CTS - Objects PI

Hi, first of all thank you very much for the help I can provide. I have installed the CTS+ and I need to make the transport of objects PI to QA and PRO but have several questions. The questions are:
1. The transport of objects of SLD (Products, SWCV) is necessarily done by file system or can be made by CTS?
2. In the SLD DEV I have to create the Business Systems of QA related to the Integration Server QA? If so it means I have to register Integration Server QA in SLD DEV?
3. The SLD QA I have to create the Business Systems of PRO, related to the Integration Server PRO? If so that means I register Integration Server PRO in SLD QA?
4. Transport is from DEV to QA and QA to PRO, never from DEV to PRO, because I've seen some online manuals that say that the SLD DEV register the Business Systems QA and PRO.

>
> 1. The transport of objects of SLD (Products, SWCV) is necessarily done by file system or can be made by CTS?
go with File only first time,its easy after that go with CTS+
> 2. In the SLD DEV I have to create the Business Systems of QA related to the Integration Server QA? If so it means I have to register Integration Server QA in SLD DEV?
yes correct.
> 3. The SLD QA I have to create the Business Systems of PRO, related to the Integration Server PRO? If so that means I register Integration Server PRO in SLD QA?
yes correct
> 4. Transport is from DEV to QA and QA to PRO, never from DEV to PRO, because I've seen some online manuals that say that the SLD DEV register the Business Systems QA and PRO.
if you are mapping dev to qa and qa to prod , then you dont required dev integration server in prod.
regards,
raj

Similar Messages

CTS+ object-import to repository shows red status

Hi all,
we are using CTS+ for our PI systems. We are using NW7.0 SPS15 and used the HOWTO guide for SPS14 to implement CTS+.
Every thing works fine, beside, that if somebody starts a transport the cache notification for the object-import to the repository always shows an error (integration repository) the integration directory shows no problem. If the cache notification is repeated the error disappears.
Does anybody have an idea what could be the problem or how to track the error?
Thanks for your help.
Christian

Hi Hemant,
thank you for your reply.
My problem is, that note 780747 describes the problem, but does not help...
It could not be a
"Temporary connection error" because the error can be reproduced and vanishes when "Repeat cache notification" is used (other user is used).
It could not be a
"Errors during the retrieval of cache data" because there is no problem shown in the "Problems" tab.
It could be a
"Incorrect configuration" but how do I check this? The rwb shows no problems (other user used than in CTS+) and as mentioned before, there are no problems shown in "Problems" tab.
I think the problem is, because the user NWDI_CTSADM is missing some permisions to start a cache refresh, but the user owns SAP_XI_CMS_SERV_USER, SAP_XI_DEVELOPER and SAP_XI_CONFIGURATOR as described in "How Tou2026 Configure Enhanced CTS for SAP NetWeaver Exchange Infrastructure 7.0 SPS14".
So my question is, how do I start a cache notification with a special user?
How can I check whats the problem?
Thank you for you help!
Best regards
Christian

Transport request table

Hi all,
can u please let me know which table holds the transport request descriptions and stuff.
thanks,
Kiran.

Hi kiran,
1. the following tales :
<b>CTS : Header/Request Table     E070</b>
CTS : Client Source/Target     E070C
CTS : Last Number Of Request     E070L
<b>CTS : Object Entries     E071</b>
CTS : Texts     E07T
2. The bold ones are the important tables.
regards,
amit m.

Error while transporting ID objects via CTS

Dear All,
I am facing some issue in Transporting ID objects from Dev to Q.
We have a Central SLD for Dev and Qual. Prod has a different SLD.
I have used Transport targets in SLD to point the Dev to Qual and Qual to Prod.
After this, I created Business Systems in Integration Directory using the Bus Systems from SLD.
When I try to *export these Business Systems in Integration Directory from Dev to Q via CTS * then I get the fol error:
>>>cation Component   NDPL_File_Dummy_P: Obligatorytransport target for business system NDPL_File_Dum
>>>my_P not found in System Landscape Directory
>>>on: Import failed because of business system transfer of object Communication Component   NDPL_File
>>>_Dummy_P: Obligatory transport target for businesssystem NDPL_File_Dummy_P not found in System Land
>>>scape Directory
>>>stprocessTransport(TransportPostprocessor.java:67)
>>>rocessing.InternalImportPostprocessorDir.postprocess30And70Import(InternalImportPostprocessorDir.jav
>>>a:93)
>>>rocess(AInternalPostprocessorDir.java:146)
>>>g.gen.DirPostprocessor.doPostprocessing(DirPostprocessor.java:95)
>>>apt.XIDirPropagationProvider.transportFinished(XIDirPropagationProvider.java:96)
>>>server.transport.impl.pvc.GenPvcTransport.genPvcImport(GenPvcTransport.java:75)
>>>r.server.transport.impl.pvc.DirPvcTransport.pvcImport(DirPvcTransport.java:74)
>>>rver.transport.impl.service.TransportServiceImpl.pvcImport(TransportServiceImpl.java:876)
>>>p.aii.ib.server.transport.impl.service.TransportServiceImpl.importZippedStream(TransportServiceImpl.
>>>java:991)
>>>portServiceImpl.java:773)
>>>D_WRITE_VERSIONSET(CmsHmiMethods.java:534)
>>>s.process(CmsHmiMethods.java:131)
>>>isServiceImpl.java:167)
>>>at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:98)
>>>edMethodAccessor490_10000.invoke(Unknown Source)
Please help...
regards,
Piyush

>
Piyush Mathur SAP wrote:
> >>>cation Component   NDPL_File_Dummy_P: Obligatorytransport target for business system NDPL_File_Dum
> >>>my_P not found in System Landscape Directory
h
has the transport path been set? you should have the target BS in the QA SLD present

PI 7.1 CTS+ - Manually deleted object in PRD system

Hello,
We have PI 7.1 with CTS+ configured. However, there was a condition that an object was deleted manually in PRD system not via CTS+. After this all the transports that were connected to that object and transported to PRD system were imported successfully but ! the changes weren't set in PRD. That means, the CHR transported to PRD but the changes are not applied.
Any idea how t solve this problem ?
Please advice,
Dimitry

Hi Dimitry,
please check if the XI object you're trying to import have a lower version in PRD than in DEV/QAS.
In the opposite way if the XI object has a more recent version in PRD you'll not be able to update the object, since for the sistem the version you're trying to import is an old one.
Hope this help
Best Regards,
Francesco

Enhanced CTS-PI7.1 not auto attaching objects to transports

Hello,
We have been using CTS for some time now with no issues. Recently when creating transports the objects no longer auto attach to the transport. They appear to download- but when looking at the transport there are no objects attach.
I have been through the config guide for 7.1 and everything looks good. However we still can manually attach the objects to the transport.
Any thoughts?

Hi Sabarish,
Our basis team fixed this (by referring the thread Problems installing Enhanced CTS (CTS+) on PI 7.1 System).
Thanking you.

How to give the CTS of a SE78 object?

How to give the CTS of a SE78 object? When we import a BMP file from PC via SE78 then how can I give it the CTS number?
Regards,
Subhasish

You have an option in SE78 menu, Graphic -- > transport( shift+F6).

OBJECT NAME within CTS REquest

Hello All,
Could you please let me know the transparent table name where OBJECT_NAME associated with CTS stored.
For example: I have atransport where
Program ID = R3TR
Object ID = TABU
OBJECT_NAME = A529
So in which table all OBJECT_NAME are stored?
Thanks,
PJ

E07K.
~Suresh

Cannot move ID objects to Quality Server using CTS

Dear Friends,
We are using PI 7.1. We have created necessary HTTP & TCP/IP Destinations in PI QA server and then transported using CTS all SLD & ESR objects.
Now we are struck up during moving ID objects from DEV PI to QA PI.
Please give me your solutions to resolve this issue.
Thanks
John

Are you getting any specific error at any point? First make sure that SLD transport is properly done, with objects of both Dev and QA system and transport targets properly defined.
Regards,
Prateek

CTS+ Configuration for Transporting non-ABAP objects in Portal Landscape using solution manage 7.1 sp8

Hi,
Currently we have cts+ already configured for our portal systems in our landscape through solution manager 7.0.
Recently we had setup a new solution manager 7.1 and need to perform cts+ configuration using this new solution manager 7.1 as we are planning to remove our old solution manager 7.0 very soon.
We are using NWDI system for transporting our portal transports.
Please help me with steps on how to configure cts+ using solution manager 7.1 using NWDI.

Hi Naveen,
Please find given below BBPCRM & SAP_BW version..
BBPCRM 500 0013 SAPKU50013 BBPCRM BBP/CRM Supp. Pack.
SAP_BW 701 0003 SAPKW70103 SAP Business Warehouse Component Supp. Pkg.
This problem is not only with Bussiness process tab (T-Code: Solution_manage) also System monitoring Still i searching solution for this But once we are restarting System that time this problem is not occuring but after some time system is giving this DUMP
Regards,
Suresh

How to copy modulepool object to other system without CTS

Dear Friends
I have developed one Module pool program for one project and I need to use it for other project. I cant use CTS functionality to copy it. I am able to copy code but I am unable to copy menu and screens.
Enjoy SAP
K.R.Reddy

Hi,
You can copy MENU,PF-status functionality from SE41 transaction. Give program name and press CTRL+F5.
Give the source program name and Destination program name.
Regards,
Sailaja.
Dont forget to reward points, if answer helps you.
Message was edited by: Sailaja N.L.

Function to add Objects to transport piece list (CTS)

Dear all,
with function "TR_EXT_INSERT_IN_REQUEST" I can add objects to a transport request. Now I need to "fill" a piece list. The function module is not working for piece lists (documented).
Does anybody please know a function to add objects to a piece list?
Thanks and best regards for help.
Roman

Funny, German and English documentation is different:
German:
Kurztext
Anhängen und Sperren von Objekten und Schlüsseln an eine Aufgabe
Dieser Funktionsbaustein ist veraltet. Bitte verwendet Sie stattdessen
TR_REQUEST_CHOICE für einen Transportanschluss oder
TR_OBJECT_CHECK und TR_OBJECT_INSERT für die Änderungsaufzeichnung.
Weitere Doku finden Sie bei diesen Bausteinen.
This means: Do not use anymore instead use TR_OBJECT_CHECK and TR_OBJECT_INSERT .
Best regards
Roman

CTS+ Transports in SAP PI 7.1

Hi experts,
we have a new installed SAP PI 7.1. Our scenario is that we have a single SLD for each PI System on dev, test and prod.
Now we are facings some troubles regarding the SLD setup. Our target is to use CTS+ to transport IR and ID objects. In the how to guides I found in SDN I found always settings within the visual admin to get this scenario run. But as I understood there is no more visual admin in SAP PI 7.1.
What are the required steps to connect my sld from dev --> test --> prod and what is additional to perform to get my ID objects transported from dev --> test --> prod.
Regards,
Björn

Hi Bjorn,
CTS+ is a transport mechanism used to transport NWDS, IR, ID objects.....basically JAVA objects......
For CTS+ and NWDI...check it :
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d96022-9df5-2910-90b8-8e0580e0987e?overridelayout=true
Regards,

How to Migrate the open transports in CTS+

Hi Experts
We are planning to implement CTS+ in our organisation, after implementing the CTS+ it's possible to migrate the open transports in CTS+
Thanks & Regards
Venkat

Hi venkat,
what i understand is you are already having some TR on which work is gng on and now you want to add.
no problem
in your CTS+ when you create a TR just merge the old TR into this
or
you can also you the Copy objects
in SE09
this is very common technique use by developers so just ask them to check in se09.
how it ans ur query
Regards
Prakhar

RFC problem (CTS with Solution Manager)

Hi everybody,
I'm configuring a transport landscape with Solman.
For demo purpose I created 3 clients in a Sandbox system (SBX), which should function like a 3-system-landscape. I created a transport domain in Solman (SM1) and added SBX into the domain (SM1 and SBX are not in one transport directory). The transport routes are configured from SBX:810 - SBX:820 - SBX:830. After I distributed the configuration, I can also see routes in SBX.
I also used SOLMAN_SETUP to generate the RFC connections to every client (READ and TMW), also to SBX:000 and SM1:000.
Then I created a Solman Project and wanted to configure the IMG-Project in "System Landscape" tab (so that I can use this project for CTS). But as I tried to create the IMG, I got an error:
S:No RFC authorization:000 function module SPROJECT_CREATE_NO_DIA_R.
Message no. No RFC authorization000
Can somebody give me a hint?
Another problem is, I created a customizing request and a workbench request in SBX:810, I can see them in SE09 in SBX, but in SM1 I cannot see them! I also don't understand here...
I'd preciate any help from you!

Hello Charlie
Seeing all the STMS queus in Solution Manager is no problem. The way we have set it up is that the Solution Manager is the TMS domain controller and all systems are included into the TMS domain of the Solution Manager.
That makes the STMS queues of the managed SAP systems visible in transaction STMS.
About two years ago SAP showed plans for a new layer for CTS called CCTS (central CTS) which would only be available on Solution Manager and it's purpose would be even more features and central transport request management. However CCTS has vanished from the radar. It's no longer mentioned and at SAP TechED 2011 it was nowhere to be found.
Using CHARM the idea is also that person X creates a request which then a developer Y can use to insert objects into. Why? Segregation of duties is the answer. Creating a request is always done in the managed SAP system, using RFC you will jump to SE01 or another respective transaction to create the request.
QGM and CHARM add another layer (control) on top of CTS, that's how you should visualize it. If you look up presentations on CCTS you will be able to visualy see that.
You can read up on CHARM on https://service.sap.com/solutionmanager
There are also interesting SAPPress books available
The customizing option is to be found in SE09 I believe but I'll check tomorrow and update this reply because I'm on my iPad now without SAP system available.
The obligation is then you must have an IMG_Project in your managed SAP system that has been CTS enabled. Creating such an img project is easy, transaction spro_admin, fill in title, save, go to tab transport request (or something) and enable the project for CTS.
Kind regards
Tom

CTS - Objects PI

Similar Messages

Maybe you are looking for