CTS transport in Integration Directory

Hello,
We are running NW70 SP13 and have fully configured CTS+ as per the SAP documentation for SP13 specifically.
In Integration Repository we can see the export option using CTS but in the Integration Directory for scenarios we do not see the "Transport with CTS mode" option...it is defaulted to File Transport and the field is not changeable.
Any ideas?

In the exchange profile make the following entry
com.sap.aii.ib.client.properties: com.sap.aii.ibrep.core.cms.,com.sap.aii.ibdir.core.cms.
for Integration Repository com.sap.aii.ibrep.core.cms.*
for Integration Directory com.sap.aii.ibdir.core.cms.*
Note:
Do not replace existing values; add the new value to the existing values.
Note:
These settings specify that the CMS transport entries are transferred from the server to the web client front end.
Refresh the Exchange profile parameter.
You can refer to link below
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Try now.
Gaurav Jain
Reward points if answer is helpful
Edited by: Gaurav Jain on Jun 17, 2008 10:01 AM

Similar Messages

PI 7.11: Import of CTS+ transport fails (Integration builder only)

Hi,
I've released a transport from DEV to QUAL system.
I've imported via STMS.
But I don't see the transported objects.
The imported change list is already closed and I cannot activate the contained objects.
There's no open change list available for my user.
When I try to transport those objects again, I get an error in STMS:
com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Unable to transfer object Configuration Scenario SetEmployeeSOAP (DirContext) to change list 'XI 7.1 Import' (c6a9ea7b-57db-11e1-a930-000025876142) since object is already in your change list 'XI 7.1 Import' (e1586c72-57c2-11e1-bf9c-000025876142).
How can I activate the objects contained in the mentioned change lists?
Thanks in advance!

Unfortunately, I've crowned too early
The target systems are not filled in correctly.
We have a 3-tier environment (DEV, QUAL, PROD).
I've setup the same SLD settings in SLD in DEV and QUAL system.
SAP_DEV has target SAP_QUAL and SAP_QUAL has target SAP_PROD.
But in the scenario that I've imported into PI QUAL it didn't replace SAP_DEV with SAP_QUAL (e. g. in CC, Receiver determination etc.).
What can be the reason for that?
Are my target settings not correct?

Transporting Integration Directory objects between N and N+1 landscapes

I have a question regarding the transport of Integration Directory objects.
We are implementing N+1 PI 7.3 (java only) Development and QA systems. The N+1 PI systems are a copy of the Production Support (N) PI Development and QA systems. As part of the N+1 build we will also configure the business systems in the SLD for this landscape. Is it possible to transport objects from the "N" landscape into the "N+1" landscape? These changes would only be new objects that would not overwrite anything in N+1. For anything that is also being changed in N+1 we would perform manually. Is there anything special needed when setting up the business system in the SLD for this scenario?
Thanks!

Thanks Barry
That menu option is available to me too but there is no option to use CTS+ in the pull down list.
I can't visit imageshack from work so I can't see your screenshot but I'd bet you have the option to export using "Open CTS+ Organizer" on the first menu too - I don't.
I've obviously got some config missing but, given I can transport ESR and SLD objects, I'm struggling to know what.
Edited by: Murray Nicholas on Sep 3, 2010 12:39 PM

Integration Directory (ID) transport to Prod system

I am trying to move XI ID and IR to prod system thru file system transport. When I transport ID requests and activate it keeps complaining "Unable to move object. Change lists were not part of the same import"
I checked the ID there are no open requests in my id or others all have been closed.
I would also like to know if there is a way to completely transport the Integration Directory (ID) objects either scenario or service objects along with their change lists
Thanks
Subbu

hi,
Change lists were not part of the same import"
Make sure you have activated change lists open under ur id and check if any for other userid
 would also like to know if there is a way to completely transport the Integration Directory (ID) objects either scenario or service objects along with their change lists
Once you have activated the changelists you can either transport the whole scenario(right click on scenario and export) or transport individual objects using the tools-> export option on the tool bar of ID.
Cheers,
naveen

Could not see Transport using CMS in Integration Directory

Hi,
I have Changed the Parameter setting to true in Integration Builder for Integration Directory and Integration Repository. When i login into Integration Directory i cannot see the option Transport using CMS in Export. I can only see Transport using File system.
Please help me out in configuring the CMS correctly.
Thanks,
Fahad

Hi Fahad,
This thread answers ur question
CMS Transport mode unavailable in Integration Directory
cheers,
Prashanth
P.S Please mark helpful answers

Integration Directory - Transport using CMS does not appear

Hi guys,
I'm having problems with one thing I thought it would be trivial.... I'm not able to get the option 'Transport using CMS' in the Integration Directory available.
I've done the necessary steps on the exchangeProfile in order to transport objects using CMS.
1. Configuring ExchangeProfile
IntegrationDirectory
com.sap.aii.ibdir.core.cms.enableTransportWizard=true
com.sap.aii.ibdir.core.cms.enableClTransport=true
IntegrationRepository
com.sap.aii.ibrep.core.cms.enableClTransport=true
com.sap.aii.ibrep.core.cms.enableTransportWizard=true
Added the values to com.sap.aii.ib.client.properties
u2022 com.sap.aii.ibrep.core.cms., com.sap.aii.ibdir.core.cms.
2. And after, I've created the tracks needed for IntegrationRepository and IntegrationDirectory.
For the IntegrationDirectory I've followed SAP's description:
"You have created an XI track in the Landscape Configurator and entered the addresses of the development, consolidation, and productive directory. There are no software component versions in the Integration Directory. Therefore, for directory transports using the CMS, you specify the software component version SAP-INTDIR 3.0 (EXCHANGE DIRECTORY 3.0). This refers to all configuration objects of the Integration Directory.
Once you have made this setting, you can create transport lists for the CMS. The status of the change lists no longer changes to Closed immediately after their release, but first changes to Transportable."
3. I've restarted the J2EE Server.
When I export the objects from IntegrationRepository everything runs OK, but on the IntegrationDirectory I'm not able to have the option 'Transport Using CMS' available.
I've read several threads on the SDN but none of them solved the problem...
Can anyone give me any hint ?

Hi Sameer,
No luck.... There's nothing similiar to what I'm describing and the points which are mentioned i've already covered them.
Thanks for the tip, I was hoping it could give me a push...
Any ideas...?

Transport protocol version error in Integration Directory API

Hi All,
I am trying to create SOAP receiver communication channel using Java-only PI 7.31 directory APIs. I have passed all the required parameters to the CommunicationChannelIn service, but it's throwing error - "Enter at least one object key for operation 'create'".
When I tried to test the service through WS Navigator, it's giving exception - "Enter a value for attribute 'Transport Protocol Version'" which doesn't exists in case of SOAP adapter creation.
Has anybody come across this issue? If the adapter metadata does not specify any transport protocol version, then shouldn’t the validation checks in CommunicationChannelIn service provider proceed without errors on a blank value for this attribute?
Note: I have gone through all the SCN blogs, discussion threads we have on topics related to Integration Directory API.
Thanks in advance for all the help and suggestions.
Regards,
Yashu Vyas

Hi All,
I am trying to create SOAP receiver communication channel using Java-only PI 7.31 directory APIs. I have passed all the required parameters to the CommunicationChannelIn service, but it's throwing error - "Enter at least one object key for operation 'create'".
When I tried to test the service through WS Navigator, it's giving exception - "Enter a value for attribute 'Transport Protocol Version'" which doesn't exists in case of SOAP adapter creation.
Has anybody come across this issue? If the adapter metadata does not specify any transport protocol version, then shouldn’t the validation checks in CommunicationChannelIn service provider proceed without errors on a blank value for this attribute?
Note: I have gone through all the SCN blogs, discussion threads we have on topics related to Integration Directory API.
Thanks in advance for all the help and suggestions.
Regards,
Yashu Vyas

CTS Transport Mechanisam ?

Hi Experts,
I need to Move ID objects from Dev to Quality
in PI 7.0 Using CTS Transport System
Please any one Guide me
with Proper Screen shots it may so helpful to me
Thanks and Regards,
Naresh K

Check below link for CTS configuration
Transporting Objects from SAP NetWeaver PI by Using CTS - Transporting ESR Content and Objects of Integration Directory …
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7078566c-72e0-2e10-2b8a-e10fcf8e1a3d?QuickLink=index&…

Creating business services in integration directory

Hi
When business services are created in integration directory - these business services are not tied back to entries in the SLD - i.e we can create entries for business services directly in integration directory without having to import them from SLD.
Now, when we migrate - from Dev environment to other landscapes - my understanding is that these business service entries are going to be migrated with the same names -and no transport target entries / validations is made during the target system import time - which happens in case of business systems having entries in SLD....
Could anybody out there - clarify these thoughts about business service entries
Thanks in advance - for your time .

Hi Karthik,
Check out these help file links, hope this will help you:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/7d/6b82cd0d1aef48ab5953524c9cc5b2/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/7d/6b82cd0d1aef48ab5953524c9cc5b2/frameset.htm</a>
http://help.sap.com/saphelp_nw2004s/helpdata/en/e6/908d3f7057eb0ce10000000a114084/frameset.htm]
Regards,
Subhasha ranjan

No service for system SAPNID, client 800 in Integration Directory

Hi All,
I am getting No service for system SAPNID, client 800 in Integration Directory in tRFC monitor (SM58).
My scenario is IDOC to File.
I did following step in R3.
1. Created RFC destination pointing to XI systems (name:XID)
2. Created IDOC port (name: SAPNID) and use above (XID) RFC in RFC destination.
3. Create Partner Type LI (Partner No. 3000) and add message type ORDERS, set the receiver port (SAPNID) created above.
XI Side.
1. Create Technical System (Name : XID)
2. Business Systems (Name: R3XID)
3. In Integration Repository.
 Created Data Type
 Import IDOC ORDERS.ORDERS04
 Created Message Interface
 Created Message Type
 In Mapping Object created Message Mapping and Interface Mapping.
4. In Integration Directory
 Created the Scenario (name : FILE_FROM_IDOC)
 Assign Business Systems as R3XID
 Create communication channel(name: FILE_ORDERS_COM_CHNL)
 Create Receiver Determination
 Interface Determination
 Receiver Agreement.
IDOC is triggered correctly but in tRFC monitor I am getting following error
No service for system SAPNID, client 800 in Integration Directory
With regards
Sunil

Hi Udo/Renjith and Rakesh,
Thanks for quick reply and appreciate you help.
Now I can say that there is some problem with my Technical Systems or Business Systems, let me give you details regarding my Technical/Business systems.
During post-Installation i created Technical/Business System, following are the details regarding these systems.
Technical Systems.Detail
System Name: XID
System Home: crmides
Installation Number: INITIAL Change...
Release: 640
Description:
Administrative Contact:
TMS Domain:
TMS Transport Group Name:
Clients: 100 800 Add...
Message Server: XID crmides
Central Application Server: crmides_XID_00
Secondary Application Servers: Add...
Internet Transaction Servers: Add...
Installed Products: SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
Add...
Installed Software Components
Business Systems:
1. R3XID
2. SAPNID
Earlier I have only one Client (100) and One Busines Systems (R3XID)
My XI Systems is XID Host : crmides Client : 100 System Number : 00
My R3 Systems is NID Host : netbw Client : 800 Systems Number : 02
Business Systems Detail
Name: R3XID
Description:
Administrative Contact:
Business System Role: Integration ServerApplication System
Pipeline URL:http://crmides:8000/sap/xi/engine?type=entry
Integrated Business Systems: SAPNID
Group: (No Group Assigned)Edit Groups...
Transport Targets:
Technical System: XID on crmides Change...
Client: 100 of XID
Logical System Name: SAPNID
Installed Products: SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
Software Components: ABC, 1.0 of knack
R/3 CORE 4.5B
SAP ABA 4.6C
SAP ABA 640
SAP APPL 4.6C
SAP BASIC JAVA LIBS 6.30
SAP BASIS 4.6C
SAP BASIS 6.40
SAP GUI FOR WINDOWS 4.5B
SAP GUI FOR WINDOWS 4.6C
SAP GUI FOR WINDOWS 6.20
SAP HR 4.5B
SAP HR 4.6C
SAP ITS 4.6B
SAP ITS 4.6C
SAP J2EE ENGINE 6.30
SAP J2EE ENGINE CORE 6.30
SAP JAVA TECH SERVICES 6.30
SAP JCO 6.30
SAP SOFTW. DELIV. MANAGER 6.30
XI ADAPTER FRAMEWORK 3.0
XI CONNECTIVITY SE 3.0
XI TOOLS 3.0
During Post Installation I had one Technical Systems (XID) and one Business Systems (R3XID), after that I created one more Business Systems (SAPNID).
SAPNID Business Systems Detail
Name: SAPNID
Description:
Administrative Contact:
Business System Role: Application System
Related Integration Server: R3XID
Group: (No Group Assigned)
Transport Targets:
Technical System: XID on crmides Change...
Client: 800 of XID
Logical System Name: SAPNID
Installed Products: SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
Software Components: ABC, 1.0 of knack
R/3 CORE 4.5B
SAP ABA 4.6C
SAP ABA 640
SAP APPL 4.6C
SAP BASIC JAVA LIBS 6.30
SAP BASIS 4.6C
SAP BASIS 6.40
SAP GUI FOR WINDOWS 4.5B
SAP GUI FOR WINDOWS 4.6C
SAP GUI FOR WINDOWS 6.20
SAP HR 4.5B
SAP HR 4.6C
SAP ITS 4.6B
SAP ITS 4.6C
SAP J2EE ENGINE 6.30
SAP J2EE ENGINE CORE 6.30
SAP JAVA TECH SERVICES 6.30
SAP JCO 6.30
SAP SOFTW. DELIV. MANAGER 6.30
XI ADAPTER FRAMEWORK 3.0
XI CONNECTIVITY SE 3.0
XI TOOLS 3.0
I do not know whether SAPNID is required or not, earlier I used R3XID as Business Systems at the time of configuration now I changed it to SAPNID. I am getting the same error in both the case.

Unable to retrieve BPM in Integration Directory

Hi Experts, i got a problem like this. I have already created my design object (BPM, Interfaces, Mapping, etc) in Integration Repository. Then i am going to start working on the Integration Directory (Configuration) ... However, when i try to create New Integration Process in Integration Directory, and i already choose my Integration Process from the list of my IP in my repository, when i want to confirm it, i got this following error:
Unable to transport object Integration Process IP_MM096 | <my namespace> of type RepBProcess from application REPOSITORY on system REPOSITORY. Detailed information: Attempt to serialize the generic part of object Integration Process IP_MM096 | <my namespace> failed(serialization problem)
Anybody know or has an idea what is wrong with this?
NB: my Integration Process name is IP_MM096
thnks guys....

I just finish redo the IP in my production system in IR. Then when i try to retrieve that new IP, i got the same message....I am out of idea what should i do next. Anyone? The thing is, i dont know the error mean...It just dont give enough information...
Unable to transport object Integration Process IP_MM096_NEW1 | of type RepBProcess from application REPOSITORY on system REPOSITORY. Detailed information: Attempt to serialize the generic part of object Integration Process IP_MM096_NEW1 (serialization problem)

Unable to Delete PI Integration Directory Objects

Hello Experts,
We are facing a strange problem in our system. When we wanted to delete some unwanted objects from Integration Directory from my user, I can't see any more in Object View, however can see in Change List with some X (red) mark before the object.
These objects are still remain and visible to other users in the respective scenarios.
When we try to delete from there, a confirmation pop-up dialog appears stating that data/object will be lost, when confirm (it says it is deleted) but remains in the change list.
We have verified in the object locked list, but there also nothing was locked.
Regards, Alex.

Hi,
You need to activate the change list where the deleted objects are present for the deletion to reflect in the runtime cache.
Also, if these deleted objects have been transported to higher environments, you would need to transport the deleted objects for the deletion to reflect in the higher environments as well.
To do this, when creating the transport, keep the check box "Include deleted objects checked". Then you can select the deleted objects to be included in your transported (deleted objects would be indicated with a bin icon).
Regards

Import CTS+ transport into Portal failed with Returncode:'12'

Hi, Gurus!
I have encountered the problem while deploying CTS+ transport to the Portal (system XO3): Returncode:'12' class java.io.IOException:
The file (
\solman.mycompany.com\sapmnt\trans\data\BIGK900007\ctsplus.par) does not exist on the filesystem.
Full log text:
| ######################################
| Deployment
| Transport request : BIGK900007
| System : XO3
| tp path : tp | Version and release: 372.04.71 700
| Deploy Service called with following parameters:
| CommunicationData-Type:0
| CommunicationData-Address:http://portalXO3.mycompany.com:50218
| CommunicationData-Host:portalXO3.mycompany.com
| CommunicationData-Port:50218
| CommunicationData-User:'filled'
| CommunicationData-Password:'filled'
| Deployable(0) | Deployable-Type:0
| Deployable-Id:
solman.mycompany.com\sapmnt\trans\data/BIGK900007/ctsplus.par
| Returncode:'12' | class java.io.IOException:The file (
\solman.mycompany.com\sapmnt\trans\data\BIGK900007\ctsplus.p
| >>>ar) does not exist on the filesystem.
| Deployment
| End date and time : 20100106154329
| Ended with return code: ===> 12 <===
| ######################################
The file ctsplus.par does exists at the right place and available from the Portal machine.
Especially strange looks the Deployable-Id: *
solman.mycompany.com\sapmnt\trans\data/BIGK900007/ctsplus.par*
Maybe the different slashes "\" and "/" are the cause of the porblem? Both systems (Portal and Solution manager) run on Windows 2003 Servers.
I have checked the "Note 1232674 - class java.io.IO exception during import" and set up the full control permissions to access "\sapmnt\" for the local (solman) user SAPServiceXO3 but it does not help.
I've created a local "SAPServiceXO3" user in the server of Solman and have given to it highest permissions to the file share. Has anybody any idea how to resolve the problem?
Thanks in advance.
Edited by: Mikhail Palstsianau on Jan 28, 2010 8:47 AM

Hi,
Due you have common trans directory for all the system ???
Thanks
Anil

Refresh System Data in Integration Directory PI 7.11

Hey,
I have setup a new technical system and a business system in SLD, but now I still can't find it in Integration Directory.
I knew from the later PI Version, that there was an option to transfer SLD data to integration directory, but now I can't find it
anymore.
Can anybody help?
Thanks!
Michael

I have setup a new technical system and a business system in SLD, but now I still can't find it in Integration Directory.
I knew from the later PI Version, that there was an option to transfer SLD data to integration directory, but now I can't find it
Tools (or right-click in ID) --> Assign Business System --> follow the wizard...it will assign the business system from SLD to ID

Basis: No service for system , client in Integration Directory??

Hi All,
IDocs from SAP QA are not being sent to PI QA. I see error in SM58 in SAP QA as: No service for system , client in Integration Directory. Please dont jump to asnwers by looking at above error. I could fix that, but thats not the real problem.
Because I have checked
1) SLD home page ---> Technical Landscape --> Select Web AS ABAP --> Select the technical system --> Clients ---> Click on the client used as Business system --> Here look for the logical system is defined (No Problem here, as logical systems is defined).
2) ID---> Click on Objects --> Service Without party/Party > Double click on business system>On the tright side--> Service --> Adapter specific Identifiers ---> Check IDoc Adpater, Logical System (No Problem here as I see Logical System).
But I can't find values R/3 System ID and Client under "IDoc Adapter and RFC Adapter". I think thats problem here, when I click on "Compare with SLD" in edit mode, values are not getting populated into R/3 System ID and Client. It makes think there is communication error from ID to SLD. How I do confirm if its the real problem?
3) Checked Note 940313 - IDoc adapter: Error messages in SM58, No problem here
4) Did SLDCHECK from PI QA, works fine, no problems here
Both PI DEV and PI QA pointing to the same SLD. When I send IDocs from SAP QA to PI DEV, everything works fine. I can't send IDoc from SAP QA to PI DEV (changed RFC des to point to PI QA, it shouldn't be a problem).
How do I find out if communication between PI QA - ID is workign fine with the SLD? Is there any other issue you can think of causing the above error?
Thank You,
Indrasena Janga

*I have trobleshooted a similar issue. In my case also the tRFC failed with the error "No service for system SAP, client 400 in Integration Directory".There were 11 IDOCS associated with this tRFC and when I saw control record of first IDOC,in sender information ,the sender partner number was wrong.Instead of "SAPSID",it was found as just "SAP".Where as the remaining ten were maintained with correct sender partner number.remaining ten IDOCS were dependant on first one.
Thanks,
Varada Reddy

CTS transport in Integration Directory

Similar Messages

Maybe you are looking for