CTS project for users

Hello,
In ECC6.0, can i link CTS projects to users? I mean, could i force the user to use a specific project when he creates a change request?
Thanks for your support!

If I am correct then - you can create and assign users to a CTS project.
To do this you can use SPRO or SPRO_ADMIN.
Thank you

Similar Messages

CTS Project in System Landscape

Hi,
for chaRM,i want to clarrify about CTS project creation.
1. Whether CTS & IMG Project Should Exist in all satellite system ?
2. How to create a IMG & CTS Project.? In tx Solar_project_admin we can able to create the IMG project for all roles (DEV,QT,PRD)in the Satellite system .
or else should we create the IMG project in only developement and rest of the satellite system can be transport the request ???

In Solar_Project_Admin you can create an IMG Project on the development system for the Maintenance Project. You can assign an existing project, but the Create button under the IMG Projects tab will create on for you.
I believe the CTS project will be automatically created when you activate the Maintenance Cycle for the Maintenance Project.
You can use the /TMWFLOW/PROJ transaction under the Project Structure tab to see the IMG and CTS Projects for you Maintenance Project.

I keep getting this message from Imovie: Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)

I keep getting this message from Imovie:
Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)

Bartirn,
I called Apple under my Mac support contract. They were completely unfamiliar with the error you and I were encountering. Updating to 10.8.5 didn't help.
I'm stopping my TimeCapsule while I perform these tasks, but I don't know yet if I have a consistent work-around.
B

Unable to prepare project for publishing. Error in user parameter list

After editing the project in iMovie '09 I am getting strange problems.
1) If I try to share the project to iDVD I get the Error Message: "Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". The same error message I get when trying to "Export Movie".
2) If I play the movie (either in the preview window or in full screen), I hear the audio, but the video remains on the picture, I was, when I start playing. This wasn't the case until yesterday. I don't know, what has changed this.
I am not sure, if both problems are connected.
If I try to play a clip, everything still works well, means audio and video are playing as expected.
Any ideas, what I could try to solve this (I already tried to restart iMovie, checked that I have the newest version 8.0.1 (740) and tried to restart my iMac?
Leela

I'm having the same problem, though it wasn't triggered by me importing anything. I had an almost complete project that I was just editing down and tightening up. I was making some deletions and moving some clips around when the project just went all wonky. If I hit the space bar the video will play. Audio, video and titles are all as they should be. But the editing window is frozen. The raw clips have disappeared from the upper left. When I restart the app the editing window is sometimes blank. But if I drag another application across the screen (like Mail or iTunes) the clips regenerate in the viewer window. This is a HUGE disappointment for me. After wasting an hour trying to solve this I now have to start completely from scratch with this project.

This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal.

This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list) How do I fix this???

Unable to prepare project for publishing
The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I fix this???
I have downloaded my family movies captured on Hi8 video through a Dazzle hollywood DV-bridge to the iMac. Everything went well until I tried to finalize the project.

I'm having the same problem.
When I export (and I want HD quality) I get the error message that
Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I free up more space on my startup disk? My hard drive has 158.61 GB free. Do I need to free up more space?

MacBook Pro with SSD that has a limited disk space (120GB). Rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.

I'm using MacBook Pro with 128GB SSD that has a limited disk space. As we know, when rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.
My question is, Is there any method to get the rendering Projects file saved into an external hard drive which is connected with USB/ Thunderbolt/ Firewire, with huge disk space (eg. 500GB HDD).
Now, new project created in my Mac is automatically saved in (User/Movies/Final Cut Projects) and my Mac has ran out of space to hold the files.
Thank you.

You have at least 3 different ways to show the project library:
1) Go to WIndow->Show Project Library
2) Click the button in bottom left of your window:
3) Hit the keyboard shortcut (Command-0)
The project library will be shown, occupying the area where the timeline usually is.
Your hard disks will be visible. Click the hard disk where you want the new project to reside and hit Cmd-N to create a new project.

How to make field key for user fields cant be changed after project release

Dear Expert,
How can we make field key for user fields cannot be changed once we release the project/wbs?
Cheers,
Nies

Do you mean 'field key' in the project profile in SPRo?
I think after a project is created a change in the field key wont affect the fields in CJ20N..
Can you verify?
Regards
Ramesh

No CTS projects found for "project TEST"

Hi Experts, I´m configuring the Change Request Managment for Solman 7.0 SP16, but when I execute the check report (/tmwflow/charmchk) appear the following issues:
Check consistency of "project TEST"
    --> No CTS projects found for "project TEST"
When I execute de logistic report (/tmwflow/proj) I view that:
- the "Project Structure" status is green and I can view that the Cycle is active and CTS Project is assigned.
- The "CTS Status Switches" status is green and I can view the status of my project TEST.
When I create the IMG Project, the logistic report was in red, but applied the notes:
      1158885 Maintenance cycle/project cycle cannot be completed
      1163568 No completion of task list; CTS project active
And the status was changed to green, but the charm check said No CTS projects found for "project TEST"
Any idea to solve that?
Regards,
Sergio.

Hi,
933705 - Closing inconsistent project cycles
This note will help you to delete inconsistent cycle.
Hope it helps you to solve your problem
Note this note is release independent
Regards
Prakhar
Edited by: Prakhar Saxena on Mar 2, 2009 12:08 PM

Table for user status field in CJ20n transaction project defination

HI ALL,
what is table for user status field in CJ20n transaction project defination creation. This field is in Basic Data tab.
Thanks.

Hi,
Check following tables for Usre status:
TJ30 - User status
TJ30T - Texts for user status
TJ20 - Status profile
JEST - Object status
JSTO- WBS status profile.
Check this code:
REPORT zps_get_userstatus .
PARAMETERS: p_posid LIKE prps-posid.
*-- Constants
CONSTANTS: gc_yes(1)     TYPE c                 VALUE 'X',
           gc_no(1)      TYPE c                 VALUE ' '.
*-- Variables
DATA: l_objnr LIKE prps-objnr.
*-- Internal tables
DATA: BEGIN OF lit_jest OCCURS 0,
       objnr LIKE jest-objnr,
       stat LIKE jest-stat,
     END OF lit_jest.
DATA: BEGIN OF lit_jsto OCCURS 0,
       objnr LIKE jsto-objnr,
       stsma LIKE jsto-stsma,
      END OF lit_jsto.
DATA: BEGIN OF lit_status OCCURS 0,       "Combination of JEST & JSTO
          objnr LIKE jest-objnr,
          stsma LIKE jsto-stsma,
          stat LIKE jest-stat,
        END OF lit_status.
DATA: BEGIN OF lit_usrsta OCCURS 0,       "Uer status for all wbs
         objnr LIKE jest-objnr,
         stsma LIKE jsto-stsma,
         stat LIKE tj30t-estat,
         txt04 LIKE tj30t-txt04,
       END OF lit_usrsta.
DATA: BEGIN OF lit_usrtxt OCCURS 0,       "User Status text - TJ30T
        stsma LIKE tj30t-stsma,
        stat LIKE tj30t-estat,
        txt04 LIKE tj30t-txt04,
      END OF lit_usrtxt.
* get WBS object number
SELECT SINGLE
     objnr FROM prps
           INTO l_objnr
           WHERE posid = p_posid.
* get WBS active status from table JEST
SELECT
      objnr
      stat
           FROM jest INTO TABLE lit_jest
           WHERE objnr = l_objnr AND
                 inact <> gc_yes.
* get WBS status profile from table JSTO
SELECT
      objnr
      stsma FROM jsto
            INTO TABLE lit_jsto
            WHERE objnr = l_objnr.
* combine JEST and JSTO table for user status
LOOP AT lit_jest.
IF lit_jest-stat CP 'E++++'.
    READ TABLE lit_jsto WITH KEY
                        objnr = l_objnr.
    IF sy-subrc = 0.
      lit_status-objnr = lit_jest-objnr.
      lit_status-stsma = lit_jsto-stsma.
      lit_status-stat = lit_jest-stat.
      APPEND lit_status.
    ENDIF.
ENDIF.
CLEAR: lit_jsto, lit_status.
ENDLOOP.
* get text for user status
SELECT DISTINCT
         stsma
         estat
         txt04 FROM tj30t
               INTO TABLE lit_usrtxt
               FOR ALL ENTRIES IN lit_status
               WHERE stsma = lit_status-stsma AND
                     estat = lit_status-stat AND
                     spras = sy-langu.
Let me know if you have any question.
Regards,
RS

User Exit for TCode CJ20N to populate Project system user fields

Hi team,
need one support from your side..
I am looking for User Exit for TCode CJ20N to populate Project system user fields on SAVE.
I have found
Enhancement CNEX0001
Short text PS: User field
which is exactly suiting my req...as it has USER Fields (USR08/USR09 )in export paramters..
BUT it is not triggering on SAVE,,
Any hint or is any other user exit/badi which have USER Fields in export paramters.
Warm Regards
Krishan

Hi Krishnan,
If you want a custom tab that contains User defined fields at Project level then you have to use CNEX0006 user exit. Before this you must declare your fields using the CI include CI_PROJ in the PROJ table.
If you want a custom tab that contains User defined fields at WBS level then you have to use CNEX0007 user exit. Before this you must declare your fields using the CI include CI_PRPS in the PROJ table.
In the PBO function module exit of these exits you must use the following statements as the first statement.
MOVE-CORRESPONDING sap_proj_imp TO proj.
MOVE-CORRESPONDING sap_prps_imp TO prps.
In the PAI function module exit of these exits you must use the following statement as the last statement.
MOVE-CORRESPONDING proj TO cnci_proj_exp.
MOVE-CORRESPONDING prps TO cnci_prps_exp.
The remaining programming as in the case any Screen Exit.
Regards,
Abijith

Reversi Sample - "The project requires user input. Reload the project for more information."

A week ago, I downloaded the sample code examples. Then I extracted the reverse sample code, loaded it and ran it. All was well.
I was just using it as a resource for example code, so no code changes. Now, when I open the project, I get nothing loaded.
Solution explorer displays Solution 'Reversi' (0 Projects). Below that
"The project requires user input. Reload the project for more information."
This message shows for all three sections Reversi, ReversiGameComponet, and ReversiComponentTests.
Ok, so I figure I must have accidently changed something. So, I re-extract. Same message.
The only thing I can think of is that in the options, I changed the startup location for my projects. I like to keep my code projects on the d: drive, so I changed that to D:\!!!W8. I've always done this so that when I create a new project,
it does it in my project directory by default. Didn't change anything else such as the templates dir.
I did set this back to the c:....projects, as where templates are, but that didn't help. So, I reset to my projects directory.
My project that I created loads ok.
Suggestions?

A week ago, I downloaded the sample code examples. Then I extracted the reverse sample code, loaded it and ran it. All was well.
I was just using it as a resource for example code, so no code changes. Now, when I open the project, I get nothing loaded.
Solution explorer displays Solution 'Reversi' (0 Projects). Below that
"The project requires user input. Reload the project for more information."
This message shows for all three sections Reversi, ReversiGameComponet, and ReversiComponentTests.
Ok, so I figure I must have accidently changed something. So, I re-extract. Same message.
The only thing I can think of is that in the options, I changed the startup location for my projects. I like to keep my code projects on the d: drive, so I changed that to D:\!!!W8. I've always done this so that when I create a new project,
it does it in my project directory by default. Didn't change anything else such as the templates dir.
I did set this back to the c:....projects, as where templates are, but that didn't help. So, I reset to my projects directory.
My project that I created loads ok.
Suggestions?
Hi there,
Can you provide the link for the sample code example so I can download and try on my machine?
Regards,

In ECC 6.0, can I link a CTS project id to a transport target group?

In ECC 6.0, can I link a CTS project id to a specific transport target group?
I configured two IMG projects, namely, Phase1 and Phase2. In SPRO, I tied them to CTS project ids, DEV_P00001 and DEV_P00002, respectively. In STMS, I configured two transport target groups called /PHASE1/ and /PHASE2/ that I want to link with the corresponding project ids. The intention is that Phase1 transports will go to the clients specified in the /PHASE1/ target group and that Phase2 transports will go to the clients specified in the /PHASE2/ target group
I want to link the CTS project ids to the respective transport target groups so that (e.g.) if a team member creates a transport in SE01/SE09/SE10 and chooses the DEV_P00001 project id from the Project dropdown, then /PHASE1/ will appear as the default transport target. Likewise, if the team member instead chooses the CTS project id DEV_P00002, then /PHASE2/ will appear as the default transport target.
Right now, the user has to remember to choose the correct combination of CTS project id/transport target group.
Solution Manager is NOT involved in this scenario.
Does anyone know of a way to do this in ECC 6.0?

Hi,
Try this it worked for me though,
1. Goto SPRO_ADMIN
2. Select the Project
3. Choose Change
4. Go To Transport Requests TAB
5. Activate CTS Functionality
6. Save it after the Pop Up
7. Go to Se10 and check if the Project Field is getting Populated with the Desired Project or not.
Regards,
Nitin

Pause for user click missing after Seamless Tabbing fix.

I am upgrading a project from Captivate 5.0 to 5.5. Two of the lessons that worked fine in 5.0 have problems in 5.5. Both lessons use the Tab key to move from field to field in a data row and then the Enter key to calculate at the end of the row. This worked fine in 5.0. In 5.5, pressing Tab caused jump to browser address window. I searched blog and found following solution to add:    so.addParam(seamlessTabbing:, :false:);        to the htm file generated when publishing the file. This is not a desirable solution for long term course maintenance, but it did work. Unfortunately a new problem then appeared. The project moved ahead without waiting for user input in the simulation exercises.
For slides with click boxes using Tab shortcut key and no other interactive objects, the movie just skipped ahead without waiting for user click. I would like the project to pause until the user presses the Tab key and then move to the next slide. The properties for the click boxes are:
Action:
On success: Go to the next slide
Attempts: Infinite
Allow mouse click - yes
Shortcut: Tab
Options:
Captions: Failure only
Others: Pause for Success/Failure Captions and Pause project until user clicks
Timing:
Display for: Rest of slide
Appear after 0 seconds   (I have played around with this setting, but it does not seem to make a difference.)
For slides with Text Entry, the failure captions display before the user has a chance to input anything. Sometimes the captions flash several times at random. I would like the failure captions to only display when the user enters an answer that does not match the stored answers. The properties for the text entry boxes are:
General:
Default text: blank
Retain Text - checked
Validate User Input - checked
Var Associated: Text Entry Box ## (## changes from slide to slide)
On Focus Lost: No action
Action:
On Success: Go to the next slide
Attempts: Infinite
Shortcut: Tab
Options:
Captions: Failure only
Others: Pause for Success/Failure Captions
Timing:
Display For: Rest of slide
Appear after: 0.5 sec.
Pause After: 1 sec
Transition: No Transition
To test whether it was something I was doing in the editing, I went back to the original 5.0 version of the lesson and imported into 5.5 again and published without doing any editing. The lessons that worked fine in 5.0 did not work in 5.5. Then I tried replacing all the click boxes with new ones created in 5.5. That did not work. I tried adjusting the timing. That did not work. For the text entry boxes, I tried using Show Button, creating transparent button with Tab shortcut. That did not work. Several of these suggestions were ones that I found elsewhere in the Blog with similar but not identical problems. I never found a problem that combined the seamlessTabbing with the missed pauses.
I am puzzled and frustrated that these lessons that worked fine in 5.0 don't work in 5.5. Our primary edit is only to update the screen images and add a few new fields. I would often reposition an object on the slide, but not change its properties. Since most of the lessons are working fine in 5.5 and only these two that heavily use the Tab key are not working in 5.5. I don't really have the option of going back to 5.0. I need to put them in an aggregator and they all need to be the same version.
Is there a patch or a quick fix? Also, can the patch to the htm file be built in or is that what is causing the problem? For future course maintenance, it will be complicated to have to treat these two lessons specially. Also, we usually link to the swf file and not the htm file. Our users often use browsers other than Internet Explorer.
Any suggestions?   Thanks in advance.

It would seem Intego Virus Barrier X6 has an intermittent habit of putting the IP address of Apple TV into the Blocked Addresses list despite having checked the 'Trust Apple TV' box and inputting the address into the Trusted Addresses list. Over the course of less than a year this has occurred approximately 4 times to me. My last variation on getting to the root of the problem was to lock the settings with the padlock. I will monitor the situation and should it happen one more time will notify Intego of this 'bug'.

Report generation for users having specific license type

Hi friends,
For my project purpose i have to generate report which has userId,License type of the user,corresponding composite role and single roles assigned to the user and transaction code.
I can get the report for user and license type from USR06 and roles,transaction from SUIM.
But I need a combined report of this. Is there any transaction code which helps me in doing this.Please let me know.
Thanks in advance,
With kind regards
Karthick

> For my project purpose i have to generate report which has
userId,
License type of the user, TCode: USMM
corresponding composite role and single roles assigned to the user and transaction code.
1. Table: AGR_USERS, AGR_TCODES / USR08
2. SUIM -> a) Users by Complex selection criteria -> Execute -> Click on Roles => Full list of Roles per user.
-> b) Transaction -> Executable for users (all selection option)
>
> I can get the report for user and license type from USR06 and roles,transaction from SUIM.
>
> But I need a combined report of this. Is there any transaction code which helps me in doing this.Please let me know.
1. As mentioned by Saby: use TCode SQV1 to map all the tables with a meaningful "foreign key".
2. Download all Table contents and map them in excel by using functions.
Regards,
Dipanjan

CTS project for users

Similar Messages

Maybe you are looking for