Cu 50 Inconsistent characteristic value assignment Message no. C1821
Dear All
sorry I come from Taiwan,my English is not well
I have a question for SAP PP
I study Make-to Order Production with Variant Configuration
I read paper Make-to order Quotation Processing with Vaniant Procing(663)
and In accordance with the file operations
but when i According to cu50 display an error message:
Inconsistent characteristic value assignment,Message no. C1821
creat pland order in tcode co08 display an error message:
No valid BOM exists
i choices "no" display an error message:Error or warning occurred during master data transfer
I do not know how to resolve
Please help me thank you very much
Dear All
Thank you for your help
I found the problem
1.cu50 error message Inconsistent characteristic value assignment,Message no. C1821
ans: the paper Bast Practices Make-to-Order Quotation Processing with Variant Pricing(663) , page 85
Dependency name : YI_PC_YI_005_SELE_OPT
Syntax : $root.YI_004_ADD_OPT='01'
2.creat pland order in tcode co08 display an error message:No valid BOM exists
ans :
a.Tcode cu42 , in BOM application select SD01 for Production-General
b. IMG OPL8 BOM Application sele SD01
Similar Messages
-
Error at sales order: Inconsistent characteristic value assignment
Hi SAPians
There is a problem in variant configuration. I have configurable materials at sales order level with BOMs and super BOMs. When I am executing the scenario, not able to process further after selecting characteristic values for a configurable material. The error saying " Inconsistent characteristic value assignment". I checked all the relevant master data, every thing is okay. But I am not able to proceed further. Can any one provide some valuable inputs for this.
Raksha.Hi
Did u create variant table (CU61) if not plz and try to make it by tick mark of Decision table..
u can check assignmebt consitance thru CU60 ..if there again blank plz maintain it manually..
basically wt happened during creation of Characteristics and assignment of value in value tab .. there is indicator ..which influence assignment consistance..
hope u may get clue.
correct me if i went wrong..
thanks
mk -
Error in Release strategy : Inconsistent Characteristic Value assignment
Hello Gurus ,
Good Day ...
Need your help in release strategy in purchase order .
Thanks in advance .......
Characteristics characteristics value
R2R_PURCH_ORD_TYPE NB
R2R_PURCH_GRP1 001
R2R_PURCH_ORD_VALUE 0,00 - 1000,00 USD
1001,00 - 2000,00 USD
2001,00 - 10000,00 USD
Class assigned char
Z_CLASS R2R_PURCH_ORD_TYPE
R2R_PURCH_GRP1
R2R_PURCH_ORD_VALUE
Rel grp assigned class
PH Z_CLASS
rel grp rel codes
PH 1 -director/VP
PH 2 - manager
PH 3 - buyer
rel grp rel strategy
PH A1
PH A2
PH A3
Now in SPRO -
> define Release Procedures for Purchase ORder -
> Release Strategies
PH A1 Release Strategy 1 (rel. prereq , rel statuses, classification , rel simulation ) working fine
PH A2 Release Strategy 2 (rel. prereq , rel statuses, classification , rel simulation )
ERROR MSG: INCONSISTENT CHARACTERISTIC VALUE ASSIGNMENT
DETAILS :
You want to change the value assigned to a characteristic. However, the change causes inconsistency, so the new value is not allowed.
The inconsistency may be for the following reasons:
A precondition or selection condition is violated.
The characteristic is a single-value characteristic, and different values have been set by constraints, actions, or procedures.
In classification, inconsistencies occur when you change the value set of a characteristic if objects or classes have already been classified with values from the previous value set.
Procedure
Choose Inconsistencies to see what triggered the inconsistency. You can also use the explanation facility for more information.
Delete the values that triggered the inconsistency.
You can only change or delete a value or value set that has already been used to classify objects if you delete the existing allocations.
PH A3 Release Strategy 3 -
> SAME AS ABOVE
regards,
ajayHi,
Inconsistency due to different "VALUE" in the Release Strategy & "VALUE" present in the Release Characteristics . Check details with value assignment with designed Strategies.
Also keep following VALUE Release Characteristics for value
<=1000,00.00 USD
1000,00.01 USD- 2000,00 .00USD
2000,00 .01- 10000,00.00 USD
instead of (0,00 - 1000,00 USD,1001,00 - 2000,00 USD,2001,00 - 10000,00 USD )
Regards,
Biju K -
DMS - Inconsistent characteristic value assignment
Dear experts,
I've some DMS documents with an 'Inconsistent characteristic value assignment': two values for a single-value characteristic.
I want to correct those documents, but I don't to change AUSP directly. I've tried BAPI_DOCUMENT_CHANGE2, but without results.
Thanks in advance for any help.
Regards,
sb.Thanks Charlie.
Yes, this is for PR release strategy. I have checked OMGQCK, there is no inconsitency related to char value assignment. But when I tried to assign char values in SAPL0ME2, there is hard error C1821.
I also tried to delete the char from the class but the error is still there. Any ideas?
Thanks
JM -
Inconsistent characteristic value assignment
Hi
When I am trying to change the value of the characteristic for relase strategy ; the system is giving me error
"Inconsistent characteristic value assignment"
Kindly reply meCheck this answered link:
Inconsistent characteristic value assignment
Re: PO Release Strategy on Value Based -
Characteristic Value Assignment in Sales order
Hi Pals,
I am using the Variant configuration scenario in the sales order. My problem is, when ever i try creating a new sales order and enter a material, it suppose to display the Characteristic Value Assignment screen but for me it is showing the "Display Characteristic Values" Screen. Because of this i am unable to enter the data at the sales order level. what might be the problem for this case.
Kindly help me out in this issue.
Thanks & Regards,
Srinivas.DDear,
I hope the following link will help u in giving a good understanding of Characteristic values
help.sap.com/printdocu/core/Print46c/en/data/pdf/CACLCHR/CACLCHR.pdf
Regards,
R.brahmankar -
How to get Characteristic Values assigned to the line item of Sales Order?
Hi,
I want to get the Characteristic Values( Variant Configuration )assigned to First Line Item of Sales Order.
I was using the Fn. Mod.: VC_I_GET_CONFIGURATION_IBASE,
this fn. mod. giving all the Characters but not the assigned characteristic values.
Is there any other way to find characteristic values of sales order.
Thanks,
vinayak.
Message was edited by: vinayaga sundaramFor example, please see this example program.
It lists the characteristic names, the values, and the description of the values which are tied to a sales document.
report zrich_0001.
* Internal Table for Characteristic Data
data: begin of i_char occurs 0.
include structure comw.
data: end of i_char.
data: xcabn type cabn.
data: begin of xcawn,
atwtb type cawnt-atwtb,
end of xcawn.
data: xvbap type vbap.
parameters: p_vbeln type vbap-vbeln,
p_posnr type vbap-posnr.
start-of-selection.
select single * from vbap into xvbap
where vbeln = p_vbeln
and posnr = p_posnr.
clear i_char. refresh i_char.
* Retrieve Characteristics.
call function 'CUD0_GET_VAL_FROM_INSTANCE'
exporting
instance = xvbap-cuobj
tables
attributes = i_char
exceptions
instance_not_found = 1.
loop at i_char.
clear xcabn.
select single * from cabn into xcabn
where atinn = i_char-atinn.
clear xcawn.
select single cawnt~atwtb into xcawn
from cawn
inner join cawnt
on cawn~atinn = cawnt~atinn
and cawn~atzhl = cawnt~atzhl
where cawn~atinn = i_char-atinn
and cawn~atwrt = i_char-atwrt.
write:/ xcabn-atnam, i_char-atwrt, xcawn-atwtb.
endloop.
Regards,
RIch Heilman -
Characteristic value assignment
Hi,
Can any body brief me on multiple values assignment in the chearacteristic?
I have go throug help but it is not clear to me hence explain with example.
Thanks,
Seema S.P.Hi,
The multiple values assigment allows you to select more than one value using the Checkbox.
just enable the multiple values option and give the list of values in the Values tab.
add this Characteristics to a Class.
Add this class to a document.
Create a document (DIR) in that Additional data tab you can find the characteristics and that allows you to provide more than one value.
Regards,
MRK
(If u feel its useful pls reward points) -
Inconsistant value assignment.
Hi Everybody,
when iam entering the values for a character, it is showing the message as "Inconsistant value assignment. I have checked in CT04. The data type also showing as Numeric.
please advise.
Regards,Hi,
Check the decimal point,Check the Template format of your character.Also the user profile say 1,2987766.78 or 1.23355667,34.
Regard,
Raj -
Top node of XML message needs value assign to it - how to do it ?
Hi,
I have an issue where the top node of my XML message needs to have a value assigned.
i.e.
<REPORT>xxxxxxxx
<ID>xxxxx</ID>
<CUST>xxxxx</CUST>
</REPORT>
Is this possible using standard graphical mapping or will I need to resort to XSLT mapping to achieve this ?
Cheers
Colin.Hi,
At the beginning I thought that this is not well-formed XML message, did a test in XMLSpy and it looks like it a well-formed XML message.
> <REPORT>xxxxxxxx
> <ID>xxxxx</ID>
> <CUST>xxxxx</CUST>
> </REPORT>
I created XSD that describe this message, imported into IR, did some basic (one-to-one) message mapping (output and input structures are the same).
Output message:
<?xml version="1.0" encoding="UTF-8"?>
<REPORT>
dfasdf
<ID>12</ID>
<CUST>dfff</CUST>
</REPORT>
After mapping I got:
<?xml version="1.0" encoding="UTF-8"?>
<REPORT>
<ID>12</ID>
<CUST>dfff</CUST>
</REPORT>
Looks like you should rather forget the graphical mapping
Jakub -
Retireve Characteristic values that are assigned to a grid
Hi All,
Am creating a query to display all characteristic values that are assigned to an AFS Grid. The selection criteria is the AFS Grid which will return the characteristic values. I used the tables J-3APGHD - AFS Product Grid entries and CAWN - Characteristic values for this purpose. However I am unable to join these two tables. Is there any other way to do it or an interim table that would help me link the above two tables. Thanks i advance.
regards,
ImranHi,
Could you tell me how did you solve this problem, please?
(Query between J_3APGHD and CAWN)
Thanks -
Assign Object to class with characteristic values ?
Hi All,
I want to assign object to class with characteristic values. I found CL20N transaction for performing the same. Is there any BDC , BAPI to upload the same.
Thanks & Regards,
Navneeth K.Hi,
try as below
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
EXPORTING
classtext = 'X'
classtype = w_classtype "Class type
language = sy-langu
object = w_object "Object Matnr + Batch
objecttable = 'MARA' "As requirement
change_service_clf = 'X'
inherited_char = ' '
change_number = ' '
TABLES
t_class = t_class
t_objectdata = t_objectdata
i_sel_characteristic = i_sel_characteristic
t_no_auth_charact = t_no_auth_charact.
IF sy-subrc <> 0.
ENDIF.
* Create with reference-----------------------
w_objectkeynew = wa_inputfile-to_matnr.
CALL FUNCTION 'BAPI_OBJCL_CREATE'
EXPORTING
objectkeynew = w_objectkeynew
objecttablenew = 'MARA'
classnumnew = w_classnum
classtypenew = w_classtype
TABLES
allocvaluesnum = t_allocvaluesnum
allocvalueschar = t_allocvalueschar
allocvaluescurr = t_allocvaluescurr
return = t_lreturn.
"or
BAPI_OBJCL_CHANGE Classification BAPI: Change Assignment
Prabhudas -
Assigning dependencies & procedures to characteristic value
Dear experts
Please how do i rightly assign a procedure created in a dependecy to a characteristic value.
I have created the procedure & dependency but this is not being calculated in the characteristic description1. IN CU01 createa global dependency
2. in ct04 in the charc value area assign the dependency there.
let me know feedback
reg
dsk -
How to Check Characterstic Values assigned for a material
Hi ,
My requirement is , to check each and every material entered in the selection screen and characterstic values assigned to this,
I dont need characterstic values for a material, i have to check whether characterstic values assigned or not , if not i have to give a message..
I used CLAF_CLASSIFICATION_OF_OBJECTS FM for getting charactersic values
it is giving NO classification found , but for tghat material classification is existing subsequently characterstic values are also there, i passed material no with leading zeros also.
i used WMCL_MAT_READ_CHAR_VALUES FM also , but it is giving No charcterstic values found for that Material but characterstic values are assigned for that Material..
Could u please find out ,where i am missingTHIS MATERIAL HAS CLASSIFICATION VIEW AND CHARACTERSTIC VALUES ALSO MAINTAINED
DATA : MATNO TYPE AUSP-OBJEK,
L TYPE I,
T_CLASS TYPE STANDARD TABLE OF SCLASS ,
T_OBJECTDATA TYPE STANDARD TABLE OF CLOBJDAT.
MATNO ='631165'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = MATNO
IMPORTING
OUTPUT = MATNO
"use this function moduel...
*Retrieve Batch class , characteristic name and values for Material
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
EXPORTING
class = 'ZCA2535'
classtype = '023'
features = 'X'
language = 'E'
object = MATNO "pass material number with leading zeros..
objecttable = 'MARA'
TABLES
t_class = t_class
t_objectdata = t_objectdata
EXCEPTIONS
no_classification = 1
no_classtypes = 2
invalid_class_type = 3
OTHERS = 4.
IF sy-subrc = 0.
ENDIF.
BUT IT IS GIVING NO CLASSIFICATION FOUND -
Populate Batch characteristic values in create sales order BAPI
Can anybody help me in populating the batch characteristic values using BAPI_SALESORDER_CREATEFROMDAT2?
I have checked the related notes provided by SAP, like, 567348 but it will be great if someone can send some code snippet on this.Subramanian, Brad and Raja.
Thanks for your suggestions its were useful, with
these i can resolve my problem.
!!! Best Regards !!!
Raja
I used the se37 to test bapis, is more easy and fast !!
and you can save data like variant, and you can simulate the real execution without write any code abap,
and re-process the times that you need,
when you know what fields you need you write your abap code faster.
Thanks !!!
Message was edited by: Noemi Huerta
Maybe you are looking for
-
how can i fix my mac book pro i bought in mid 2010, it is slowing down. the pin wheel does spin a alot.
-
Trying to play a DVD on my Mac causes it to freeze/crash. Dock is unresponsive can't cmd + Q or even force quit. I can move my cursor around the screen, but nothing is click-able. No spinning coloured wheel either. Have to hold power off and restart.
-
A665-s6050 will either go to sleep or shut down without any notice
I am at a lost and, of course, my warranty expired in July. Last week my laptop would just literally shut down by itself. Then when restarting it would just shut down again. The system then starting going straight through to see if it could fix why
-
see previous ??, somehow moved files for iphoto and it now appears empty. hoping to recover, have not backup in awhile... is there not a way to restore computer to past date, say last week?
-
Document Class with Flash Lite 4.0
I'm developing for Flash Lite (4.0) for the first time and I see that in the properties panel the Document Class section is grayed out. Does this mean that Flash Lite doesn't utilize a Document Class? If so, am I unable to use any external classes? I