CTS to Polycom Telepresence using Polycom Infrastructure

Hello,
I am trying to determine how to successfully connect a CTS system (TX9000, CTS-1300, T3) to a Polycom Telepresence device using Polycom infrastructure. I have got this interop to work using the Interop key using a TPS and Cisco infrastructure. I am trying to see if there is any working model/documentation using Polycom infrastructure only.
Note: I already have what Polycom says is required. MPMX cards, TIP keys etc. I am just trying to figure out what needs to be in place along side all that on the Cisco side. (Polycom cannot give me a clear answer on this. They just say it should work)
Thank you.

If you do not have a DMA, you should register the OTX and ATX to CUCM as the SIP registrar. You can leave the H.323 side registered to CMA if you want to use it for management purposes. You will need to use SIP when calling CTSs so you can use TIP.
Upgrade your HDX codecs to 3.0.5. Your CUCM and CTS versions should work.
Set up a normal SIP trunk in CUCM and point it to the RMX's signaling IP address (not the management address). Make sure that the trunk classifies the calls as "OnNet". This is not the default so you will have to set it in the trunk config.
You will need to point the RMX to CUCM. Under IP Network Services, under SIP Servers, type in the IP address of the CUCM Publisher under Server IP Address and Server Domain Name. Also use the IP address as your outbound proxy server. Make sure your Transport type is TCP (not TLS). The SIP Server Type is Generic.
In the RMX conference profile, set the Line Rate to 4096. Under Advanced, you should have a "TIP Compatibility" field. If you don't, you're having a license issue. Set the field to "Video and Content".
Your meeting rooms need to correspond to the CUCM route pattern. For example, in CUCM you could point 5555X to the RMX. Your meeting rooms should use IDs in the 55550 to 55559 range.
Thanks, Jeff

Similar Messages

Sending CRM survey templates to Mobile handheld using Mobile infrastructure

Hi,
I have a a requirement to send survey templates to handheld client using mobile infrastructure. Also the survey results have to be send from handheld client to CRM using the mobile infrastructure.
Has anybody send CRM objects using mobile infratructure? Usually CRM middleware is used for sending and receiving data to mobile devices.
But Mobile infrastucture is different from CRM middleware and use download modules to fill syncBO structures and then create XML files to send to handheld cleint. When it gets the XML results from client, it fills the syncBO from the xml and then call upload modules to send data to update backend (CRM or ERP ) objects.
Please let me know if you have done similar development and if you faced any complexities to send CRM data using mobile infratructure.
thanks
Jay

Hi
I´m not technical consultant but I need to know whether is possible to sync data between CRM and Symbol devices just using CRM Middleware or whether is necesary pass on MI platform to achieve that?
it is a little confusing for me to understand if CRM middleware/CDB is also needed for a Mobile scenario where I have MI also, or both are required.
Could you clarify that for me, please?
Thanks for your help

Can we use Grid Infrastructure 11.2 to protect a single instance database?

Hi all,
I would like to use Oracle Grid Infrastructure to protect a single-instance database.
I found these docs:
http://www.oracle.com/technetwork/products/clusterware/overview/em-db-failover-128585.pdf (for 10.2)
http://www.oracle.com/technetwork/products/clusterware/overview/si-db-failover-11g-134623.pdf (for 11.1)
I was unable to find a similar document for GI 11.2 . Do you know if such a document exists?
At the moment I only know that the GI is free if used for an Oracle Product, but I am not shure whether it can be used to protext external applications or single-instance databases
Andrea

Hi,
while this still works (the scripts for failover you find in the demo folder $GI_HOME7/crs/demo/coldfailover), the document does not exists, since with 11gR2 there is a supported solution called RAC ONE Node, hence rendering the manual setup obsolete.
For more information see:
Oracle Clusterware and Application Failover Management (Doc ID 790189.1)
Regards
Sebastian

Encrypt Emails using PKI Infrastructure (X.509 Certificates)

Dear HTMLDB Fans,
i wonder if anybody ever needed to send passwords via email to the enduser and how you are doing this via plsql. As far as i can see there is no easy way to send encrypted Emails with a Plsql Package. I read that Oracle took over the PHAOS Company in order to fullfill Requirements in the Security Area but there must have been some solutions out there before?!
The way to do it seems preety easy.
1. Download the public Key of an User you want to send an email.
2. Encrypt your Message with that Key
3. Send your Message
Any Hints are appreciated.

I tried using demo_mail and DBMS_OBFUSCATION_TOOLKIT but it doesn't seem to be able to deal with x.509 certificates.....
Has anyone succeeded before me?

BCM tool to use VOIP infrastructure

HI,
i am working in CRM 5.0 enviornment , my client wish to use BCM tool for building VOIP technology can you provitide me aestimate for this , or can we suggest better cost effective solution to suit CRM 5.0 Enviornment .
thanks in advance

Hi Pravin,
BCM is a great option for clients already using CRM. Whenever they decide to upgrade their CRM, BCM will provide even more benefit and tight integration.
BCM integrates with CRM 5.0 IC Web Client via ICI protocol and IC Win Client via SAPphone protocol. Which is your customer using?
What kind of estimate are you looking for? Time? Complexity? Price? Feel free to contact me directly to discuss further.
Sincerely,
Glenn
Glenn Abel
Covington Creative
www.covingtoncreative.com

How to configure ex90 for use with polycom resource manager GAB

My customer has a Polycom infrastructure, including using Resource Manager for the GAB server. I also have several Cisco endpoints deployed (EX90 and C40) and I need to get these units configured to use the GAB. Polycom documentation sucks and only says:
1. At the endpoint, enter the information required for directory set up including the Polycom Global Address Book/RealPresence Resource Manager system IP address and the path.
For example, http://<RPRM_IP_ADDRESS>/TMS/Public/external/phonebook/PhoneBookService.asmx.
To do this on Cisco endpoints, go to System Configuration> Phone Book Server.
2. Wait for the connections to take effect
When I go to the EX90 phone book server setup page, I only have ID, Type and URL fields. The type field has a drop down that only has Cisco options available (VCS, TMS, Callway and CUCM)
No matter what combination I use, I haven't been able to get the EX90 to pickup the Polycom directory.
Any suggestions? Thanks

What happens when you try that URL (http://<RPRM_IP_ADDRESS>/TMS/Public/external/phonebook/PhoneBookService.asmx) from a Web Browser - do you see anything, or get an error?
You'll need to make sure that's accessible first before trying to configure your endpoints to use it.

Using Windows Network Policy Server to authenticate Prime Infrastructure 1.4 admin access

I am using Prime Infrastructure 1.4 and I am needing to set up RADIUS Authencation. I am using Microsoft Network Policy Server. I have done all of the setup on both systems. I have matched up the settings the best I can on both systems. I am trying to use CHAP. I keep getting username or passwrod is not valid. In a effort to test I changed the Authentication type to PAP (I do not want to use this because it is not encrypted) But in a effort of testing I changed the setting on both the NPS and on Prime. I am now able to log in. Changing back to CHAP it fails and states the Username or Password is invalid. SO, PLEASE HELP!!!!

Ok, I was able to resolve this over the weekend. The actual fix is a little complicated. You can find the full explination here: http://technologyordie.com/windows-nps-radius-authentication-of-cisco-prime-infrastructure
The basics are that Prime (1.3 is the version I am using at this point) expects two AV pairs from radius. They are as as follows:
NCS:role0=Admin
NCS:virtual-domain0=ROOT-DOMAIN
"Admin" is the name of the group you would like your users to have access at and "ROOT-DOMAIN" is the name of the domain you would like them to have access to.
For TACACS+ I suspect the AV Pairs are going to be the same but I have not been able to test that.

Pushing Configs to devices using Cisco Prime Infrastructure

Hi All,
I am trying to push a simple configuration to WLC using Prime Infrastructure. But it is failing as PI doesnot have RW SNMP access.
My question is that can I use PI to push configs without using SNMP. Like do it using ftp or something.
Also do the Wired Devices also need SNMP RW access on PI's part.
All your help is appreciated.
Mukul

You need SNMP RW.
If you use CLI template you need ssh/telnet credentials though.
Sent from Cisco Technical Support iPad App

CTS+ error while transporting

Hi Folks,
We have configured CTS+ for our systems using PI7.1 system as the CTS+ system.
Please find the below error.
Deployment
Transport request   : SIDK900107
System              : SID
tp path             : tp
Version and release: 372.04.40 701
CTS Deploy Service - Version 0.93 06.03.2007
Deploy web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL =
Double-stack system SID
Deploy for XIR
Deploy File = fed1b8b087ae11deadef001a4bf58938
Error in execution of Web services CTSDEPLOY , exception is cx_ai_system_fault
SOAP:1.007 SRT: Unsupported xstream found: (HTTP Code 401 : Unauthorized)
Return Code = 12
Highest Return Code = 12
Deployment
End date and time : 20090813064458
The RFC is working fine.
Any suggestions ?
Thanks
Pradeep

Hi,
can you look at this configuration
[https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20ccd0ec-2839-2b10-0097-828fcd8ed809&overridelayout=true]
Regards,
Muralidhar

How about allowing customers who don't use all their paid for data to store it to be used in the event of an over use?

If we have already paid for data why can't we store it so if someone on the plan is traveling or in an area without wifi if the plan is in jeopardy of going over it could pull from the storage. I have five (5) lines and 10g and rarely use more than half but occasionally there is the possibility of going over. It seems unfair when for months I have paid for and not used it all. It would be a really good marketing move to offer this to those who might be ready to switch cell phone carrier.

rebretz wrote:
Barely going over your data plan results in such a ridicously high charge. It's $10 for an extra GB. That's really steep. And the difference between the 5GB and 10 GB plan is only $30. Again it only comes done to Verizon greed. (Not just Verizon but AT&T also) If someone is on the More Everything plan, it is $15 for an overage of up to 1 GB if you have an allowance of 1 GB or more, it is not $10. Additionally, there is not a 5 GB plan, but a 4 GB and a 6 GB plan. The difference between a 4 GB and 10 GB plan is $30/month and the difference between a 6 GB and 10 GB plan is $20/month.
This also goes along with Verizon now going to throttle data of people still on grandfathered unlimited plans by claiming it's for network optimization. It's all about trying to squeeze as much money as possible out of people. I have two lines of grandfathered unlimited data but if I would change my plan to so called "More Everything Plan" I'll end paying about $70 more a month. Throttling data does NOT squeeze more money out of customers. You will still be paying the same $30/month for your unlimited data. The throttling will ONLY be for high bandwidth activities, at least as reported by multiple sources, and will only be temporary, unlike until the end of the billing cycle as has been the case in the past. Of course if you would be paying $70 more/month to switch to More Everything you should stick with your old Nationwide plan. Not everyone who switches will be paying more, though, and would need to be determined on a case by case basis by the customer.
It's obvious Verizon is only doing this to squeeze us of Unlimited. If they were really worried about Network Optimization they would throttle anyone who uses more than 5GB of data a months not just those still on Unlimited Data. This is not the case. When someone who pays for ACTUAL usage, the increased revenue can help Verizon offset the cost of increasing capacity. When you have a SET REVENUE stream on an unlimited data plan, this IS NOT the case. Increased revenue leads to more money available to be used on infrastructure.

How to configure OraMTS to allow WCF using MSDTC access OracleDB On unix?

How to configure OraMTS to allow WCF using distributed transactions to access the ORACLE database On Linux/Unix ?
Env:
1. DB-tier node , ORACLE database (version: 11.2.0.1.0) on Redhat Linux server ;
2. middle-tier node ,Both the client, the MS DTC and Oracle MTS run on the same computer , Win7 x64 OS , installed .Netframework 4.0, ODP.net (ODAC112030), and configure the component services in a distributed transaction;
Has done the configuration:
1. ORACLE database on a Linux server (version: 11.2.0.1.0) has execute oramtsadmin.sql script;
2.ORACLE database on a Linux server (version: 11.2.0.1.0) has execute the following script, Creating an Access Control List (ACL);
BEGIN
-- Create the new ACL, naming it "OraMTSadmin.xml", with a description.
-- This provides the OraMTS administrative user e.g. MTSADMIN user FOO
-- the privilege to connect
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('OraMTSadmin.xml',
'Allow usage to the UTL network packages',
'ORAMTS', TRUE, 'connect');
-- Now grant privilege to resolve DNS names to the OraMTS administrative user
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE('OraMTSadmin.xml' ,
'ORAMTS', TRUE,'resolve');
-- Specify which hosts this ACL applies to, in this case we are allowing
-- access to all hosts. if one knew the list of all Windows middle-tier,
-- these could be added one by one.
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('OraMTSadmin.xml','*');
END;
3. ORACLE database on a Linux server has set JOB_QUEUE_PROCESSES = 1000;
4. restart Oralce;
5.Test code as follows :
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using JetSun.Infrastructure;
using Microsoft.VisualStudio.TestTools.UnitTesting;
using JetSun.Infrastructure.ServiceModel;
using JetSun.DataModel.Cis;
using JetSun.TestFramework;
using System.IO;
using System.Data.EntityClient;
using System.Data.Objects;
using ConsoleApplicationTest;
using System.Transactions;
namespace Core.Tests
[TestClass]
public class EfOracleTest
public TestContext TestContext { get; set; }
[TestMethod]
public void GetEntities()
//string cn = "DATA SOURCE=HIS30;DBA PRIVILEGE=SYSDBA;PASSWORD=jetsun;PERSIST SECURITY INFO=True;USER ID=SYS;enlist=true";
string cn = "DATA SOURCE=HIS30;DBA PRIVILEGE=SYSDBA;PASSWORD=mtssys;PERSIST SECURITY INFO=True;USER ID=mtssys;enlist=true";
DbsSetting s = new DbsSetting(Dbs.IP, DbsProvider.Oracle, cn);
Runtime.SetDeploymentDir(TestContext.TestDeploymentDir);
File.Copy("E:\\VSTS\\MedicalHealth\\bin\\Debug\\DataModel.Cis.Oracle.dll", Path.Combine(TestContext.TestDeploymentDir, "DataModel.Cis.Oracle.dll"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.csdl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.csdl"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.ssdl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.ssdl"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.msl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.msl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.csdl", Path.Combine(TestContext.TestDeploymentDir, "Model1.csdl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.ssdl", Path.Combine(TestContext.TestDeploymentDir, "Model1.ssdl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.msl", Path.Combine(TestContext.TestDeploymentDir, "Model1.msl"));
string connectionString = s.ToEdmConnectionString(typeof(EdmEncounter), false);
//// Initialize the EntityConnectionStringBuilder.
//EntityConnectionStringBuilder entityBuilder =
// new EntityConnectionStringBuilder();
////Set the provider name.
//entityBuilder.Provider = s.Provider.Provider;
//// Set the provider-specific connection string.
//entityBuilder.ProviderConnectionString = cn;
//// Set the Metadata location.
//entityBuilder.Metadata = string.Format(@"res://{0}/EdmDiagnose.csdl|res://{0}/EdmDiagnose.ssdl|res://{0}/EdmDiagnose.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//entityBuilder.Metadata = string.Format(@".\Model1.csdl|.\Model1.ssdl|.\Model1.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//connectionString = entityBuilder.ToString();
////using (Entities edm = new Entities(connectionString))
//// foreach (var item in edm.ENCOUNTERs.Take(10))
//// Console.WriteLine("{0}\t{1}", item.ENCOUNTERID, item.DISPLAYNAME);
//entityBuilder.Metadata = string.Format(@"res://*/EdmDiagnose.csdl|.\EdmDiagnose.ssdl|.\EdmDiagnose.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//entityBuilder.Metadata = string.Format(@"res://{0}/", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
connectionString = s.ToEdmConnectionString(typeof(EdmFeeInfo), false);
try
//using (TransactionScope tx = new TransactionScope())
using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Required, new TimeSpan(0, 0, 30)))
//using (var dbcn = s.Provider.CreateConnect(connectionString))
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
//edm.Connection.CheckOpen();
//using (edm.Connection.BeginTransaction())
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
item.Amount = item.Amount * -1;
edm.SaveChanges();
// using (EdmFeeInfo edm2 = new EdmFeeInfo(connectionString))
// edm2.Connection.CheckOpen();
// edm2.Connection.EnlistTransaction(Transaction.Current);
// foreach (var item in edm2.FeeInfos.Take(100))
// item.Amount = item.Amount * -1;
// edm2.SaveChanges();
// throw new NotImplementedException();
TestContext.WriteLine("-----------1---------------");
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
throw new NotImplementedException();
catch (Exception ex)
TestContext.WriteLine((ex.InnerException ?? ex).Message);
TestContext.WriteLine("-------------2-------------");
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
6. the test results are as follows:
4 125
4 835.45
4 3458
4 2350
4 200
4 100
4 300
4 123
4 234
无法列入分布式事务处理（Could not be included in the Distributed Transaction）
-------------2-------------
4 125
4 835.45
4 3458
4 2350
4 200
4 100
4 300
4 123
The main error message:无法列入分布式事务处理（Could not be included in the Distributed Transaction） , not use distributed transaction everything is normal.
My test environment MS DTC and Oracle MTS Recovery Service run on the same computer, but OracleMTSRecoveryService registry values under£º HKEY_LOCAL_MACHINE \ SOFTWARE \ Wow6432Node \ ORACLE \ OracleMTSRecoveryService ,not under HKEY_LOCAL_MACHINE \ SOFTWARE \ ORACLE,I do not know that there is no relationship.
Is not configured incorrectly?Who can help me, thank you very much!

Do you really have a requirement to push data from Oracle to Access rather than pulling data from Oracle to Access? It would be exceptionally unusual to push data from Oracle to Access.
Pushing from Oracle to Access would means that you want some Oracle process running that is updating Access. But you said that your Access database was on your "local desktop" which implies that it is not running on a server where it is always available. So that means that the Oracle process is going to regularly encounter (and report) errors because the Access database is not available. In turn, that's going to mean that your push process is either going to cause the underlying transaction to fail or it's going to mean that the push process is going to have to implement a fair amount of code to queue data to be pushed at a later date (and track all those changes) which is no small task. None of that seems particularly pleasant.
On the other hand, Access is designed to pull data from real relational databases like Oracle. That's the far more normal approach architecturally. It doesn't require an Oracle process, it doesn't generate errors on the Oracle database when the local desktop is down, etc.
And, of course, I'm assuming that introducing Access is even architecturally reasonable. Most organizations would be extremely hesitant to allow data from an Oracle database to get moved into Access because that quickly means that they lose control of the data from a security standpoint, that there are now multiple copies of the data floating around when changes & corrections are made, etc. That causes all sorts of headaches normally above and beyond the headaches that pushing from Oracle to Access would create.
Justin

Transfer the Pur Order Info through BAPI's between SAP R/3 Systems Using XI

How to Create a Purchase Order for the Vendor and transfer this data through BAPI's between SAP R/3 Systems Using "Exchange Infrastructure(XI)".
Please kindly let me know the procedure for creating BAPI's and how to transfer this information between SAP R/3 systems. Please kindly mention the NAVIGATION for this scenario.

Hi Revathi,
If you want to do an IDOC to IDOC scenario, then the Points to be noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. You do not need a sender IDOC adapter, and no sender agreement, but a receiver IDOC adapter and a receiver agreement is needed.
IDOC -> File scenario ref:
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
File -> IDOC ->
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
(It concentrates on XSLT mapping but also gives an idea about the configuration part. Do go thru that, it might help you.)
Apart from this if you need any info on how to configure your ALE, partnet profile,etc drop me a mail, I have excellent tutors that can help you in the same.
Regards,
Bhavesh

OCS 10.1.2 using Oracle Internet Directory R3 (10.1.4)

Hello people...
Somebody knows if it is possible that OCS 10.1.2 can use an existing Oracle Internet Directory 10.1.4?
Documentation specify compatibility with OID 9.x versions and obviously OID 10.1.2 and Certify list of Collaboration Suite for Identity Management specify only version 10.1.2 and no for the new latest version 10.1.4.
I think that both documents were written before the release of Identity Management 10.1.4. Are you test in your environments this configuration? works?
Thanks in advance for your comments...

A para in a metalink note states that ocs 10.1.2.3 portlets can be deployed on a portal 10.1.4 using IAS 10.1.2 infra structure(but i donot think that oid version is 10.1.4 ).
According to Note:389677.1
Check the list of possible scenarios for OCS portlets - Portal coexistence to see, what is possible and what is not possible: ·
     OCS 10.1.2.x is shipped with Portal 10.1.2.0.2 and the OCS 10.1.2 portlets can be used with a 10.1.2.0.2 Portal ·
OCS 10.1.2.x portlets can be deployed to a 10.1.2.0.2 Portal ·
     OCS 10.1.2.0.0 portlets cannot be used with a Portal 10.1.4 ·     OCS 10.1.2.1.0 portlets cannot be used with a Portal 10.1.4 ·
     OCS 10.1.2.2.0 portlets can be used with a Portal 10.1.4 and they can be deployed to a 10.1.4 Portal.This scenario is supportet, but not certified yet.Mandatory prerequisite is the OCS cumulative patch 10.1.2.2 (see Note 352989.1) or better OCS cumulative patch 10.1.2.3 (see Note 361082.1)
Following scenarios were tested by Oracle Support - but these are not certified yet:·
OCS 10.1.2.3 and 10.1.4 Portal using the OCS infrastructureNote 392913.1
How To Register OCS 10.1.2.3 Portlets To External 10.1.4 Portal Using OCS Infrastructure Note 392913.1
How To Register OCS 10.1.2.3 Portlets To External 10.1.4 Portal Using OCS Infrastructure ·
OCS 10.1.2.3 and 10.1.4 Portal using an 10.1.2.0.2 iAS infrastructureNote 393590.1
How To Register OCS 10.1.2.3 Portlets To External 10.1.4 Portal Using IAS Infrastructure Note 393590.1 How To Register OCS 10.1.2.3 Portlets To External 10.1.4 Portal Using IAS Infrastructure ·     OCS 10.1.2.3 (using OCS infrastructure) and Portal 10.1.4 using another iAS 10.1.2.0.2 infrastructureNote 390467.1 How To Register OCS 10.1.2.3 Portlets To External 10.1.4 Portal Note 390467.1 How To Register OCS 10.1.2.3 Portlets To External 10.1.4 Portal

Using Prime Infrastucture 2.1 to get the DOT1X status of ports

Using Prime Infrastructure 2.1 is it possible to generate a report across multiple switches for the ports that are configured to use dot1x and those that are not? The goal of the report is to identify the percentage of ports currently using dot1x vs those that are "open" ports. I'd prefer the ports that "use" dot1x but are authentication open to be included in the group that is not using dot1x, since they really aren't. It would also be nice if trunk ports and those that are administratively down (shutdown) were not counted in either total.
The sample scenario would see 2 switches, find that that 80 of 94 ports have dot1x, and the 10 ports that are trunks or shutdown are not counted.

Not really.
You could sort of do that using Prime LMS's "netshow" functions - it allows you to run a show command (or set of show commands) across your network and provides the output in one set of results.
You could also create a compliance job in Prime LMS and use that to tell you which user ports are "compliant" with your desired state of having the "dot1x pae authenticator" command, for example.
Unfortunately Prime Infrastructure is lagging in its ability to do this sort of thing.

WLC 5508, Prime Infrastructure, 7921 phones and QoS

Hi everybody!
I have deployed about 50 wireless cisco phones int the network with 27 APs with the WLC 5508.
I'm trying to investigate phones behaviour (I have some loss of audio).
And I use Prime Infrastructure for monitoring.
I run the Voice Diagnostic on the selected two phones.
and in the Charts I see the next:
1. for one phone "Downlink AC Queue Usage" shows all the traffic of "voice packets". but "Uplink AC Queue Usage" shows all the traffic of the "Best efforts packets".
2. for the second phone "Downlink AC Queue Usage" shows all the traffic of "Best efforts packets". and "Uplink AC Queue Usage" shows all the traffic of the "Video packets".
that is strange, very strange. the WLAN of these phones uses platinum QoS. none of other WLANs uses "gold" QoS.
does this mean I have a QoS misconfiguration?
where may the failure be? WLC? switches? router?
please, any suggestions...

I noticed few misconfigurations as per your response
1. Are you configured AP as FlexConnect ? If not AP connected switchport should be configured as ACCESS port & trust DSCP. If it is configured as FlexConnect, then you can configure switchport as turnk & in that case you have to trust CoS using "mls qos trusct cos" command.
2. WLC connected trunk ports always to be configured to trust CoS not DSCP. Otherwise WLC set QoS value ignored by your switch.
3. If you WLAN is set for Platinum then you have to configure Platinum QoS profile for 802.1p & set value as 6.
I would suggest you to verify QoS value preserve across you switch network. You have to take some wireshark packet caputres (as shown in my reference link) and make sure your voice packet DSCP goes into rest of your network as EF. You need to do this for upstream & downstream (from 7921 perspective) traffic. Here is the traffic flow if AP connected to switchport 1 & WLC connnected to switchport 2.
7921 <-> AP <-> Switch port 1 <-> Switchport 2 <-> WLC <-> Switchport2 <-> Rest of your network
Once you do this, then you can go to Prime & check those charts to reflect QoS values correctly. Otherwise you do not know where these QoS value get stripped/or modified in your network.
HTH
Rasika
**** Pls rate all useful responses ****

CTS to Polycom Telepresence using Polycom Infrastructure

Similar Messages

Maybe you are looking for