CTS Transport Mechanisam ?

Hi Experts,
I need to Move ID objects from Dev to Quality
in PI 7.0 Using CTS Transport System
Please any one Guide me
with Proper Screen shots it may so helpful to me
Thanks and Regards,
Naresh K

Check below link for CTS configuration
Transporting Objects from SAP NetWeaver PI by Using CTS - Transporting ESR Content and Objects of Integration Directory …
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7078566c-72e0-2e10-2b8a-e10fcf8e1a3d?QuickLink=index&…

Similar Messages

Communication channel parameters are not tranported in CTS+ transport

Hi,
My scenario is MDM to jms.
we have configured the cts+ transport in our system.
We transported the ESR and ID objects from development to Quality.
But in the sender mdm communication channel the everything is getting transported except Repository password.
when i checked in the quality system the Repository password was blank.
And receiver jms communication channel details are in
dev system
IP Address or server Name:135.12.14.12
server port                          :3321
Queue manange name       :RRTYRKB
channel name                  :KDIEKE.MDM
Quality System
IP Address or server Name:localhost
server port                        :1414
Queue manange name       :QM_hostname
channel name                    :S_hostname
i want know whether this is the case when we do the cts+ transport?
if it is the case should i edit the objects in the Quality sysem(which i don't want to do).
Thanks.
Regards,
Muniyappan.

Hi,
>>>if it is the case should i edit the objects in the Quality sysem(which i don't want to do).
communication channel attrubites always get reset in the new env - TEST, PRD, etc.
and you always need to fill them once more - this is the normal way
otherwise - would you like to use DEV parameters on PRD system ?
maintaining the channel attributes is a typical task on all landscapes
Regards,
Michal Krawczyk

Diffrence between File Transport and CTS+ Transport in PI

Hi Guys,
Can you please explain me the diffrence between File Transport and CTS+ Transport in PI.
What are the advantages of CTS+ Transportation over FILE Transportation...
Thanks,
Siva...

The file transfer will simply export the objects to a TPZ file, allowing you to import on the target system. This requires manual copying and paste of the object and have no further control.
CTS+ on the other side, allows the environment to maintain transport requests with control over objects audit. For example, an object must be created on DEV, then after being developed it must go to QA system and will only be sent to PROD when this object was approved by the respective team on QA. For more information on CTS+, please check the help page below.
http://help.sap.com/saphelp_nwpi71/helpdata/en/9a/775de286874bc78dcb1470bc80f0f9/frameset.htm
Also the documentation below will provide a more complete overview and configuration steps for the CTS+ usage
"http://www.sdn.sap.com/irj/scn/go/portal/prtroot/com.sap.km.cm.docs/library/application-lifecycle-management/lifecycle-management/software-logistics/new%20features%20in%20sap%20enhancement%20package%201%20for%20sap%20netweaver%207.0.pdf"
Please also refer to the SDN thread below
How to move PI objects in IR and ID from DEV to QAS

Import CTS+ transport into Portal failed with Returncode:'12'

Hi, Gurus!
I have encountered the problem while deploying CTS+ transport to the Portal (system XO3): Returncode:'12' class java.io.IOException:
The file (
\solman.mycompany.com\sapmnt\trans\data\BIGK900007\ctsplus.par) does not exist on the filesystem.
Full log text:
| ######################################
| Deployment
| Transport request : BIGK900007
| System : XO3
| tp path : tp | Version and release: 372.04.71 700
| Deploy Service called with following parameters:
| CommunicationData-Type:0
| CommunicationData-Address:http://portalXO3.mycompany.com:50218
| CommunicationData-Host:portalXO3.mycompany.com
| CommunicationData-Port:50218
| CommunicationData-User:'filled'
| CommunicationData-Password:'filled'
| Deployable(0) | Deployable-Type:0
| Deployable-Id:
solman.mycompany.com\sapmnt\trans\data/BIGK900007/ctsplus.par
| Returncode:'12' | class java.io.IOException:The file (
\solman.mycompany.com\sapmnt\trans\data\BIGK900007\ctsplus.p
| >>>ar) does not exist on the filesystem.
| Deployment
| End date and time : 20100106154329
| Ended with return code: ===> 12 <===
| ######################################
The file ctsplus.par does exists at the right place and available from the Portal machine.
Especially strange looks the Deployable-Id: *
solman.mycompany.com\sapmnt\trans\data/BIGK900007/ctsplus.par*
Maybe the different slashes "\" and "/" are the cause of the porblem? Both systems (Portal and Solution manager) run on Windows 2003 Servers.
I have checked the "Note 1232674 - class java.io.IO exception during import" and set up the full control permissions to access "\sapmnt\" for the local (solman) user SAPServiceXO3 but it does not help.
I've created a local "SAPServiceXO3" user in the server of Solman and have given to it highest permissions to the file share. Has anybody any idea how to resolve the problem?
Thanks in advance.
Edited by: Mikhail Palstsianau on Jan 28, 2010 8:47 AM

Hi,
Due you have common trans directory for all the system ???
Thanks
Anil

CTS+ Transport Strategy

Dear all,
We are planning to setup CTS+ in our system landscape.
Please provide your inputs, on the pros and cons of this strategy.
Also direct me to links of CTS+ documents on SDN.
Thanks for the help.
Regards,
Younus

Hi,
CTS+ transport is like ABAP way of doing transport of ABAP objects in r/3..........after deploying CTS+ in your XI system, you can release your objects for CTS+ transport from IR, ID and then a transport request for it will be created for you, which you can then release and finally import it in target system.
Regards,
Rajeev Gupta

CTS Transports in Portal

Hi
Using CTS..how can i do transports in portal
Thanks

Using Enhanced CTS (CTS+), you can transport portal and NWDI transports with transaction STMS.
After you have done the required configuration for enabling CTS+ in your landscape, portal or NWDI transports can be attached to a CTS transport request. Once you have attached your portal or NWDI transport to your CTS request, the process is similar to transporting any ABAP transports.
You can check out the following blog and article on how to configure this:
Enhanced CTS in close coupling configuration for portal environment
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
Thanks,
Shanti

CTS+ Transports in SAP PI 7.1

Hi experts,
we have a new installed SAP PI 7.1. Our scenario is that we have a single SLD for each PI System on dev, test and prod.
Now we are facings some troubles regarding the SLD setup. Our target is to use CTS+ to transport IR and ID objects. In the how to guides I found in SDN I found always settings within the visual admin to get this scenario run. But as I understood there is no more visual admin in SAP PI 7.1.
What are the required steps to connect my sld from dev --> test --> prod and what is additional to perform to get my ID objects transported from dev --> test --> prod.
Regards,
Björn

Hi Bjorn,
CTS+ is a transport mechanism used to transport NWDS, IR, ID objects.....basically JAVA objects......
For CTS+ and NWDI...check it :
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d96022-9df5-2910-90b8-8e0580e0987e?overridelayout=true
Regards,

CTS+ transport to an air-gapped system

Hi all,
We had previously configured CTS+ to work, enabling transport from development system to QA.
However, our production environment is airgapped from the dev servers for security reasons.
We copied the cofiles and datafiles to the corresponding folders in production, and did the following configurations in the prod server:
1. install CTS Deploy Web Service in JAVA stack of the TMS host
2. Configure HTTP Connection CTSDEPLOY in SM59 in the TMS host
3. Configure Logical Port for the web service in transaction LPCONFIG
4. Defined and configured non-abap TARGET system in STMS
The Transport Requests can be added to the buffer of the non-abap system. However, when I try to import those TRs, the transport started, and then nothing happened. The log files do not show anything.
Anyone has any idea on why this is so? Can CTS+ work on a system that is airgapped from its source?
Did I miss out on any configuration steps?
Thanks for all the help!

Hi Gordon,
Go thru this [Link|http://help.sap.com/saphelp_nw70/helpdata/en/45/ec25370fdc3481e10000000a1553f6/frameset.htm]. You will get the details.
You can use this for your reference.
Check this document - [How to set-up and use the CTS+ in Portal Environment|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3].
This is the document for Best practices to implement CTS+ => [Link|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10456aac-44f7-2a10-1fbe-8b7bcd7bcd58]
Actually I was going thru the details on CTS+ and found the above. Thought these might help you.
Regards,
Srihari

CTS transport in Integration Directory

Hello,
We are running NW70 SP13 and have fully configured CTS+ as per the SAP documentation for SP13 specifically.
In Integration Repository we can see the export option using CTS but in the Integration Directory for scenarios we do not see the "Transport with CTS mode" option...it is defaulted to File Transport and the field is not changeable.
Any ideas?

In the exchange profile make the following entry
com.sap.aii.ib.client.properties: com.sap.aii.ibrep.core.cms.,com.sap.aii.ibdir.core.cms.
for Integration Repository com.sap.aii.ibrep.core.cms.*
for Integration Directory com.sap.aii.ibdir.core.cms.*
Note:
Do not replace existing values; add the new value to the existing values.
Note:
These settings specify that the CMS transport entries are transferred from the server to the web client front end.
Refresh the Exchange profile parameter.
You can refer to link below
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Try now.
Gaurav Jain
Reward points if answer is helpful
Edited by: Gaurav Jain on Jun 17, 2008 10:01 AM

CTS+ - Transport Organizer Web UI

Hi,
I am trying to configure CTS+ for our landscape with Solman (Stack 15) as the Domain Controller.
I have not added other transport groups yet. But I am not able to get to the Transport Web UI through
STMS -> Environment -> Transport Organizer Web UI
If I directly type in the URL I can see it:
http://<host>:<port>/sap/bc/webdynpro/sap/cts_browser?sap language=EN&SYSID=<SID>&APPLICATION=OTHERS
Any ideas?
Thanks
S.

Hi Shabnam,
Recently I got this problem. Previously, I managed to get the screen from STMS. Now, I have type the URL directly.
Any idea?
Rgds,
Hapizorr Rozi Alias

Issue related to CTS+ Transports

Hello,
We have completed CTS+ configuration on PI (EHP1 SAP Netweaver 7.0) following SAP CTS+ How-To-Guide.PI Development is Domain controller and all paths and parameters in SAP Exchange profile are maintained.
Transport request is successfully created from PI with no errors. Also If we create empty Non ABAP transport u2013 with no object included it works fine.
Now we are facing some issue related to release of Non ABAP transports (transport remains in status u201CRelease Startedu201D for hours and no process/file update at OS) and no export file is created in path maintained.
For release started status issue we were able to change the status of same to modifiable after 32 hours from release started status to sort this issue.
But we are unable to release transports successfully with these non-ABAP objects.
Please help.
Thanks & Regards,
Nisha

Thanks for quick reply Tom!
We have performed EHP1 Upgrade few weeks back and below are SP levels - so I don't think any issue related to patch levels:
SAP_ABA     701     0007     SAPKA70107     Cross-Application Component
SAP_BASIS     701     0007     SAPKB70107     SAP Basis Component
PI_BASIS     701     0007     SAPK-70107INPIBASIS     Basis Plug-In
ST-PI     2008_1_700     0003     SAPKITLRD3     SAP Solution Tools Plug-In
SAP_BW     701     0007     SAPKW70107     SAP Business Warehouse
ST-A/PI     01M_BCO700     0000          -     Servicetools for other App./Netweaver 04
I am trying to check SAP notes as well.
Thanks & Regards,
Nisha

CTS+ Transports and PI

Hi,
Should PI transports (ESR/DESIGN Java Objects "TPZ") now follow the same route as ABAP transports as they can now be linked to ABAP transports.
Traditionally in PI I would;
1. Transport out of DEV -> TEST with transport targets set.
2. Activate the change and test
3. Build a new transport in TEST for PROD with the same object with transport targets set TEST->PROD
We are using 3 SLD'S DEV - TEST - PROD if the DEV objects exported are applied to PROD (like ABAP after testing). The SLD in prod needs to know about DEV business systems.
Can anyone shed any light ?

Sorry I think you missed the point....
Does using CTS+ change the way transports work for TPZ PI Objects ...
Do you apply a transport created in DEV directly to both TEST and PROD - like ABAP.
or
Do you apply the transport to TEST then re-export from TEST into PROD - like CMS typical way of doing PI transports ..
My issue is, if you transport like ABAP -> apply transports in DEV directly to PROD as well as TEST the SLD in PROD needs to know about the DEV Business systems in order to apply successfully, this would seem like the sensible way to manage software logistics when CTS+ is involved as both ABAP and Java Objects are tied together, but I dont like having DEV systems in the PROD SLD.

CTS+ Transportation?

Hello All,
My client has configured CTS+ transpotation, so i want to know how to transport the objects using CTS+.
Is only CTS+ is enough to transport Development objects to Quality, or do client need to do configure CMS in it.
Please Reply with step by step process of transportation.
Thanks and Regards,
Chinna

CTS+ is enough to transport developments objects including IR, ID and SLD objects
Few useful links
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0263190-9443-2c10-1589-ef8b672b5edd&overridelayout=true
https://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/60ac25e9-d200-2a10-d087-c3f5665a7ca0
Select CTS+ option instead of file File while export/import objects in XI, CTS+ browser will help you with creating/releasing transport requests

CTS transports approval

Hello All,
We have set up the transport workflow CTS in our system landscape. Currently the workflow works perfectly fine for approvals and moving transports across the system in the landscape.
However, the users need to login to the SAP R/3 inbox to be able to approve incoming transport requests. Is there a way wherein we could enable the approval process may be through web or SAP portal.
Has anybody implemented this in the past. Please assist.
Any thoughts or inputs will be highly appreciated.
Thanks and Regards,
Samta.

Implemented through UWL.

PI 7.11: Import of CTS+ transport fails (Integration builder only)

Hi,
I've released a transport from DEV to QUAL system.
I've imported via STMS.
But I don't see the transported objects.
The imported change list is already closed and I cannot activate the contained objects.
There's no open change list available for my user.
When I try to transport those objects again, I get an error in STMS:
com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Unable to transfer object Configuration Scenario SetEmployeeSOAP (DirContext) to change list 'XI 7.1 Import' (c6a9ea7b-57db-11e1-a930-000025876142) since object is already in your change list 'XI 7.1 Import' (e1586c72-57c2-11e1-bf9c-000025876142).
How can I activate the objects contained in the mentioned change lists?
Thanks in advance!

Unfortunately, I've crowned too early
The target systems are not filled in correctly.
We have a 3-tier environment (DEV, QUAL, PROD).
I've setup the same SLD settings in SLD in DEV and QUAL system.
SAP_DEV has target SAP_QUAL and SAP_QUAL has target SAP_PROD.
But in the scenario that I've imported into PI QUAL it didn't replace SAP_DEV with SAP_QUAL (e. g. in CC, Receiver determination etc.).
What can be the reason for that?
Are my target settings not correct?

CTS Transport Mechanisam ?

Similar Messages

Maybe you are looking for