 SP14
1145268 - CTS+: Changes from NW 7.0 SP12 -> NW 7.0 SP13
1155884 - CTS+, configuration 'close coupling': Troubleshooting guide
Dont forget to configure target business system in SLD.
Regards,
Nor
Edited by: Nor Goudjil on Nov 9, 2009 5:02 PM

IPhone 4S no longer integrates through USB with my 2008 Cadi CTS after iOS 7

Before my installation of iOS7, my iPhone 4S with iOS6 connected perfectly to my 2008 Cadillac CTS. After the "upgrade", now my car cannot recognize my USB device (my phone) and I can't play my music, Pandora, etc., not to mention I can't even use my steering wheel controls for my ipod. So, what am I do do in order to get this functionality back? How can this be fixed?
-Rod

Hello algee1,
Thank you for the details of the issue you are experiencing with pairing your iPhone with your Acura.
In my experience, when updates are released for iOS devices, compatible devices release an update to maintain compatibility. Step 2 from the article below recommends checking with the manufacturer of your car stereo to see if there is a firmware update available for your car stereo:
2. Update software and firmware if necessary
Verify that both your car stereo and your device have the latest software versions. Contact the manufacturer to see if any updates are available. If your device does not have the latest version of the iOS, update to the latest software version.
I recommend reviewing the full article here for additional troubleshooting steps:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
I also recommend these steps if the issue persists after following all the steps in the previous article:
Unable to find nearby Bluetooth accessories
If a pairing record already exists, the device does not appear as discoverable. Try to connect the device using that pairing record.
If you are unable to connect using the existing pairing record, delete the record and pair again.
Ensure that the firmware or software on the Bluetooth accessory is up to date.
Ensure that the Bluetooth accessory is charged or connected to power.
Verify that the Bluetooth accessory is using a profile that works with the iOS device.
Turn off both the iOS device and the Bluetooth accessory, then turn both devices on again.
If the issue persists, test Bluetooth with another device or consult the manufacturer's documentation.
You can find the full article here:
iOS: Third-party Bluetooth headsets, headphones, and keyboards
http://support.apple.com/kb/ht1664
Thank you for using Apple Support Communities.
Best,
Sheila M.

I have a 2010 Cadillac CTS that no longer works w/my iPhone 4 after iOS7 Upgrade.

I have a 2010 Cadillac CTS that no longer works w/my iPhone 4 after iOS7 Upgrade. Any suggestions? It worked well before the upgrade.

I'm sorry...my question was imprecise. When I said 'no longer works' I was referring to plugging the device into the USB and power jacks in the center console and then being able to play music through the radio and control the device from either the radio or the steering wheel buttons. The iPhone 4 I use for this purpose has no cellular service and has never been paired with the car. I have an iPhone 5 with cellular service that is paired with the car. I cannot test theiPhone 5 with the car because of the difference of connectors on the phone. :-( The iPhone 4, however, works fine in my wife's Hyundai Santa Fe.
Thanks, in advance!

RFC problem (CTS with Solution Manager)

Hi everybody,
I'm configuring a transport landscape with Solman.
For demo purpose I created 3 clients in a Sandbox system (SBX), which should function like a 3-system-landscape. I created a transport domain in Solman (SM1) and added SBX into the domain (SM1 and SBX are not in one transport directory). The transport routes are configured from SBX:810 - SBX:820 - SBX:830. After I distributed the configuration, I can also see routes in SBX.
I also used SOLMAN_SETUP to generate the RFC connections to every client (READ and TMW), also to SBX:000 and SM1:000.
Then I created a Solman Project and wanted to configure the IMG-Project in "System Landscape" tab (so that I can use this project for CTS). But as I tried to create the IMG, I got an error:
S:No RFC authorization:000 function module SPROJECT_CREATE_NO_DIA_R.
Message no. No RFC authorization000
Can somebody give me a hint?
Another problem is, I created a customizing request and a workbench request in SBX:810, I can see them in SE09 in SBX, but in SM1 I cannot see them! I also don't understand here...
I'd preciate any help from you!

Hello Charlie
Seeing all the STMS queus in Solution Manager is no problem. The way we have set it up is that the Solution Manager is the TMS domain controller and all systems are included into the TMS domain of the Solution Manager.
That makes the STMS queues of the managed SAP systems visible in transaction STMS.
About two years ago SAP showed plans for a new layer for CTS called CCTS (central CTS) which would only be available on Solution Manager and it's purpose would be even more features and central transport request management. However CCTS has vanished from the radar. It's no longer mentioned and at SAP TechED 2011 it was nowhere to be found.
Using CHARM the idea is also that person X creates a request which then a developer Y can use to insert objects into. Why? Segregation of duties is the answer. Creating a request is always done in the managed SAP system, using RFC you will jump to SE01 or another respective transaction to create the request.
QGM and CHARM add another layer (control) on top of CTS, that's how you should visualize it. If you look up presentations on CCTS you will be able to visualy see that.
You can read up on CHARM on https://service.sap.com/solutionmanager
There are also interesting SAPPress books available
The customizing option is to be found in SE09 I believe but I'll check tomorrow and update this reply because I'm on my iPad now without SAP system available.
The obligation is then you must have an IMG_Project in your managed SAP system that has been CTS enabled. Creating such an img project is easy, transaction spro_admin, fill in title, save, go to tab transport request (or something) and enable the project for CTS.
Kind regards
Tom

Problem w/ serial CTS: asserted when it shouldn't be

Hey,
I have an old Klinger CC1.2 motor controller I'm trying to control with labview through a standard RS-232-C serial port. As far as I know there is no driver for it
According to the manual, the CTS signal should be asserted when a) it is first turned on, b) it finishes accepting a command, or c) it finishes executing a command.The CTS will be deasserted during command acceptance and exectution.
I'm trying to use the CTS signal to tell me when a command has finished executing, which (from the description above) is what the manual suggests I should be able to do. To do this, I'm sending commands to the motor controller via the Instrument I/O Assistant. After that I have a while loop that waits 100 ms before checking the CTS State using a Property Node. The program leaves the while loop when the CTS is asserted (when it outputs a 1).
The problem I'm having is that the CTS doesn't always deassert itself when the motor is still moving, i.e. when a command is still being executed. I'm hoping this is just labview operator error and not some problem internal to the CC1.2.
Any suggestions?

I would not hold your breath waiting for a reply the original poster hasn't been on this site for almost a year, and then it was only on a couple of times. Hopefully someone else may have the manual, but they may not look at this thread unless they are having serial comm issues.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

CTS+ in NW 7.2

Similar Messages

Maybe you are looking for